aboutsummaryrefslogtreecommitdiff
path: root/sys/dev/ciss
Commit message (Expand)AuthorAgeFilesLines
* Satisfy the intent of kern/151564: [ciss] ciss(4) should increaseSean Bruno2013-01-153-18/+42
* Increase the driver-side limit on the number of logical volumes thatPeter Wemm2012-10-251-1/+1
* Convert a number of drivers to obtaining their parent DMA tag from theirScott Long2012-03-121-1/+1
* Update PCI IDs for ciss controllers that are supported by this driver.Sean Bruno2012-01-261-2/+9
* Add support for HP P420 to ciss(4)Sean Bruno2012-01-181-0/+1
* Add the CAM Target Layer (CTL).Kenneth D. Merry2012-01-121-1/+1
* Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs.Ed Schouten2011-11-071-1/+2
* Add descriptor sense support to CAM, and honor sense residuals properly inKenneth D. Merry2011-10-031-2/+6
* Cosmetic: make it less confusing when displaying RAID 1 level, that mightKonstantin Belousov2010-10-021-1/+1
* Initialize the callout structure earlier in attach before calling anyJohn Baldwin2010-04-281-1/+1
* Several changes to fix livelock under high load, introduced by r203489:Alexander Motin2010-03-032-4/+12
* When hacking INQUIRY result, make sure that it is right INQUIRY and thereAlexander Motin2010-02-051-2/+7
* Return CAM_RELEASE_SIMQ flag only when it is needed, when SIM reallyAlexander Motin2010-02-041-12/+10
* MFp4: Large set of CAM inprovements.Alexander Motin2010-01-281-42/+6
* Don't panic due to unlocking an unowned mutex if we fail during attach.Gavin Atkinson2009-12-171-2/+5
* Sync driver with Yahoo:Scott Long2009-09-163-74/+75
* Fix locking around copyout() operations.Scott Long2009-09-161-3/+9
* Make MSI and PERFORMANT interrupts work correctly. Only require the minimumScott Long2009-09-162-4/+13
* Increase CISS_MAX_PHYSTGT to 256 so that it matches what the controller mightScott Long2009-09-161-1/+1
* Fix an apparently harmless typo.Scott Long2009-07-201-1/+1
* Revert the CISS driver to 64K i/o, the previous change was in error andScott Long2009-07-131-1/+1
* Separate the parallel scsi knowledge out of the core of the XPT, andScott Long2009-07-102-0/+4
* We no longer need to use d_thread_t, migrate to struct thread *.Warner Losh2009-05-201-3/+3
* Updated PCI ID's from the vendorScott Long2009-05-191-1/+4
* Tell CAM that CISS logical devices support tagged queueing. This fixesScott Long2009-02-201-2/+5
* Work again to fix the interrupt masking problems. We now recognizeScott Long2008-08-292-37/+40
* Correctly set the interrupt enable and disable bits. The previousScott Long2008-08-022-15/+11
* A number of significant enhancements to the ciss driver:Scott Long2008-07-114-150/+494
* Add support for the P212, P410, P410i, P411, and P812 HP Smart ArrayPaul Saab2008-06-101-0/+5
* Remove a check that didn't allow > 12 byte CDB's to be issued toPaul Saab2008-05-161-6/+0
* Add `hw.ciss.nop_message_heartbeat' tunable (default disabled) forMitsuru IWASAKI2008-02-101-1/+4
* Don't repeat error logging about NOP message sending ifMitsuru IWASAKI2008-01-281-1/+5
* Fix NOP message sending in ciss_periodic() which causes panic withMitsuru IWASAKI2007-11-051-3/+16
* Rename the kthread_xxx (e.g. kthread_create()) callsJulian Elischer2007-10-201-3/+3
* Add NOP-message polling to ciss_periodic().Mitsuru IWASAKI2007-10-131-1/+80
* Fix a mistake made in the MPSAFE commit that caused CAM to serialize requestsScott Long2007-10-121-1/+2
* Prepare for future integration between CAM and newbus. xpt_bus_registerScott Long2007-06-171-2/+2
* Satisfy witness during shutdownScott Long2007-06-051-0/+2
* Eliminate M_TEMP.Scott Long2007-05-141-3/+3
* Streamline locking in ciss_free()Scott Long2007-05-021-26/+27
* MPSAFE ciss driverScott Long2007-05-012-20/+46
* Remove Giant from CAM. Drivers (SIMs) now register a mutex that CAM willScott Long2007-04-151-2/+2
* o break newbus api: add a new argument of type driver_filter_t toPaolo Pisati2007-02-231-1/+1
* o ciss.ko depends on cam and pci.Maxim Konovalov2006-11-301-0/+2
* 2nd and final commit that moves us to CAM_NEW_TRAN_CODEMatt Jacob2006-11-021-9/+0
* The first of 3 major steps to move the CAM layer forward to usingMatt Jacob2006-10-311-3/+21
* Spin until a request structure is available in the ioctl path.Paul Saab2006-05-301-2/+2
* Since DELAY() was moved, most <machine/clock.h> #includes have beenPoul-Henning Kamp2006-05-161-1/+0
* Free another memory leak when dealing with disk notification.Paul Saab2006-04-201-1/+4
* Free some previously leaked memory on module unload.Paul Saab2006-04-191-2/+9