diff options
Diffstat (limited to 'sys/dev/drm2/i915/dvo_ivch.c')
-rw-r--r-- | sys/dev/drm2/i915/dvo_ivch.c | 439 |
1 files changed, 0 insertions, 439 deletions
diff --git a/sys/dev/drm2/i915/dvo_ivch.c b/sys/dev/drm2/i915/dvo_ivch.c deleted file mode 100644 index 551f3795b90a..000000000000 --- a/sys/dev/drm2/i915/dvo_ivch.c +++ /dev/null @@ -1,439 +0,0 @@ -/* - * Copyright © 2006 Intel Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * Eric Anholt <eric@anholt.net> - * - */ - -#include <sys/cdefs.h> -__FBSDID("$FreeBSD$"); - -#include "dvo.h" - -/* - * register definitions for the i82807aa. - * - * Documentation on this chipset can be found in datasheet #29069001 at - * intel.com. - */ - -/* - * VCH Revision & GMBus Base Addr - */ -#define VR00 0x00 -# define VR00_BASE_ADDRESS_MASK 0x007f - -/* - * Functionality Enable - */ -#define VR01 0x01 - -/* - * Enable the panel fitter - */ -# define VR01_PANEL_FIT_ENABLE (1 << 3) -/* - * Enables the LCD display. - * - * This must not be set while VR01_DVO_BYPASS_ENABLE is set. - */ -# define VR01_LCD_ENABLE (1 << 2) -/** Enables the DVO repeater. */ -# define VR01_DVO_BYPASS_ENABLE (1 << 1) -/** Enables the DVO clock */ -# define VR01_DVO_ENABLE (1 << 0) - -/* - * LCD Interface Format - */ -#define VR10 0x10 -/** Enables LVDS output instead of CMOS */ -# define VR10_LVDS_ENABLE (1 << 4) -/** Enables 18-bit LVDS output. */ -# define VR10_INTERFACE_1X18 (0 << 2) -/** Enables 24-bit LVDS or CMOS output */ -# define VR10_INTERFACE_1X24 (1 << 2) -/** Enables 2x18-bit LVDS or CMOS output. */ -# define VR10_INTERFACE_2X18 (2 << 2) -/** Enables 2x24-bit LVDS output */ -# define VR10_INTERFACE_2X24 (3 << 2) - -/* - * VR20 LCD Horizontal Display Size - */ -#define VR20 0x20 - -/* - * LCD Vertical Display Size - */ -#define VR21 0x20 - -/* - * Panel power down status - */ -#define VR30 0x30 -/** Read only bit indicating that the panel is not in a safe poweroff state. */ -# define VR30_PANEL_ON (1 << 15) - -#define VR40 0x40 -# define VR40_STALL_ENABLE (1 << 13) -# define VR40_VERTICAL_INTERP_ENABLE (1 << 12) -# define VR40_ENHANCED_PANEL_FITTING (1 << 11) -# define VR40_HORIZONTAL_INTERP_ENABLE (1 << 10) -# define VR40_AUTO_RATIO_ENABLE (1 << 9) -# define VR40_CLOCK_GATING_ENABLE (1 << 8) - -/* - * Panel Fitting Vertical Ratio - * (((image_height - 1) << 16) / ((panel_height - 1))) >> 2 - */ -#define VR41 0x41 - -/* - * Panel Fitting Horizontal Ratio - * (((image_width - 1) << 16) / ((panel_width - 1))) >> 2 - */ -#define VR42 0x42 - -/* - * Horizontal Image Size - */ -#define VR43 0x43 - -/* VR80 GPIO 0 - */ -#define VR80 0x80 -#define VR81 0x81 -#define VR82 0x82 -#define VR83 0x83 -#define VR84 0x84 -#define VR85 0x85 -#define VR86 0x86 -#define VR87 0x87 - -/* VR88 GPIO 8 - */ -#define VR88 0x88 - -/* Graphics BIOS scratch 0 - */ -#define VR8E 0x8E -# define VR8E_PANEL_TYPE_MASK (0xf << 0) -# define VR8E_PANEL_INTERFACE_CMOS (0 << 4) -# define VR8E_PANEL_INTERFACE_LVDS (1 << 4) -# define VR8E_FORCE_DEFAULT_PANEL (1 << 5) - -/* Graphics BIOS scratch 1 - */ -#define VR8F 0x8F -# define VR8F_VCH_PRESENT (1 << 0) -# define VR8F_DISPLAY_CONN (1 << 1) -# define VR8F_POWER_MASK (0x3c) -# define VR8F_POWER_POS (2) - - -struct ivch_priv { - bool quiet; - - uint16_t width, height; -}; - - -static void ivch_dump_regs(struct intel_dvo_device *dvo); - -/** - * Reads a register on the ivch. - * - * Each of the 256 registers are 16 bits long. - */ -static bool ivch_read(struct intel_dvo_device *dvo, int addr, uint16_t *data) -{ - struct ivch_priv *priv = dvo->dev_priv; - device_t adapter = dvo->i2c_bus; - u8 out_buf[1]; - u8 in_buf[2]; - - struct iic_msg msgs[] = { - { - .slave = dvo->slave_addr << 1, - .flags = I2C_M_RD, - .len = 0, - }, - { - .slave = 0 << 1, - .flags = I2C_M_NOSTART, - .len = 1, - .buf = out_buf, - }, - { - .slave = dvo->slave_addr << 1, - .flags = I2C_M_RD | I2C_M_NOSTART, - .len = 2, - .buf = in_buf, - } - }; - - out_buf[0] = addr; - - if (-iicbus_transfer(adapter, msgs, 3) == 0) { - *data = (in_buf[1] << 8) | in_buf[0]; - return true; - } - - if (!priv->quiet) { - DRM_DEBUG_KMS("Unable to read register 0x%02x from " - "%s:%02x.\n", - addr, device_get_nameunit(adapter), dvo->slave_addr); - } - return false; -} - -/** Writes a 16-bit register on the ivch */ -static bool ivch_write(struct intel_dvo_device *dvo, int addr, uint16_t data) -{ - struct ivch_priv *priv = dvo->dev_priv; - device_t adapter = dvo->i2c_bus; - u8 out_buf[3]; - struct iic_msg msg = { - .slave = dvo->slave_addr << 1, - .flags = 0, - .len = 3, - .buf = out_buf, - }; - - out_buf[0] = addr; - out_buf[1] = data & 0xff; - out_buf[2] = data >> 8; - - if (-iicbus_transfer(adapter, &msg, 1) == 0) - return true; - - if (!priv->quiet) { - DRM_DEBUG_KMS("Unable to write register 0x%02x to %s:%d.\n", - addr, device_get_nameunit(adapter), dvo->slave_addr); - } - - return false; -} - -/** Probes the given bus and slave address for an ivch */ -static bool ivch_init(struct intel_dvo_device *dvo, - device_t adapter) -{ - struct ivch_priv *priv; - uint16_t temp; - - priv = malloc(sizeof(struct ivch_priv), DRM_MEM_KMS, M_NOWAIT | M_ZERO); - if (priv == NULL) - return false; - - dvo->i2c_bus = adapter; - dvo->dev_priv = priv; - priv->quiet = true; - - if (!ivch_read(dvo, VR00, &temp)) - goto out; - priv->quiet = false; - - /* Since the identification bits are probably zeroes, which doesn't seem - * very unique, check that the value in the base address field matches - * the address it's responding on. - */ - if ((temp & VR00_BASE_ADDRESS_MASK) != dvo->slave_addr) { - DRM_DEBUG_KMS("ivch detect failed due to address mismatch " - "(%d vs %d)\n", - (temp & VR00_BASE_ADDRESS_MASK), dvo->slave_addr); - goto out; - } - - ivch_read(dvo, VR20, &priv->width); - ivch_read(dvo, VR21, &priv->height); - - return true; - -out: - free(priv, DRM_MEM_KMS); - return false; -} - -static enum drm_connector_status ivch_detect(struct intel_dvo_device *dvo) -{ - return connector_status_connected; -} - -static enum drm_mode_status ivch_mode_valid(struct intel_dvo_device *dvo, - struct drm_display_mode *mode) -{ - if (mode->clock > 112000) - return MODE_CLOCK_HIGH; - - return MODE_OK; -} - -/** Sets the power state of the panel connected to the ivch */ -static void ivch_dpms(struct intel_dvo_device *dvo, bool enable) -{ - int i; - uint16_t vr01, vr30, backlight; - - /* Set the new power state of the panel. */ - if (!ivch_read(dvo, VR01, &vr01)) - return; - - if (enable) - backlight = 1; - else - backlight = 0; - ivch_write(dvo, VR80, backlight); - - if (enable) - vr01 |= VR01_LCD_ENABLE | VR01_DVO_ENABLE; - else - vr01 &= ~(VR01_LCD_ENABLE | VR01_DVO_ENABLE); - - ivch_write(dvo, VR01, vr01); - - /* Wait for the panel to make its state transition */ - for (i = 0; i < 100; i++) { - if (!ivch_read(dvo, VR30, &vr30)) - break; - - if (((vr30 & VR30_PANEL_ON) != 0) == enable) - break; - udelay(1000); - } - /* wait some more; vch may fail to resync sometimes without this */ - udelay(16 * 1000); -} - -static bool ivch_get_hw_state(struct intel_dvo_device *dvo) -{ - uint16_t vr01; - - /* Set the new power state of the panel. */ - if (!ivch_read(dvo, VR01, &vr01)) - return false; - - if (vr01 & VR01_LCD_ENABLE) - return true; - else - return false; -} - -static void ivch_mode_set(struct intel_dvo_device *dvo, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) -{ - uint16_t vr40 = 0; - uint16_t vr01; - - vr01 = 0; - vr40 = (VR40_STALL_ENABLE | VR40_VERTICAL_INTERP_ENABLE | - VR40_HORIZONTAL_INTERP_ENABLE); - - if (mode->hdisplay != adjusted_mode->hdisplay || - mode->vdisplay != adjusted_mode->vdisplay) { - uint16_t x_ratio, y_ratio; - - vr01 |= VR01_PANEL_FIT_ENABLE; - vr40 |= VR40_CLOCK_GATING_ENABLE; - x_ratio = (((mode->hdisplay - 1) << 16) / - (adjusted_mode->hdisplay - 1)) >> 2; - y_ratio = (((mode->vdisplay - 1) << 16) / - (adjusted_mode->vdisplay - 1)) >> 2; - ivch_write(dvo, VR42, x_ratio); - ivch_write(dvo, VR41, y_ratio); - } else { - vr01 &= ~VR01_PANEL_FIT_ENABLE; - vr40 &= ~VR40_CLOCK_GATING_ENABLE; - } - vr40 &= ~VR40_AUTO_RATIO_ENABLE; - - ivch_write(dvo, VR01, vr01); - ivch_write(dvo, VR40, vr40); - - ivch_dump_regs(dvo); -} - -static void ivch_dump_regs(struct intel_dvo_device *dvo) -{ - uint16_t val; - - ivch_read(dvo, VR00, &val); - DRM_LOG_KMS("VR00: 0x%04x\n", val); - ivch_read(dvo, VR01, &val); - DRM_LOG_KMS("VR01: 0x%04x\n", val); - ivch_read(dvo, VR30, &val); - DRM_LOG_KMS("VR30: 0x%04x\n", val); - ivch_read(dvo, VR40, &val); - DRM_LOG_KMS("VR40: 0x%04x\n", val); - - /* GPIO registers */ - ivch_read(dvo, VR80, &val); - DRM_LOG_KMS("VR80: 0x%04x\n", val); - ivch_read(dvo, VR81, &val); - DRM_LOG_KMS("VR81: 0x%04x\n", val); - ivch_read(dvo, VR82, &val); - DRM_LOG_KMS("VR82: 0x%04x\n", val); - ivch_read(dvo, VR83, &val); - DRM_LOG_KMS("VR83: 0x%04x\n", val); - ivch_read(dvo, VR84, &val); - DRM_LOG_KMS("VR84: 0x%04x\n", val); - ivch_read(dvo, VR85, &val); - DRM_LOG_KMS("VR85: 0x%04x\n", val); - ivch_read(dvo, VR86, &val); - DRM_LOG_KMS("VR86: 0x%04x\n", val); - ivch_read(dvo, VR87, &val); - DRM_LOG_KMS("VR87: 0x%04x\n", val); - ivch_read(dvo, VR88, &val); - DRM_LOG_KMS("VR88: 0x%04x\n", val); - - /* Scratch register 0 - AIM Panel type */ - ivch_read(dvo, VR8E, &val); - DRM_LOG_KMS("VR8E: 0x%04x\n", val); - - /* Scratch register 1 - Status register */ - ivch_read(dvo, VR8F, &val); - DRM_LOG_KMS("VR8F: 0x%04x\n", val); -} - -static void ivch_destroy(struct intel_dvo_device *dvo) -{ - struct ivch_priv *priv = dvo->dev_priv; - - if (priv) { - free(priv, DRM_MEM_KMS); - dvo->dev_priv = NULL; - } -} - -struct intel_dvo_dev_ops ivch_ops = { - .init = ivch_init, - .dpms = ivch_dpms, - .get_hw_state = ivch_get_hw_state, - .mode_valid = ivch_mode_valid, - .mode_set = ivch_mode_set, - .detect = ivch_detect, - .dump_regs = ivch_dump_regs, - .destroy = ivch_destroy, -}; |