diff options
Diffstat (limited to 'sys/dev/drm2/radeon/atombios.h')
-rw-r--r-- | sys/dev/drm2/radeon/atombios.h | 16 |
1 files changed, 8 insertions, 8 deletions
diff --git a/sys/dev/drm2/radeon/atombios.h b/sys/dev/drm2/radeon/atombios.h index 8ef8196fb301..16119f442ca0 100644 --- a/sys/dev/drm2/radeon/atombios.h +++ b/sys/dev/drm2/radeon/atombios.h @@ -1797,7 +1797,7 @@ typedef struct _GET_ENGINE_CLOCK_PARAMETERS // Following Structures and constant may be obsolete /****************************************************************************/ //Maxium 8 bytes,the data read in will be placed in the parameter space. -//Read operaion successeful when the paramter space is non-zero, otherwise read operation failed +//Read operaion successeful when the parameter space is non-zero, otherwise read operation failed typedef struct _READ_EDID_FROM_HW_I2C_DATA_PARAMETERS { USHORT usPrescale; //Ratio between Engine clock and I2C clock @@ -4725,14 +4725,14 @@ ucUMAChannelNumber: System memory channel numbers. ulCSR_M3_ARB_CNTL_DEFAULT[10]: Arrays with values for CSR M3 arbiter for default ulCSR_M3_ARB_CNTL_UVD[10]: Arrays with values for CSR M3 arbiter for UVD playback. ulCSR_M3_ARB_CNTL_FS3D[10]: Arrays with values for CSR M3 arbiter for Full Screen 3D applications. -sAvail_SCLK[5]: Arrays to provide availabe list of SLCK and corresponding voltage, order from low to high +sAvail_SCLK[5]: Arrays to provide available list of SLCK and corresponding voltage, order from low to high ulGMCRestoreResetTime: GMC power restore and GMC reset time to calculate data reconnection latency. Unit in ns. ulMinimumNClk: Minimum NCLK speed among all NB-Pstates to calcualte data reconnection latency. Unit in 10kHz. ulIdleNClk: NCLK speed while memory runs in self-refresh state. Unit in 10kHz. ulDDR_DLL_PowerUpTime: DDR PHY DLL power up time. Unit in ns. ulDDR_PLL_PowerUpTime: DDR PHY PLL power up time. Unit in ns. -usPCIEClkSSPercentage: PCIE Clock Spred Spectrum Percentage in unit 0.01%; 100 mean 1%. -usPCIEClkSSType: PCIE Clock Spred Spectrum Type. 0 for Down spread(default); 1 for Center spread. +usPCIEClkSSPercentage: PCIE Clock Spread Spectrum Percentage in unit 0.01%; 100 mean 1%. +usPCIEClkSSType: PCIE Clock Spread Spectrum Type. 0 for Down spread(default); 1 for Center spread. usLvdsSSPercentage: LVDS panel ( not include eDP ) Spread Spectrum Percentage in unit of 0.01%, =0, use VBIOS default setting. usLvdsSSpreadRateIn10Hz: LVDS panel ( not include eDP ) Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. usHDMISSPercentage: HDMI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting. @@ -4926,7 +4926,7 @@ ucUMAChannelNumber: System memory channel numbers. ulCSR_M3_ARB_CNTL_DEFAULT[10]: Arrays with values for CSR M3 arbiter for default ulCSR_M3_ARB_CNTL_UVD[10]: Arrays with values for CSR M3 arbiter for UVD playback. ulCSR_M3_ARB_CNTL_FS3D[10]: Arrays with values for CSR M3 arbiter for Full Screen 3D applications. -sAvail_SCLK[5]: Arrays to provide availabe list of SLCK and corresponding voltage, order from low to high +sAvail_SCLK[5]: Arrays to provide available list of SLCK and corresponding voltage, order from low to high ulGMCRestoreResetTime: GMC power restore and GMC reset time to calculate data reconnection latency. Unit in ns. ulMinimumNClk: Minimum NCLK speed among all NB-Pstates to calcualte data reconnection latency. Unit in 10kHz. ulIdleNClk: NCLK speed while memory runs in self-refresh state. Unit in 10kHz. @@ -7600,7 +7600,7 @@ typedef struct _ATOM_PPLIB_SUMO_CLOCK_INFO{ UCHAR ucEngineClockHigh; //clockfrequency >> 16. UCHAR vddcIndex; //2-bit vddc index; USHORT tdpLimit; - //please initalize to 0 + //please initialize to 0 USHORT rsv1; //please initialize to 0s ULONG rsv2[2]; @@ -7979,8 +7979,8 @@ typedef struct { typedef struct { AMD_ACPI_DESCRIPTION_HEADER SHeader; UCHAR TableUUID[16]; //0x24 - ULONG VBIOSImageOffset; //0x34. Offset to the first GOP_VBIOS_CONTENT block from the beginning of the stucture. - ULONG Lib1ImageOffset; //0x38. Offset to the first GOP_LIB1_CONTENT block from the beginning of the stucture. + ULONG VBIOSImageOffset; //0x34. Offset to the first GOP_VBIOS_CONTENT block from the beginning of the structure. + ULONG Lib1ImageOffset; //0x38. Offset to the first GOP_LIB1_CONTENT block from the beginning of the structure. ULONG Reserved[4]; //0x3C }UEFI_ACPI_VFCT; |