diff options
Diffstat (limited to 'sys/dev/mse/mse.c')
-rw-r--r-- | sys/dev/mse/mse.c | 566 |
1 files changed, 0 insertions, 566 deletions
diff --git a/sys/dev/mse/mse.c b/sys/dev/mse/mse.c deleted file mode 100644 index 27a36f219ce0..000000000000 --- a/sys/dev/mse/mse.c +++ /dev/null @@ -1,566 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-2-Clause-FreeBSD - * - * Copyright (c) 2004 M. Warner Losh - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * $FreeBSD$ - */ - -/* - * Copyright 1992 by the University of Guelph - * - * Permission to use, copy and modify this - * software and its documentation for any purpose and without - * fee is hereby granted, provided that the above copyright - * notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting - * documentation. - * University of Guelph makes no representations about the suitability of - * this software for any purpose. It is provided "as is" - * without express or implied warranty. - */ -/* - * Driver for the Logitech and ATI Inport Bus mice for use with 386bsd and - * the X386 port, courtesy of - * Rick Macklem, rick@snowhite.cis.uoguelph.ca - * Caveats: The driver currently uses spltty(), but doesn't use any - * generic tty code. It could use splmse() (that only masks off the - * bus mouse interrupt, but that would require hacking in i386/isa/icu.s. - * (This may be worth the effort, since the Logitech generates 30/60 - * interrupts/sec continuously while it is open.) - * NB: The ATI has NOT been tested yet! - */ - -/* - * Modification history: - * Sep 6, 1994 -- Lars Fredriksen(fredriks@mcs.com) - * improved probe based on input from Logitech. - * - * Oct 19, 1992 -- E. Stark (stark@cs.sunysb.edu) - * fixes to make it work with Microsoft InPort busmouse - * - * Jan, 1993 -- E. Stark (stark@cs.sunysb.edu) - * added patches for new "select" interface - * - * May 4, 1993 -- E. Stark (stark@cs.sunysb.edu) - * changed position of some spl()'s in mseread - * - * October 8, 1993 -- E. Stark (stark@cs.sunysb.edu) - * limit maximum negative x/y value to -127 to work around XFree problem - * that causes spurious button pushes. - */ - -#include <sys/param.h> -#include <sys/systm.h> -#include <sys/conf.h> -#include <sys/kernel.h> -#include <sys/module.h> -#include <sys/bus.h> -#include <sys/poll.h> -#include <sys/selinfo.h> -#include <sys/uio.h> -#include <sys/mouse.h> - -#include <machine/bus.h> -#include <machine/resource.h> -#include <sys/rman.h> - -#include <isa/isavar.h> - -#include <dev/mse/msevar.h> - -devclass_t mse_devclass; - -static d_open_t mseopen; -static d_close_t mseclose; -static d_read_t mseread; -static d_ioctl_t mseioctl; -static d_poll_t msepoll; - -static struct cdevsw mse_cdevsw = { - .d_version = D_VERSION, - .d_open = mseopen, - .d_close = mseclose, - .d_read = mseread, - .d_ioctl = mseioctl, - .d_poll = msepoll, - .d_name = "mse", -}; - -static void mseintr(void *); -static void mseintr_locked(mse_softc_t *sc); -static void msetimeout(void *); - -#define MSE_NBLOCKIO(dev) (dev2unit(dev) != 0) - -#define MSEPRI (PZERO + 3) - -int -mse_common_attach(device_t dev) -{ - mse_softc_t *sc; - int unit, flags, rid; - - sc = device_get_softc(dev); - unit = device_get_unit(dev); - mtx_init(&sc->sc_lock, "mse", NULL, MTX_DEF); - callout_init_mtx(&sc->sc_callout, &sc->sc_lock, 0); - - rid = 0; - sc->sc_intr = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, - RF_ACTIVE); - if (sc->sc_intr == NULL) { - bus_release_resource(dev, SYS_RES_IOPORT, rid, sc->sc_port); - mtx_destroy(&sc->sc_lock); - return ENXIO; - } - - if (bus_setup_intr(dev, sc->sc_intr, INTR_TYPE_TTY | INTR_MPSAFE, - NULL, mseintr, sc, &sc->sc_ih)) { - bus_release_resource(dev, SYS_RES_IOPORT, rid, sc->sc_port); - bus_release_resource(dev, SYS_RES_IRQ, rid, sc->sc_intr); - mtx_destroy(&sc->sc_lock); - return ENXIO; - } - flags = device_get_flags(dev); - sc->mode.accelfactor = (flags & MSE_CONFIG_ACCEL) >> 4; - - sc->sc_dev = make_dev(&mse_cdevsw, 0, UID_ROOT, GID_WHEEL, 0600, - "mse%d", unit); - sc->sc_dev->si_drv1 = sc; - sc->sc_ndev = make_dev(&mse_cdevsw, 1, UID_ROOT, GID_WHEEL, 0600, - "nmse%d", unit); - sc->sc_ndev->si_drv1 = sc; - gone_in_dev(dev, 12, "mse(4) driver"); - - return 0; -} - -int -mse_detach(device_t dev) -{ - mse_softc_t *sc; - int rid; - - sc = device_get_softc(dev); - MSE_LOCK(sc); - if (sc->sc_flags & MSESC_OPEN) { - MSE_UNLOCK(sc); - return EBUSY; - } - - /* Sabotage subsequent opens. */ - sc->sc_mousetype = MSE_NONE; - MSE_UNLOCK(sc); - - destroy_dev(sc->sc_dev); - destroy_dev(sc->sc_ndev); - - rid = 0; - bus_teardown_intr(dev, sc->sc_intr, sc->sc_ih); - bus_release_resource(dev, SYS_RES_IRQ, rid, sc->sc_intr); - bus_release_resource(dev, SYS_RES_IOPORT, rid, sc->sc_port); - - callout_drain(&sc->sc_callout); - mtx_destroy(&sc->sc_lock); - - return 0; -} - -/* - * Exclusive open the mouse, initialize it and enable interrupts. - */ -static int -mseopen(struct cdev *dev, int flags, int fmt, struct thread *td) -{ - mse_softc_t *sc = dev->si_drv1; - - MSE_LOCK(sc); - if (sc->sc_mousetype == MSE_NONE) { - MSE_UNLOCK(sc); - return (ENXIO); - } - if (sc->sc_flags & MSESC_OPEN) { - MSE_UNLOCK(sc); - return (EBUSY); - } - sc->sc_flags |= MSESC_OPEN; - sc->sc_obuttons = sc->sc_buttons = MOUSE_MSC_BUTTONS; - sc->sc_deltax = sc->sc_deltay = 0; - sc->sc_bytesread = sc->mode.packetsize = MOUSE_MSC_PACKETSIZE; - sc->sc_watchdog = FALSE; - callout_reset(&sc->sc_callout, hz * 2, msetimeout, dev); - sc->mode.level = 0; - sc->status.flags = 0; - sc->status.button = sc->status.obutton = 0; - sc->status.dx = sc->status.dy = sc->status.dz = 0; - - /* - * Initialize mouse interface and enable interrupts. - */ - (*sc->sc_enablemouse)(sc->sc_port); - MSE_UNLOCK(sc); - return (0); -} - -/* - * mseclose: just turn off mouse innterrupts. - */ -static int -mseclose(struct cdev *dev, int flags, int fmt, struct thread *td) -{ - mse_softc_t *sc = dev->si_drv1; - - MSE_LOCK(sc); - callout_stop(&sc->sc_callout); - (*sc->sc_disablemouse)(sc->sc_port); - sc->sc_flags &= ~MSESC_OPEN; - MSE_UNLOCK(sc); - return(0); -} - -/* - * mseread: return mouse info using the MSC serial protocol, but without - * using bytes 4 and 5. - * (Yes this is cheesy, but it makes the X386 server happy, so...) - */ -static int -mseread(struct cdev *dev, struct uio *uio, int ioflag) -{ - mse_softc_t *sc = dev->si_drv1; - int xfer, error; - - /* - * If there are no protocol bytes to be read, set up a new protocol - * packet. - */ - MSE_LOCK(sc); - while (sc->sc_flags & MSESC_READING) { - if (MSE_NBLOCKIO(dev)) { - MSE_UNLOCK(sc); - return (0); - } - sc->sc_flags |= MSESC_WANT; - error = mtx_sleep(sc, &sc->sc_lock, MSEPRI | PCATCH, "mseread", - 0); - if (error) { - MSE_UNLOCK(sc); - return (error); - } - } - sc->sc_flags |= MSESC_READING; - xfer = 0; - if (sc->sc_bytesread >= sc->mode.packetsize) { - while (sc->sc_deltax == 0 && sc->sc_deltay == 0 && - (sc->sc_obuttons ^ sc->sc_buttons) == 0) { - if (MSE_NBLOCKIO(dev)) - goto out; - sc->sc_flags |= MSESC_WANT; - error = mtx_sleep(sc, &sc->sc_lock, MSEPRI | PCATCH, - "mseread", 0); - if (error) - goto out; - } - - /* - * Generate protocol bytes. - * For some reason X386 expects 5 bytes but never uses - * the fourth or fifth? - */ - sc->sc_bytes[0] = sc->mode.syncmask[1] - | (sc->sc_buttons & ~sc->mode.syncmask[0]); - if (sc->sc_deltax > 127) - sc->sc_deltax = 127; - if (sc->sc_deltax < -127) - sc->sc_deltax = -127; - sc->sc_deltay = -sc->sc_deltay; /* Otherwise mousey goes wrong way */ - if (sc->sc_deltay > 127) - sc->sc_deltay = 127; - if (sc->sc_deltay < -127) - sc->sc_deltay = -127; - sc->sc_bytes[1] = sc->sc_deltax; - sc->sc_bytes[2] = sc->sc_deltay; - sc->sc_bytes[3] = sc->sc_bytes[4] = 0; - sc->sc_bytes[5] = sc->sc_bytes[6] = 0; - sc->sc_bytes[7] = MOUSE_SYS_EXTBUTTONS; - sc->sc_obuttons = sc->sc_buttons; - sc->sc_deltax = sc->sc_deltay = 0; - sc->sc_bytesread = 0; - } - xfer = min(uio->uio_resid, sc->mode.packetsize - sc->sc_bytesread); - MSE_UNLOCK(sc); - error = uiomove(&sc->sc_bytes[sc->sc_bytesread], xfer, uio); - MSE_LOCK(sc); -out: - sc->sc_flags &= ~MSESC_READING; - if (error == 0) - sc->sc_bytesread += xfer; - if (sc->sc_flags & MSESC_WANT) { - sc->sc_flags &= ~MSESC_WANT; - MSE_UNLOCK(sc); - wakeup(sc); - } else - MSE_UNLOCK(sc); - return (error); -} - -/* - * mseioctl: process ioctl commands. - */ -static int -mseioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *td) -{ - mse_softc_t *sc = dev->si_drv1; - mousestatus_t status; - int err = 0; - - switch (cmd) { - - case MOUSE_GETHWINFO: - MSE_LOCK(sc); - *(mousehw_t *)addr = sc->hw; - if (sc->mode.level == 0) - ((mousehw_t *)addr)->model = MOUSE_MODEL_GENERIC; - MSE_UNLOCK(sc); - break; - - case MOUSE_GETMODE: - MSE_LOCK(sc); - *(mousemode_t *)addr = sc->mode; - switch (sc->mode.level) { - case 0: - break; - case 1: - ((mousemode_t *)addr)->protocol = MOUSE_PROTO_SYSMOUSE; - ((mousemode_t *)addr)->syncmask[0] = MOUSE_SYS_SYNCMASK; - ((mousemode_t *)addr)->syncmask[1] = MOUSE_SYS_SYNC; - break; - } - MSE_UNLOCK(sc); - break; - - case MOUSE_SETMODE: - switch (((mousemode_t *)addr)->level) { - case 0: - case 1: - break; - default: - return (EINVAL); - } - MSE_LOCK(sc); - if (((mousemode_t *)addr)->accelfactor < -1) { - MSE_UNLOCK(sc); - return (EINVAL); - } else if (((mousemode_t *)addr)->accelfactor >= 0) - sc->mode.accelfactor = - ((mousemode_t *)addr)->accelfactor; - sc->mode.level = ((mousemode_t *)addr)->level; - switch (sc->mode.level) { - case 0: - sc->sc_bytesread = sc->mode.packetsize - = MOUSE_MSC_PACKETSIZE; - break; - case 1: - sc->sc_bytesread = sc->mode.packetsize - = MOUSE_SYS_PACKETSIZE; - break; - } - MSE_UNLOCK(sc); - break; - - case MOUSE_GETLEVEL: - MSE_LOCK(sc); - *(int *)addr = sc->mode.level; - MSE_UNLOCK(sc); - break; - - case MOUSE_SETLEVEL: - switch (*(int *)addr) { - case 0: - MSE_LOCK(sc); - sc->mode.level = *(int *)addr; - sc->sc_bytesread = sc->mode.packetsize - = MOUSE_MSC_PACKETSIZE; - MSE_UNLOCK(sc); - break; - case 1: - MSE_LOCK(sc); - sc->mode.level = *(int *)addr; - sc->sc_bytesread = sc->mode.packetsize - = MOUSE_SYS_PACKETSIZE; - MSE_UNLOCK(sc); - break; - default: - return (EINVAL); - } - break; - - case MOUSE_GETSTATUS: - MSE_LOCK(sc); - status = sc->status; - sc->status.flags = 0; - sc->status.obutton = sc->status.button; - sc->status.button = 0; - sc->status.dx = 0; - sc->status.dy = 0; - sc->status.dz = 0; - MSE_UNLOCK(sc); - *(mousestatus_t *)addr = status; - break; - - case MOUSE_READSTATE: - case MOUSE_READDATA: - return (ENODEV); - - default: - return (ENOTTY); - } - return (err); -} - -/* - * msepoll: check for mouse input to be processed. - */ -static int -msepoll(struct cdev *dev, int events, struct thread *td) -{ - mse_softc_t *sc = dev->si_drv1; - int revents = 0; - - MSE_LOCK(sc); - if (events & (POLLIN | POLLRDNORM)) { - if (sc->sc_bytesread != sc->mode.packetsize || - sc->sc_deltax != 0 || sc->sc_deltay != 0 || - (sc->sc_obuttons ^ sc->sc_buttons) != 0) - revents |= events & (POLLIN | POLLRDNORM); - else - selrecord(td, &sc->sc_selp); - } - MSE_UNLOCK(sc); - return (revents); -} - -/* - * msetimeout: watchdog timer routine. - */ -static void -msetimeout(void *arg) -{ - struct cdev *dev; - mse_softc_t *sc; - - dev = (struct cdev *)arg; - sc = dev->si_drv1; - MSE_ASSERT_LOCKED(sc); - if (sc->sc_watchdog) { - if (bootverbose) - printf("%s: lost interrupt?\n", devtoname(dev)); - mseintr_locked(sc); - } - sc->sc_watchdog = TRUE; - callout_schedule(&sc->sc_callout, hz); -} - -/* - * mseintr: update mouse status. sc_deltax and sc_deltay are accumulative. - */ -static void -mseintr(void *arg) -{ - mse_softc_t *sc = arg; - - MSE_LOCK(sc); - mseintr_locked(sc); - MSE_UNLOCK(sc); -} - -static void -mseintr_locked(mse_softc_t *sc) -{ - /* - * the table to turn MouseSystem button bits (MOUSE_MSC_BUTTON?UP) - * into `mousestatus' button bits (MOUSE_BUTTON?DOWN). - */ - static int butmap[8] = { - 0, - MOUSE_BUTTON3DOWN, - MOUSE_BUTTON2DOWN, - MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN, - MOUSE_BUTTON1DOWN, - MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN, - MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN, - MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN - }; - int dx, dy, but; - int sign; - -#ifdef DEBUG - static int mse_intrcnt = 0; - if((mse_intrcnt++ % 10000) == 0) - printf("mseintr\n"); -#endif /* DEBUG */ - if ((sc->sc_flags & MSESC_OPEN) == 0) - return; - - (*sc->sc_getmouse)(sc->sc_port, &dx, &dy, &but); - if (sc->mode.accelfactor > 0) { - sign = (dx < 0); - dx = dx * dx / sc->mode.accelfactor; - if (dx == 0) - dx = 1; - if (sign) - dx = -dx; - sign = (dy < 0); - dy = dy * dy / sc->mode.accelfactor; - if (dy == 0) - dy = 1; - if (sign) - dy = -dy; - } - sc->sc_deltax += dx; - sc->sc_deltay += dy; - sc->sc_buttons = but; - - but = butmap[~but & MOUSE_MSC_BUTTONS]; - sc->status.dx += dx; - sc->status.dy += dy; - sc->status.flags |= ((dx || dy) ? MOUSE_POSCHANGED : 0) - | (sc->status.button ^ but); - sc->status.button = but; - - sc->sc_watchdog = FALSE; - - /* - * If mouse state has changed, wake up anyone wanting to know. - */ - if (sc->sc_deltax != 0 || sc->sc_deltay != 0 || - (sc->sc_obuttons ^ sc->sc_buttons) != 0) { - if (sc->sc_flags & MSESC_WANT) { - sc->sc_flags &= ~MSESC_WANT; - wakeup(sc); - } - selwakeuppri(&sc->sc_selp, MSEPRI); - } -} |