unexpand -a everything

1 files changed, 138 insertions, 138 deletions

diff --git a/sys/dev/asr/i2oadptr.h b/sys/dev/asr/i2oadptr.h
index e117ed4d1c52..fefbdcb189bf 100644
--- a/sys/dev/asr/i2oadptr.h
+++ b/sys/dev/asr/i2oadptr.h
@@ -2,16 +2,16 @@
  * Copyright (c) 1996-2000 Distributed Processing Technology Corporation
  * Copyright (c) 2000 Adaptec Corproation.
  * All rights reserved.
- * 
- * Copyright 1999 I2O Special Interest Group (I2O SIG).  All rights reserved.
+ *
+ * Copyright 1999 I2O Special Interest Group (I2O SIG).	 All rights reserved.
  * All rights reserved
- * 
+ *
  * TERMS AND CONDITIONS OF USE
- * 
+ *
  * Redistribution and use in source form, with or without modification, are
  * permitted provided that redistributions of source code must retain the
  * above copyright notice, this list of conditions and the following disclaimer.
- * 
+ *
  * This software is provided `as is' by Distributed Processing Technology and
  * any express or implied warranties, including, but not limited to, the
  * implied warranties of merchantability and fitness for a particular purpose,
@@ -23,56 +23,56 @@
  * contract, strict liability, or tort (including negligence or otherwise)
  * arising in any way out of the use of this driver software, even if advised
  * of the possibility of such damage.
- * 
+ *
  * This header file, and any modifications of this header file, are provided
  * contingent upon your agreement and adherence to the here-listed terms and
- * conditions.  By accepting and/or using this header file, you agree to abide
+ * conditions.	By accepting and/or using this header file, you agree to abide
  * by these terms and conditions and that these terms and conditions will be
  * construed and governed in accordance with the laws of the State of California,
  * without reference to conflict-of-law provisions.  If you do not agree
  * to these terms and conditions, please delete this file, and any copies,
  * permanently, without making any use thereof.
- * 
+ *
  * THIS HEADER FILE IS PROVIDED FREE OF CHARGE ON AN AS-IS BASIS WITHOUT
  * WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
  * TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
  * PURPOSE.  I2O SIG DOES NOT WARRANT THAT THIS HEADER FILE WILL MEET THE
  * USER'S REQUIREMENTS OR THAT ITS OPERATION WILL BE UNINTERRUPTED OR
  * ERROR-FREE.
- * 
+ *
  * I2O SIG DISCLAIMS ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF
  * ANY PROPRIETARY RIGHTS, RELATING TO THE IMPLEMENTATION OF THE I2O
  * SPECIFICATIONS.  I2O SIG DOES NOT WARRANT OR REPRESENT THAT SUCH
  * IMPLEMENTATIONS WILL NOT INFRINGE SUCH RIGHTS.
- * 
+ *
  * THE USER OF THIS HEADER FILE SHALL HAVE NO RECOURSE TO I2O SIG FOR ANY
  * ACTUAL OR CONSEQUENTIAL DAMAGES INCLUDING, BUT NOT LIMITED TO, LOST DATA
  * OR LOST PROFITS ARISING OUT OF THE USE OR INABILITY TO USE THIS PROGRAM.
- * 
+ *
  * I2O SIG grants the user of this header file a license to copy, distribute,
  * and modify it, for any purpose, under the following terms.  Any copying,
  * distribution, or modification of this header file must not delete or alter
  * the copyright notice of I2O SIG or any of these Terms and Conditions.
- * 
+ *
  * Any distribution of this header file must not include a charge for the
  * header file (unless such charges are strictly for the physical acts of
  * copying or transferring copies).  However, distribution of a product in
  * which this header file is embedded may include a charge so long as any
  * such charge does not include any charge for the header file itself.
- * 
+ *
  * Any modification of this header file constitutes a derivative work based
- * on this header file.  Any distribution of such derivative work: (1) must
+ * on this header file.	 Any distribution of such derivative work: (1) must
  * include prominent notices that the header file has been changed from the
- * original, together with the dates of any changes; (2) automatically includes 
+ * original, together with the dates of any changes; (2) automatically includes
  * this same license to the original header file from I2O SIG, without any
  * restriction thereon from the distributing user; and (3) must include a
  * grant of license of the modified file under the same terms and conditions
  * as these Terms and Conditions.
- * 
+ *
  * The I2O SIG Web site can be found at: http://www.i2osig.org
- * 
+ *
  * The I2O SIG encourages you to deposit derivative works based on this
- * header file at the I2O SIG Web site.  Furthermore, to become a Registered
+ * header file at the I2O SIG Web site.	 Furthermore, to become a Registered
  * Developer of the I2O SIG, sign up at the Web site or call 415.750.8352
  * (United States).
  *
@@ -81,7 +81,7 @@
  ****************************************************************/
 
 #if !defined(I2O_ADPTR_HDR)
-#define	I2O_ADPTR_HDR
+#define I2O_ADPTR_HDR
 
 #if ((defined(KERNEL) || defined(_KERNEL)) && defined(__FreeBSD__))
 # if (KERN_VERSION < 3)
@@ -90,11 +90,11 @@
 #  include "dev/asr/i2omsg.h"
 # endif
 #else
-# include    "i2omsg.h"          /* Include the Base Message file */
+# include    "i2omsg.h"		 /* Include the Base Message file */
 #endif
 
 
-#define	I2OADPTR_REV 1_5_1      /* Header file revision string */
+#define I2OADPTR_REV 1_5_1	/* Header file revision string */
 
 
 /*****************************************************************************
@@ -106,18 +106,18 @@
  *
  *  1.5.d   03/06/97 - First definition for spec. draft version 1.5d.
  *  1.5.1   05/02/97 - Corrections from review cycle:
- *          1) Remove "SCSI" from function definition comment.
- *          2) Add revision string.
- *          3) Convert tabs to spaces.
- *          4) New disclaimer.
+ *	    1) Remove "SCSI" from function definition comment.
+ *	    2) Add revision string.
+ *	    3) Convert tabs to spaces.
+ *	    4) New disclaimer.
+ *
  *
- *              
  *
  *****************************************************************************/
 
 /*
     NOTES:
-    
+
     Gets, reads, receives, etc. are all even numbered functions.
     Sets, writes, sends, etc. are all odd numbered functions.
     Functions that both send and receive data can be either but an attempt is made
@@ -125,11 +125,11 @@
     Functions that do not send or receive data use odd function numbers.
 
     Some functions are synonyms like read, receive and send, write.
-    
+
     All common functions will have a code of less than 0x80.
     Unique functions to a class will start at 0x80.
     Executive Functions start at 0xA0.
-    
+
     Utility Message function codes range from 0 - 0x1f
     Base Message function codes range from 0x20 - 0xfe
     Private Message function code is 0xff.
@@ -144,54 +144,54 @@ PRAGMA_PACK_PUSH
     Bus Adapter Class specific functions
 */
 
-#define	I2O_HBA_ADAPTER_RESET               0x85
-#define	I2O_HBA_BUS_QUIESCE                 0x8b
-#define	I2O_HBA_BUS_RESET                   0x87
-#define	I2O_HBA_BUS_SCAN                    0x89
+#define I2O_HBA_ADAPTER_RESET		    0x85
+#define I2O_HBA_BUS_QUIESCE		    0x8b
+#define I2O_HBA_BUS_RESET		    0x87
+#define I2O_HBA_BUS_SCAN		    0x89
 
 
 /*
     Detailed Status Codes for HBA operations
 
     Note:
-    The 16-bit Detailed Status Code field for HBA operations is divided 
-    into two separate 8-bit fields.  The lower 8 bits are reserved.  The 
-    upper 8 bits are used to report Adapter Status information.  The 
-    definitions for these two fields, however, will be consistent with 
-    the standard reply message frame structure declaration, which treats 
+    The 16-bit Detailed Status Code field for HBA operations is divided
+    into two separate 8-bit fields.  The lower 8 bits are reserved.  The
+    upper 8 bits are used to report Adapter Status information.	 The
+    definitions for these two fields, however, will be consistent with
+    the standard reply message frame structure declaration, which treats
     this as a single 16-bit field.  In addition, the values used will be
-    consistent with the Adapter Status codes defined for the SCSI 
-    Peripheral class.  Theses codes are based on CAM-1.  In other words,
+    consistent with the Adapter Status codes defined for the SCSI
+    Peripheral class.  Theses codes are based on CAM-1.	 In other words,
     these definitions are a subset of the SCSI peripheral class codes.
     Where applicable, "SCSI" has been removed from the definition.
-*/  
-
-
-#define	I2O_HBA_DSC_MASK                        0xFF00
-
-#define	I2O_HBA_DSC_SUCCESS                     0x0000
-#define	I2O_HBA_DSC_ADAPTER_BUSY                0x0500
-#define	I2O_HBA_DSC_COMMAND_TIMEOUT             0x0B00
-#define	I2O_HBA_DSC_COMPLETE_WITH_ERROR         0x0400
-#define	I2O_HBA_DSC_FUNCTION_UNAVAILABLE        0x3A00
-#define	I2O_HBA_DSC_NO_ADAPTER                  0x1100
-#define	I2O_HBA_DSC_PARITY_ERROR_FAILURE        0x0F00
-#define	I2O_HBA_DSC_PATH_INVALID                0x0700
-#define	I2O_HBA_DSC_PROVIDE_FAILURE             0x1600
-#define	I2O_HBA_DSC_QUEUE_FROZEN                0x4000
-#define	I2O_HBA_DSC_REQUEST_ABORTED             0x0200
-#define	I2O_HBA_DSC_REQUEST_INVALID             0x0600
-#define	I2O_HBA_DSC_REQUEST_LENGTH_ERROR        0x1500
-#define	I2O_HBA_DSC_REQUEST_TERMINATED          0x1800
-#define	I2O_HBA_DSC_RESOURCE_UNAVAILABLE        0x3400
-#define	I2O_HBA_DSC_BUS_BUSY                    0x3F00
-#define	I2O_HBA_DSC_BUS_RESET                   0x0E00
-#define	I2O_HBA_DSC_ID_INVALID                  0x3900
-#define	I2O_HBA_DSC_SEQUENCE_FAILURE            0x1400
-#define	I2O_HBA_DSC_UNABLE_TO_ABORT             0x0300
-#define	I2O_HBA_DSC_UNABLE_TO_TERMINATE         0x0900
-#define	I2O_HBA_DSC_UNACKNOWLEDGED_EVENT        0x3500
-#define	I2O_HBA_DSC_UNEXPECTED_BUS_FREE         0x1300
+*/
+
+
+#define I2O_HBA_DSC_MASK			0xFF00
+
+#define I2O_HBA_DSC_SUCCESS			0x0000
+#define I2O_HBA_DSC_ADAPTER_BUSY		0x0500
+#define I2O_HBA_DSC_COMMAND_TIMEOUT		0x0B00
+#define I2O_HBA_DSC_COMPLETE_WITH_ERROR		0x0400
+#define I2O_HBA_DSC_FUNCTION_UNAVAILABLE	0x3A00
+#define I2O_HBA_DSC_NO_ADAPTER			0x1100
+#define I2O_HBA_DSC_PARITY_ERROR_FAILURE	0x0F00
+#define I2O_HBA_DSC_PATH_INVALID		0x0700
+#define I2O_HBA_DSC_PROVIDE_FAILURE		0x1600
+#define I2O_HBA_DSC_QUEUE_FROZEN		0x4000
+#define I2O_HBA_DSC_REQUEST_ABORTED		0x0200
+#define I2O_HBA_DSC_REQUEST_INVALID		0x0600
+#define I2O_HBA_DSC_REQUEST_LENGTH_ERROR	0x1500
+#define I2O_HBA_DSC_REQUEST_TERMINATED		0x1800
+#define I2O_HBA_DSC_RESOURCE_UNAVAILABLE	0x3400
+#define I2O_HBA_DSC_BUS_BUSY			0x3F00
+#define I2O_HBA_DSC_BUS_RESET			0x0E00
+#define I2O_HBA_DSC_ID_INVALID			0x3900
+#define I2O_HBA_DSC_SEQUENCE_FAILURE		0x1400
+#define I2O_HBA_DSC_UNABLE_TO_ABORT		0x0300
+#define I2O_HBA_DSC_UNABLE_TO_TERMINATE		0x0900
+#define I2O_HBA_DSC_UNACKNOWLEDGED_EVENT	0x3500
+#define I2O_HBA_DSC_UNEXPECTED_BUS_FREE		0x1300
 
 
 
@@ -202,36 +202,36 @@ PRAGMA_PACK_PUSH
 /****************************************************************************/
 
 
-#define	    I2O_HBA_CONTROLLER_INFO_GROUP_NO            0x0000
-#define	    I2O_HBA_HISTORICAL_STATS_GROUP_NO           0x0100
-#define	    I2O_HBA_SCSI_CONTROLLER_INFO_GROUP_NO       0x0200
-#define	    I2O_HBA_SCSI_BUS_PORT_INFO_GROUP_NO         0x0201
-#define	    I2O_HBA_FCA_CONTROLLER_INFO_GROUP_NO        0x0300
-#define	    I2O_HBA_FCA_PORT_INFO_GROUP_NO              0x0301
+#define	    I2O_HBA_CONTROLLER_INFO_GROUP_NO		0x0000
+#define	    I2O_HBA_HISTORICAL_STATS_GROUP_NO		0x0100
+#define	    I2O_HBA_SCSI_CONTROLLER_INFO_GROUP_NO	0x0200
+#define	    I2O_HBA_SCSI_BUS_PORT_INFO_GROUP_NO		0x0201
+#define	    I2O_HBA_FCA_CONTROLLER_INFO_GROUP_NO	0x0300
+#define	    I2O_HBA_FCA_PORT_INFO_GROUP_NO		0x0301
 
 
 /* - 0000h - HBA Controller Information Parameter Group */
 
 /* Bus Type */
 
-#define	    I2O_HBA_BUS_TYPE_GENERIC        0x00
-#define	    I2O_HBA_BUS_TYPE_SCSI           0x01
-#define	    I2O_HBA_BUS_TYPE_FCA            0x10
+#define	    I2O_HBA_BUS_TYPE_GENERIC	    0x00
+#define	    I2O_HBA_BUS_TYPE_SCSI	    0x01
+#define	    I2O_HBA_BUS_TYPE_FCA	    0x10
 
 
 typedef struct _I2O_HBA_CONTROLLER_INFO_SCALAR {
-    U8          BusType;
-    U8          BusState;
-    U16         Reserved2;
-    U8          BusName[12];
+    U8		BusType;
+    U8		BusState;
+    U16		Reserved2;
+    U8		BusName[12];
 } I2O_HBA_CONTROLLER_INFO_SCALAR, *PI2O_HBA_CONTROLLER_INFO_SCALAR;
 
 
 /* - 0100h - HBA Historical Stats Parameter Group */
 
 typedef struct _I2O_HBA_HIST_STATS_SCALAR {
-    U32         TimeLastPoweredUp;
-    U32         TimeLastReset;
+    U32		TimeLastPoweredUp;
+    U32		TimeLastReset;
 } I2O_HBA_HIST_STATS_SCALAR, *PI2O_HBA_HIST_STATS_SCALAR;
 
 
@@ -239,22 +239,22 @@ typedef struct _I2O_HBA_HIST_STATS_SCALAR {
 
 /* SCSI Type */
 
-#define	I2O_SCSI_TYPE_UNKNOWN               0x00
-#define	I2O_SCSI_TYPE_SCSI_1                0x01
-#define	I2O_SCSI_TYPE_SCSI_2                0x02
-#define	I2O_SCSI_TYPE_SCSI_3                0x03
+#define I2O_SCSI_TYPE_UNKNOWN		    0x00
+#define I2O_SCSI_TYPE_SCSI_1		    0x01
+#define I2O_SCSI_TYPE_SCSI_2		    0x02
+#define I2O_SCSI_TYPE_SCSI_3		    0x03
 
 /* Protection Management */
 
-#define	    I2O_SCSI_PORT_PROT_OTHER        0x00
-#define	    I2O_SCSI_PORT_PROT_UNKNOWN      0x01
+#define	    I2O_SCSI_PORT_PROT_OTHER	    0x00
+#define	    I2O_SCSI_PORT_PROT_UNKNOWN	    0x01
 #define	    I2O_SCSI_PORT_PROT_UNPROTECTED  0x02
 #define	    I2O_SCSI_PORT_PROT_PROTECTED    0x03
-#define	    I2O_SCSI_PORT_PROT_SCC          0x04
+#define	    I2O_SCSI_PORT_PROT_SCC	    0x04
 
 /* Settings */
 
-#define	    I2O_SCSI_PORT_PARITY_FLAG       0x01
+#define	    I2O_SCSI_PORT_PARITY_FLAG	    0x01
 #define	    I2O_SCSI_PORT_PARITY_DISABLED   0x00
 #define	    I2O_SCSI_PORT_PARITY_ENABLED    0x01
 
@@ -262,51 +262,51 @@ typedef struct _I2O_HBA_HIST_STATS_SCALAR {
 #define	    I2O_SCSI_PORT_SCAN_LOW_TO_HIGH  0x00
 #define	    I2O_SCSI_PORT_SCAN_HIGH_TO_LOW  0x02
 
-#define	    I2O_SCSI_PORT_IID_FLAG          0x04
-#define	    I2O_SCSI_PORT_IID_DEFAULT       0x00
-#define	    I2O_SCSI_PORT_IID_SPECIFIED     0x04
+#define	    I2O_SCSI_PORT_IID_FLAG	    0x04
+#define	    I2O_SCSI_PORT_IID_DEFAULT	    0x00
+#define	    I2O_SCSI_PORT_IID_SPECIFIED	    0x04
 
-#define	    I2O_SCSI_PORT_SCAM_FLAG         0x08
-#define	    I2O_SCSI_PORT_SCAM_DISABLED     0x00
-#define	    I2O_SCSI_PORT_SCAM_ENABLED      0x08
+#define	    I2O_SCSI_PORT_SCAM_FLAG	    0x08
+#define	    I2O_SCSI_PORT_SCAM_DISABLED	    0x00
+#define	    I2O_SCSI_PORT_SCAM_ENABLED	    0x08
 
-#define	    I2O_SCSI_PORT_TYPE_FLAG         0x80
-#define	    I2O_SCSI_PORT_TYPE_PARALLEL     0x00
-#define	    I2O_SCSI_PORT_TYPE_SERIAL       0x80
+#define	    I2O_SCSI_PORT_TYPE_FLAG	    0x80
+#define	    I2O_SCSI_PORT_TYPE_PARALLEL	    0x00
+#define	    I2O_SCSI_PORT_TYPE_SERIAL	    0x80
 
 typedef struct _I2O_HBA_SCSI_CONTROLLER_INFO_SCALAR {
-    U8          SCSIType;
-    U8          ProtectionManagement;
-    U8          Settings;
-    U8          Reserved1;
-    U32         InitiatorID;
-    U64         ScanLun0Only;
-    U16         DisableDevice;
-    U8          MaxOffset;
-    U8          MaxDataWidth;
-    U64         MaxSyncRate;
+    U8		SCSIType;
+    U8		ProtectionManagement;
+    U8		Settings;
+    U8		Reserved1;
+    U32		InitiatorID;
+    U64		ScanLun0Only;
+    U16		DisableDevice;
+    U8		MaxOffset;
+    U8		MaxDataWidth;
+    U64		MaxSyncRate;
 } I2O_HBA_SCSI_CONTROLLER_INFO_SCALAR, *PI2O_HBA_SCSI_CONTROLLER_INFO_SCALAR;
 
 
 /* - 0201h - HBA SCSI Bus Port Information Parameter Group */
 
 /*  NOTE:   Refer to the SCSI Peripheral Class Bus Port Information Parameter
-            Group field definitions for HBA SCSI Bus Port field definitions.
+	    Group field definitions for HBA SCSI Bus Port field definitions.
  */
 
 typedef struct _I2O_HBA_SCSI_BUS_PORT_INFO_SCALAR {
-    U8          PhysicalInterface;
-    U8          ElectricalInterface;
-    U8          Isochronous;
-    U8          ConnectorType;
-    U8          ConnectorGender;
-    U8          Reserved1;
-    U16         Reserved2;
-    U32         MaxNumberDevices;
-    U32         DeviceIdBegin;
-    U32         DeviceIdEnd;
-    U8          LunBegin[8];
-    U8          LunEnd[8];
+    U8		PhysicalInterface;
+    U8		ElectricalInterface;
+    U8		Isochronous;
+    U8		ConnectorType;
+    U8		ConnectorGender;
+    U8		Reserved1;
+    U16		Reserved2;
+    U32		MaxNumberDevices;
+    U32		DeviceIdBegin;
+    U32		DeviceIdEnd;
+    U8		LunBegin[8];
+    U8		LunEnd[8];
 } I2O_HBA_SCSI_BUS_PORT_INFO_SCALAR, *PI2O_HBA_SCSI_BUS_PORT_INFO_SCALAR;
 
 
@@ -314,20 +314,20 @@ typedef struct _I2O_HBA_SCSI_BUS_PORT_INFO_SCALAR {
 
 /* SCSI Type */
 
-#define	I2O_FCA_TYPE_UNKNOWN                0x00
-#define	I2O_FCA_TYPE_FCAL                   0x01
+#define I2O_FCA_TYPE_UNKNOWN		    0x00
+#define I2O_FCA_TYPE_FCAL		    0x01
 
 typedef struct _I2O_HBA_FCA_CONTROLLER_INFO_SCALAR {
-    U8          FcaType;
-    U8          Reserved1;
-    U16         Reserved2;
+    U8		FcaType;
+    U8		Reserved1;
+    U16		Reserved2;
 } I2O_HBA_FCA_CONTROLLER_INFO_SCALAR, *PI2O_HBA_FCA_CONTROLLER_INFO_SCALAR;
 
 
 /* - 0301h - HBA FCA Port Information Parameters Group defines */
 
 typedef struct _I2O_HBA_FCA_PORT_INFO_SCALAR {
-    U32         Reserved4;
+    U32		Reserved4;
 } I2O_HBA_FCA_PORT_INFO_SCALAR, *PI2O_HBA_FCA_PORT_INFO_SCALAR;
 
 
@@ -352,7 +352,7 @@ typedef struct _I2O_HBA_REPLY_MESSAGE_FRAME {
 /* I2O HBA Adapter Reset Message Frame */
 
 typedef struct _I2O_HBA_ADAPTER_RESET_MESSAGE {
-    I2O_MESSAGE_FRAME       StdMessageFrame;
+    I2O_MESSAGE_FRAME	    StdMessageFrame;
     I2O_TRANSACTION_CONTEXT TransactionContext;
 } I2O_HBA_ADAPTER_RESET_MESSAGE, *PI2O_HBA_ADAPTER_RESET_MESSAGE;
 
@@ -361,15 +361,15 @@ typedef struct _I2O_HBA_ADAPTER_RESET_MESSAGE {
 
 /* I2O HBA Bus Quiesce Message Frame */
 
-typedef U32     I2O_HBQ_FLAGS;
+typedef U32	I2O_HBQ_FLAGS;
 
-#define	I2O_HBQ_FLAG_NORMAL             0x0000
-#define	I2O_HBQ_FLAG_QUIESCE            0x0001
+#define I2O_HBQ_FLAG_NORMAL		0x0000
+#define I2O_HBQ_FLAG_QUIESCE		0x0001
 
 typedef struct _I2O_HBA_BUS_QUIESCE_MESSAGE {
-    I2O_MESSAGE_FRAME       StdMessageFrame;
+    I2O_MESSAGE_FRAME	    StdMessageFrame;
     I2O_TRANSACTION_CONTEXT TransactionContext;
-    I2O_HBQ_FLAGS           Flags;
+    I2O_HBQ_FLAGS	    Flags;
 } I2O_HBA_BUS_QUIESCE_MESSAGE, *PI2O_HBA_BUS_QUIESCE_MESSAGE;
 
 
@@ -378,7 +378,7 @@ typedef struct _I2O_HBA_BUS_QUIESCE_MESSAGE {
 /* I2O HBA Bus Reset Message Frame */
 
 typedef struct _I2O_HBA_BUS_RESET_MESSAGE {
-    I2O_MESSAGE_FRAME       StdMessageFrame;
+    I2O_MESSAGE_FRAME	    StdMessageFrame;
     I2O_TRANSACTION_CONTEXT TransactionContext;
 } I2O_HBA_BUS_RESET_MESSAGE, *PI2O_HBA_BUS_RESET_MESSAGE;
 
@@ -390,7 +390,7 @@ typedef struct _I2O_HBA_BUS_RESET_MESSAGE {
 /* NOTE: SCSI-2 8-bit scalar LUN goes into offset 1 of Lun arrays */
 
 typedef struct _I2O_HBA_BUS_SCAN_MESSAGE {
-    I2O_MESSAGE_FRAME       StdMessageFrame;
+    I2O_MESSAGE_FRAME	    StdMessageFrame;
     I2O_TRANSACTION_CONTEXT TransactionContext;
 } I2O_HBA_BUS_SCAN_MESSAGE, *PI2O_HBA_BUS_SCAN_MESSAGE;
 
@@ -399,6 +399,6 @@ PRAGMA_PACK_POP
 
 PRAGMA_ALIGN_POP
 
-#endif      /* I2O_ADPTR_HDR */
+#endif	    /* I2O_ADPTR_HDR */