Remove dead mentions of CAM target mode APIs from drivers.

This makes grepping kernel for target mode implementation much easier.

1 files changed, 9 insertions, 153 deletions

diff --git a/sys/dev/trm/trm.c b/sys/dev/trm/trm.c
index a205929c6ec9..5374807f2c11 100644
--- a/sys/dev/trm/trm.c
+++ b/sys/dev/trm/trm.c
@@ -543,11 +543,6 @@ trm_action(struct cam_sim *psim, union ccb *pccb)
 	target_lun = pccb->ccb_h.target_lun;
 
 	switch (pccb->ccb_h.func_code) {
-		case XPT_NOOP:	        	
-			TRM_DPRINTF(" XPT_NOOP \n");
-			pccb->ccb_h.status = CAM_REQ_INVALID;
-			xpt_done(pccb);
-			break;
 		/*
 		 * Execute the requested I/O operation 
 	 	 */
@@ -623,16 +618,6 @@ trm_action(struct cam_sim *psim, union ccb *pccb)
 			}
 			break;
 		}
-		case XPT_GDEV_TYPE:		    
-			TRM_DPRINTF(" XPT_GDEV_TYPE \n");
-	    		pccb->ccb_h.status = CAM_REQ_INVALID;
-			xpt_done(pccb);
-			break;
-		case XPT_GDEVLIST:		    
-			TRM_DPRINTF(" XPT_GDEVLIST \n");
-			pccb->ccb_h.status = CAM_REQ_INVALID;
-			xpt_done(pccb);
-			break;
 		/*
 		 * Path routing inquiry 
 	       	 * Path Inquiry CCB 
@@ -661,76 +646,33 @@ trm_action(struct cam_sim *psim, union ccb *pccb)
 			cpi->protocol_version = SCSI_REV_2;
 			cpi->ccb_h.status = CAM_REQ_CMP;
 			xpt_done(pccb);
-				   }
 			break;
+		}
 		/*
-		 * Release a frozen SIM queue 
-		 * Release SIM Queue 
+		 * XPT_ABORT = 0x10, Abort the specified CCB
+		 * Abort XPT request CCB
 		 */
-		case XPT_REL_SIMQ:		    
-			TRM_DPRINTF(" XPT_REL_SIMQ \n");
-			pccb->ccb_h.status = CAM_REQ_INVALID;
-			xpt_done(pccb);
-			break;
-		/*
-		 * Set Asynchronous Callback Parameters 
-		 * Set Asynchronous Callback CCB
- 		 */
-		case XPT_SASYNC_CB:		    
-			TRM_DPRINTF(" XPT_SASYNC_CB \n");
-			pccb->ccb_h.status = CAM_REQ_INVALID;
-			xpt_done(pccb);
-			break;
-		/*
-		 * Set device type information 
-		 * Set Device Type CCB 
- 		 */
-		case XPT_SDEV_TYPE:		    
-			TRM_DPRINTF(" XPT_SDEV_TYPE \n");
-			pccb->ccb_h.status = CAM_REQ_INVALID;
-			xpt_done(pccb);
-			break;
-		/*
-		 * Get EDT entries matching the given pattern 
- 		 */
-		case XPT_DEV_MATCH:	    	
-			TRM_DPRINTF(" XPT_DEV_MATCH \n");
-	    		pccb->ccb_h.status = CAM_REQ_INVALID;
-			xpt_done(pccb);
-			break;
-		/*
-		 * Turn on debugging for a bus, target or lun 
-      		 */
-		case XPT_DEBUG:	    	    
-			TRM_DPRINTF(" XPT_DEBUG \n");
-			pccb->ccb_h.status = CAM_REQ_INVALID;
-			xpt_done(pccb);
-			break;
-			/*
-			 * XPT_ABORT = 0x10, Abort the specified CCB 
-			 * Abort XPT request CCB 
-			 */
 		case XPT_ABORT:             
 			TRM_DPRINTF(" XPT_ABORT \n");
 			pccb->ccb_h.status = CAM_REQ_INVALID;
 			xpt_done(pccb);
 			break;
 		/*
-		 * Reset the specified SCSI bus 
-		 * Reset SCSI Bus CCB 
- 		 */
-		case XPT_RESET_BUS: {		
+		 * Reset the specified SCSI bus
+		 * Reset SCSI Bus CCB
+		 */
+		case XPT_RESET_BUS: {
 			int i;
 
 			TRM_DPRINTF(" XPT_RESET_BUS \n");
-	    		trm_reset(pACB);
+			trm_reset(pACB);
 			pACB->ACBFlag=0;
 			for (i=0; i<500; i++)
 				DELAY(1000);
 			pccb->ccb_h.status = CAM_REQ_CMP;
 			xpt_done(pccb);
-				    }
 			break;
+		}
 		/*
 		 * Bus Device Reset the specified SCSI device 
 		 * Reset SCSI Device CCB 
@@ -929,92 +871,6 @@ trm_action(struct cam_sim *psim, union ccb *pccb)
 			cam_calc_geometry(&pccb->ccg, /*extended*/1);
 			xpt_done(pccb);
 			break;
-		case XPT_ENG_INQ:           
-			TRM_DPRINTF(" XPT_ENG_INQ \n");
-	    		pccb->ccb_h.status = CAM_REQ_INVALID;
-			xpt_done(pccb);
-			break;
-		/*
-		 * HBA execute engine request 
-		 * This structure must match SCSIIO size 
-		 */
-		case XPT_ENG_EXEC:		    
-			TRM_DPRINTF(" XPT_ENG_EXEC \n");
-	    		pccb->ccb_h.status = CAM_REQ_INVALID;
-			xpt_done(pccb);
-			break;
-		/*
-		 * XPT_EN_LUN = 0x30, Enable LUN as a target 
-		 * Target mode structures. 
-	 	 */
-		case XPT_EN_LUN:            
-		/*
-		 * Don't (yet?) support vendor
-		 * specific commands.
-		 */
-			TRM_DPRINTF(" XPT_EN_LUN \n");
-			pccb->ccb_h.status = CAM_REQ_INVALID;
-			xpt_done(pccb);
-			break;
-		/*
-		* Execute target I/O request 
-		*/
-		case XPT_TARGET_IO:		    
-		/*
-		 * Don't (yet?) support vendor
-		 * specific commands.
-		 */
-			TRM_DPRINTF(" XPT_TARGET_IO \n");
-			pccb->ccb_h.status = CAM_REQ_INVALID;
-			xpt_done(pccb);
-			break;
-		/*
-		 * Accept Host Target Mode CDB 
-       		 */
-		case XPT_ACCEPT_TARGET_IO:	
-		/*
-		 * Don't (yet?) support vendor
-		 * specific commands.
-		 */
-			TRM_DPRINTF(" XPT_ACCEPT_TARGET_IO \n");
-			pccb->ccb_h.status = CAM_REQ_INVALID;
-			xpt_done(pccb);
-			break;
-		/*
-		 * Continue Host Target I/O Connection 
- 		 */
-		case XPT_CONT_TARGET_IO:  	
-		/*
-		 * Don't (yet?) support vendor
-		 * specific commands.
-		 */
-			TRM_DPRINTF(" XPT_CONT_TARGET_IO \n");
-			pccb->ccb_h.status = CAM_REQ_INVALID;
-			xpt_done(pccb);
-			break;
-		/*
-		 * Notify Host Target driver of event 
- 		 */
-		case XPT_IMMED_NOTIFY:	    
-			TRM_DPRINTF(" XPT_IMMED_NOTIFY \n");
-	    		pccb->ccb_h.status = CAM_REQ_INVALID;
-			xpt_done(pccb);
-			break;
-		/*
-		 * Acknowledgement of event
-       		 */
-		case XPT_NOTIFY_ACK:	    
-			TRM_DPRINTF(" XPT_NOTIFY_ACK \n");
-	    		pccb->ccb_h.status = CAM_REQ_INVALID;
-			xpt_done(pccb);
-			break;
-		/*
-		 * XPT_VUNIQUE = 0x80
-		 */
-		case XPT_VUNIQUE:   
-			pccb->ccb_h.status = CAM_REQ_INVALID;
-			xpt_done(pccb);
-			break;
 		default:
 			pccb->ccb_h.status = CAM_REQ_INVALID;
 			xpt_done(pccb);