|
|
/*-
* Copyright (c) 1991 The Regents of the University of California.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: @(#)comreg.h 7.2 (Berkeley) 5/9/91
* $Id: sioreg.h,v 1.11 1998/09/26 14:00:29 peter Exp $
*/
/* 16 bit baud rate divisor (lower byte in dca_data, upper in dca_ier) */
#define COMBRD(x) (1843200 / (16*(x)))
#ifdef PC98
#define COMBRD_RSA(x) (14745600 / (16*(x)))
#endif
/* interrupt enable register */
#define IER_ERXRDY 0x1
#define IER_ETXRDY 0x2
#define IER_ERLS 0x4
#define IER_EMSC 0x8
/* interrupt identification register */
#define IIR_IMASK 0xf
#define IIR_RXTOUT 0xc
#define IIR_RLS 0x6
#define IIR_RXRDY 0x4
#define IIR_TXRDY 0x2
#define IIR_NOPEND 0x1
#define IIR_MLSC 0x0
#define IIR_FIFO_MASK 0xc0 /* set if FIFOs are enabled */
/* fifo control register */
#define FIFO_ENABLE 0x01
#define FIFO_RCV_RST 0x02
#define FIFO_XMT_RST 0x04
#define FIFO_DMA_MODE 0x08
#define FIFO_RX_LOW 0x00
#define FIFO_RX_MEDL 0x40
#define FIFO_RX_MEDH 0x80
#define FIFO_RX_HIGH 0xc0
/* character format control register */
#define CFCR_DLAB 0x80
#define CFCR_SBREAK 0x40
#define CFCR_PZERO 0x30
#define CFCR_PONE 0x20
#define CFCR_PEVEN 0x10
#define CFCR_PODD 0x00
#define CFCR_PENAB 0x08
#define CFCR_STOPB 0x04
#define CFCR_8BITS 0x03
#define CFCR_7BITS 0x02
#define CFCR_6BITS 0x01
#define CFCR_5BITS 0x00
/* modem control register */
#define MCR_LOOPBACK 0x10
#define MCR_IENABLE 0x08
#define MCR_DRS 0x04
#define MCR_RTS 0x02
#define MCR_DTR 0x01
/* line status register */
#define LSR_RCV_FIFO 0x80
#define LSR_TSRE 0x40
#define LSR_TXRDY 0x20
#define LSR_BI 0x10
#define LSR_FE 0x08
#define LSR_PE 0x04
#define LSR_OE 0x02
#define LSR_RXRDY 0x01
#define LSR_RCV_MASK 0x1f
/* modem status register */
#define MSR_DCD 0x80
#define MSR_RI 0x40
#define MSR_DSR 0x20
#define MSR_CTS 0x10
#define MSR_DDCD 0x08
#define MSR_TERI 0x04
#define MSR_DDSR 0x02
#define MSR_DCTS 0x01
#ifdef PC98
/* Hardware extension mode register for RSB-2000/3000. */
#define EMR_EXBUFF 0x04
#define EMR_CTSFLW 0x08
#define EMR_DSRFLW 0x10
#define EMR_RTSFLW 0x20
#define EMR_DTRFLW 0x40
#define EMR_EFMODE 0x80
#endif
/* speed to initialize to during chip tests */
#define SIO_TEST_SPEED 9600
/* default serial console speed if not set with sysctl or probed from boot */
#ifndef CONSPEED
#define CONSPEED 9600
#endif
|
