path: root/installworld_oldk

#!/bin/sh
# -------+---------+---------+---------+---------+---------+---------+---------+
# Copyright (c) 2004  - Garance Alistair Drosehn <gad@FreeBSD.org>.
#
# All rights reserved.
#
#  Redistribution and use in source and binary forms, with or without
#  modification, are permitted provided that the following conditions
#  are met:
#  1. Redistributions of source code must retain the above copyright
#     notice, this list of conditions and the following disclaimer.
#  2. Redistributions in binary form must reproduce the above copyright
#     notice, this list of conditions and the following disclaimer in the
#     documentation and/or other materials provided with the distribution.
#
#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
#  ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
#  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
#  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
#  FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
#  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
#  OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
#  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
#  LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
#  OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
#  SUCH DAMAGE.
#
# -------+---------+---------+---------+---------+---------+---------+---------+
# $FreeBSD$
# -------+---------+---------+---------+---------+---------+---------+---------+
#
#   This script does a 'make installworld' using the *old* versions of all
# commands to do the work.  It expects that the new kernel has been installed,
# but that the system has not been rebooted (and is thus still running on the
# previous kernel).  This is useful when a major incompatible change is made,
# and you want to do an installworld that uses NFS-mounted directories for
# /usr/src and /usr/obj.  This script was written for the change to
# 64-bit time_t on FreeBSD/Sparc64, but it is not specific to that.
#
#   IMPORTANT: This script does require that you are NOT YET running on
# the new kernel that matches the 'world' that you want to install.
#
# -------+---------+---------+---------+---------+---------+---------+---------+

#   This script expects that it will be run from /usr/src, or an
#   equivalent (perhaps NFS-mounted) directory.
if [ -f MAINTAINERS -a -f UPDATING -a -f Makefile -a -f Makefile.inc1 ] ; then
    SOURCE_BWDIR="`make -V .OBJDIR`"
else
    echo "This script must be run from /usr/src!  (or equivalent)"
    exit 1
fi

DOMAKE=
DOMINI=
SETMINPATH=
SYMLINKS=
VERBOSE=
BADOPT=
while test $# != 0
do
    case "$1" in
    -M)   SETMINPATH=yes ;;
    -N)   DOMINI=no ;;
    -S)   echo "-S (symlinks) is ignored in installworld_oldk." ;;
    -Y)   DOMINI=yes ;;
    -y)   DOMAKE=yes ;;
    -n)   DOMAKE=no ;;
    -v)   VERBOSE=yes ;;
    *)    echo "Invalid option: $1" ; BADOPT=yes ;;
    esac
    shift 1
done
if [ -n "$BADOPT" ] ; then
    exit 1
fi

echo "* + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - *"
echo "*  This script expects that a 'make installkernel' has already"
echo "*  been done, but that the system is still running the previous"
echo "*  kernel.  Ie, that you have not rebooted."
echo "*"
echo "*  Also note that this only does a PARTIAL installworld.  You"
echo "*  will still have to do a full installworld after rebooting."
echo "* + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - *"
echo ""

#   See if the user wants us to create a mini-/bin inside of the
#   newly-installed kernel.  These executables would only be used
#   *after* booting into the new kernel, so we want the new-world
#   versions of all files.
#   XXX - This is a idea which could be useful in many situations, but
#	it really should be implemented as an official make-target.
#	It would be particularly nice to make this a statically-linked
#	(and crunchgen-ed) collection of programs...
if [ -z "${DOMINI}" -a -z "${DOMAKE}" ] ; then
    echo "Do you want a mini-/bin in that newly-installed /boot/kernel? "
    read -p "(y/n) ? "  DOMINI remline
    echo " "
elif [ -z "${DOMINI}" ] ; then
    DOMINI="${DOMAKE}"
fi
if [ -n "`echo /y/yes/okay/ok/ | grep -i \"/${DOMINI}/\"`" ] ; then
    KERNBINDIR=/boot/kernel/bin
    if [ -e ${KERNBINDIR} ] ; then
        rm -Rf ${KERNBINDIR}
    fi
    mkdir -p ${KERNBINDIR}
    #   Much of this is done in a subshell, so values of DESTDIR, etc,
    #   will only be in effect for this section of the script.
    (
    DESTDIR=${KERNBINDIR}
    BINDIR=""
    NOINFO=YES
    NOMAN=YES
    export BINDIR DESTDIR NOINFO NOMAN
    MFLAG=
    for wantdir in bin/chflags bin/chmod bin/cp bin/ls bin/mkdir bin/mv bin/sh \
                   sbin/ifconfig sbin/mount sbin/mount_nfs sbin/reboot \
                   usr.bin/find usr.bin/xargs ; do
	if [ -n "$VERBOSE" ] ; then
	    echo ".. Installing ${wantdir} to mini-/bin"
	fi
        (cd ${wantdir} && make ${MFLAG} install >/dev/null )
	if [ $? -ne 0 ] ; then
	    echo "** Error while in ${wantdir} doing 'make install'"
	    echo "**       for DESTDIR=${KERNBINDIR}" 
	    exit 1
	fi
    done
    echo "Done building ${KERNBINDIR}"
    echo
    ) || exit 1
fi

#   Start out with no PATH at all.
PATH=

#   Where all the binaries should be coming from.
OW_BIN="/bin"
OW_SBIN="/sbin"
OW_UBIN="/usr/bin"
OW_USBIN="/usr/sbin"
OW_GUBIN="/usr/bin"

MKTEMPCMD=/usr/bin/mktemp

#   I intentionally prefer to have a shorter name here...  We just need a
#   unique name, we're not likely to be under attack during installworld!
TMPHOLD=`"${MKTEMPCMD}" -q -d ${TMPDIR:-/tmp}/install-oldk.XXX`
if [ $? -ne 0 ] ; then
    echo "** Unable to create temp program-holding directory"
    exit 1
fi

#   Set the most-restrictive value for PATH that the user is willing to
#   shoot for.  The more restrictive we are here, the more likely we
#   will catch all references to "unexpected" executables.
PATH=${TMPHOLD}:/sbin:/bin:/usr/sbin:/usr/bin
if [ -n "$SETMINPATH" ] ; then
    PATH=${TMPHOLD}
fi

#   Find the most-appropriate version of key commands for this script.
#   XXX - It would be nice if we could reliably find the exact kernel that
#	we booted up with, and check for the optional mini-/bin in it.
COPYCMD=/missing/cp
for chkexec in "/rescue/cp" /bin/cp ; do
    if [ -f "${chkexec}" ] ; then
        COPYCMD="${chkexec} -p"
        break
    fi
done
LINKCMD=/missing/ln
for chkexec in "/rescue/ln" /bin/ln ; do
    if [ -f "${chkexec}" ] ; then
        LINKCMD="${chkexec}"
        break
    fi
done
COPYINFO="Copying"

copy_exec () {
    srcdir="$1"
    cmdname="$2"
    alsoln="$3"
    srcfile="${srcdir}/${cmdname}"
    resfile="/rescue/${cmdname}"

    if [ -f "${resfile}" -a -x "${resfile}" ] ; then
        if [ -n "$VERBOSE" ] ; then
	    echo ".. Linking ${TMPHOLD}/RESCUE to ${cmdname}"
	fi
	${LINKCMD} "${TMPHOLD}/RESCUE" "${TMPHOLD}/${cmdname}"
	if [ $? -ne 0 ] ; then
	    echo "** Error Linking '${cmdname}'"
	    exit 1
	fi
    elif [ -f "${srcfile}" -a -x "${srcfile}" ] ; then
        if [ -n "$VERBOSE" ] ; then
	    echo ".. ${COPYINFO} ${srcfile}"
	fi
	${COPYCMD} "${srcfile}" "${TMPHOLD}"
	if [ $? -ne 0 ] ; then
	    echo "** Error ${COPYINFO} '${srcfile}'"
	    exit 1
	fi
    else
        echo "** Cannot find ${cmdname} in /rescue or ${srcdir}?"
        exit 1
    fi

    if [ -n "${alsoln}" ] ; then
	if [ -n "$VERBOSE" ] ; then
	    echo ".. Linking '${cmdname}' as '${alsoln}' "
	fi
	${LINKCMD} "${TMPHOLD}/${cmdname}" "${TMPHOLD}/${alsoln}"
	if [ $? -ne 0 ] ; then
	    echo "** Error Linking '${cmdname}'"
	    exit 1
	fi
    fi
}

# The programs listed in the following `do' loop are all the same programs
# that the standard 'installworld' target wants to make copies of, except
# that this has special-cases for `awk', `[', and `egrep'.  This script
# also adds the commands `cp', `install', `id' and `which', because those
# are also *used* by the standard `make installworld' target, although
# that target doesn't bother to make copies of those programs.  The `sleep'
# command is also added, but only because it is used in this script.  And
# `script' is included just because it can be useful when testing this script.
#
# Note that this means there will be two copies made of these files
# (because the 'make installworld' target is still going to copy them a
# second time).

#   Do the `cp' command first, because this script does so much with it.
#   This is done as a special case, because it's the initial program
#   from /rescue (if /rescue exists).
chkfile="/rescue/cp"
if [ -f "${chkfile}" -a -x "${chkfile}" ] ; then
    if [ -n "$VERBOSE" ] ; then
        echo ".. Copying ${chkfile} to 'RESCUE'"
    fi
    ${COPYCMD} "${chkfile}" "${TMPHOLD}/RESCUE"
fi
copy_exec "${OW_BIN}" cp

#   Do the `ln' command as the second one, for similar reasons.
copy_exec "${OW_BIN}" ln

#   Awk is also called 'nawk'
copy_exec "${OW_UBIN}" nawk awk

#   The `install' comand is not a special case in this script,
#   but it is in the installworld_newk script.
copy_exec "${OW_UBIN}" install

#   Worried about the extra disk space that this script uses up in /tmp?  Well,
#   just specify the -S option, and this script will create symlinks instead of
#   copying the files.  Note that the original files might be NFS-mounted, and
#   /tmp might be a memory-based file system, so the `installworld' might go
#   much faster when copies are done here instead of symlinks.
if [ -n "$SYMLINKS" ] ; then
    echo "The -S (symlinks) option is ignored in installworld_oldk"
    # COPYINFO="Linking to"
    # COPYCMD="ln -s"
    # LINKCMD="ln -s"
fi

for prog in cap_mkdb cat chflags chmod chown date \
            echo       find grep    make mkdir mtree mv \
            pwd_mkdb rm sed sh sysctl test true uname wc zic \
            hostname id ls sleep script umount which xargs
do
    gotmatch=
    for chkdir in "${OW_BIN}" "${OW_SBIN}" "${OW_UBIN}" "${OW_USBIN}"
    do
        if [ -f "${chkdir}/${prog}" -a -x "${chkdir}/${prog}" ] ; then
            gotmatch=yes
            copy_exec "${chkdir}" "${prog}"
            if [ $? -ne 0 ] ; then
                exit 1
            fi
            break
        fi
    done
    if [ -z "$gotmatch" ] ; then
        echo "** Did not find '${prog}' ?"
    fi
done

#   Special case to handle '[', which we know is the same as 'test'
if [ -x ${TMPHOLD}/test ] ; then
    if [ -n "$VERBOSE" ] ; then
        echo ".. Linking 'test' as '[' "
    fi
    ${LINKCMD} ${TMPHOLD}/test ${TMPHOLD}/[
fi
#   Special case for 'egrep', which is the same as 'grep'
if [ -x ${TMPHOLD}/grep ] ; then
    if [ -n "$VERBOSE" ] ; then
        echo ".. Linking 'grep' as 'egrep' "
    fi
    ${LINKCMD} ${TMPHOLD}/grep ${TMPHOLD}/egrep
fi

#   Have to duplicate the standard makefile, to make a few changes.

#   First find the setting of PATH.  Insert a line in front of that
#   which uses the (undocumented) .SHELL feature to get 'make' to
#   use the newer version of /bin/sh that we just made a copy of.
#   Then alter the PATH setting so that all make targets check our
#   directory of copied files first.  If '-M' was given, then have
#   a PATH setting that looks ONLY at our copied files.
#    
#   XXX - the .SHELL feature did NOT seem to work the way that I
#	wanted it to, but that is not a problem for now.  It can
#	be looked into at some later date...
nawk '/^PATH=/ { \
	    print "#   Try to get the make cmd to use an alternate /bin/sh." ; \
	    print ".SHELL : name=sh path=" TDIR "/sh"  ; \
	    print "" ; \
	    if (WANTMIN == "yes") \
	        sub(/^PATH *=[ \t]*.*/, "PATH=\t" TDIR ); \
	    else \
	        sub(/^PATH *=[ \t]*/, "PATH=\t" TDIR ":"); \
	    } \
      /-f Makefile.inc1/ { \
	    sub(/Makefile.inc1/, TDIR "/Makefile.inc1" ); \
	    } \
      { print $0 }' \
    "TDIR=${TMPHOLD}" "WANTMIN=${SETMINPATH}" Makefile > ${TMPHOLD}/Makefile

#   In the case of this script, we want the new libraries to be the
#   *last* things that are installed (since we will be running some
#   programs which expect the present libraries).  However, we do
#   still have the problem that 'make' explicitly uses /bin/sh, so
#   the install of 'bin' must be delayed to after those libraries.
#   [Someone recently committed a total restructuring of Makefile.inc1,
#   so the following  has to be setup such that it works with either
#   formats.  That's why it seems to be doing everything twice.]
nawk 'BEGIN { GOTSBIN = 0; } \
      /^# Put initial settings/ { \
	    print "#   Try to get the make cmd to use an alternate /bin/sh." ; \
	    print ".SHELL : name=sh path=" TDIR "/sh"  ; \
	    print "" ; \
	    } \
      /^SUBDIR=[\t ]*share\/info .*bin/ { \
	    print "#   Try to get the make cmd to use an alternate /bin/sh." ; \
	    print ".SHELL : name=sh path=" TDIR "/sh"  ; \
	    print "" ; \
	    } \
      /exists\(.*\/sbin\)/ { \
	    if (GOTSBIN == 0) { \
		GOTSBIN = 1;
		print "" ; \
		print "#   For installworld_oldk processing, forget" ; \
		print "#   all the subdirectories before sbin..."; \
		print "SUBDIR=" ; \
	        } \
	    } \
      /^SUBDIR\+=sbin/ { \
	    if (GOTSBIN == 0) { \
		GOTSBIN = 1;
		print "" ; \
		print "#   For installworld_oldk processing, forget" ; \
		print "#   all the subdirectories before sbin..."; \
		print "SUBDIR=" ; \
	        } \
	    } \
      /^# These are last, since it is/ { \
	    print "#   These dirs are done last for installworld_oldk." ; \
	    print ".if exists(${.CURDIR}/lib)" ; \
	    print "SUBDIR+= lib" ; \
	    print ".endif" ; \
	    print ".if exists(${.CURDIR}/libexec)" ; \
	    print "SUBDIR+= libexec"; \
	    print ".endif"; \
	    print ".if exists(${.CURDIR}/bin)" ; \
	    print "SUBDIR+= bin"; \
	    print ".endif"; \
	    } \
      /-f Makefile.inc1/ { \
	    sub(/Makefile.inc1/, TDIR "/Makefile.inc1" ); \
	    } \
     { print $0 } \
     END    { \
	    if (GOTSBIN == 0) { \
	        print "ERROR: No \"sbin\" match in Makefile.inc1" > "/dev/stderr"; \
	        } \
	    }' \
    "TDIR=${TMPHOLD}" Makefile.inc1 > "${TMPHOLD}/Makefile.inc1"

echo ""
echo "The key programs needed by 'make installworld' have been copied."
if [ -n "$VERBOSE" ] ; then
    ls -C ${TMPHOLD}
    echo ""
fi

# XXX - Add some "do-nothing" settings so that we won't clobber any
#	more than we need to.  I wish we could avoid having to set
#	them as environment variables, particularly for the case
#	where the user chooses to type in all the commands.  The
#	more a user has to type, the more chances for a typo...
NO_FORTRAN=yes
NO_RESCUE=yes
NOGAMES=yes
NOINFO=yes
NOMAN=yes
NOSHARE=yes
export NO_FORTRAN NO_RESCUE NOGAMES NOINFO NOMAN NOSHARE

#   The sparc64_installcheck will want this in the environment.
NEWSPARC_TIMETYPE=__int64_t
export NEWSPARC_TIMETYPE

# See if the user wants us to go ahead with 'installworld',
#     or just tell them what steps they need to do.
if [ -z "${DOMAKE}" ] ; then
    echo "Do you want to proceed with the abridged 'installworld'? "
    read -p "(y/n) ? "  DOMAKE remline
    echo " "
fi
if [ -n "`echo /y/yes/okay/ok/ | grep -i \"/${DOMAKE}/\"`" ] ; then
    echo "Okay then, this script has set:"
    echo "    NO_FORTRAN NO_RESCUE NOGAMES NOINFO NOMAN NOSHARE"
    echo "and:"
    echo "    NEWSPARC_TIMETYPE=__int64_t"
    echo "    PATH=${PATH}"
    echo "and will now execute the command:"
    echo "    make -f ${TMPHOLD}/Makefile installworld"
    sleep 4
    make -f ${TMPHOLD}/Makefile installworld
else
    echo "When you are ready to continue, enter the commands:"
    echo "    NO_FORTRAN=yes"
    echo "    NO_RESCUE=yes"
    echo "    NOGAMES=yes"
    echo "    NOINFO=yes"
    echo "    NOMAN=yes"
    echo "    NOSHARE=yes"
    echo "    export NO_FORTRAN NO_RESCUE NOGAMES NOINFO NOMAN NOSHARE"
    echo "    NEWSPARC_TIMETYPE=__int64_t"
    echo "    export NEWSPARC_TIMETYPE"
    echo "and:"
    echo "    PATH=${PATH}"
    echo "or:"
    echo "    PATH=${TMPHOLD}:\${PATH}"
    echo "and:"
    echo "    make -f ${TMPHOLD}/Makefile installworld"
fi