Add entry for SMC 2632W card.

Submitted by: lots of people, most recently by Mike Buchanon

Also, Tried to clean up the comments about IRQs to match the new world
order.

1 files changed, 26 insertions, 11 deletions

diff --git a/etc/defaults/pccard.conf b/etc/defaults/pccard.conf
index ef20ff1dbfe4..0a512468e5c0 100644
--- a/etc/defaults/pccard.conf
+++ b/etc/defaults/pccard.conf
@@ -1,28 +1,37 @@
-# Default PCCARD configuration file
-#
-# Removing all IRQ conflicts from this file can't be done because of some
-# IRQ-selfish PC-cards.  So if you want to use some of these cards in
-# your machine, you will be forced to modify their IRQ parameters from
-# the following list.
 #
-# IRQ == 0 means "allocate free IRQ from IRQ pool"
-# IRQ == 16 means "do not use IRQ (e.g. PIO mode)"
+# Default PCCARD configuration file
 #
 # $FreeBSD$
 #
-# Send new entries for this file to imp@freebsd.org.  He's volunteered
-# to act as coordinator for this file.
+# Please send new entries for this file to imp@freebsd.org.  He likes to
+# review them before they are committed to make sure they are correct for
+# the style of the file.  Please attempt to use "auto" for the config
+# number whereever possible.  Do not commit IRQs in the "config" lines.
+# Make sure that you use tabs rather than multiple spaces for new entires
+# like the old ones.  <tab>keyword<tab>arguments.
+#
+# Removing all IRQ conflicts from this file can't be done because of some
+# IRQ-selfish PC-cards.  So if you want to use some of those cards in
+# your machine, you may need to modify the IRQ list below.  Please put
+# such overrides in /etc/pccard.conf.  You can also place override
+# card entries in /etc/pccard.conf, since the first match is the one that
+# pccardd will use to configure the card.
 #
 
 # Generally available IO ports
 io	0x240-0x360
 # on i386 IRQs can be any of 3 4 5 7 9 10 11 12 14 15
 # on pc98 IRQs can be any of 3 5 6 9 10 11 12 13
-# but *MUST* *NOT* be used by anything else.
+# but *MUST* *NOT* be used by anything else, unless you are using current
+# and a PCI cardbus bridge that allows sharing.  Even then, the rules
+# for interrupt sharing can be tricky.
 # Generally available IRQs (Built-in sound-card owners remove 5)
 irq	3 5 10 11 15
 # Available memory slots
 memory	0xd4000  96k
+# Debug level, so you know how to get more info for maintainers.  Put it
+# in /etc/pccard.conf
+#debuglevel 4
 
 # Include user configration file
 # This allow you to override or add configurations.
@@ -1794,6 +1803,12 @@ card "PLANEX" "GeoWave/GW-NS110"
 	insert	/etc/pccard_ether $device start
 	remove	/etc/pccard_ether $device stop
 
+# SMC's SMC2632W.
+card "SMC" "SMC2632W"
+	config	auto "wi" ? 0x10000
+	insert	/etc/pccard_ether $device start
+	remove	/etc/pccard_ether $device stop
+
 # TDK LAK-CD011WL
 card "TDK" "LAK-CD011WL for Wireless LAN"
 	config	auto "wi" ?