aboutsummaryrefslogtreecommitdiff
path: root/sys/arm/conf/CAMBRIA
Commit message (Expand)AuthorAgeFilesLines
* Clean up the ARM kernel configs to use 'include<space><tab>"file"'.Andrew Turner2015-05-071-3/+3
* Create std.arm and std.armv6 config files and include the right one fromIan Lepore2015-05-051-0/+1
* Remove "New" label from NFSCL/NFSD now that they are the only NFSJohn Baldwin2015-01-061-1/+1
* In kernel config files, it is supposed to be 'options<space><tab>' notWarner Losh2014-03-181-1/+1
* Make all the comments '# ' and align to same column. This fixes theWarner Losh2014-03-161-43/+43
* Strip arm/conf/DEFAULTS down to just items that are mandatory for runningIan Lepore2014-03-071-0/+3
* Remove the ARM_USE_SMALL_ALLOC option and code related to it.Ian Lepore2014-02-081-1/+0
* Revert r260440. I didn't realize that most of this change was alreadyIan Lepore2014-02-071-1/+0
* Add option USB_HOST_ALIGN to configs that contain 'device usb'. SettingIan Lepore2014-01-081-0/+1
* Back out r253779 & r253786.David E. O'Brien2013-07-311-1/+0
* Decouple yarrow from random(4) device.David E. O'Brien2013-07-291-0/+1
* Remove all legacy ATA code parts, not used since options ATA_CAM enabled inAlexander Motin2013-04-041-1/+0
* Correctly use spaces here.Adrian Chadd2012-11-181-2/+2
* Just compile the whole ath chipset support in.Adrian Chadd2012-11-171-15/+4
* Grammar fix: s/NIC's/NICs/Glen Barber2012-08-261-1/+1
* Strip trailing whitespace.Warner Losh2012-06-131-2/+2
* Remove pty(4) from our kernel configurations.Ed Schouten2012-03-211-1/+0
* Change all the sample kernel configurations to useRick Macklem2011-08-071-2/+2
* Comment out AH_DEBUG, to get this kernel to compile, until AH_DEBUG is fixed.Olivier Houchard2011-06-241-1/+1
* Fix build of this kernel config. The ath(4) bits need the 11n frame formatJohn Baldwin2011-04-291-1/+1
* Switch the GENERIC kernels for all architectures to the new CAM-based ATAAlexander Motin2011-04-241-2/+3
* Break out the ath PCI logic into a separate device/module.Adrian Chadd2011-03-311-1/+2
* Add a GPIO driver for the Gateworks Cambria platform.Andrew Thompson2010-11-111-0/+4
* Adjust style (following the already existing rules) for the newlyAttilio Rao2010-02-151-1/+1
* Add the options DEADLKRES (introducing the deadlock resolver thread) inAttilio Rao2010-02-101-0/+1
* Intel XScale hwpmc(4) support.Rui Paulo2009-12-231-0/+4
* Remove unknown ath hal device entries.Andrew Thompson2009-12-021-3/+0
* revert r196600; didn't notice it'd been done alreadySam Leffler2009-08-271-1/+0
* enable mesh by defaultSam Leffler2009-08-271-0/+1
* Add IEEE80211_SUPPORT_MESH, following similar change to nanobsd andRui Paulo2009-07-171-0/+1
* - Use "device\t" and "options \t" for consistency.Jun Kuriyama2009-05-101-13/+13
* Remove ATH_SUPPORT_TDMA and use IEEE80211_SUPPORT_TDMA instead. ItSam Leffler2009-03-301-1/+0
* switch to !legacy usb stackSam Leffler2009-03-111-6/+5
* configure flash supportSam Leffler2009-03-101-0/+2
* add cfid and geom_redbootSam Leffler2009-03-091-1/+5
* enable tdma support by default; many people using these boardsSam Leffler2009-03-061-0/+2
* legacy USB is required on these platforms at the momentSam Leffler2009-03-061-12/+13
* Change over the usb kernel options to the new stack (retaining existingAndrew Thompson2009-02-231-1/+0
* use mii instead of miibus so we don't drag in all phy supportSam Leffler2009-02-181-1/+1
* arm is in DEFAULTS; remove dupSam Leffler2008-12-271-1/+0
* Merge support for Gateworks Cambria boards:Sam Leffler2008-12-201-2/+2
* seems I never committed theseSam Leffler2008-12-171-0/+149
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-23 13:30:38 +0000