diff options
Diffstat (limited to 'usr.sbin/xntpd/scripts/support/etc/rc')
| -rwxr-xr-x | usr.sbin/xntpd/scripts/support/etc/rc | 198 |
1 files changed, 0 insertions, 198 deletions
diff --git a/usr.sbin/xntpd/scripts/support/etc/rc b/usr.sbin/xntpd/scripts/support/etc/rc deleted file mode 100755 index ef8834a69f7b..000000000000 --- a/usr.sbin/xntpd/scripts/support/etc/rc +++ /dev/null @@ -1,198 +0,0 @@ -#!/bin/sh -# NTP time synchronisation -# -# /src/NTP/REPOSITORY/v3/supportscripts/etc/rc,v 1.11 1993/07/09 13:17:00 kardel Exp -# -# rc,v -# Revision 1.11 1993/07/09 13:17:00 kardel -# local NTPROOT -# -# Revision 1.10 1993/07/09 11:37:29 kardel -# Initial restructured version + GPS support -# -# Revision 1.9 1993/06/23 14:10:36 kardel -# June 21st reconcilation -# -# Revision 1.7 1993/06/02 12:04:43 kardel -# May 28th reconcilation & clenaup -# -# -# non reference clock hosts will try to do an ntpdate on NTPSERVERS -# -NTPSERVERS="ntps1-0 ntps1-1 ntps2-0 ntps2-1" -NTPROOT=/local/NTP - -# -# get the initial setup -# -if [ ! -r $NTPROOT/etc/setup ]; then - echo "ERROR: $NTPROOT/etc/setup missing - incorrect installation." - exit 1 -else - . $NTPROOT/etc/setup -fi - -umask 022 # SITE SPECIFIC: local policy - watch out for NFS and "root" rights - -msg="" -# -# default configuration files are named $NTPROOT/conf/<ARCH>.<KARCH> -# -CF=$NTPROOT/conf/$ARCH.$KARCH # default configuration file -# -# Host specific config file (reference clocks) have the hostname tagged on -# -CFH="$CF"."$HOSTNAME" # specific configuration file -# -# where to find the tickadj command -# -KFIX=$NTPROOT/bin/tickadj # kernel variable fix -# -# where to find special tickadj parameters -# -TC=$NTPROOT/conf/tickconf # special tickadj parameters -# -# where to find the keys file (if not found $KEY.dumb will be used) -# -KEY=$NTPROOT/conf/ntp.keys # private key file -# -# the daemon -# -XD=$NTPROOT/bin/xntpd # NTP daemon -# -# HP adjtimed -# -ADJTIMED=$NTPROOT/bin/adjtimed # HP special (adjtime() emulation) -# -# ntpdate command -# -NTPDATE=$NTPROOT/bin/ntpdate - -# -# secondary timed support -# The word "TIMED" must be in the config file for timed to start -# Note that this times is a special version which does not ever set or -# adjust the time. Ask time@informatik.uni-erlangen.de for patches -# -TIMED=$NTPROOT/bin/timed # timed (Berkeley) secondary time service - # here used in a *HARMLESS* version - # to provide time to "inferior" systems -# -# ISREFHOST is a command that returns exit status 0 for a reference host -# Site specific: sample for dcf77 is given -# -ISREFHOST="[ -f $NTPROOT/.karch.$KARCH/sys/OBJ/parsestreams.o -a -f /dev/refclock-0 ]" -# -# SETUP_REFCLOCK -# -# what to do in order to set up a local reference clock -# usually this will load a STREAMS module or initialize other things -# needed -# -SETUP_REFCLOCK() { - if modstat | grep -s 'PARSE'; then - ECHO "loadable PARSER STREAMS module already loaded." - else - ECHO "attempting to load PARSER STREAMS module..." - MDLFILE="/tmp/mdl.$$" - if modload $NTPROOT/.karch.$KARCH/sys/OBJ/parsestreams.o -o $MDLFILE 2>&1; then - modstat - else - echo WARNING: load FAILED - fi | LOG - rm -f $MDLFILE - unset MDLFILE - fi -} - -kargs() { - MATCH=NO - HOSTID="`(hostid) 2>/dev/null || echo 000000`" - if [ -r "$TC" ]; then - exec 0< "$TC" - while [ "$MATCH" != "YES" ] && read HOST ID PARAM; do - if [ "$HOST" = "DEFAULT" ]; then - DEFAULT="$ID $PARAM" - else - if [ "$ID" = "$HOSTID" -o "$HOST" = "$HOSTNAME" ]; then - echo "$PARAM" - MATCH=YES - fi - fi - done - if [ "$MATCH" != "YES" ]; then - if [ -z "$DEFAULT" ]; then - echo "-A -p -s -q"; - else - echo "$DEFAULT"; - fi - fi - else - echo "-A -p -s -q"; - fi -} - -if [ -x $XD ]; then - if [ -x "$ADJTIMED" ]; then - $ADJTIMED && ECHO "adjusttimesupport: adjtimed." - fi - # - # WARNING: check ps command first, or you might kill things you don't want to - # - PID="`(ps -efa 2>/dev/null || ps auxww 2>/dev/null || echo "") | grep xntp | grep -v grep | awk '{ print $2 }'`" - - if [ ! -z "$PID" ]; then - ECHO "killing old NTP daemon (PID=$PID)" - # - # enable this after checking for correctness - # kill $PID - ECHO "should do a kill $PID, if this is the right PID - check rc script" - fi - # - # try an ntpdate when timeservers are configured - # - if [ ! -z "$NTPSERVERS" -a -x $NTPDATE ]; then - ECHO "NTP initial time setting" - $NTPDATE -v $NTPSERVERS | LOG - fi - # - # look for reference clock equipment - # - if $ISREFHOST; then - ECHO "REFERENCE CLOCK SUPPORT (initializing...)" - SETUP_REFCLOCK - fi - - if [ -r "$CFH" ]; then - CF="$CFH" - else - if [ ! -r "$KEY" ]; then - KEY="$KEY.dumb" - fi - fi - - ECHO "NTP configuration file: $CF" - ECHO -n "time daemon startup:" - - if [ -r "$CF" ]; then - if [ -x "$KFIX" ]; then - KARGS="`kargs`" - if [ ! -z "$KARGS" ]; then - $KFIX $KARGS && ECHO -n "tickadj $KARGS" - fi - fi - $XD -c "$CF" -k "$KEY" && ECHO -n ' xntpd' - if [ -x "$TIMED" ] && grep -s TIMED "$CF"; then - $TIMED -M -N && ECHO -n ' timed' - fi - else - msg="configuration file ($CF) not present." - fi -else - msg="daemon binary ($XD) not present." -fi -ECHO "." - -if [ "$msg" ]; then - NLECHO "WARNING: NO NTP time sychronisation: $msg" -fi |