/*-
* Copyright (c) 1990 The Regents of the University of California.
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* William Jolitz.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: @(#)icu.h 5.6 (Berkeley) 5/9/91
* $Id: icu.h,v 1.15 1997/07/22 20:12:05 fsmp Exp $
*/
/*
* AT/386 Interrupt Control constants
* W. Jolitz 8/89
*/
#ifndef _I386_ISA_ICU_H_
#define _I386_ISA_ICU_H_
#ifndef LOCORE
#ifdef APIC_IO
/*
#define MP_SAFE
* Note:
* Most of the SMP equivilants of the icu macros are coded
* elsewhere in an MP-safe fashion.
* In particular note that the 'imen' variable is opaque.
* DO NOT access imen directly, use INTREN()/INTRDIS().
*/
void INTREN __P((u_int));
void INTRDIS __P((u_int));
#define INTRMASK(msk,s) (msk |= (s))
#define INTRUNMASK(msk,s) (msk &= ~(s))
#else /* APIC_IO */
/*
* Interrupt "level" mechanism variables, masks, and macros
*/
extern unsigned imen; /* interrupt mask enable */
#define INTREN(s) (imen &= ~(s), SET_ICUS())
#define INTRDIS(s) (imen |= (s), SET_ICUS())
#define INTRMASK(msk,s) (msk |= (s))
#define INTRUNMASK(msk,s) (msk &= ~(s))
#if 0
#ifdef PC98
#define SET_ICUS() (outb(IO_ICU1 + 2, imen), outb(IU_ICU2 + 2, imen >> 8))
#define INTRGET() ((inb(IO_ICU2) << 8 | inb(IO_ICU1)) & 0xffff)
#else /* IBM-PC */
#define SET_ICUS() (outb(IO_ICU1 + 1, imen), outb(IU_ICU2 + 1, imen >> 8))
#define INTRGET() ((inb(IO_ICU2) << 8 | inb(IO_ICU1)) & 0xffff)
#endif /* PC98 */
#else
/*
* XXX - IO_ICU* are defined in isa.h, not icu.h, and nothing much bothers to
* include isa.h, while too many things include icu.h.
*/
#ifdef PC98
#define SET_ICUS() (outb(0x02, imen), outb(0x0a, imen >> 8))
/* XXX is this correct? */
#define INTRGET() ((inb(0x0a) << 8 | inb(0x02)) & 0xffff)
#else
#define SET_ICUS() (outb(0x21, imen), outb(0xa1, imen >> 8))
#define INTRGET() ((inb(0xa1) << 8 | inb(0x21)) & 0xffff)
#endif
#endif
#endif /* APIC_IO */
#endif /* LOCORE */
#ifdef APIC_IO
/*
* Note: The APIC uses different values for IRQxxx.
* Unfortunately many drivers use the 8259 values as indexes
* into tables, etc. The APIC equivilants are kept as APIC_IRQxxx.
* The 8259 versions have to be used in SMP for legacy operation
* of the drivers.
*/
#endif /* APIC_IO */
/*
* Interrupt enable bits - in normal order of priority (which we change)
*/
#define IRQ0 0x0001 /* highest priority - timer */
#define IRQ1 0x0002
#define IRQ_SLAVE 0x0004
#define IRQ8 0x0100
#define IRQ9 0x0200
#define IRQ2 IRQ9
#define IRQ10 0x0400
#define IRQ11 0x0800
#define IRQ12 0x1000
#define IRQ13 0x2000
#define IRQ14 0x4000
#define IRQ15 0x8000
#define IRQ3 0x0008 /* this is highest after rotation */
#define IRQ4 0x0010
#define IRQ5 0x0020
#define IRQ6 0x0040
#define IRQ7 0x0080 /* lowest - parallel printer */
#ifdef PC98
#undef IRQ2
#define IRQ2 0x0004
#undef IRQ_SLAVE
#define IRQ_SLAVE 0x0080
#endif
/*
* Interrupt Control offset into Interrupt descriptor table (IDT)
*/
#define ICU_OFFSET 32 /* 0-31 are processor exceptions */
#ifdef APIC_IO
/* 32-47: ISA IRQ0-IRQ15, 48-55: IO APIC IRQ16-IRQ23 */
#define ICU_LEN 24
#else
#define ICU_LEN 16 /* 32-47 are ISA interrupts */
#endif /* APIC_IO */
#endif /* !_I386_ISA_ICU_H_ */
