Add a sample script file so people have some idea of what to pass to Load.

1 files changed, 51 insertions, 0 deletions

diff --git a/release/sysinstall/install.cfg b/release/sysinstall/install.cfg
new file mode 100644
index 000000000000..832d403516b7
--- /dev/null
+++ b/release/sysinstall/install.cfg
@@ -0,0 +1,51 @@
+# This is the installation configuration file for my test machine,
+# crate.cdrom.com.
+# It is included here merely as a sort-of-documented example.
+
+# Turn on extra debugging.
+debug=yes
+
+# My host specific data
+hostname=crate.cdrom.com
+domainname=cdrom.com
+nameserver=204.216.27.3
+defaultrouter=204.216.27.228
+ipaddr=204.216.27.230
+netmask=255.255.255.240
+
+# Which installation device to use - ftp is pointed directly at my local
+# machine and the installation device is my WD8013 ethernet interface.
+ftp=ftp://time.cdrom.com/pub
+netDev=ed0
+mediaSetFTP
+
+# Select which distributions we want.
+distSetUser
+
+# Now set the parameters for the partition editor on wd0.  Set to use all
+# remaining free space (could also be "all" or "existing" to use all the
+# disk or an existing FreeBSD slice). 
+disk=wd0
+diskSpace=free
+bootManager=booteasy
+diskPartitionEditor
+
+# It's bogus that we have to re-enter the label editor for each partition
+# we want to create, but it was easier to do it this way (from a programming
+# standpoint, not a user standpoint!).  This assumes that slice 1 is a DOS
+# partition and mounts it as /dos, which is the case on my laptop.
+# We can also create a root partition of 20MB in size on the same pass since
+# it's in a different slice (s2).  All sizes are expressed in 512 byte blocks!
+wd0s2=partition 40960 /
+diskLabelEditor
+
+# Now make a 20MB swap partition in the second slice.
+wd0s2=swap 40960 none
+diskLabelEditor
+
+# Size of 0 means allocate the rest of the space to /usr
+wd0s2=partition 0 /usr
+diskLabelEditor
+
+# OK, everything is set.  Do it!
+installCommit