MFp4: Large set of CAM inprovements.

- Unify bus reset/probe sequence. Whenever bus attached at boot or later,
CAM will automatically reset and scan it. It allows to remove duplicate
code from many drivers.
- Any bus, attached before CAM completed it's boot-time initialization,
will equally join to the process, delaying boot if needed.
- New kern.cam.boot_delay loader tunable should help controllers that
are still unable to register their buses in time (such as slow USB/
PCCard/ CardBus devices), by adding one more event to wait on boot.
- To allow synchronization between different CAM levels, concept of
requests priorities was extended. Priorities now split between several
"run levels". Device can be freezed at specified level, allowing higher
priority requests to pass. For example, no payload requests allowed,
until PMP driver enable port. ATA XPT negotiate transfer parameters,
periph driver configure caching and so on.
- Frozen requests are no more counted by request allocation scheduler.
It fixes deadlocks, when frozen low priority payload requests occupying
slots, required by higher levels to manage theit execution.
- Two last changes were holding proper ATA reinitialization and error
recovery implementation. Now it is done: SATA controllers and Port
Multipliers now implement automatic hot-plug and should correctly
recover from timeouts and bus resets.
- Improve SCSI error recovery for devices on buses without automatic sense
reporting, such as ATAPI or USB. For example, it allows CAM to wait, while
CD drive loads disk, instead of immediately return error status.
- Decapitalize diagnostic messages and make them more readable and sensible.
- Teach PMP driver to limit maximum speed on fan-out ports.
- Make boot wait for PMP scan completes, and make rescan more reliable.
- Fix pass driver, to return CCB to user level in case of error.
- Increase number of retries in cd driver, as device may return several UAs.

2 files changed, 8 insertions, 25 deletions

diff --git a/sys/dev/hptrr/hptrr_osm_bsd.c b/sys/dev/hptrr/hptrr_osm_bsd.c
index 78c8b60fe2e1..6bc30c22b36f 100644
--- a/sys/dev/hptrr/hptrr_osm_bsd.c
+++ b/sys/dev/hptrr/hptrr_osm_bsd.c
@@ -989,7 +989,6 @@ static void hpt_stop_tasks(PVBUS_EXT vbus_ext)
 static	d_open_t	hpt_open;
 static	d_close_t	hpt_close;
 static	d_ioctl_t	hpt_ioctl;
-static	void		hpt_bus_scan_cb(struct cam_periph *periph, union ccb *ccb);
 static  int 		hpt_rescan_bus(void);
 
 static struct cdevsw hpt_cdevsw = {
@@ -1381,7 +1380,6 @@ invalid:
 
 static int	hpt_rescan_bus(void)
 {
-	struct cam_path		*path;
 	union ccb			*ccb;
 	PVBUS 				vbus;
 	PVBUS_EXT			vbus_ext;	
@@ -1391,17 +1389,15 @@ static int	hpt_rescan_bus(void)
 #endif
 
 	ldm_for_each_vbus(vbus, vbus_ext) {
-		if (xpt_create_path(&path, xpt_periph, cam_sim_path(vbus_ext->sim),
-			CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP)	
-			return(EIO);
-		if ((ccb = malloc(sizeof(union ccb), M_TEMP, M_WAITOK)) == NULL)
+		if ((ccb = xpt_alloc_ccb()) == NULL)
 			return(ENOMEM);
-		bzero(ccb, sizeof(union ccb));
-		xpt_setup_ccb(&ccb->ccb_h, path, 5);
-		ccb->ccb_h.func_code = XPT_SCAN_BUS;
-		ccb->ccb_h.cbfcnp = hpt_bus_scan_cb;
-		ccb->crcn.flags = CAM_FLAG_NONE;
-		xpt_action(ccb);
+		if (xpt_create_path(&ccb->ccb_h.path, xpt_periph,
+		    cam_sim_path(vbus_ext->sim),
+		    CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
+			xpt_free_ccb(ccb);
+			return(EIO);
+		}
+		xpt_rescan(ccb);
 	}
 	
 #if (__FreeBSD_version >= 500000)
@@ -1410,15 +1406,3 @@ static int	hpt_rescan_bus(void)
 
 	return(0);	
 }
-
-static	void	hpt_bus_scan_cb(struct cam_periph *periph, union ccb *ccb)
-{
-	if (ccb->ccb_h.status != CAM_REQ_CMP)
-		KdPrint(("cam_scan_callback: failure status = %x",ccb->ccb_h.status));
-	else
-		KdPrint(("Scan bus successfully!"));
-
-	xpt_free_path(ccb->ccb_h.path);
-	free(ccb, M_TEMP);
-	return;
-}
diff --git a/sys/dev/hptrr/os_bsd.h b/sys/dev/hptrr/os_bsd.h
index fb487e820b67..ec221f39b90a 100644
--- a/sys/dev/hptrr/os_bsd.h
+++ b/sys/dev/hptrr/os_bsd.h
@@ -91,7 +91,6 @@
 #include <cam/cam_sim.h>
 #include <cam/cam_xpt_sim.h>
 #include <cam/cam_debug.h>
-#include <cam/cam_xpt_periph.h>
 #include <cam/cam_periph.h>
 #include <cam/scsi/scsi_all.h>
 #include <cam/scsi/scsi_message.h>