aboutsummaryrefslogtreecommitdiff
path: root/sys/i386/isa/sound/configure.c
diff options
context:
space:
mode:
Diffstat (limited to 'sys/i386/isa/sound/configure.c')
-rw-r--r--sys/i386/isa/sound/configure.c830
1 files changed, 0 insertions, 830 deletions
diff --git a/sys/i386/isa/sound/configure.c b/sys/i386/isa/sound/configure.c
deleted file mode 100644
index 5b7217bccb46..000000000000
--- a/sys/i386/isa/sound/configure.c
+++ /dev/null
@@ -1,830 +0,0 @@
-/*
- * sound/configure.c - Configuration program for the Linux Sound Driver
- *
- * Copyright by Hannu Savolainen 1993
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met: 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer. 2.
- * Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- */
-
-#include <stdio.h>
-
-#define B(x) (1 << (x))
-
-/*
- * Option numbers
- */
-
-#define OPT_PAS 0
-#define OPT_SB 1
-#define OPT_ADLIB 2
-#define OPT_LAST_MUTUAL 2
-
-#define OPT_GUS 3
-#define OPT_MPU401 4
-#define OPT_UART6850 5
-#define OPT_PSS 6
-#define OPT_GUS16 7
-#define OPT_GUSMAX 8
-#define OPT_MSS 9
-
-#define OPT_HIGHLEVEL 10 /* This must be same than the next one */
-#define OPT_SBPRO 10
-#define OPT_SB16 11
-#define OPT_AUDIO 12
-#define OPT_MIDI_AUTO 13
-#define OPT_MIDI 14
-#define OPT_YM3812_AUTO 15
-#define OPT_YM3812 16
-#define OPT_SEQUENCER 17
-#define OPT_LAST 17 /* Must be the same than the defined OPT */
-
-#define ANY_DEVS (B(OPT_AUDIO)|B(OPT_MIDI)|B(OPT_SEQUENCER)|B(OPT_GUS)| \
- B(OPT_MPU401)|B(OPT_PSS)|B(OPT_GUS16)|B(OPT_GUSMAX)|B(OPT_MSS))
-/*
- * Options that have been disabled for some reason (incompletely implemented
- * and/or tested). Don't remove from this list before looking at file
- * experimental.txt for further info.
- */
-#define DISABLED_OPTIONS (B(OPT_PSS))
-
-typedef struct
- {
- unsigned long conditions;
- unsigned long exclusive_options;
- char macro[20];
- int verify;
- int alias;
- int default_answ;
- }
-
-hw_entry;
-
-
-/*
- * The rule table for the driver options. The first field defines a set of
- * options which must be selected before this entry can be selected. The
- * second field is a set of options which are not allowed with this one. If
- * the fourth field is zero, the option is selected without asking
- * confirmation from the user.
- *
- * With this version of the rule table it is possible to select just one type of
- * hardware.
- *
- * NOTE! Keep the following table and the questions array in sync with the
- * option numbering!
- */
-
-hw_entry hw_table[] =
-{
-/*
- * 0
- */
- {0, 0, "PAS", 1, 0, 0},
- {0, 0, "SB", 1, 0, 0},
- {0, B (OPT_PAS) | B (OPT_SB), "ADLIB", 1, 0, 0},
-
- {0, 0, "GUS", 1, 0, 0},
- {0, 0, "MPU401", 1, 0, 0},
- {0, 0, "UART6850", 1, 0, 0},
- {0, 0, "PSS", 1, 0, 0},
- {B (OPT_GUS), 0, "GUS16", 1, 0, 0},
- {B (OPT_GUS), B (OPT_GUS16), "GUSMAX", 1, 0, 0},
- {0, 0, "MSS", 1, 0, 0},
-
- {B (OPT_SB), B (OPT_PAS), "SBPRO", 1, 0, 1},
- {B (OPT_SB) | B (OPT_SBPRO), B (OPT_PAS), "SB16", 1, 0, 1},
-{B (OPT_PSS) | B (OPT_SB) | B (OPT_PAS) | B (OPT_GUS), 0, "AUDIO", 1, 0, 1},
- {B (OPT_MPU401), 0, "MIDI_AUTO", 0, OPT_MIDI, 0},
- {B (OPT_PSS) | B (OPT_SB) | B (OPT_PAS) | B (OPT_MPU401) | B (OPT_GUS), 0, "MIDI", 1, 0, 1},
- {B (OPT_ADLIB), 0, "YM3812_AUTO", 0, OPT_YM3812, 0},
- {B (OPT_PSS) | B (OPT_SB) | B (OPT_PAS) | B (OPT_ADLIB), B (OPT_YM3812_AUTO), "YM3812", 1, 0, 1},
- {B (OPT_MIDI) | B (OPT_YM3812) | B (OPT_YM3812_AUTO) | B (OPT_GUS), 0, "SEQUENCER", 0, 0, 1}
-};
-
-char *questions[] =
-{
- "ProAudioSpectrum 16 support",
- "SoundBlaster support",
- "AdLib support",
- "Gravis Ultrasound support",
- "MPU-401 support (NOT for SB16)",
- "6850 UART Midi support",
- "PSS (ECHO-ADI2111) support",
- "16 bit sampling option of GUS (_NOT_ GUS MAX)",
- "GUS MAX support",
- "Microsoft Sound System support",
-
- "SoundBlaster Pro support",
- "SoundBlaster 16 support",
- "digitized voice support",
- "This should not be asked",
- "MIDI interface support",
- "This should not be asked",
- "FM synthesizer (YM3812/OPL-3) support",
- "/dev/sequencer support",
- "Should I die"
-};
-
-unsigned long selected_options = 0;
-int sb_dma = 0;
-
-int
-can_select_option (int nr)
-{
- switch (nr)
- {
- case 0:
- fprintf (stderr, "The SoundBlaster, AdLib and ProAudioSpectrum\n"
- "CARDS cannot be installed at the same time.\n\n"
- "However the PAS16 has a SB emulator so you could select"
- "the SoundBlaster DRIVER with it.\n");
- fprintf (stderr, " - ProAudioSpectrum 16\n");
- fprintf (stderr, " - SoundBlaster / SB Pro\n");
- fprintf (stderr, " (Could be selected with a PAS16 also)\n");
- fprintf (stderr, " - AdLib\n");
- fprintf (stderr, "\nDon't enable SoundBlaster if you have GUS at 0x220!\n\n");
- break;
-
- case OPT_LAST_MUTUAL + 1:
- fprintf (stderr, "\nThe following cards should work with any other cards.\n"
- "CAUTION! Don't enable MPU-401 if you don't have it.\n");
- break;
-
- case OPT_HIGHLEVEL:
- fprintf (stderr, "\nSelect one or more of the following options\n");
- break;
-
-
- }
-
- if (hw_table[nr].conditions)
- if (!(hw_table[nr].conditions & selected_options))
- return 0;
-
- if (hw_table[nr].exclusive_options)
- if (hw_table[nr].exclusive_options & selected_options)
- return 0;
-
- if (DISABLED_OPTIONS & B (nr))
- return 0;
-
- return 1;
-}
-
-int
-think_positively (int def_answ)
-{
- char answ[512];
- int len;
-
- if ((len = read (0, &answ, sizeof (answ))) < 1)
- {
- fprintf (stderr, "\n\nERROR! Cannot read stdin\n");
-
- perror ("stdin");
- printf ("#undef CONFIGURE_SOUNDCARD\n");
- printf ("#undef KERNEL_SOUNDCARD\n");
- exit (-1);
- }
-
- if (len < 2) /*
- * There is an additional LF at the end
- */
- return def_answ;
-
- answ[len - 1] = 0;
-
- if (!strcmp (answ, "y") || !strcmp (answ, "Y"))
- return 1;
-
- return 0;
-}
-
-int
-ask_value (char *format, int default_answer)
-{
- char answ[512];
- int len, num;
-
-play_it_again_Sam:
-
- if ((len = read (0, &answ, sizeof (answ))) < 1)
- {
- fprintf (stderr, "\n\nERROR! Cannot read stdin\n");
-
- perror ("stdin");
- printf ("#undef CONFIGURE_SOUNDCARD\n");
- printf ("#undef KERNEL_SOUNDCARD\n");
- exit (-1);
- }
-
- if (len < 2) /*
- * There is an additional LF at the end
- */
- return default_answer;
-
- answ[len - 1] = 0;
-
- if (sscanf (answ, format, &num) != 1)
- {
- fprintf (stderr, "Illegal format. Try again: ");
- goto play_it_again_Sam;
- }
-
- return num;
-}
-
-int
-main (int argc, char *argv[])
-{
- int i, num, def_size, full_driver = 1;
- char answ[10];
-
- printf ("/*\tGenerated by configure. Don't edit!!!!\t*/\n\n");
-
- fprintf (stderr, "\nConfiguring the sound support\n\n");
-
- fprintf (stderr, "Do you want to include full version of the sound driver (n/y) ? ");
-
- if (think_positively (0))
- {
- /*
- * Select all but some most dangerous cards. These cards are difficult to
- * detect reliably or conflict with some other cards (SCSI, Mitsumi)
- */
- selected_options = 0xffffffff &
- ~(B (OPT_MPU401) | B (OPT_UART6850) | B (OPT_PSS)) &
- ~DISABLED_OPTIONS;
-
- fprintf (stderr, "Note! MPU-401, PSS and 6850 UART drivers not enabled\n");
- full_driver = 1;
- }
- else
- {
- fprintf (stderr, "Do you want to DISABLE the Sound Driver (n/y) ?");
- if (think_positively (0))
- {
- printf ("#undef CONFIGURE_SOUNDCARD\n");
- printf ("#undef KERNEL_SOUNDCARD\n");
- exit (0);
- }
- /*
- * Partial driver
- */
-
- full_driver = 0;
-
- for (i = 0; i <= OPT_LAST; i++)
- if (can_select_option (i))
- {
- if (!(selected_options & B (i))) /*
- * Not selected yet
- */
- if (!hw_table[i].verify)
- {
- if (hw_table[i].alias)
- selected_options |= B (hw_table[i].alias);
- else
- selected_options |= B (i);
- }
- else
- {
- int def_answ = hw_table[i].default_answ;
-
- fprintf (stderr,
- def_answ ? " %s (y/n) ? " : " %s (n/y) ? ",
- questions[i]);
- if (think_positively (def_answ))
- if (hw_table[i].alias)
- selected_options |= B (hw_table[i].alias);
- else
- selected_options |= B (i);
- }
- }
- }
-
- if (selected_options & B (OPT_SBPRO))
- {
- fprintf(stderr, "Do you want support for the mixer of SG NX Pro ? ");
- if (think_positively (0))
- printf("#define __SGNXPRO__\n");
- }
-
- if (selected_options & B (OPT_SB16))
- selected_options |= B (OPT_SBPRO);
-
- if (selected_options & B (OPT_PSS))
- {
- genld_again:
- fprintf
- (stderr,
- "if you wish to emulate the soundblaster and you have a DSPxxx.LD.\n"
- "then you must include the LD in the kernel.\n"
- "(do you wish to include a LD) ? ");
- if (think_positively (0))
- {
- char path[512];
-
- fprintf (stderr,
- "Enter the path to your LD file (pwd is sound): ");
- scanf ("%s", path);
- fprintf (stderr, "including LD file %s\n", path);
- selected_options |= B (OPT_SB) | B (OPT_MPU401) | B (OPT_ADLIB);
-
- /* Gen LD header */
- {
- int fd;
- int count;
- char c;
- int i = 0;
-
- if ((fd = open (path, 0)) > 0)
- {
- FILE *sf = fopen ("synth-ld.h", "w");
-
- fprintf (sf, "/* automaticaly generated by configure */\n");
- fprintf (sf, "unsigned char pss_synth[] = {\n");
- while (1)
- {
- count = read (fd, &c, 1);
- if (count == 0)
- break;
- if (i != 0 && (i % 10) == 0)
- fprintf (sf, "\n");
- fprintf (sf, "0x%02x,", c & 0xFFL);
- i++;
- }
- fprintf (sf, "};\n"
- "#define pss_synthLen %d\n", i);
- fclose (sf);
- close (fd);
- }
- else
- {
- fprintf (stderr, "couldn't open %s as the ld file\n",
- path);
- fprintf (stderr, "try again with correct path? ");
- if (think_positively (1))
- goto genld_again;
- }
- }
- }
- else
- {
- FILE *sf = fopen ("synth-ld.h", "w");
-
- fprintf (sf, "/* automaticaly generated by configure */\n");
- fprintf (sf, "unsigned char pss_synth[1];\n"
- "#define pss_synthLen 0\n");
- fclose (sf);
- }
- }
-
- if (!(selected_options & ANY_DEVS))
- {
- printf ("#undef CONFIGURE_SOUNDCARD\n");
- printf ("#undef KERNEL_SOUNDCARD\n");
- fprintf (stderr, "\n*** This combination is useless. Sound driver disabled!!! ***\n\n");
- exit (0);
- }
- else
- printf ("#define KERNEL_SOUNDCARD\n");
-
- for (i = 0; i <= OPT_LAST; i++)
- if (!hw_table[i].alias)
- if (selected_options & B (i))
- printf ("#undef EXCLUDE_%s\n", hw_table[i].macro);
- else
- printf ("#define EXCLUDE_%s\n", hw_table[i].macro);
-
-
- /*
- * IRQ and DMA settings
- */
- printf ("\n");
-
-#if defined(linux)
- if ((selected_options & B (OPT_SB)) && selected_options & (B (OPT_AUDIO) | B (OPT_MIDI)))
- {
- fprintf (stderr, "\nI/O base for SB?\n"
- "The factory default is 220\n"
- "Enter the SB I/O base: ");
-
- num = ask_value ("%x", 0x220);
- fprintf (stderr, "SB I/O base set to %03x\n", num);
- printf ("#define SBC_BASE 0x%03x\n", num);
-
- fprintf (stderr, "\nIRQ number for SoundBlaster?\n"
- "The IRQ address is defined by the jumpers on your card.\n"
- "The factory default is either 5 or 7 (depending on the model).\n"
- "Valid values are 9(=2), 5, 7 and 10.\n"
- "Enter the value: ");
-
- num = ask_value ("%d", 7);
- if (num != 9 && num != 5 && num != 7 && num != 10)
- {
-
- fprintf (stderr, "*** Illegal input! ***\n");
- num = 7;
- }
- fprintf (stderr, "SoundBlaster IRQ set to %d\n", num);
-
- printf ("#define SBC_IRQ %d\n", num);
-
- if (selected_options & (B (OPT_SBPRO) | B (OPT_PAS) | B (OPT_PSS)))
- {
- fprintf (stderr, "\nDMA channel for SoundBlaster?\n"
- "For SB 1.0, 1.5 and 2.0 this MUST be 1\n"
- "SB Pro supports DMA channels 0, 1 and 3 (jumper)\n"
- "For SB16 give the 8 bit DMA# here\n"
- "The default value is 1\n"
- "Enter the value: ");
-
- num = ask_value ("%d", 1);
- if (num < 0 || num > 3)
- {
-
- fprintf (stderr, "*** Illegal input! ***\n");
- num = 1;
- }
- fprintf (stderr, "SoundBlaster DMA set to %d\n", num);
- printf ("#define SBC_DMA %d\n", num);
- sb_dma = num;
- }
-
- if (selected_options & B (OPT_SB16))
- {
-
- fprintf (stderr, "\n16 bit DMA channel for SoundBlaster 16?\n"
- "Possible values are 5, 6 or 7\n"
- "The default value is 6\n"
- "Enter the value: ");
-
- num = ask_value ("%d", 6);
- if ((num < 5 || num > 7) && (num != sb_dma))
- {
-
- fprintf (stderr, "*** Illegal input! ***\n");
- num = 6;
- }
- fprintf (stderr, "SoundBlaster DMA set to %d\n", num);
- printf ("#define SB16_DMA %d\n", num);
-
- fprintf (stderr, "\nI/O base for SB16 Midi?\n"
- "Possible values are 300 and 330\n"
- "The factory default is 330\n"
- "Enter the SB16 Midi I/O base: ");
-
- num = ask_value ("%x", 0x330);
- fprintf (stderr, "SB16 Midi I/O base set to %03x\n", num);
- printf ("#define SB16MIDI_BASE 0x%03x\n", num);
- }
- }
-
- if (selected_options & B (OPT_PAS))
- {
- if (selected_options & (B (OPT_AUDIO) | B (OPT_MIDI)))
- {
- fprintf (stderr, "\nIRQ number for ProAudioSpectrum?\n"
- "The recommended value is the IRQ used under DOS.\n"
- "Please refer to the ProAudioSpectrum User's Guide.\n"
- "The default value is 10.\n"
- "Enter the value: ");
-
- num = ask_value ("%d", 10);
- if (num == 6 || num < 3 || num > 15 || num == 2) /*
- * Illegal
- */
- {
-
- fprintf (stderr, "*** Illegal input! ***\n");
- num = 10;
- }
- fprintf (stderr, "ProAudioSpectrum IRQ set to %d\n", num);
- printf ("#define PAS_IRQ %d\n", num);
- }
-
- if (selected_options & B (OPT_AUDIO))
- {
- fprintf (stderr, "\nDMA number for ProAudioSpectrum?\n"
- "The recommended value is the DMA channel under DOS.\n"
- "Please refer to the ProAudioSpectrum User's Guide.\n"
- "The default value is 3\n"
- "Enter the value: ");
-
- num = ask_value ("%d", 3);
- if (num == 4 || num < 0 || num > 7)
- {
-
- fprintf (stderr, "*** Illegal input! ***\n");
- num = 3;
- }
- fprintf (stderr, "\nProAudioSpectrum DMA set to %d\n", num);
- printf ("#define PAS_DMA %d\n", num);
- }
- }
-
- if (selected_options & B (OPT_GUS))
- {
- fprintf (stderr, "\nI/O base for Gravis Ultrasound?\n"
- "Valid choices are 210, 220, 230, 240, 250 or 260\n"
- "The factory default is 220\n"
- "Enter the GUS I/O base: ");
-
- num = ask_value ("%x", 0x220);
- if ((num > 0x260) || ((num & 0xf0f) != 0x200) || ((num & 0x0f0) > 0x060))
- {
-
- fprintf (stderr, "*** Illegal input! ***\n");
- num = 0x220;
- }
-
- if ((selected_options & B (OPT_SB)) && (num == 0x220))
- {
- fprintf (stderr, "FATAL ERROR!!!!!!!!!!!!!!\n"
- "\t0x220 cannot be used if SoundBlaster is enabled.\n"
- "\tRun the config again.\n");
- printf ("#undef CONFIGURE_SOUNDCARD\n");
- printf ("#undef KERNEL_SOUNDCARD\n");
- exit (-1);
- }
- fprintf (stderr, "GUS I/O base set to %03x\n", num);
- printf ("#define GUS_BASE 0x%03x\n", num);
-
- fprintf (stderr, "\nIRQ number for Gravis UltraSound?\n"
- "The recommended value is the IRQ used under DOS.\n"
- "Please refer to the Gravis Ultrasound User's Guide.\n"
- "The default value is 15.\n"
- "Enter the value: ");
-
- num = ask_value ("%d", 15);
- if (num == 6 || num < 3 || num > 15 || num == 2) /*
- * Invalid
- */
- {
-
- fprintf (stderr, "*** Illegal input! ***\n");
- num = 15;
- }
- fprintf (stderr, "Gravis UltraSound IRQ set to %d\n", num);
- printf ("#define GUS_IRQ %d\n", num);
-
- fprintf (stderr, "\nDMA number for Gravis UltraSound?\n"
- "The recommended value is the DMA channel under DOS.\n"
- "Please refer to the Gravis Ultrasound User's Guide.\n"
- "The default value is 6\n"
- "Enter the value: ");
-
- num = ask_value ("%d", 6);
- if (num == 4 || num < 0 || num > 7)
- {
- fprintf (stderr, "*** Illegal input! ***\n");
- num = 6;
- }
- fprintf (stderr, "\nGravis UltraSound DMA set to %d\n", num);
- printf ("#define GUS_DMA %d\n", num);
- }
-
- if (selected_options & B (OPT_MPU401))
- {
- fprintf (stderr, "\nI/O base for MPU-401?\n"
- "The factory default is 330\n"
- "Enter the MPU-401 I/O base: ");
-
- num = ask_value ("%x", 0x330);
- fprintf (stderr, "MPU-401 I/O base set to %03x\n", num);
- printf ("#define MPU_BASE 0x%03x\n", num);
-
- fprintf (stderr, "\nIRQ number for MPU-401?\n"
- "Valid numbers are: 3, 4, 5, 7 and 9(=2).\n"
- "The default value is 9.\n"
- "Enter the value: ");
-
- num = ask_value ("%d", 9);
- if (num == 6 || num < 3 || num > 15) /*
- * Used for floppy
- */
- {
-
- fprintf (stderr, "*** Illegal input! ***\n");
- num = 5;
- }
- fprintf (stderr, "MPU-401 IRQ set to %d\n", num);
- printf ("#define MPU_IRQ %d\n", num);
- }
-
- if (selected_options & B (OPT_UART6850))
- {
- fprintf (stderr, "\nI/O base for 6850 UART Midi?\n"
- "Be carefull. No defaults.\n"
- "Enter the 6850 UART I/O base: ");
-
- num = ask_value ("%x", 0);
- if (num == 0)
- {
- /*
- * Invalid value entered
- */
- printf ("#define EXCLUDE_UART6850\n");
- }
- else
- {
- fprintf (stderr, "6850 UART I/O base set to %03x\n", num);
- printf ("#define U6850_BASE 0x%03x\n", num);
-
- fprintf (stderr, "\nIRQ number for 6850 UART?\n"
- "Valid numbers are: 3, 4, 5, 7 and 9(=2).\n"
- "The default value is 5.\n"
- "Enter the value: ");
-
- num = ask_value ("%d", 5);
- if (num == 6 || num < 3 || num > 15) /*
- * Used for floppy
- */
- {
-
- fprintf (stderr, "*** Illegal input! ***\n");
- num = 5;
- }
- fprintf (stderr, "6850 UART IRQ set to %d\n", num);
- printf ("#define U6850_IRQ %d\n", num);
- }
- }
-
- if (selected_options & B (OPT_PSS))
- {
- fprintf (stderr, "\nI/O base for PSS?\n"
- "The factory default is 220\n"
- "Enter the PSS I/O base: ");
-
- num = ask_value ("%x", 0x220);
- fprintf (stderr, "PSS I/O base set to %03x\n", num);
- printf ("#define PSS_BASE 0x%03x\n", num);
-
- fprintf (stderr, "\nIRQ number for PSS?\n"
- "Valid numbers are: 3, 4, 5, 7, 9(=2) or 10.\n"
- "The default value is 10.\n"
- "Enter the value: ");
-
- num = ask_value ("%d", 10);
- if (num == 6 || num < 3 || num > 15) /* Used for floppy */
- {
- fprintf (stderr, "*** Illegal input! ***\n");
- num = 7;
- }
- fprintf (stderr, "PSS IRQ set to %d\n", num);
- printf ("#define PSS_IRQ %d\n", num);
-
- fprintf (stderr, "\nDMA number for ECHO-PSS?\n"
- "The default value is 3\n"
- "Enter the value: ");
-
- num = ask_value ("%d", 3);
- if (num == 4 || num < 0 || num > 7)
- {
- fprintf (stderr, "*** Illegal input! ***\n");
- num = 3;
- }
- fprintf (stderr, "\nECHO-PSS DMA set to %d\n", num);
- printf ("#define PSS_DMA %d\n", num);
- }
-
- if (selected_options & B (OPT_MSS))
- {
- fprintf (stderr, "\nI/O base for MSS (MS Sound System)?\n"
- "The factory default is 530\n"
- "Other possible values are 604, E80 or F40\n"
- "Enter the MSS I/O base: ");
-
- num = ask_value ("%x", 0x530);
- fprintf (stderr, "MSS I/O base set to %03x\n", num);
- printf ("#define MSS_BASE 0x%03x\n", num);
-
- fprintf (stderr, "\nIRQ number for MSS?\n"
- "Valid numbers are: 7, 9(=2), 10 and 11.\n"
- "The default value is 10.\n"
- "Enter the value: ");
-
- num = ask_value ("%d", 10);
- if (num == 6 || num < 3 || num > 15) /* Used for floppy */
- {
- fprintf (stderr, "*** Illegal input! ***\n");
- num = 7;
- }
- fprintf (stderr, "MSS IRQ set to %d\n", num);
- printf ("#define MSS_IRQ %d\n", num);
-
- fprintf (stderr, "\nDMA number for MSS?\n"
- "Valid values are 1 and 3 (sometimes 0)"
- "The default value is 3\n"
- "Enter the value: ");
-
- num = ask_value ("%d", 3);
- if (num == 4 || num < 0 || num > 7)
- {
- fprintf (stderr, "*** Illegal input! ***\n");
- num = 3;
- }
- fprintf (stderr, "\nMSS DMA set to %d\n", num);
- printf ("#define MSS_DMA %d\n", num);
- }
-
- if (selected_options & B (OPT_GUS16))
- {
- fprintf (stderr, "\nI/O base for GUS16 (GUS 16 bit sampling option)?\n"
- "The factory default is 530\n"
- "Other possible values are 604, E80 or F40\n"
- "Enter the GUS16 I/O base: ");
-
- num = ask_value ("%x", 0x530);
- fprintf (stderr, "GUS16 I/O base set to %03x\n", num);
- printf ("#define GUS16_BASE 0x%03x\n", num);
-
- fprintf (stderr, "\nIRQ number for GUS16?\n"
- "Valid numbers are: 3, 4, 5, 7, or 9(=2).\n"
- "The default value is 7.\n"
- "Enter the value: ");
-
- num = ask_value ("%d", 7);
- if (num == 6 || num < 3 || num > 15) /* Used for floppy */
- {
- fprintf (stderr, "*** Illegal input! ***\n");
- num = 7;
- }
- fprintf (stderr, "GUS16 IRQ set to %d\n", num);
- printf ("#define GUS16_IRQ %d\n", num);
-
- fprintf (stderr, "\nDMA number for GUS16?\n"
- "The default value is 3\n"
- "Enter the value: ");
-
- num = ask_value ("%d", 3);
- if (num < 0 || num > 3)
- {
- fprintf (stderr, "*** Illegal input! ***\n");
- num = 3;
- }
- fprintf (stderr, "\nGUS16 DMA set to %d\n", num);
- printf ("#define GUS16_DMA %d\n", num);
- }
-#endif
-
- if (selected_options & B (OPT_AUDIO))
- {
- def_size = 16384;
-
- if (selected_options & (B (OPT_SBPRO) | B (OPT_PAS) | B (OPT_SB16)))
- def_size = 32768;
-
-#ifndef __386BSD__
- if ((selected_options & (B (OPT_PAS) | B (OPT_PAS) | B (OPT_GUS16) | B (OPT_GUSMAX) |
- B (OPT_MSS) | B (OPT_PSS))) &&
- !full_driver)
- def_size = 65536; /*
- * PAS16 or SB16
- */
-#endif
-
- fprintf (stderr, "\nSelect the DMA buffer size (4096, 16384, 32768 or 65536 bytes)\n"
- "%d is recommended value for this configuration.\n"
- "Enter the value: ", def_size);
-
- num = ask_value ("%d", def_size);
- if (num != 4096 && num != 16384 && num != 32768 && num != 65536)
- {
-
- fprintf (stderr, "*** Illegal input! ***\n");
- num = def_size;
- }
- fprintf (stderr, "The DMA buffer size set to %d\n", num);
- printf ("#define DSP_BUFFSIZE %d\n", num);
- }
-
- printf ("#define SELECTED_SOUND_OPTIONS\t0x%08x\n", selected_options);
- fprintf (stderr, "The sound driver is now configured.\n");
-
-#if defined(SCO) || defined(ISC) || defined(SYSV)
- fprintf (stderr, "Remember to update the System file\n");
-#endif
-
- exit (0);
-}
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-21 18:29:17 +0000