diff options
Diffstat (limited to 'usr.sbin/i4b/man/isic.4')
| -rw-r--r-- | usr.sbin/i4b/man/isic.4 | 359 |
1 files changed, 0 insertions, 359 deletions
diff --git a/usr.sbin/i4b/man/isic.4 b/usr.sbin/i4b/man/isic.4 deleted file mode 100644 index e545c08f4c77..000000000000 --- a/usr.sbin/i4b/man/isic.4 +++ /dev/null @@ -1,359 +0,0 @@ -.\" -.\" Copyright (c) 1997, 2002 Hellmuth Michaelis. All rights reserved. -.\" -.\" Redistribution and use in source and binary forms, with or without -.\" modification, are permitted provided that the following conditions -.\" are met: -.\" 1. Redistributions of source code must retain the above copyright -.\" notice, this list of conditions and the following disclaimer. -.\" 2. Redistributions in binary form must reproduce the above copyright -.\" notice, this list of conditions and the following disclaimer in the -.\" documentation and/or other materials provided with the distribution. -.\" -.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND -.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE -.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -.\" SUCH DAMAGE. -.\" -.\" $FreeBSD$ -.\" -.\" last edit-date: [Sun Jul 28 20:14:24 2002] -.\" -.Dd July 28, 2002 -.Dt ISIC 4 -.Os -.Sh NAME -.Nm isic -.Nd isdn4bsd Siemens ISDN Chipset device driver -.Sh SYNOPSIS -.Cd "device isic" -.Sh DESCRIPTION -The -.Nm -driver provides D-channel layer 1 supports as specified in ITU Recommendation -I.430 and layer 1 support for the B-channel. -.Pp -The driver supports several 8 and 16bit passive ISA, ISA PnP and PCI -ISDN cards from various manufacturers which are all based upon the -popular Siemens ISDN chipset consisting of the ISDN Subscriber Access -Controller ISAC (such as the PEB2085 or PSB 2186) and the High-Level -Serial Communications Controller Extended HSCX (such as the SAB82525 -or PSB21525). -The newer IPAC chip (which integrates an ISAC and a HSCX in one chip, -with the added benefit of larger FIFO buffers) is also supported. -.Sh SUPPORTED CARDS: ISA bus, NON-PnP -.Bl -tag -width Ds -compact -.It Ar Teles S0/8, Dr. Neuhaus Niccy 1008, Creatix ISDN-S0/8 -.Pp -The required entry in the kernel config file is: -.Bd -literal -offset indent -options TEL_S0_8 -.Ed -.Pp -The required entry in -.Xr device.hints 5 -file is: -.Pp -.Bd -literal -offset indent -hint.isic.0.at="isa" -hint.isic.0.maddr="0xd0000" -hint.isic.0.irq="5" -hint.isic.0.flags="1" -.Ed -.Pp -Notice that this cards must not have a -.Em port -value. -.Pp -Valid values for hint.isic.N.irq are 2, 3, 4, 5, 6 and 7. -.Pp -The i/o ports are memory mapped and the memory start address (hint.isic.N.maddr) -may be in the range 0xA0000 to 0xDF000 and use a region of 4kB of memory. -.Pp -.It Ar Teles S0/16, Creatix ISDN-S0, Dr. Neuhaus Niccy 1016 -.Pp -The required entry in the kernel config file is: -.Bd -literal -offset indent -options TEL_S0_16 -.Ed -.Pp -The required entry in -.Xr device.hints 5 -file is: -.Pp -.Bd -literal -offset indent -hint.isic.0.at="isa" -hint.isic.0.port="0xd80" -hint.isic.0.maddr="0xd0000" -hint.isic.0.irq="5" -hint.isic.0.flags="2" -.Ed -.Pp -These boards have a jumper which specifies an i/o base address -(hint.isic.N.port) of either 0xd80, 0xe80 or 0xf80. -The remaining necessary configuration values are then -programmed at run time by accessing this i/o port. -.Pp -Valid interrupts (hint.isic.N.irq) are 2, 3, 4, 5, 10, 11, 12 or 15. -.Pp -Valid memory start addresses (hint.isic.N.maddr) are -0xC0000, 0xC2000, 0xC4000, 0xC6000, 0xC8000, 0xCA000, 0xCC000, 0xCE000, -0xD0000, 0xD2000, 0xD4000, 0xD6000, 0xD8000, 0xDA000, 0xDC000 and -0xDE000. -.Pp -Notice: Although the jumpers are labeled 0xd80, 0xe80 or 0xf80, they -also require i/o space at addresses 0x180, 0x280 or 0x380. -.Pp -.It Ar Teles S0/16.3 -.Pp -The required entry in the kernel config file is: -.Bd -literal -offset indent -options TEL_S0_16_3 -.Ed -.Pp -The required entry in -.Xr device.hints 5 -file is: -.Pp -.Bd -literal -offset indent -hint.isic.0.at="isa" -hint.isic.0.port="0xd80" -hint.isic.0.irq="5" -hint.isic.0.flags="3" -.Ed -.Pp -This card is completely i/o mapped and must not have an -.Em maddr -statement in the hints file. -.Pp -Valid interrupts (hint.isic.N.irq) are 2, 5, 9, 10, 12 or 15. -.Pp -These boards have a jumper which specifies an i/o base address -(hint.isic.N.port) of either 0xd80, 0xe80 or 0xf80. -.Pp -Notice: Although the switch positions are labeled 0x180, 0x280 and 0x380, -the card is to be configured at 0xd80, 0xe80 or 0xf80 respectively! -.Pp -.It Ar AVM A1 and AVM Fritz!Card -.Pp -The required entry in the kernel config file is: -.Bd -literal -offset indent -options AVM_A1 -.Ed -.Pp -The required entry in -.Xr device.hints 5 -file is: -.Pp -.Bd -literal -offset indent -hint.isic.0.at="isa" -hint.isic.0.port="0x340" -hint.isic.0.irq="5" -hint.isic.0.flags="4" -.Ed -.Pp -These boards have a jumper which specifies an i/o base address (hint.isic.N.port) -of either 0x200, 0x240, 0x300 or 0x340. -.Pp -Valid interrupt (hint.isic.N.irq) values are 3, 4, 5, 6, 7, 10, 11, 12 or 15. -.Pp -Older Versions of the AVM A1 also require setting of an IRQ jumper, newer -versions of this and the Fritz!Card only have an i/o base jumper and the -interrupt is setup at runtime by reprogramming a register. -.Pp -.It Ar USRobotics Sportster ISDN TA intern and Stollmann Tina pp -.Pp -The required entry in the kernel config file is: -.Bd -literal -offset indent -options USR_STI -.Ed -.Pp -The required entry in -.Xr device.hints 5 -file is: -.Pp -.Bd -literal -offset indent -hint.isic.0.at="isa" -hint.isic.0.port="0x268" -hint.isic.0.irq="5" -hint.isic.0.flags="7" -.Ed -.Pp -Valid i/o port values (hint.isic.N.port) are 0x200, 0x208, 0x210, 0x218, -0x220, 0x228, 0x230, 0x238, 0x240, 0x248, 0x250, 0x258, 0x260, 0x268, -0x270 and 0x278. -.Pp -Valid interrupt (hint.isic.N.irq) values are 5, 7, 10, 11, 12, 14, 15. -.Pp -Notice: this card has a strange address decoding scheme resulting in -occupying 64 windows of some bytes length over the whole i/o address -range. -.Pp -.It Ar ITK ix1 Micro ( < V.3, non-PnP version ) -.Pp -The required entry in the kernel config file is: -.Bd -literal -offset indent -options ITKIX1 -.Ed -.Pp -The required entry in -.Xr device.hints 5 -file is: -.Pp -.Bd -literal -offset indent -hint.isic.0.at="isa" -hint.isic.0.port="0x398" -hint.isic.0.irq="10" -hint.isic.0.flags="18" -.Ed -.Pp -Valid i/o port values must be in the range (<unknown>). -.Pp -Valid interrupt configurations are (<unknown>). -.Pp -.It Ar ELSA MicroLink ISDN/PCC-16 and ELSA PCFpro -.Pp -The required entry in the kernel config file is: -.Bd -literal -offset indent -options ELSA_PCC16 -.Ed -.Pp -The required entry in -.Xr device.hints 5 -file is: -.Pp -.Bd -literal -offset indent -hint.isic.0.at="isa" -hint.isic.0.port="0x360" -hint.isic.0.irq="10" -hint.isic.0.flags="20" -.Ed -.Pp -Valid i/o port (hint.isic.N.port) values are 0x160, 0x170, 0x260 and 0x360. -.Pp -Valid interrupt (hint.isic.N.irq) values are 2, 3, 5, 10, 11 and 15. -.Pp -The LED's are not supported and are off. -.Pp -.El -.Sh SUPPORTED CARDS: ISA bus, PnP (Plug 'n Pray) -.Bl -tag -width Ds -compact -.It Ar Teles S0/16.3 PnP -.Pp -The required entry in the kernel config file is: -.Bd -literal -offset indent -options TEL_S0_16_3_P -.Ed -.Pp -.It Ar Creatix ISDN-S0 P&P -.Pp -The required entry in the kernel config file is: -.Bd -literal -offset indent -options CRTX_S0_P -.Ed -.Pp -.It Ar "Dr. Neuhaus Niccy Go@" -.Pp -The required entry in the kernel config file is: -.Bd -literal -offset indent -options DRN_NGO -.Ed -.Pp -.It Ar "Sedlbauer Win Speed" -.Pp -The required entry in the kernel config file is: -.Bd -literal -offset indent -options SEDLBAUER -.Ed -.Pp -.It Ar "Dynalink IS64PH" -.Pp -The required entry in the kernel config file is: -.Bd -literal -offset indent -options DYNALINK -.Ed -.Pp -.It Ar "ELSA QuickStep 1000pro ISA" -.Pp -The required entry in the kernel config file is: -.Bd -literal -offset indent -options ELSA_QS1ISA -.Ed -.Pp -The LED's are not supported and are off. -.Pp -.It Ar "Siemens I-Surf 2.0" -.Pp -The required entry in the kernel config file is: -.Bd -literal -offset indent -options SIEMENS_ISURF2 -.Ed -.Pp -.It Ar "Asuscom ISDNlink 128K ISA" -.Pp -The required entry in the kernel config file is: -.Bd -literal -offset indent -options ASUSCOM_IPAC -.Ed -.Pp -.It Ar "Eicon Diehl DIVA 2.0 and 2.02" -.Pp -The required entry in the kernel config file is: -.Bd -literal -offset indent -options EICON_DIVA -.Ed -.Pp -.It Ar "Compaq Microcom 610 ISDN card (Compaq series PSB2222I)" -.Pp -The required entry in the kernel config file is: -.Bd -literal -offset indent -options COMPAQ_M610 -.Ed -.Pp -.El -.Sh SUPPORTED CARDS: PCI bus -.Bl -tag -width Ds -compact -.It Ar "ELSA QuickStep 1000pro-PCI" -.Pp -The required entry in the kernel config file is: -.Bd -literal -offset indent -options ELSA_QS1PCI -.Ed -.Pp -The LED's are not supported and are off. -.Pp -.El -.Sh CAVEATS -Note that all of ISA boards with i/o ports actually use several ranges -of port addresses; Teles happen to refer to the 0xd80 range in their -documentation (the board also uses 0x180 etc.), while AVM happen to refer -to the 0x200 range in their documentation (the board also uses 0x600 etc.) -The driver matches the manufacturers' description for the purposes of -configuration, but of course makes use of all the ports in order to -operate the card. -.Sh SEE ALSO -.Xr i4bq921 4 , -.Xr i4bq931 4 -.Sh STANDARDS -CCITT Recommendation I.430 -.Sh AUTHORS -.An -nosplit -The -.Nm -driver and this manpage were written by -.An Hellmuth Michaelis Aq hm@FreeBSD.org . -It is based on earlier work of -.An Arne Helme , -.An Andrew Gordon -and -.An Gary Jennejohn Aq gj@FreeBSD.org . -.Sh BUGS -Since there is no hardware documentation available from the manufacturers -of several boards, it is likely that there are many bugs left. |