diff options
Diffstat (limited to 'sys/gnu/dts/arm/sam9260ek_common.dtsi')
-rw-r--r-- | sys/gnu/dts/arm/sam9260ek_common.dtsi | 217 |
1 files changed, 0 insertions, 217 deletions
diff --git a/sys/gnu/dts/arm/sam9260ek_common.dtsi b/sys/gnu/dts/arm/sam9260ek_common.dtsi deleted file mode 100644 index 10541219117c..000000000000 --- a/sys/gnu/dts/arm/sam9260ek_common.dtsi +++ /dev/null @@ -1,217 +0,0 @@ -/* - * at91sam9260ek_common.dtsi - Device Tree file for Atmel sam9260ek board - * Copyright (C) 2014 M. Warner losh <imp@freebsd.org> - * - * Derived from: - * at91sam9g20ek_common.dtsi - Device Tree file for Atmel at91sam9g20ek board - * - * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Licensed under GPLv2. - * - * $FreeBSD$ - */ -#include "at91sam9260.dtsi" - -/ { - - chosen { - bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; - }; - - memory { - reg = <0x20000000 0x4000000>; - }; - - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <18432000>; - }; - }; - - ahb { - apb { - pinctrl@fffff400 { - board { - pinctrl_pck0_as_mck: pck0_as_mck { - atmel,pins = - <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC1 periph B */ - }; - - }; - - mmc0_slot1 { - pinctrl_board_mmc0_slot1: mmc0_slot1-board { - atmel,pins = - <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC9 gpio CD pin pull up and deglitch */ - }; - }; - }; - - dbgu: serial@fffff200 { - status = "okay"; - }; - - usart0: serial@fffb0000 { - pinctrl-0 = - <&pinctrl_usart0 - &pinctrl_usart0_rts - &pinctrl_usart0_cts - &pinctrl_usart0_dtr_dsr - &pinctrl_usart0_dcd - &pinctrl_usart0_ri>; - status = "okay"; - }; - - usart1: serial@fffb4000 { - status = "okay"; - }; - - macb0: ethernet@fffc4000 { - phy-mode = "rmii"; - status = "okay"; - }; - - usb1: gadget@fffa4000 { - atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; - - mmc0: mmc@fffa8000 { - pinctrl-0 = < - &pinctrl_board_mmc0_slot1 - &pinctrl_mmc0_clk - &pinctrl_mmc0_slot1_cmd_dat0 - &pinctrl_mmc0_slot1_dat1_3>; - status = "okay"; - slot@1 { - reg = <1>; - bus-width = <4>; - cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>; - }; - }; - - ssc0: ssc@fffbc000 { - status = "okay"; - pinctrl-0 = <&pinctrl_ssc0_tx>; - }; - - spi0: spi@fffc8000 { - cs-gpios = <0>, <&pioC 11 0>, <0>, <0>; - mtd_dataflash@0 { - compatible = "atmel,at45", "atmel,dataflash"; - spi-max-frequency = <50000000>; - reg = <1>; - }; - }; - - watchdog@fffffd40 { - status = "okay"; - }; - }; - - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; - status = "okay"; - - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x20000>; - }; - - barebox@20000 { - label = "barebox"; - reg = <0x20000 0x40000>; - }; - - bareboxenv@60000 { - label = "bareboxenv"; - reg = <0x60000 0x20000>; - }; - - bareboxenv2@80000 { - label = "bareboxenv2"; - reg = <0x80000 0x20000>; - }; - - oftree@80000 { - label = "oftree"; - reg = <0xa0000 0x20000>; - }; - - kernel@a0000 { - label = "kernel"; - reg = <0xc0000 0x400000>; - }; - - rootfs@4a0000 { - label = "rootfs"; - reg = <0x4c0000 0x7800000>; - }; - - data@7ca0000 { - label = "data"; - reg = <0x7cc0000 0x8340000>; - }; - }; - - usb0: ohci@00500000 { - num-ports = <2>; - status = "okay"; - }; - }; - - i2c@0 { - status = "okay"; - - 24c512@50 { - compatible = "24c512"; - reg = <0x50>; - }; - - wm8731: wm8731@1b { - compatible = "wm8731"; - reg = <0x1b>; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - - btn3 { - label = "Button 3"; - gpios = <&pioA 30 GPIO_ACTIVE_LOW>; - linux,code = <0x103>; - gpio-key,wakeup; - }; - - btn4 { - label = "Button 4"; - gpios = <&pioA 31 GPIO_ACTIVE_LOW>; - linux,code = <0x104>; - gpio-key,wakeup; - }; - }; - - sound { - compatible = "atmel,at91sam9g20ek-wm8731-audio"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pck0_as_mck>; - - atmel,model = "wm8731 @ AT91SAMG20EK"; - - atmel,audio-routing = - "Ext Spk", "LHPOUT", - "Int Mic", "MICIN"; - - atmel,ssc-controller = <&ssc0>; - atmel,audio-codec = <&wm8731>; - }; -}; |