diff options
Diffstat (limited to 'release/picobsd/floppy.tree/etc/rc.serial')
-rw-r--r-- | release/picobsd/floppy.tree/etc/rc.serial | 127 |
1 files changed, 0 insertions, 127 deletions
diff --git a/release/picobsd/floppy.tree/etc/rc.serial b/release/picobsd/floppy.tree/etc/rc.serial deleted file mode 100644 index 40fbd8a334cc..000000000000 --- a/release/picobsd/floppy.tree/etc/rc.serial +++ /dev/null @@ -1,127 +0,0 @@ -#!/bin/sh -# $FreeBSD$ - -# Change some defaults for serial devices. -# Standard defaults are: -# dtrwait 300 drainwait 0 -# initial cflag from <sys/ttydefaults.h> = cread cs8 hupcl -# initial iflag, lflag and oflag all 0 -# speed 9600 -# special chars from <sys/ttydefaults.h> -# nothing locked -# except for serial consoles the initial iflag, lflag and oflag are from -# <sys/ttydefaults.h> and clocal is locked on. - -default() { - # Reset everything changed by the other functions to initial defaults. - - ci=$1; shift # call in device identifier - co=$1; shift # call out device identifier - - for i in $* - do - comcontrol /dev/tty$ci$i dtrwait 300 drainwait 0 - stty </dev/ttyi$ci$i -clocal crtscts hupcl 9600 reprint ^R - stty </dev/ttyl$ci$i -clocal -crtscts -hupcl 0 - stty </dev/cuai$co$i -clocal crtscts hupcl 9600 reprint ^R - stty </dev/cual$co$i -clocal -crtscts -hupcl 0 - done -} - -maybe() { - # Special settings. - - ci=$1; shift - co=$1; shift - - for i in $* - do - # Don't use ^R; it breaks bash's ^R when typed ahead. - stty </dev/ttyi$ci$i reprint undef - stty </dev/cuai$co$i reprint undef - # Lock clocal off on dialin device for security. - stty </dev/ttyl$ci$i clocal - # Lock the speeds to use old binaries that don't support them. - # Any legal speed works to lock the initial speed. - stty </dev/ttyl$ci$i 300 - stty </dev/cual$co$i 300 - done -} - -modem() { - # Modem that supports CTS and perhaps RTS handshaking. - - ci=$1; shift - co=$1; shift - - for i in $* - do - # may depend on modem - comcontrol /dev/tty$ci$i dtrwait 100 drainwait 180 - # Lock crtscts on. - # Speed reasonable for V42bis. - stty </dev/ttyi$ci$i crtscts 57600 - stty </dev/ttyl$ci$i crtscts - stty </dev/cuai$co$i crtscts 57600 - stty </dev/cual$co$i crtscts - done -} - -mouse() { - # Mouse on either callin or callout port. - - ci=$1; shift - co=$1; shift - - for i in $* - do - # Lock clocal on, hupcl off. - # Standard speed for Microsoft mouse. - stty </dev/ttyi$ci$i clocal -hupcl 1200 - stty </dev/ttyl$ci$i clocal hupcl - stty </dev/cuai$co$i clocal -hupcl 1200 - stty </dev/cual$co$i clocal hupcl - done -} - -terminal() { - # Terminal that supports CTS and perhaps RTS handshaking - # with the cable or terminal arranged so that DCD is on - # at least while the terminal is on. - # Also works for bidirectional communications to another pc - # provided at most one side runs getty. - # Same as modem() except we want a faster speed and no dtrwait. - - ci=$1; shift - co=$1; shift - - modem $ci $co $* - for i in $* - do - comcontrol /dev/tty$ci$i dtrwait 0 - stty </dev/ttyi$ci$i 115200 - stty </dev/cuai$co$i 115200 - done -} - -# Don't use anything from this file unless you have some buggy programs -# that require it. - -# Edit the functions and the examples to suit your system. -# $1 is the call in device identifier, $2 is the call out device identifier -# and the remainder of the line lists the device numbers. - -# Initialize assorted 8250-16550 (sio) ports. -# maybe d a 0 1 2 3 4 5 6 7 8 9 a b c d e f g h i j k l m n o p q r s t u v -# mouse d a 2 -# modem d a 1 -# terminal d a 0 - -# Initialize all ports on a Cyclades-8yo. -# modem c c 00 01 02 03 04 05 06 07 - -# Initialize all ports on a Cyclades-16ye. -# modem c c 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f - -# Initialize all ports on a Digiboard 8. -# modem D D 00 01 02 03 04 05 06 07 |