aboutsummaryrefslogtreecommitdiff
path: root/sys/dev/ata/ata-all.h
Commit message (Expand)AuthorAgeFilesLines
* Implement automatic SCSI sense fetching for ata(4) in ATA_CAM mode.Alexander Motin2011-04-121-2/+3
* Make ATA_CAM wrapper to report SATA power management capabilities to CAM toAlexander Motin2010-11-181-0/+1
* Set of legacy mode SATA enchancements:Alexander Motin2010-10-181-8/+3
* Fix a problem where device detection would work unreliably on ServerworksNathan Whitehorn2010-09-091-0/+1
* SATA1.x SiliconImage controllers on power-on reset TFD Status register intoAlexander Motin2010-09-021-0/+1
* Add ata(4) ability to limit initial ATA mode for devices via device hints.Alexander Motin2010-07-031-0/+1
* Some revisions of the Serverworks K2 SATA controller have a dataNathan Whitehorn2010-06-061-0/+1
* Include opt_ata.h, as some structures here depending on ATA_CAM option.Alexander Motin2010-03-311-0/+2
* - Give ATA/SATA SIMs info about ATAPI packet size, supported by device.Alexander Motin2010-02-021-0/+1
* Unbreak the ata_atapi() usage. Since r200171 the mode setting functionsMarius Strobl2009-12-131-1/+1
* MFp4:Alexander Motin2009-12-061-2/+31
* Introduce define and kernel option ATA_REQUEST_TIMEOUT to control ATA(4)Alexander Motin2009-11-081-0/+4
* MFp4:Alexander Motin2009-10-311-5/+9
* Turn off use of ATA_A_4BIT on modern hardware. This flag was alreadyNathan Whitehorn2009-10-291-1/+10
* Move non-PCI prototypes from ata-pci.h -> ata-all.h.Rafal Jaworowski2009-06-241-0/+13
* MFp4.Alexander Motin2009-06-011-1/+16
* Improve kernel dumping reliability for busy ATA channels:Alexander Motin2009-05-011-0/+1
* Add experimental support for SATA interface power management.Alexander Motin2009-04-291-1/+5
* Revert my ata_identify()/ata_reinit() related changes: r189166, r189091Alexander Motin2009-02-281-8/+1
* Rework device probing by moving ata_getparam() call from ata_identify() toAlexander Motin2009-02-281-0/+8
* Remove direct ata_completed() call options from ata_finish(), except for theAlexander Motin2009-02-261-1/+0
* Improve ata_reinit():Alexander Motin2009-02-211-0/+1
* Fix typo: s/SLUMPER/SLUMBER/Alexander Motin2009-02-201-1/+1
* Use channel driver's attach/detach routines instead of ata_attach()/Alexander Motin2009-02-191-0/+1
* ata_interrupt() does not need to return anything. It is not it's businessAlexander Motin2009-02-171-1/+1
* This is the roumored ATA modulerisation works, and it needs a little explanat...Søren Schmidt2008-10-091-0/+1
* Introduce a new loader tunable "hw.ata.ata_dma_check_80pin", defaulting to 1.Philip Paeps2008-08-151-1/+2
* Go back to preallocating everything possible on init.Søren Schmidt2008-04-171-18/+27
* Fix problem with slave devices.Søren Schmidt2008-04-141-1/+1
* Fix identify of slave devices.Søren Schmidt2008-04-131-1/+1
* Fix the brokenness in the former commit, sorry for the mess.Søren Schmidt2008-04-111-6/+3
* Add experimental support for SATA Port MultipliersSøren Schmidt2008-04-101-25/+42
* Add a "spindown" facility to ata-disks: If no requests have been receivedPoul-Henning Kamp2008-03-171-0/+3
* Follow the current fashion of gratuitously stomping into otherPoul-Henning Kamp2008-01-021-36/+14
* Implement a workaround of the datacorruption problem on serverworks HT1000 ch...Søren Schmidt2007-12-131-0/+2
* Add generic support for chipsets that say they support AHCI. This should cat...Søren Schmidt2007-11-181-1/+1
* Add Viking Interworks 256MB as an ata device; this might giveRemko Lodder2007-06-261-0/+1
* Hopefully unbreak the 64bit DMA support this time.Søren Schmidt2007-04-081-1/+1
* Add support for 64bit addressing to AHCI and Marvell controllers.Søren Schmidt2007-04-061-0/+1
* Cleanup the channel/phy reset code.Søren Schmidt2007-03-081-0/+1
* Update copyright headers.Søren Schmidt2007-02-211-1/+1
* Support AHCI chips where the ports are not consecutively numbered as inSøren Schmidt2007-02-151-0/+23
* Update AHCI support to be more generic.Søren Schmidt2006-06-281-0/+2
* Make the ATAPI sense data accessible when using the ioctl interfaceSøren Schmidt2006-03-311-44/+5
* ATA_USB will need to hook into the delayed boot identify to haveSøren Schmidt2006-03-081-0/+1
* Work around the deadlock that occours when ATA waits for the taskqueueSøren Schmidt2006-03-011-2/+6
* Keep the parent device (in this case the channel) around in ata_request,Søren Schmidt2006-02-231-0/+1
* Unbreak Promise SATAII/150 controllers caused by the DMA dump changes.Søren Schmidt2006-02-091-1/+0
* Whitespace cleanup.Søren Schmidt2006-01-181-3/+3
* Add support for using DMA on dump, greatly speeds up the dump process.Søren Schmidt2006-01-181-0/+5
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-19 11:33:57 +0000