Started cleaning up FAQ directory for 2.0.

Move old FAQ to FreeBSD-1.1.FAQ
Started new FAQ
Move old Systems to Systems-1.1.FAQ
Started new Systems
moved slip-dialup to Slip.FAQ (Needs to be reworked for 2.0)

More work to come...

1 files changed, 4 insertions, 262 deletions

diff --git a/share/FAQ/Systems.FAQ b/share/FAQ/Systems.FAQ
index c2e3e2ed5177..7139b90304f6 100644
--- a/share/FAQ/Systems.FAQ
+++ b/share/FAQ/Systems.FAQ
@@ -1,266 +1,8 @@
-                                  Systems FAQ
-                                  For FreeBSD
- Last Modified: $Id: Systems.FAQ,v 1.1 1994/06/11 17:59:19 gclarkii Exp $
-
-This FAQ is a list of systems that people have sent to the FAQ maintnance
-person for inclusion.  If you have a system you would like to be included
-please send it to FreeBSD-FAQ@freefall.cdrom.com.  
-
-Disclaimer:  This document is composed of systems that people have sent to
-the FAQ maintnance person.  It is the not to be taken as an endorsement
-for any system or manufacture.
-
-
-1.
-
-386DX/20 real AMI, ISA
-Oak SVGA (no X)
-8MB
-Adaptec 1542B, WD1007V ESDI
-Wren VI and Miniscribe 660MB 20Mbit/sec ESDI
-WD 8013EBT
-
-2.
-
-486DX/25 clone, AMI BIOS, ISA
-Orchid PCIII gas plasma (yes, VGA16)
-8MB
-Adaptec 1542B
-Micropolis 1684 SCSI 
-SMC 8013EEWC
-
-3.
-
- ??? OPTI chipset AMI BIOS 486/50 ISA
-ISA ET4000 w/ X11 (not so slow)
-16 Mb - 48 Mb swap
-ISA aha1542 B
-ISA no-name IDE w/ floppies
-FUJITSU M2623S-512 405MB  set to SCSI2
-SEAGATE ST3283N    237MB  SCSI2 
-SANYO   CRD-400I   SCSI2 cdromcdrom
-
-4.
-
-Lipizzan LDO-1 486DX-33 motherboard
-Orchid ProIIs (1M) video
-8 MB memory
-Generic 2S/1P/2FD/IDE controller:
-Maxtor 7213 AT
-WDC AC2420H
-PAS-16 + Sony CDU31A CD drive (Fusion 16 package).
-	*** The CD drive does not currently work with FreeBSD.
-
-5.
-
-Asus VL/ISA-486SV2 (ISA-VLB as you can see)
-Orchid Fahrenheit 1280+ VLB (yes)
-20MB
-Some no-name IDE VLB controller
-Conner CP30504 (I think....the 540MB IDE one)
-Zoltrix 14.4/14.4 Fax/Modem on tty01
-Intel 486DX2/66 CPU + fan
-Conner CP30104 (120MB....for DOS)
-
-6.
-
-AIR 486El (running with AMD486/40)
-ATI Graphics Ultra Pro running XFree862.1
-16M
-Adaptec 1742
-Micropolis 2217
-Wangtec 6130FS DAT drive (Some problems)
-
-7.
-
-Compudyne 486 DX2/66
-ATI Local Bus GUP w/ 2megs
-16 Megs Memory
-504 IDE Hard Drive
-Colorado 250 meg QIC-80 tape drive
-
-8.
-
-American Megatrends Enterprise III, 486DX2-66
-ATI VLB Mach 32 (with X)
-16 meg
-Adaptec 1742 EISA SCSI with floppy
-Toshiba 5030 SCSI-II
-Toshiba 5157 SCSI-II
-SMC Elite16T ISA Ethernet (ISA)
-
-9.
-
-American Megatrends Enterprise III, 486DX
-ATI VLB Mach 32 (with X)
-32 meg
-Adaptec 1742 EISA SCSI with floppy
-Maxtor P0-12S SCSI
-Digital DSP5200S SCSI-II
-Pro Audio Spectrum 16
-Wonder Board, 4 serial (16550), 3 parallel, each on a different interrupt
-
-10.
-
-NoName 486DX/33, Intel Chipset, EISA-Bus
-ATI Graphics Ultra Pro EISA,
-17"  Nanao (Eizo) F550-i Monitor
-Running the Mach32 X-Server XFree86-2.1.1 with fonts created from source.
-16 MB RAM (planning to add another 8 MB).
-AHA1742A
-Conner CP3100
-Fujitsu 520 MB
-Archive 525MB streamer tape.
-Gravis UltraSound - works for mod-files.
-
-11.
-
-ASUS SP3 PCI Board with i486 DX/2 66 MHz
-ISA ET4000 (I already tested a S3 805 PCI card successfully)
-Adaptec 1542B
-Toshiba XM3301TA CD-Rom
-CDC Harddisk, 572 MB (I don't know the exact specs)
-
-12.
-
-Mylex MAE486/33 EISA Motherboard
-16MB memory
-Actix GE32+ S3 801 gfx
-Adaptec 1742A controller
-Seagate ST3160 drive
-Seagate ST5120 drive
-Archive Viper 150MB tape
-Roland SCC-1 sound card
-Gravis Ultrasound card
-Longshine SMC/Novell compatable ethernet card
-
-13.
-
-Model:	DECpc LPv 466d2
-Config: Local (Motherboard) S3 801 gfx, IDE controller, PS/2 mouse, 12MB memory
-
-14.
-
-
-??? 486/DX266 EISA/VLB Motherboard
-16MB memory
-#9 GXE L12 VLB 3MB graphics card
-Bt445S VLB disk controller
-DEC DSP3105S drive
-MAXSTOR P-17S drive
-Tandberg 525MB tape drive
-Toshiba XM3301 CDROM
-Soundblaster 2.0
-Longshine SMC/Novell compatable ethernet card
-
-15.
-
-M407 PC chips with 33Mhz 486.
-Had to disable external cache due to DMA problems. Board uses write-through
-cache unless a second chip is added to allow write-back.write-back.
-Orchid ProDesigner II (yes)
-16Mb
-IDE
-Maxtor 7213 AT and Maxtor 7120 AT
-2 BICC Isolans (Lance based cards)
-
-16.
-
-Gigabyte EISA/VLB motherboard with SIS chipset, AMI bios, 32 MB ram
-Adaptec 1742 SCSI 2 controller with floppy controller enabled
-Spea/V7 Mirage - S3/805 based localbus graphics card with 1 MB d-ram
-no name wd8013 compatible ethernet card
-Gravis Ultrasound card with 1 MB ram
-2 Fujitsu 400 MB and 1 Seagate 500 MB SCSI 2 harddisks
-5 1/4 + 3 1/2 inch floppy drives
-Tandberg TDC3600 60 MB + Tandberg TDC3800 525 MB Streamer (these don't work
-quite properly yet)
-
-17.
-
-i486DX33, 16 Mb RAM, 256 Kb external cache, VLB board
-no-name IDE/floppy controller
-Western Digital Caviar 2340 (325 Mb)
-Kalok KL-343 (40 Mb)
-Chips & Technologies 451 SuperVGA card (800x600, 16 colours, 256Kb)
-
-18.
-
-no name EISA i486DX/33 board, 16 MB RAM
-Adaptec AHA-1540*A*  (not knowing if the current -current might cause
-  problems, my kernel is from end of march)
-Maxtor MXT-1240S, 1.2Gig very fast SCSI disk
-Seagate ST-1144A, just to boot off the beast (also has a messdos partition yet)
-Archive Viper 150 tape; has a firmware braindeadness when appending files,
-  works very well otherwise
-ELSA Winner 1000 ISA/EISA, 1MB VRAM, S3 86C928 (unfortunately, D-step chip)
-Nokia 447-B 17in monitor, running ~ 1100x800 resolution, very nice
-true `Mouse Systems' optical mouse, fine thing!
-sometimes a Toshiba XM-3301 CDROM, rather old, but solid & reliable
-
-19.
-
-older south-east Asia made notebook, i386SX/16, 5 MB RAM (where the 384 k hole
-  can be re-mapped, so all the 5 MB are useable)
-Seagate ST-9145AG, 120 MB 2.5in IDE disk, very low power consumption, but
-  rather slow transfer rate, only about 350 K/s, so paging is a mess
-640x480 LCD, ~ 16 gray tones distinguishable, Cirrus Logic CL-GD610/620
-  chipset; runs generic VGA-Mono and VGA-16 XFree86[tm] servers; needs
-  some hacks in rc.local to give full contrast when running with the
-  pcvt display driver (due to their different default attribute handling)
-
-
-20.
-
-Data General Dasher 386sx/16, 8 MB RAM
-Adaptec AHA-1542B
-Seagate ST-3655N, 525 MB SCSI disk
-Conner CP-3044, 40 MB IDE disk
-has been working with a Western Digital WD-1007V ESDI controller (on
-  secondary wdc address), and a Micropolis 1664-7 330 MB ESDI disk -
-  but this beast was terribly slow, loud (& unreliable) and therefore
-  had to go
-ET-3000 based 512 K VGA, slow (wrt. XFree86), but reliable
-3Com 3C503 Ethernet adaptor, suffers from the `do not nfs mount with
-  too large packets' problem, but works well otherwise
-`Mouse Systems' optical mouse
-Toshiba XM-3301 CDROM
-already ran with a Micropolis 1664-3 330 MB SCSI disk (same drive as
-  above, but different interface)
-already ran with an IBM 2Gig SCSI disk (don't remember the type)
-
-
-21.
-
-Mylex MNA 486/33 EISA Motherboard
-16Mb of Memory
-1.2 GB Toshiba 538 SCSI disk
-400Mb IBM SCSI disk
-150/250Mb Tandberg SCSI tape drive
-Toshiba 3401 SCSI CD-ROM
-Tseng 4000 Video Controller
-Logitech Bus Mouse
-Mediavision Pro Audio Stereo Sound Card
-Adaptech 1742A SCSI controller
-WD8013EBT Ethernet Card
-
-22.
-
-386DX-40 w/Cyrix math co-processor
-ET-4000 running X
-16MB
-IDE
-540MB Western Digital
-WD8003EP
-
-
-
-
-
-
-
-
 
+                               Systems FAQ
+                             for FreeBSD 2.0
 
+This FAQ lists systems (and componets) known to work with FreeBSD 2.0.  None
+of these lists should be seen as a recomandation for a manufacture.