Remove old config file for SENTRY5

This is an older broadcom part that implements the mips32 ISA. 32-bit
FreeBSD/mips now requires mips32r2, so retire this config. Most of the
broadcom port is shared with newer ports, so what little code may be
unique to this part has not been GC'd at this time.

Discussed on: freebsd-mips@
Differential Revision: https://reviews.freebsd.org/D18543

2 files changed, 0 insertions, 98 deletions

diff --git a/sys/mips/conf/SENTRY5 b/sys/mips/conf/SENTRY5
deleted file mode 100644
index 08d7c4b661e5..000000000000
--- a/sys/mips/conf/SENTRY5
+++ /dev/null
@@ -1,91 +0,0 @@
-#
-# $FreeBSD$
-#
-# The Broadcom Sentry5 series of processors and boards is very commonly
-# used in COTS hardware including the Netgear WGT634U.
-#
-# Some tweaks are needed for use with this platform:
-#
-# * CFE firmware's ELF loader expects an ELF kernel which is linked so as
-#   not to contain offsets in PT_LOAD which point behind the actual offset
-#   of that PT header. FreeBSD normally links the first PT_LOAD header to
-#   begin at offset 0.
-#
-# * Broadcom's support package for the internal bus, the Sonics
-#   SiliconBackplane, needs to be integrated to detect and probe hardware
-#   correctly.
-#
-# * The clock needs to be calibrated correctly, so that DELAY() may work.
-#   One problem with this is that the low-level printf() routine calls DELAY(),
-#   which currently causes divide-by-zero trap
-#
-# * The Broadcom CPUs have no FPU. Attempting to detect one by reading CP1's
-#   status register causes an unhandled boot-time exception. An FPU emulator
-#   will be necessary to support multi-user boot.
-#
-
-ident		SENTRY5
-cpu		CPU_MIPS4KC
-makeoptions	TRAMPLOADADDR=0x807963c0
-
-hints		"SENTRY5.hints"
-include		"../broadcom/std.broadcom"
-
-# sentry5 normally ships with cfe firmware
-options 	CFE
-options 	ALT_BREAK_TO_DEBUGGER
-device		cfe
-
-makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols
-makeoptions	MODULES_OVERRIDE=""
-
-options 	DDB
-options 	KDB
-
-options 	SCHED_4BSD		#4BSD scheduler
-options 	INET			#InterNETworking
-options 	TCP_HHOOK		# hhook(9) framework for TCP
-options 	NFSCL			#Network Filesystem Client
-options 	NFS_ROOT		#NFS usable as /, requires NFSCL
-options 	PSEUDOFS		#Pseudo-filesystem framework
-options 	_KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
-
-# Debugging for use in -current
-#options 	DEADLKRES
-options 	INVARIANTS
-options 	INVARIANT_SUPPORT
-
-#options 	BUS_DEBUG
-#makeoptions	BUS_DEBUG
-options 	EARLY_PRINTF
-
-device		bhnd
-device		siba
-device		siba_nexus
-device		bhnd_pcib
-device		pci			# bhnd_pcib
-
-# device 	bfe			# XXX will build both pci and siba
-# device 	miibus			# attachments
-
-# pci devices
-# notyet:
-#device		ath			# in pci slot
-#device		ath_pci			# Atheros pci/cardbus glue
-#device		ath_hal			# pci chip support
-#options 	AH_SUPPORT_AR5416	# enable AR5416 tx/rx descriptors
-
-options 	USB_DEBUG		# enable debug msgs
-device		usb			# USB Bus (required)
-device		uhci			# UHCI PCI->USB interface
-device		ehci			# EHCI PCI->USB interface (USB 2.0)
-
-device		cfi			# parallel flash
-device		cfid
-
-device		gpio
-device		uart
-
-device		loop
-device		ether
-device		md
diff --git a/sys/mips/conf/SENTRY5.hints b/sys/mips/conf/SENTRY5.hints
deleted file mode 100644
index d25a64e7d634..000000000000
--- a/sys/mips/conf/SENTRY5.hints
+++ /dev/null
@@ -1,7 +0,0 @@
-# $FreeBSD$
-hint.bhnd.0.at="nexus0"
-hint.bhnd.0.maddr="0x18000000" 
-hint.bhnd.0.msize="0x00100000"
-
-# NVRAM via CFE
-hint.bhnd_nvram.0.at="nexus0"