diff options
Diffstat (limited to 'sys/gnu/dts/arm/omap3-n900.dts')
| -rw-r--r-- | sys/gnu/dts/arm/omap3-n900.dts | 63 |
1 files changed, 44 insertions, 19 deletions
diff --git a/sys/gnu/dts/arm/omap3-n900.dts b/sys/gnu/dts/arm/omap3-n900.dts index 74d8f7eb5563..2b74a81d1de2 100644 --- a/sys/gnu/dts/arm/omap3-n900.dts +++ b/sys/gnu/dts/arm/omap3-n900.dts @@ -65,50 +65,51 @@ camera_lens_cover { label = "Camera Lens Cover"; gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */ - linux,input-type = <5>; /* EV_SW */ - linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */ - wakeup-source; + linux,input-type = <EV_SW>; + linux,code = <SW_CAMERA_LENS_COVER>; + linux,can-disable; }; camera_focus { label = "Camera Focus"; gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */ - linux,code = <0x210>; /* KEY_CAMERA_FOCUS */ - wakeup-source; + linux,code = <KEY_CAMERA_FOCUS>; + linux,can-disable; }; camera_capture { label = "Camera Capture"; gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */ - linux,code = <0xd4>; /* KEY_CAMERA */ - wakeup-source; + linux,code = <KEY_CAMERA>; + linux,can-disable; }; lock_button { label = "Lock Button"; gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */ - linux,code = <0x98>; /* KEY_SCREENLOCK */ - wakeup-source; + linux,code = <KEY_SCREENLOCK>; + linux,can-disable; }; keypad_slide { label = "Keypad Slide"; gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */ - linux,input-type = <5>; /* EV_SW */ - linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */ - wakeup-source; + linux,input-type = <EV_SW>; + linux,code = <SW_KEYPAD_SLIDE>; + linux,can-disable; }; proximity_sensor { label = "Proximity Sensor"; gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */ - linux,input-type = <5>; /* EV_SW */ - linux,code = <0x0b>; /* SW_FRONT_PROXIMITY */ + linux,input-type = <EV_SW>; + linux,code = <SW_FRONT_PROXIMITY>; + linux,can-disable; }; }; - isp1704: isp1704 { - compatible = "nxp,isp1704"; + isp1707: isp1707 { + compatible = "nxp,isp1707"; nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>; usb-phy = <&usb2_phy>; }; @@ -287,7 +288,7 @@ pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */ OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */ - OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */ + OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */ OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */ OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */ OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */ @@ -299,7 +300,7 @@ modem_pins: pinmux_modem { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE4) /* gpio 70 => cmt_apeslpx */ - OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio 72 => ape_rst_rq */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4) /* gpio 72 => ape_rst_rq */ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4) /* gpio 73 => cmt_rst_rq */ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4) /* gpio 74 => cmt_en */ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE4) /* gpio 75 => cmt_rst */ @@ -328,6 +329,7 @@ regulator-name = "V28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ regulator-always-on; /* due to battery cover sensor */ }; @@ -335,30 +337,35 @@ regulator-name = "VCSI"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ }; &vaux3 { regulator-name = "VMMC2_30"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3000000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ }; &vaux4 { regulator-name = "VCAM_ANA_28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ }; &vmmc1 { regulator-name = "VMMC1"; regulator-min-microvolt = <1850000>; regulator-max-microvolt = <3150000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ }; &vmmc2 { regulator-name = "V28_A"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3000000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ regulator-always-on; /* due VIO leak to AIC34 VDDs */ }; @@ -366,6 +373,7 @@ regulator-name = "VPLL"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ regulator-always-on; }; @@ -373,6 +381,7 @@ regulator-name = "VSDI_CSI"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ regulator-always-on; }; @@ -380,6 +389,7 @@ regulator-name = "VMMC2_IO_18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ }; &vio { @@ -522,6 +532,21 @@ amstaos,cover-comp-gain = <16>; }; + adp1653: led-controller@30 { + compatible = "adi,adp1653"; + reg = <0x30>; + enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */ + + flash { + flash-timeout-us = <500000>; + flash-max-microamp = <320000>; + led-max-microamp = <50000>; + }; + indicator { + led-max-microamp = <17500>; + }; + }; + lp5523: lp5523@32 { compatible = "national,lp5523"; reg = <0x32>; @@ -618,7 +643,7 @@ ti,termination-current = <100>; ti,resistor-sense = <68>; - ti,usb-charger-detection = <&isp1704>; + ti,usb-charger-detection = <&isp1707>; }; }; |