diff options
Diffstat (limited to 'Makefile')
| -rw-r--r-- | Makefile | 53 |
1 files changed, 26 insertions, 27 deletions
@@ -35,22 +35,14 @@ DATAFORM= main LOCALTIME= Factory -# The POSIXRULES macro controls interpretation of nonstandard and obsolete -# POSIX-like TZ settings like TZ='EET-2EEST' that lack DST transition rules. -# Such a setting uses the rules in a template file to determine -# "spring forward" and "fall back" days and times; the environment -# variable itself specifies UT offsets of standard and daylight saving time. -# +# The POSIXRULES macro controls interpretation of POSIX-like TZ +# settings like TZ='EET-2EEST' that lack DST transition rules. # If POSIXRULES is '-', no template is installed; this is the default. -# # Any other value for POSIXRULES is obsolete and should not be relied on, as: # * It does not work correctly in popular implementations such as GNU/Linux. # * It does not work even in tzcode, except for historical timestamps # that precede the last explicit transition in the POSIXRULES file. # Hence it typically does not work for current and future timestamps. -# In short, software should avoid ruleless settings like TZ='EET-2EEST' -# and so should not depend on the value of POSIXRULES. -# # If, despite the above, you want a template for handling these settings, # you can change the line below (after finding the timezone you want in the # one of the $(TDATA) source files, or adding it to a source file). @@ -63,7 +55,7 @@ LOCALTIME= Factory POSIXRULES= - # Also see TZDEFRULESTRING below, which takes effect only -# if the time zone files cannot be accessed. +# if POSIXRULES is '-' or if the template file cannot be accessed. # Installation locations. @@ -211,7 +203,7 @@ LDLIBS= # -DHAVE_DECL_ENVIRON if <unistd.h> declares 'environ' # -DHAVE_DECL_TIMEGM=0 if <time.h> does not declare timegm # -DHAVE_DIRECT_H if mkdir needs <direct.h> (MS-Windows) -# -DHAVE_GENERIC=0 if _Generic does not work* +# -DHAVE__GENERIC=0 if _Generic does not work* # -DHAVE_GETRANDOM if getrandom works (e.g., GNU/Linux), # -DHAVE_GETRANDOM=0 to avoid using getrandom # -DHAVE_GETTEXT if gettext works (e.g., GNU/Linux, FreeBSD, Solaris), @@ -220,7 +212,7 @@ LDLIBS= # -DHAVE_INCOMPATIBLE_CTIME_R if your system's time.h declares # ctime_r and asctime_r incompatibly with the POSIX standard # (Solaris when _POSIX_PTHREAD_SEMANTICS is not defined). -# -DHAVE_INTTYPES_H=0 if <inttypes.h> does not work* +# -DHAVE_INTTYPES_H=0 if <inttypes.h> does not work*+ # -DHAVE_LINK=0 if your system lacks a link function # -DHAVE_LOCALTIME_R=0 if your system lacks a localtime_r function # -DHAVE_LOCALTIME_RZ=0 if you do not want zdump to use localtime_rz @@ -229,22 +221,24 @@ LDLIBS= # -DHAVE_POSIX_DECLS=0 if your system's include files do not declare # functions like 'link' or variables like 'tzname' required by POSIX # -DHAVE_SETENV=0 if your system lacks the setenv function -# -DHAVE_SNPRINTF=0 if your system lacks the snprintf function +# -DHAVE_SNPRINTF=0 if your system lacks the snprintf function+ # -DHAVE_STDCKDINT_H=0 if neither <stdckdint.h> nor substitutes like # __builtin_add_overflow work* -# -DHAVE_STDINT_H=0 if <stdint.h> does not work* +# -DHAVE_STDINT_H=0 if <stdint.h> does not work*+ # -DHAVE_STRFTIME_L if <time.h> declares locale_t and strftime_l # -DHAVE_STRDUP=0 if your system lacks the strdup function -# -DHAVE_STRTOLL=0 if your system lacks the strtoll function +# -DHAVE_STRTOLL=0 if your system lacks the strtoll function+ # -DHAVE_SYMLINK=0 if your system lacks the symlink function # -DHAVE_SYS_STAT_H=0 if <sys/stat.h> does not work* # -DHAVE_TZSET=0 if your system lacks a tzset function # -DHAVE_UNISTD_H=0 if <unistd.h> does not work* # -DHAVE_UTMPX_H=0 if <utmpx.h> does not work* # -Dlocale_t=XXX if your system uses XXX instead of locale_t +# -DPORT_TO_C89 if tzcode should also run on C89 platforms+ # -DRESERVE_STD_EXT_IDS if your platform reserves standard identifiers # with external linkage, e.g., applications cannot define 'localtime'. # -Dssize_t=long on hosts like MS-Windows that lack ssize_t +# -DSUPPORT_C89 if the tzcode library should support C89 callers+ # -DSUPPRESS_TZDIR to not prepend TZDIR to file names; this has # security implications and is not recommended for general use # -DTHREAD_SAFE to make localtime.c thread-safe, as POSIX requires; @@ -256,7 +250,13 @@ LDLIBS= # -DTZ_DOMAINDIR=\"/path\" to use "/path" for gettext directory; # the default is system-supplied, typically "/usr/lib/locale" # -DTZDEFRULESTRING=\",date/time,date/time\" to default to the specified -# DST transitions if the time zone files cannot be accessed +# DST transitions for POSIX-style TZ strings lacking them, +# in the usual case where POSIXRULES is '-'. If not specified, +# TZDEFRULESTRING defaults to US rules for future DST transitions. +# This mishandles some past timestamps, as US DST rules have changed. +# It also mishandles settings like TZ='EET-2EEST' for eastern Europe, +# as Europe and US DST rules differ. +# -DTZNAME_MAXIMUM=N to limit time zone abbreviations to N bytes (default 255) # -DUNINIT_TRAP if reading uninitialized storage can cause problems # other than simply getting garbage data # -DUSE_LTZ=0 to build zdump with the system time zone library @@ -273,6 +273,8 @@ LDLIBS= # $(GCC_DEBUG_FLAGS) if you are using recent GCC and want lots of checking # # * Options marked "*" can be omitted if your compiler is C23 compatible. +# * Options marked "+" are obsolescent and are planned to be removed +# once the code assumes C99 or later. # # Select instrumentation via "make GCC_INSTRUMENT='whatever'". GCC_INSTRUMENT = \ @@ -363,7 +365,7 @@ GCC_DEBUG_FLAGS = -DGCC_LINT -g3 -O3 -fno-common \ # -DNETBSD_INSPIRED=0 # to the end of the "CFLAGS=" line. Otherwise, the functions # "localtime_rz", "mktime_z", "tzalloc", and "tzfree" are added to the -# time library, and if STD_INSPIRED is also defined the functions +# time library, and if STD_INSPIRED is also defined to nonzero the functions # "posix2time_z" and "time2posix_z" are added as well. # The functions ending in "_z" (or "_rz") are like their unsuffixed # (or suffixed-by-"_r") counterparts, except with an extra first @@ -455,16 +457,13 @@ SAFE_CHARSET3= 'abcdefghijklmnopqrstuvwxyz{|}~' SAFE_CHARSET= $(SAFE_CHARSET1)$(SAFE_CHARSET2)$(SAFE_CHARSET3) SAFE_CHAR= '[]'$(SAFE_CHARSET)'-]' -# These characters are Latin-1, and so are likely to be displayable -# even in editors with limited character sets. -UNUSUAL_OK_LATIN_1 = «°±»½¾× -# This IPA symbol is represented in Unicode as the composition of -# U+0075 and U+032F, and U+032F is not considered alphabetic by some -# grep implementations that do not grok composition. -UNUSUAL_OK_IPA = u̯ +# These non-alphabetic, non-ASCII printable characters are Latin-1, +# and so are likely displayable even in editors like XEmacs 21 +# that have limited display capabilities. +UNUSUAL_OK_LATIN_1 = ¡¢£¤¥¦§¨©«¬®¯°±²³´¶·¸¹»¼½¾¿×÷ # Non-ASCII non-letters that OK_CHAR allows, as these characters are # useful in commentary. -UNUSUAL_OK_CHARSET= $(UNUSUAL_OK_LATIN_1)$(UNUSUAL_OK_IPA) +UNUSUAL_OK_CHARSET= $(UNUSUAL_OK_LATIN_1) # Put this in a bracket expression to match spaces. s = [:space:] @@ -833,7 +832,7 @@ check_slashed_abbrs: $(TDATA_TO_CHECK) CHECK_CC_LIST = { n = split($$1,a,/,/); for (i=2; i<=n; i++) print a[1], a[i]; } -check_sorted: backward backzone iso3166.tab zone.tab zone1970.tab +check_sorted: backward backzone $(AWK) '/^Link/ {printf "%.5d %s\n", g, $$3} !/./ {g++}' \ backward | LC_ALL=C sort -cu $(AWK) '/^Zone/ {print $$2}' backzone | LC_ALL=C sort -cu |