diff options
Diffstat (limited to 'etc/etc.i386/inst2.profile')
| -rw-r--r-- | etc/etc.i386/inst2.profile | 440 |
1 files changed, 0 insertions, 440 deletions
diff --git a/etc/etc.i386/inst2.profile b/etc/etc.i386/inst2.profile deleted file mode 100644 index 92058a0314b3..000000000000 --- a/etc/etc.i386/inst2.profile +++ /dev/null @@ -1,440 +0,0 @@ -stty status '^T' -trap : 2 -trap : 3 -HOME=/; export HOME -PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/distbin; export PATH -if [ -e /fastboot ] -then - echo Fast boot ... skipping disk checks -else - echo Automatic reboot in progress... - fsck -p - case $? in - 0) - ;; - 2) - exit 1 - ;; - 4) - echo; echo README README README README README README README - echo - echo "NOTE: The above errors are expected if this is the" - echo "first time you have booted from the hard disk after" - echo "completing the floppy install"; echo - echo "Automatic file system check changed the root file system" - echo "The system must halt for these corrections to take effect" - echo - reboot - echo "reboot failed... help!" - exit 1 - ;; - 8) - echo "Automatic file system check failed... help!" - exit 1 - ;; - 12) - echo "Reboot interrupted" - exit 1 - ;; - 130) - exit 1 - ;; - *) - echo "Unknown error in reboot" - exit 1 - ;; - esac -fi - -trap 2 -trap "echo 'Reboot interrupted'; exit 1" 3 -umount -a >/dev/null 2>&1 -mount -a -t nonfs -rm -f /fastboot -(cd /var/run && { rm -rf -- *; cp /dev/null utmp; chmod 644 utmp; }) - -TERM=pc3 # terminal emulator, for elvis -TERMCAP="\ -pc3|ibmpc3:li#25:co#80:am:bs:bw:eo:cd=\E[J:ce=\E[K:cl=\Ec:cm=\E[%i%2;%2H:\ -do=\E[B:ho=\E[;H:nd=\E[C:up=\E[A:so=\E[7m:se=\E[0m:us=\E[4m:ue=\E[0m:\ -:ac=l\332q\304k\277x\263j\331m\300w\302u\264v\301t\303n\305:\ -:kb=^h:kh=\E[Y:ku=\E[A:kd=\E[B:kl=\E[D:kr=\E[C:" -OPSYSTEM=FreeBSD -RELEASE="1.1" -export TERMCAP -export TERM -echo "${OPSYSTEM} Base System Release ${RELEASE}" -echo "" -echo "Congratulations, you've got ${OPSYSTEM} on the hard disk!" -echo -echo "Press the return key for more installation instructions" -read junkit -echo -echo "To finish installation:" -echo "Pick a temporary directory by running set_tmp_dir. Make sure it's" -echo "in a place with lots of space, probably under /usr." -echo "Then, load the remaining distribution files into that temporary" -echo "directory by issuing one of the following commands:" -echo -echo " load_fd load_qic_tape load_scsi_tape" -echo -echo "or by fetching the files with ftp (see the installation notes for" -echo "information on how to do that)." -echo -echo "Once this is complete, extract the distribution files by issuing the" -echo "command 'extract <distribution>' where <distribution> is the base name" -echo "of the distribution files, e.g. 'base10'." -echo -echo "Once all of the filesets you wish to install have been extracted," -echo "enter the command 'configure' to finish setting up the system" -echo " " -echo "If you should wish to uninstall ${OPSYSTEM}, delete the partition by using the" -echo "DOS 5 FDISK program. If installed on the entire drive, use the FDISK/MBR" -echo "to remove the ${OPSYSTEM} bootstrap from the drive." -echo 'erase ^?, werase ^H, kill ^U, intr ^C' -stty newcrt werase intr kill erase 9600 -umask 0 -set_tmp_dir() -{ - def_tmp_dir=`pwd` - [ "$def_tmp_dir" = "/" ] && def_tmp_dir=/usr/distrib - echo -n "Copy files to which directory? [${def_tmp_dir}] " - read tmp_dir - [ ! "$tmp_dir" ] && tmp_dir=$def_tmp_dir - if [ ! -d "$tmp_dir" ]; then - /bin/rm -rf $tmp_dir - mkdir -p $tmp_dir - fi - echo -} -tmp_dir() -{ - if [ "$tmp_dir" = "" ]; then - set_tmp_dir - fi - cd $tmp_dir -} -load_fd() -{ - tmp_dir - drive= - altdrive= - subdir= - while [ -z "$drive" ]; do - echo -n "Read from which drive (or ? for help)? [c] " - read answer junk - case "${answer:-c}" in - a*b|A*B) - drive=A; altdrive=B - ;; - b*a|B*A) - drive=B; altdrive=A - ;; - a*|A*) - drive=A; altdrive=A - ;; - b*|B*) - drive=B; altdrive=B - ;; - c*|C*) - while read data; do - msdos_device=`expr X"$data" : 'X[ ]*\([^ ]*\)[^M]*pcfs'` - msdos_dir=`expr X"$data" : 'X[ ]*[^ ]*[ ]*\([^ ]*\)'` - [ "${msdos_device}" ] && break - done </etc/fstab - if [ ! "$msdos_device" ]; then - echo - echo "Cannot find MS-DOS in filesystem table" - continue - fi - drive=C; altdrive=C - while :; do - echo - echo -n "Read from which MS-DOS drive C: directory? [/] " - read resp junk - newdir=$(echo "${resp:-/}" | \ - awk '{ sub(/^[Cc]*:*/, ""); gsub(/\\/, "/"); gsub(/^\/*/, ""); gsub(/\/*$/, ""); print $0 }') - if [ -d ${msdos_dir}/${newdir} ]; then - subdir=$newdir - break - else - echo "C:/${newdir}: No such directory" - fi - done - ;; - q*|Q*) - drive=q - ;; - \?*) - echo - echo "Enter: To:" - echo "------ ---" - echo " a Read from floppy drive A:" - echo " b Read from floppy drive B:" - echo " c Read from MS-DOS hard drive C:" - echo " ab Alternate between A: and B:, starting with A:" - echo " ba Alternate between A: and B:, starting with B:" - echo " q Quit" - echo - ;; - esac - done - verbose=-v - interactive=-i - if [ "$drive" = "C" ]; then - dir=${msdos_dir} - elif [ "$drive" != "q" ]; then - dir=/tmp/floppy - [ -d $dir ] && umount $dir >/dev/null 2>&1 - [ -f $dir ] && rm -f $dir - mkdir -p $dir - fi - while [ "$drive" != "q" ] - do - device=/dev/fd0 - [ "$drive" = "B" ] && device=/dev/fd1 - [ "$drive" = "C" ] && device=${msdos_device} - echo; - if [ "$drive" != "C" ]; then - echo "Insert floppy in drive $drive:, then press RETURN to copy files," - echo -n "or enter option (? for help): " - else - echo -n "Press RETURN to copy files, or enter option (? for help): " - fi - read answer junk - case "${answer:-g}" in - c*|C*) - if [ "$drive" != "C" ]; then - echo "Cannot change directory: not reading from MS-DOS drive C:" - else - echo - echo -n "Read from which MS-DOS drive C: directory? [/${subdir}] " - read resp junk - [ ! "$resp" ] && resp="/$subdir" - absolute=`expr X"$resp" : 'X[Cc]*:*\([/\]\)'` - subsub=$(echo "${resp}" | \ - awk '{ sub(/^[Cc]*:*/, ""); gsub(/\\/, "/"); gsub(/^\/*/, ""); gsub(/\/*$/, ""); print $0 }') - if [ "$absolute" -o ! "$subdir" ]; then - newsub=$subsub - else - newsub=$subdir/$subsub - fi - if [ -d ${dir}/${newsub} ]; then - subdir=$newsub - else - echo "C:/${newsub}: No such directory" - fi - fi - ;; - g*|G*) - sync - if [ "$drive" = "C" ]; then - [ "$verbose" ] && - { echo; echo "Please wait. Copying files from MS-DOS C:/${subdir}"; } - cp ${msdos_dir}/${subdir}/* . - sync - elif mount -t pcfs $verbose $device $dir; then - [ "$verbose" ] && - { echo; echo "Please wait. Copying files to disk..."; } - cp $interactive $dir/* . - sync - umount $dir - tmp=$drive; drive=$altdrive; altdrive=$tmp - fi - ;; - i*|I*) - tmp=$interactive; interactive=; [ -z "$tmp" ] && interactive=-i - tmp=on; [ -z "$interactive" ] && tmp=off - echo "interactive mode is $tmp" - ;; - l*|L*) - sync - [ "$verbose" ] && echo "Directory of ${drive}:/${subdir}" - if [ "$drive" = "C" ]; then - ls -l $dir/${subdir} - else - umount $dir >/dev/null 2>&1 - if mount -t pcfs $device $dir; then - ls -l $dir/${subdir} - umount $dir - fi - fi - ;; - o*|O*) - tmp=$drive; drive=$altdrive; altdrive=$tmp - ;; - q*|Q*) - drive=q - ;; - s*|S*) - echo; echo -n "tmp_dir is set to $tmp_dir" - [ "$tmp_dir" != "`pwd`" ] && echo -n " (physically `pwd`)" - echo; echo "Free space in tmp_dir:" - df -k . - echo -n "Reading from drive $drive:" - [ "$drive" != "$altdrive" ] && echo -n " and drive $altdrive:" - echo - tmp=on; [ -z "$verbose" ] && tmp=off - echo "Verbose mode is $tmp" - tmp=on; [ -z "$interactive" ] && tmp=off - echo "Interactive mode is $tmp" - ;; - v*|V*) - tmp=$verbose; verbose=; [ -z "$tmp" ] && verbose=-v - tmp=on; [ -z "$verbose" ] && tmp=off - echo "verbose mode is $tmp" - ;; - \?) - echo - echo "Enter: To:" - echo "----- ---" - echo "(just RETURN) Copy files from ${drive}:/${subdir} to $tmp_dir" - echo " c Change directory of MS-DOS drive C:" - echo " i Toggle interactive mode (cp -i)" - echo " l List directory of current drive" - echo " o Read from alternate floppy drive" - echo " q Quit" - echo " s Show status" - echo " v Toggle verbose mode" - echo - ;; - esac - done - echo "Working directory: `pwd`" - unset verbose answer drive altdrive device dir subdir tmp interactive -} -load_qic_tape() -{ - tmp_dir - echo -n "Insert tape into QIC tape drive and hit return to continue: " - read foo - tar xvf /dev/rwt0 -} -load_scsi_tape() -{ - tmp_dir - echo -n "Insert tape into SCSI tape drive and hit return to continue: " - read foo - tar xvf /dev/nrst0 -} -extract() -{ - tmp_dir - echo -n "Would you like to be verbose about this? [n] " - read verbose - case $verbose in - y*|Y*) - tarverbose=--verbose - ;; - *) - tarverbose= - ;; - esac - #XXX ugly hack to eliminate busy files, copy them to /tmp and use them - #from there... - cp -p /bin/cat /usr/bin/gunzip /usr/bin/tar /tmp - - for i in $*; do - /tmp/cat "$i"* | - /tmp/gunzip | - (cd / ; /tmp/tar --extract --file - --preserve-permissions ${tarverbose} ) - done - rm -f /tmp/cat /tmp/gunzip /tmp/tar - sync -} -configure() -{ - echo "You will now be prompted for information about this" - echo "machine. If you hit return, the default answer (in" - echo "brackets) will be used." - - echo - echo -n "What is this machine's hostname? [unknown.host.domain] " - read hname - - if [ "$hname" = "" ]; then - hname=unknown.host.domain - fi - echo $hname > /etc/myname - proto_domain=`echo $hname | sed -e 's/[^.]*\.//'` - - echo - echo "What domain is this machine in (this is NOT its YP" - echo -n "domain name)? [$proto_domain] " - read dname - - if [ "$dname" = "" ]; then - dname=$proto_domain - fi - - echo - echo -n "Does this machine have an ethernet interface? [y] " - read resp - case "$resp" in - n*) - ;; - *) - intf= - while [ "$intf" = "" ]; do - echo -n "What is the primary interface name (i.e. we0, etc.)? " - read intf - done - echo -n "What is the hostname for this interface? [$hname] " - read ifname - if [ "$ifname" = "" ]; then - ifname=$hname - fi - ifaddr= - while [ "$ifaddr" = "" ]; do - echo -n "What is the IP address associated with this interface? " - read ifaddr - done - echo "$ifaddr $ifname `echo $ifname | sed -e s/\.$dname//`" \ - >> /etc/hosts - - echo -n "Does this interface have a special netmask? [n] " - read resp - case "$resp" in - y*) - echo -n "What is the netmask? [0xffffff00] " - read ifnetmask - if [ "$ifnetmask" = "" ]; then - ifnetmask=0xffffff00 - fi - ;; - *) - ifnetmask= - ;; - esac - - echo -n "Does this interface need additional flags? [n] " - read resp - case "$resp" in - y*) - echo -n "What flags? [llc0] " - read ifflags - if [ "$ifflags" = "" ]; then - ifflags=llc0 - fi - ;; - *) - ifflags= - ;; - esac - - echo "inet $ifname $ifnetmask $ifflags" > /etc/hostname.$intf - - echo "" - echo "WARNING: if you have any more ethernet interfaces, you" - echo "will have to configure them by hand. Read the comments" - echo "in /etc/netstart to learn how to do this" - ;; - esac - - sync - - echo - echo "OK. You should be completely set up now." - echo "You should now reboot your machine by issuing the 'reboot' command" - echo "after removing anything that happens to be in your floppy drive." -} |