/*-
* Copyright (c) 2004 M. Warner Losh
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*-
* Copyright 1992 by the University of Guelph
*
* Permission to use, copy and modify this
* software and its documentation for any purpose and without
* fee is hereby granted, provided that the above copyright
* notice appear in all copies and that both that copyright
* notice and this permission notice appear in supporting
* documentation.
* University of Guelph makes no representations about the suitability of
* this software for any purpose. It is provided "as is"
* without express or implied warranty.
*/
/*
* Driver for the Logitech and ATI Inport Bus mice for use with 386bsd and
* the X386 port, courtesy of
* Rick Macklem, rick@snowhite.cis.uoguelph.ca
* Caveats: The driver currently uses spltty(), but doesn't use any
* generic tty code. It could use splmse() (that only masks off the
* bus mouse interrupt, but that would require hacking in i386/isa/icu.s.
* (This may be worth the effort, since the Logitech generates 30/60
* interrupts/sec continuously while it is open.)
* NB: The ATI has NOT been tested yet!
*/
/*
* Modification history:
* Sep 6, 1994 -- Lars Fredriksen(fredriks@mcs.com)
* improved probe based on input from Logitech.
*
* Oct 19, 1992 -- E. Stark (stark@cs.sunysb.edu)
* fixes to make it work with Microsoft InPort busmouse
*
* Jan, 1993 -- E. Stark (stark@cs.sunysb.edu)
* added patches for new "select" interface
*
* May 4, 1993 -- E. Stark (stark@cs.sunysb.edu)
* changed position of some spl()'s in mseread
*
* October 8, 1993 -- E. Stark (stark@cs.sunysb.edu)
* limit maximum negative x/y value to -127 to work around XFree problem
* that causes spurious button pushes.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/conf.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/poll.h>
#include <sys/selinfo.h>
#include <sys/uio.h>
#include <sys/mouse.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/rman.h>
#include <isa/isavar.h>
#include <dev/mse/msevar.h>
static int mse_cbus_probe(device_t dev);
static int mse_cbus_attach(device_t dev);
static int mse_cbus_detach(device_t dev);
static device_method_t mse_methods[] = {
DEVMETHOD(device_probe, mse_cbus_probe),
DEVMETHOD(device_attach, mse_cbus_attach),
DEVMETHOD(device_detach, mse_cbus_detach),
{ 0, 0 }
};
static driver_t mse_driver = {
"mse",
mse_methods,
sizeof(mse_softc_t),
};
DRIVER_MODULE(mse, isa, mse_driver, mse_devclass, 0, 0);
static struct isa_pnp_id mse_ids[] = {
#if 0
{ 0x001fa3b8, "PC-98 bus mouse" }, /* NEC1F00 */
#endif
{ 0 }
};
/*
* PC-9801 Bus mouse definitions
*/
#define MODE MSE_PORTD
#define HC MSE_PORTD
#define INT MSE_PORTD
#define XL 0x00
#define XH 0x20
#define YL 0x40
#define YH 0x60
#define INT_ENABLE 0x8
#define INT_DISABLE 0x9
#define HC_NO_CLEAR 0xe
#define HC_CLEAR 0xf
static bus_addr_t mse_port[] = {0, 2, 4, 6};
static int mse_probe98m(device_t dev, mse_softc_t *sc);
static void mse_disable98m(bus_space_tag_t t, bus_space_handle_t h);
static void mse_get98m(bus_space_tag_t t, bus_space_handle_t h,
int *dx, int *dy, int *but);
static void mse_enable98m(bus_space_tag_t t, bus_space_handle_t h);
static struct mse_types mse_types[] = {
{ MSE_98BUSMOUSE,
mse_probe98m, mse_enable98m, mse_disable98m, mse_get98m,
{ 2, MOUSE_IF_BUS, MOUSE_MOUSE, MOUSE_MODEL_GENERIC, 0, },
{ MOUSE_PROTO_BUS, -1, -1, 0, 0, MOUSE_MSC_PACKETSIZE,
{ MOUSE_MSC_SYNCMASK, MOUSE_MSC_SYNC, }, }, },
{ 0, },
};
static int
mse_cbus_probe(device_t dev)
{
mse_softc_t *sc;
int error;
int rid;
int i;
/* check PnP IDs */
error = ISA_PNP_PROBE(device_get_parent(dev), dev, mse_ids);
if (error == ENXIO)
return error;
sc = device_get_softc(dev);
rid = 0;
sc->sc_port = isa_alloc_resourcev(dev, SYS_RES_IOPORT, &rid, mse_port,
MSE_IOSIZE, RF_ACTIVE);
if (sc->sc_port == NULL)
return ENXIO;
if (isa_load_resourcev(sc->sc_port, mse_port, MSE_IOSIZE)) {
bus_release_resource(dev, SYS_RES_IOPORT, rid, sc->sc_port);
return ENXIO;
}
sc->sc_iot = rman_get_bustag(sc->sc_port);
sc->sc_ioh = rman_get_bushandle(sc->sc_port);
/*
* Check for each mouse type in the table.
*/
i = 0;
while (mse_types[i].m_type) {
if ((*mse_types[i].m_probe)(dev, sc)) {
sc->sc_mousetype = mse_types[i].m_type;
sc->sc_enablemouse = mse_types[i].m_enable;
sc->sc_disablemouse = mse_types[i].m_disable;
sc->sc_getmouse = mse_types[i].m_get;
sc->hw = mse_types[i].m_hw;
sc->mode = mse_types[i].m_mode;
bus_release_resource(dev, SYS_RES_IOPORT, rid,
sc->sc_port);
device_set_desc(dev, "Bus/InPort Mouse");
return 0;
}
i++;
}
bus_release_resource(dev, SYS_RES_IOPORT, rid, sc->sc_port);
return ENXIO;
}
static int
mse_cbus_attach(device_t dev)
{
mse_softc_t *sc;
int rid;
sc = device_get_softc(dev);
rid = 0;
sc->sc_port = isa_alloc_resourcev(dev, SYS_RES_IOPORT, &rid, mse_port,
MSE_IOSIZE, RF_ACTIVE);
if (sc->sc_port == NULL)
return ENXIO;
if (isa_load_resourcev(sc->sc_port, mse_port, MSE_IOSIZE)) {
bus_release_resource(dev, SYS_RES_IOPORT, rid, sc->sc_port);
return ENXIO;
}
sc->sc_iot = rman_get_bustag(sc->sc_port);
sc->sc_ioh = rman_get_bushandle(sc->sc_port);
return (mse_common_attach(dev));
}
static int
mse_cbus_detach(device_t dev)
{
mse_softc_t *sc;
int rid;
sc = device_get_softc(dev);
if (sc->sc_flags & MSESC_OPEN)
return EBUSY;
rid = 0;
BUS_TEARDOWN_INTR(device_get_parent(dev), dev, sc->sc_intr, sc->sc_ih);
bus_release_resource(dev, SYS_RES_IRQ, rid, sc->sc_intr);
bus_release_resource(dev, SYS_RES_IOPORT, rid, sc->sc_port);
destroy_dev(sc->sc_dev);
destroy_dev(sc->sc_ndev);
return 0;
}
/*
* Routines for the PC98 bus mouse.
*/
/*
* Test for a PC98 bus mouse and return 1 if it is.
* (do not enable interrupts)
*/
static int
mse_probe98m(device_t dev, mse_softc_t *sc)
{
/* mode set */
bus_space_write_1(sc->sc_iot, sc->sc_ioh, MODE, 0x93);
/* initialize */
/* INT disable */
bus_space_write_1(sc->sc_iot, sc->sc_ioh, INT, INT_DISABLE);
/* HC = 0 */
bus_space_write_1(sc->sc_iot, sc->sc_ioh, HC, HC_NO_CLEAR);
/* HC = 1 */
bus_space_write_1(sc->sc_iot, sc->sc_ioh, HC, HC_CLEAR);
return (1);
}
/*
* Initialize PC98 bus mouse and enable interrupts.
*/
static void
mse_enable98m(bus_space_tag_t tag, bus_space_handle_t handle)
{
bus_space_write_1(tag, handle, INT, INT_ENABLE); /* INT enable */
bus_space_write_1(tag, handle, HC, HC_NO_CLEAR); /* HC = 0 */
bus_space_write_1(tag, handle, HC, HC_CLEAR); /* HC = 1 */
}
/*
* Disable interrupts for PC98 Bus mouse.
*/
static void
mse_disable98m(bus_space_tag_t tag, bus_space_handle_t handle)
{
bus_space_write_1(tag, handle, INT, INT_DISABLE); /* INT disable */
bus_space_write_1(tag, handle, HC, HC_NO_CLEAR); /* HC = 0 */
bus_space_write_1(tag, handle, HC, HC_CLEAR); /* HC = 1 */
}
/*
* Get current dx, dy and up/down button state.
*/
static void
mse_get98m(bus_space_tag_t tag, bus_space_handle_t handle, int *dx, int *dy,
int *but)
{
register char x, y;
bus_space_write_1(tag, handle, INT, INT_DISABLE); /* INT disable */
bus_space_write_1(tag, handle, HC, HC_CLEAR); /* HC = 1 */
/* X low */
bus_space_write_1(tag, handle, MSE_PORTC, 0x90 | XL);
x = bus_space_read_1(tag, handle, MSE_PORTA) & 0x0f;
/* X high */
bus_space_write_1(tag, handle, MSE_PORTC, 0x90 | XH);
x |= ((bus_space_read_1(tag, handle, MSE_PORTA) & 0x0f) << 4);
/* Y low */
bus_space_write_1(tag, handle, MSE_PORTC, 0x90 | YL);
y = (bus_space_read_1(tag, handle, MSE_PORTA) & 0x0f);
/* Y high */
bus_space_write_1(tag, handle, MSE_PORTC, 0x90 | YH);
y |= ((bus_space_read_1(tag, handle, MSE_PORTA) & 0x0f) << 4);
*but = (bus_space_read_1(tag, handle, MSE_PORTA) >> 5) & 7;
*dx = x;
*dy = y;
bus_space_write_1(tag, handle, HC, HC_NO_CLEAR); /* HC = 0 */
bus_space_write_1(tag, handle, INT, INT_ENABLE); /* INT enable */
}
