diff options
Diffstat (limited to 'sys/gnu/dts/arm/kirkwood-openrd.dtsi')
-rw-r--r-- | sys/gnu/dts/arm/kirkwood-openrd.dtsi | 55 |
1 files changed, 43 insertions, 12 deletions
diff --git a/sys/gnu/dts/arm/kirkwood-openrd.dtsi b/sys/gnu/dts/arm/kirkwood-openrd.dtsi index d3330dadf7ed..e4ecab112601 100644 --- a/sys/gnu/dts/arm/kirkwood-openrd.dtsi +++ b/sys/gnu/dts/arm/kirkwood-openrd.dtsi @@ -25,22 +25,12 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { pinctrl-0 = <&pmx_select28 &pmx_sdio_cd &pmx_select34>; pinctrl-names = "default"; - pmx_select28: pmx-select-uart-sd { + pmx_select28: pmx-select-rs232-rs485 { marvell,pins = "mpp28"; marvell,function = "gpio"; }; @@ -48,7 +38,7 @@ marvell,pins = "mpp29"; marvell,function = "gpio"; }; - pmx_select34: pmx-select-rs232-rs484 { + pmx_select34: pmx-select-uart-sd { marvell,pins = "mpp34"; marvell,function = "gpio"; }; @@ -65,6 +55,43 @@ status = "okay"; cd-gpios = <&gpio0 29 9>; }; + gpio@10100 { + p28 { + gpio-hog; + gpios = <28 GPIO_ACTIVE_HIGH>; + /* + * SelRS232or485 selects between RS-232 or RS-485 + * mode for the second UART. + * + * Low: RS-232 + * High: RS-485 + * + * To use the second UART, you need to change also + * the SelUARTorSD. + */ + output-low; + line-name = "SelRS232or485"; + }; + }; + gpio@10140 { + p2 { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + /* + * SelUARTorSD selects between the second UART + * (serial@12100) and SD (mvsdio@90000). + * + * Low: UART + * High: SD + * + * When changing this line make sure the newly + * selected device node is enabled and the + * previously selected device node is disabled. + */ + output-high; /* Select SD by default */ + line-name = "SelUARTorSD"; + }; + }; }; }; @@ -88,3 +115,7 @@ reg = <0x0600000 0x1FA00000>; }; }; + +&pcie0 { + status = "okay"; +}; |