diff options
Diffstat (limited to 'sys/dev/usb/if_axereg.h')
-rw-r--r-- | sys/dev/usb/if_axereg.h | 178 |
1 files changed, 178 insertions, 0 deletions
diff --git a/sys/dev/usb/if_axereg.h b/sys/dev/usb/if_axereg.h new file mode 100644 index 000000000000..b293f043c07f --- /dev/null +++ b/sys/dev/usb/if_axereg.h @@ -0,0 +1,178 @@ +/* + * Copyright (c) 1997, 1998, 1999, 2000-2003 + * Bill Paul <wpaul@windriver.com>. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by Bill Paul. + * 4. Neither the name of the author nor the names of any co-contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGE. + * + * $FreeBSD$ + */ + +/* + * Definitions for the ASIX Electronics AX88172 to ethernet controller. + */ + + +/* + * Vendor specific commands + * ASIX conveniently doesn't document the 'set NODEID' command in their + * datasheet (thanks a lot guys). + * To make handling these commands easier, I added some extra data + * which is decided by the axe_cmd() routine. Commands are encoded + * in 16 bites, with the format: LDCC. L and D are both nibbles in + * the high byte. L represents the data length (0 to 15) and D + * represents the direction (0 for vendor read, 1 for vendor write). + * CC is the command byte, as specified in the manual. + */ + +#define AXE_CMD_DIR(x) (((x) & 0x0F00) >> 8) +#define AXE_CMD_LEN(x) (((x) & 0xF000) >> 12) +#define AXE_CMD_CMD(x) ((x) & 0x00FF) + +#define AXE_CMD_READ_RXTX_SRAM 0x2002 +#define AXE_CMD_WRITE_RX_SRAM 0x0103 +#define AXE_CMD_WRITE_TX_SRAM 0x0104 +#define AXE_CMD_MII_OPMODE_SW 0x0106 +#define AXE_CMD_MII_READ_REG 0x2007 +#define AXE_CMD_MII_WRITE_REG 0x2108 +#define AXE_CMD_MII_READ_OPMODE 0x1009 +#define AXE_CMD_MII_OPMODE_HW 0x010A +#define AXE_CMD_SROM_READ 0x200B +#define AXE_CMD_SROM_WRITE 0x010C +#define AXE_CMD_SROM_WR_ENABLE 0x010D +#define AXE_CMD_SROM_WR_DISABLE 0x010E +#define AXE_CMD_RXCTL_READ 0x200F +#define AXE_CMD_RXCTL_WRITE 0x0110 +#define AXE_CMD_READ_IPG012 0x3011 +#define AXE_CMD_WRITE_IPG0 0x0112 +#define AXE_CMD_WRITE_IPG1 0x0113 +#define AXE_CMD_WRITE_IPG2 0x0114 +#define AXE_CMD_READ_MCAST 0x8015 +#define AXE_CMD_WRITE_MCAST 0x8116 +#define AXE_CMD_READ_NODEID 0x6017 +#define AXE_CMD_WRITE_NODEID 0x6118 +#define AXE_CMD_READ_PHYID 0x2019 +#define AXE_CMD_READ_MEDIA 0x101A +#define AXE_CMD_WRITE_MEDIA 0x011B +#define AXE_CMD_READ_MONITOR_MODE 0x101C +#define AXE_CMD_WRITE_MONITOR_MODE 0x011D +#define AXE_CMD_READ_GPIO 0x101E +#define AXE_CMD_WRITE_GPIO 0x011F + +#define AXE_RXCMD_PROMISC 0x0001 +#define AXE_RXCMD_ALLMULTI 0x0002 +#define AXE_RXCMD_UNICAST 0x0004 +#define AXE_RXCMD_BROADCAST 0x0008 +#define AXE_RXCMD_MULTICAST 0x0010 +#define AXE_RXCMD_ENABLE 0x0080 + +#define AXE_NOPHY 0xE0 + +#define AXE_TIMEOUT 1000 +#define AXE_BUFSZ 1536 +#define AXE_MIN_FRAMELEN 60 +#define AXE_RX_FRAMES 1 +#define AXE_TX_FRAMES 1 + +#define AXE_RX_LIST_CNT 1 +#define AXE_TX_LIST_CNT 1 + +#define AXE_CTL_READ 0x01 +#define AXE_CTL_WRITE 0x02 + +#define AXE_CONFIG_NO 1 + +/* + * The interrupt endpoint is currently unused + * by the ASIX part. + */ +#define AXE_ENDPT_RX 0x0 +#define AXE_ENDPT_TX 0x1 +#define AXE_ENDPT_INTR 0x2 +#define AXE_ENDPT_MAX 0x3 + +struct axe_type { + u_int16_t axe_vid; + u_int16_t axe_did; +}; + +struct axe_softc; + +struct axe_chain { + struct axe_softc *axe_sc; + usbd_xfer_handle axe_xfer; + char *axe_buf; + struct mbuf *axe_mbuf; + int axe_accum; + int axe_idx; +}; + +struct axe_cdata { + struct axe_chain axe_tx_chain[AXE_TX_LIST_CNT]; + struct axe_chain axe_rx_chain[AXE_RX_LIST_CNT]; + int axe_tx_prod; + int axe_tx_cons; + int axe_tx_cnt; + int axe_rx_prod; +}; + +#define AXE_INC(x, y) (x) = (x + 1) % y + +struct axe_softc { +#if defined(__FreeBSD__) +#define GET_MII(sc) (device_get_softc((sc)->axe_miibus)) +#elif defined(__NetBSD__) +#define GET_MII(sc) (&(sc)->axe_mii) +#elif defined(__OpenBSD__) +#define GET_MII(sc) (&(sc)->axe_mii) +#endif + struct arpcom arpcom; + device_t axe_miibus; + device_t axe_dev; + usbd_device_handle axe_udev; + usbd_interface_handle axe_iface; + int axe_ed[AXE_ENDPT_MAX]; + usbd_pipe_handle axe_ep[AXE_ENDPT_MAX]; + int axe_unit; + int axe_if_flags; + struct axe_cdata axe_cdata; + struct callout_handle axe_stat_ch; + struct mtx axe_mtx; + char axe_dying; + int axe_link; + unsigned char axe_ipgs[3]; + unsigned char axe_phyaddrs[2]; + struct timeval axe_rx_notice; +}; + +#if 0 +#define AXE_LOCK(_sc) mtx_lock(&(_sc)->axe_mtx) +#define AXE_UNLOCK(_sc) mtx_unlock(&(_sc)->axe_mtx) +#else +#define AXE_LOCK(_sc) +#define AXE_UNLOCK(_sc) +#endif |