diff options
author | Mike Pritchard <mpp@FreeBSD.org> | 2004-06-26 17:19:44 +0000 |
---|---|---|
committer | Mike Pritchard <mpp@FreeBSD.org> | 2004-06-26 17:19:44 +0000 |
commit | 3c7c6c12cf3572010db867324f1de5042dffbc58 (patch) | |
tree | db66017fc8b1966b1f71e4765057e18eca78d738 /sys/conf/NOTES | |
parent | 11c40a39b67aba8a72760639162bc0367cd71a1a (diff) | |
download | src-3c7c6c12cf3572010db867324f1de5042dffbc58.tar.gz src-3c7c6c12cf3572010db867324f1de5042dffbc58.zip |
Spelling fixes.
Notes
Notes:
svn path=/head/; revision=131146
Diffstat (limited to 'sys/conf/NOTES')
-rw-r--r-- | sys/conf/NOTES | 28 |
1 files changed, 14 insertions, 14 deletions
diff --git a/sys/conf/NOTES b/sys/conf/NOTES index d31f4ffdc1b0..cd9de5d8662b 100644 --- a/sys/conf/NOTES +++ b/sys/conf/NOTES @@ -95,7 +95,7 @@ options DFLDSIZ=(1024UL*1024*1024) # # BLKDEV_IOSIZE sets the default block size used in user block -# device I/O. Note that this value will be overriden by the label +# device I/O. Note that this value will be overridden by the label # when specifying a block device from a label with a non-0 # partition blocksize. The default is PAGE_SIZE. # @@ -184,7 +184,7 @@ options MUTEX_NOINLINE # WITNESS enables the witness code which detects deadlocks and cycles # during locking operations. # WITNESS_DDB causes the witness code to drop into the kernel debugger if -# a lock heirarchy violation occurs or if locks are held when going to +# a lock hierarchy violation occurs or if locks are held when going to # sleep. # WITNESS_SKIPSPIN disables the witness checks on spin mutexes. options MUTEX_DEBUG @@ -328,7 +328,7 @@ options DIAGNOSTIC # # REGRESSION causes optional kernel interfaces necessary only for regression -# testing to be enabled. These interfaces may consitute security risks +# testing to be enabled. These interfaces may constitute security risks # when enabled, as they permit processes to easily modify aspects of the # run-time environment to reproduce unlikely or unusual (possibly normally # impossible) scenarios. @@ -408,7 +408,7 @@ options ALTQ_RED # Random Early Drop options ALTQ_RIO # RED In/Out options ALTQ_HFSC # Hierarchical Packet Scheduler options ALTQ_CDNR # Traffic conditioner -options ALTQ_PRIQ # Prioirity Queueing +options ALTQ_PRIQ # Priority Queueing options ALTQ_NOPCC # Required for SMP build options ALTQ_DEBUG @@ -589,7 +589,7 @@ device stf #6to4 IPv6 over IPv4 encapsulation # packets without touching the ttl). This can be useful to hide firewalls # from traceroute and similar tools. # -# PFIL_HOOKS enables an abtraction layer which is meant to be used in +# PFIL_HOOKS enables an abstraction layer which is meant to be used in # network code where filtering is required. See pfil(9). This option is # required by the IPFILTER option and the PF device. # @@ -657,7 +657,7 @@ options DUMMYNET options BRIDGE # Zero copy sockets support. This enables "zero copy" for sending and -# receving data via a socket. The send side works for any type of NIC, +# receiving data via a socket. The send side works for any type of NIC, # the receive side only works for NICs that support MTUs greater than the # page size of your architecture and that support header splitting. See # zero_copy(9) for more details. @@ -932,8 +932,8 @@ hint.sa.1.target="6" # # The cd driver drives SCSI Read Only Direct Access ("cd") devices. # -# The ses driver drives SCSI Envinronment Services ("ses") and -# SAF-TE ("SCSI Accessable Fault-Tolerant Enclosure") devices. +# The ses driver drives SCSI Environment Services ("ses") and +# SAF-TE ("SCSI Accessible Fault-Tolerant Enclosure") devices. # # The pt driver drives SCSI Processor devices. # @@ -1554,7 +1554,7 @@ options PUC_FASTINTR # # MII bus support is required for some PCI 10/100 ethernet NICs, # namely those which use MII-compliant transceivers or implement -# tranceiver control interfaces that operate like an MII. Adding +# transceiver control interfaces that operate like an MII. Adding # "device miibus0" to the kernel config pulls in support for # the generic miibus API and all of the PHY drivers, including a # generic one for PHYs that aren't specifically handled by an @@ -1644,7 +1644,7 @@ device miibus # Compaq Netelligent 10/100 cards and the built-in ethernet controllers # in several Compaq Prosignia, Proliant and Deskpro systems. It also # supports several Olicom 10Mbps and 10/100 boards. -# tx: SMC 9432 TX, BTX and FTX cards. (SMC EtherPower II serie) +# tx: SMC 9432 TX, BTX and FTX cards. (SMC EtherPower II series) # txp: Support for 3Com 3cR990 cards with the "Typhoon" chipset # vr: Support for various fast ethernet adapters based on the VIA # Technologies VT3043 `Rhine I' and VT86C100A `Rhine II' chips, @@ -1800,7 +1800,7 @@ options LIBMBPOOL #needed by patm, iatm # Gravis UltraSound ISA PnP/non-PnP # Crystal Semiconductor CS461x/428x PCI # Neomagic 256AV (ac97) -# Most of the more common ISA/PnP sb/mss/ess compatable cards. +# Most of the more common ISA/PnP sb/mss/ess compatible cards. device pcm @@ -1919,7 +1919,7 @@ device nmdm # options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_PAL # or # options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_NTSC -# Specifes the default video capture mode. +# Specifies the default video capture mode. # This is required for Dual Crystal (28&35Mhz) boards where PAL is used # to prevent hangs during initialisation. eg VideoLogic Captivator PCI. # @@ -2224,12 +2224,12 @@ options UKBD_DFLT_KEYMAP # specify the built-in keymap makeoptions UKBD_DFLT_KEYMAP=it.iso # options for uplcom: -options UPLCOM_INTR_INTERVAL=100 # interrpt pipe interval +options UPLCOM_INTR_INTERVAL=100 # interrupt pipe interval # in milliseconds # options for uvscom: options UVSCOM_DEFAULT_OPKTSIZE=8 # default output packet size -options UVSCOM_INTR_INTERVAL=100 # interrpt pipe interval +options UVSCOM_INTR_INTERVAL=100 # interrupt pipe interval # in milliseconds ##################################################################### |