diff options
Diffstat (limited to 'sys/gnu/dts/arm/motorola-mapphone-common.dtsi')
-rw-r--r-- | sys/gnu/dts/arm/motorola-mapphone-common.dtsi | 34 |
1 files changed, 31 insertions, 3 deletions
diff --git a/sys/gnu/dts/arm/motorola-mapphone-common.dtsi b/sys/gnu/dts/arm/motorola-mapphone-common.dtsi index da6b107da84a..9067e0ef4240 100644 --- a/sys/gnu/dts/arm/motorola-mapphone-common.dtsi +++ b/sys/gnu/dts/arm/motorola-mapphone-common.dtsi @@ -182,6 +182,14 @@ pwm-names = "enable", "direction"; direction-duty-cycle-ns = <10000000>; }; + + backlight: backlight { + compatible = "led-backlight"; + + leds = <&backlight_led>; + brightness-levels = <31 63 95 127 159 191 223 255>; + default-brightness-level = <6>; + }; }; &dss { @@ -205,6 +213,8 @@ vddi-supply = <&lcd_regulator>; reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */ + backlight = <&backlight>; + width-mm = <50>; height-mm = <89>; @@ -249,6 +259,13 @@ }; }; +/* Battery NVRAM on 1-wire handled by w1_ds250x driver */ +&hdqw1w { + pinctrl-0 = <&hdq_pins>; + pinctrl-names = "default"; + ti,mode = "1w"; +}; + &i2c1 { tmp105@48 { compatible = "ti,tmp105"; @@ -386,12 +403,11 @@ ramp-up-us = <1024>; ramp-down-us = <8193>; - led@0 { + backlight_led: led@0 { reg = <0>; led-sources = <2>; ti,led-mode = <0>; label = ":backlight"; - linux,default-trigger = "backlight"; }; led@1 { @@ -413,7 +429,7 @@ reset-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; /* gpio173 */ /* gpio_183 with sys_nirq2 pad as wakeup */ - interrupts-extended = <&gpio6 23 IRQ_TYPE_EDGE_FALLING>, + interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>, <&omap4_pmx_core 0x160>; interrupt-names = "irq", "wakeup"; wakeup-source; @@ -440,6 +456,13 @@ >; }; + hdq_pins: pinmux_hdq_pins { + pinctrl-single,pins = < + /* 0x4a100120 hdq_sio.hdq_sio aa27 */ + OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0) + >; + }; + /* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */ dss_hdmi_pins: pinmux_dss_hdmi_pins { pinctrl-single,pins = < @@ -650,6 +673,11 @@ }; }; +/* RNG is used by secure mode and not accessible */ +&rng_target { + status = "disabled"; +}; + /* Configure pwm clock source for timers 8 & 9 */ &timer8 { assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>; |