path: root/sys/dev/mpt/mpt_cam.c

/*-
 * FreeBSD/CAM specific routines for LSI '909 FC  adapters.
 * FreeBSD Version.
 *
 * Copyright (c)  2000, 2001 by Greg Ansley
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice immediately at the beginning of the file, without modification,
 *    this list of conditions, and the following disclaimer.
 * 2. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */
/*-
 * Copyright (c) 2002, 2006 by Matthew Jacob
 * All rights reserved.
 * 
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 *    substantially similar to the "NO WARRANTY" disclaimer below
 *    ("Disclaimer") and any redistribution must be conditioned upon including
 *    a substantially similar Disclaimer requirement for further binary
 *    redistribution.
 * 3. Neither the names of the above listed copyright holders nor the names
 *    of any contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 * 
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
 * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * Support from Chris Ellsworth in order to make SAS adapters work
 * is gratefully acknowledged.
 *
 * Support from LSI-Logic has also gone a great deal toward making this a
 * workable subsystem and is gratefully acknowledged.
 */
/*-
 * Copyright (c) 2004, Avid Technology, Inc. and its contributors.
 * Copyright (c) 2005, WHEEL Sp. z o.o.
 * Copyright (c) 2004, 2005 Justin T. Gibbs
 * All rights reserved.
 * 
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 *    substantially similar to the "NO WARRANTY" disclaimer below
 *    ("Disclaimer") and any redistribution must be conditioned upon including
 *    a substantially similar Disclaimer requirement for further binary
 *    redistribution.
 * 3. Neither the names of the above listed copyright holders nor the names
 *    of any contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 * 
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
 * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");

#include <dev/mpt/mpt.h>
#include <dev/mpt/mpt_cam.h>
#include <dev/mpt/mpt_raid.h>

#include "dev/mpt/mpilib/mpi_ioc.h" /* XXX Fix Event Handling!!! */
#include "dev/mpt/mpilib/mpi_init.h"
#include "dev/mpt/mpilib/mpi_targ.h"
#include "dev/mpt/mpilib/mpi_fc.h"

#include <sys/callout.h>
#include <sys/kthread.h>

static void mpt_poll(struct cam_sim *);
static timeout_t mpt_timeout;
static void mpt_action(struct cam_sim *, union ccb *);
static int
mpt_get_spi_settings(struct mpt_softc *, struct ccb_trans_settings *);
static void mpt_setwidth(struct mpt_softc *, int, int);
static void mpt_setsync(struct mpt_softc *, int, int, int);
static int mpt_update_spi_config(struct mpt_softc *, int);
static void mpt_calc_geometry(struct ccb_calc_geometry *ccg, int extended);

static mpt_reply_handler_t mpt_scsi_reply_handler;
static mpt_reply_handler_t mpt_scsi_tmf_reply_handler;
static mpt_reply_handler_t mpt_fc_els_reply_handler;
static int mpt_scsi_reply_frame_handler(struct mpt_softc *, request_t *,
					MSG_DEFAULT_REPLY *);
static int mpt_bus_reset(struct mpt_softc *, target_id_t, lun_id_t, int);
static int mpt_fc_reset_link(struct mpt_softc *, int);

static int mpt_spawn_recovery_thread(struct mpt_softc *mpt);
static void mpt_terminate_recovery_thread(struct mpt_softc *mpt);
static void mpt_recovery_thread(void *arg);
static void mpt_recover_commands(struct mpt_softc *mpt);

static int mpt_scsi_send_tmf(struct mpt_softc *, u_int, u_int, u_int,
    u_int, u_int, u_int, int);

static void mpt_fc_post_els(struct mpt_softc *mpt, request_t *, int);
static void mpt_post_target_command(struct mpt_softc *, request_t *, int);
static int mpt_add_els_buffers(struct mpt_softc *mpt);
static int mpt_add_target_commands(struct mpt_softc *mpt);
static int mpt_enable_lun(struct mpt_softc *, target_id_t, lun_id_t);
static int mpt_disable_lun(struct mpt_softc *, target_id_t, lun_id_t);
static void mpt_target_start_io(struct mpt_softc *, union ccb *);
static cam_status mpt_abort_target_ccb(struct mpt_softc *, union ccb *);
static int mpt_abort_target_cmd(struct mpt_softc *, request_t *);
static void mpt_scsi_tgt_status(struct mpt_softc *, union ccb *, request_t *,
    uint8_t, uint8_t const *);
static void
mpt_scsi_tgt_tsk_mgmt(struct mpt_softc *, request_t *, mpt_task_mgmt_t,
    tgt_resource_t *, int);
static void mpt_tgt_dump_tgt_state(struct mpt_softc *, request_t *);
static void mpt_tgt_dump_req_state(struct mpt_softc *, request_t *);
static mpt_reply_handler_t mpt_scsi_tgt_reply_handler;

static uint32_t scsi_io_handler_id = MPT_HANDLER_ID_NONE;
static uint32_t scsi_tmf_handler_id = MPT_HANDLER_ID_NONE;
static uint32_t fc_els_handler_id = MPT_HANDLER_ID_NONE;

static mpt_probe_handler_t	mpt_cam_probe;
static mpt_attach_handler_t	mpt_cam_attach;
static mpt_enable_handler_t	mpt_cam_enable;
static mpt_event_handler_t	mpt_cam_event;
static mpt_reset_handler_t	mpt_cam_ioc_reset;
static mpt_detach_handler_t	mpt_cam_detach;

static struct mpt_personality mpt_cam_personality =
{
	.name		= "mpt_cam",
	.probe		= mpt_cam_probe,
	.attach		= mpt_cam_attach,
	.enable		= mpt_cam_enable,
	.event		= mpt_cam_event,
	.reset		= mpt_cam_ioc_reset,
	.detach		= mpt_cam_detach,
};

DECLARE_MPT_PERSONALITY(mpt_cam, SI_ORDER_SECOND);

int
mpt_cam_probe(struct mpt_softc *mpt)
{
	/*
	 * Only attach to nodes that support the initiator or target
	 * role or have RAID physical devices that need CAM pass-thru support.
	 */
	if ((mpt->mpt_proto_flags & MPI_PORTFACTS_PROTOCOL_INITIATOR) != 0
	 || (mpt->mpt_proto_flags & MPI_PORTFACTS_PROTOCOL_TARGET) != 0
	 || (mpt->ioc_page2 != NULL && mpt->ioc_page2->MaxPhysDisks != 0)) {
		return (0);
	}
	return (ENODEV);
}

int
mpt_cam_attach(struct mpt_softc *mpt)
{
	struct cam_devq *devq;
	mpt_handler_t	 handler;
	int		 maxq;
	int		 error;

	TAILQ_INIT(&mpt->request_timeout_list);
	maxq = (mpt->mpt_global_credits < MPT_MAX_REQUESTS(mpt))?
	    mpt->mpt_global_credits : MPT_MAX_REQUESTS(mpt);

	handler.reply_handler = mpt_scsi_reply_handler;
	error = mpt_register_handler(mpt, MPT_HANDLER_REPLY, handler,
				     &scsi_io_handler_id);
	if (error != 0) {
		goto cleanup0;
	}

	handler.reply_handler = mpt_scsi_tmf_reply_handler;
	error = mpt_register_handler(mpt, MPT_HANDLER_REPLY, handler,
				     &scsi_tmf_handler_id);
	if (error != 0) {
		goto cleanup0;
	}

	/*
	 * If we're fibre channel and could support target mode, we register
	 * an ELS reply handler and give it resources.
	 */
	if (mpt->is_fc && (mpt->role & MPT_ROLE_TARGET) != 0) {
		handler.reply_handler = mpt_fc_els_reply_handler;
		error = mpt_register_handler(mpt, MPT_HANDLER_REPLY, handler,
		    &fc_els_handler_id);
		if (error != 0) {
			goto cleanup0;
		}
		if (mpt_add_els_buffers(mpt) == FALSE) {
			error = ENOMEM;
			goto cleanup0;
		}
		maxq -= mpt->els_cmds_allocated;
	}

	/*
	 * If we support target mode, we register a reply handler for it,
	 * but don't add resources until we actually enable target mode.
	 */
	if ((mpt->role & MPT_ROLE_TARGET) != 0) {
		handler.reply_handler = mpt_scsi_tgt_reply_handler;
		error = mpt_register_handler(mpt, MPT_HANDLER_REPLY, handler,
		    &mpt->scsi_tgt_handler_id);
		if (error != 0) {
			goto cleanup0;
		}
	}

	/*
	 * We keep one request reserved for timeout TMF requests.
	 */
	mpt->tmf_req = mpt_get_request(mpt, FALSE);
	if (mpt->tmf_req == NULL) {
		mpt_prt(mpt, "Unable to allocate dedicated TMF request!\n");
		error = ENOMEM;
		goto cleanup0;
	}

	/*
	 * Mark the request as free even though not on the free list.
	 * There is only one TMF request allowed to be outstanding at
	 * a time and the TMF routines perform their own allocation
	 * tracking using the standard state flags.
	 */
	mpt->tmf_req->state = REQ_STATE_FREE;
	maxq--;

	if (mpt_spawn_recovery_thread(mpt) != 0) {
		mpt_prt(mpt, "Unable to spawn recovery thread!\n");
		error = ENOMEM;
		goto cleanup0;
	}

	/*
	 * The rest of this is CAM foo, for which we need to drop our lock
	 */
	MPTLOCK_2_CAMLOCK(mpt);

	/*
	 * Create the device queue for our SIM(s).
	 */
	devq = cam_simq_alloc(maxq);
	if (devq == NULL) {
		mpt_prt(mpt, "Unable to allocate CAM SIMQ!\n");
		error = ENOMEM;
		goto cleanup;
	}

	/*
	 * Construct our SIM entry.
	 */
	mpt->sim = cam_sim_alloc(mpt_action, mpt_poll, "mpt", mpt,
	    mpt->unit, 1, maxq, devq);
	if (mpt->sim == NULL) {
		mpt_prt(mpt, "Unable to allocate CAM SIM!\n");
		cam_simq_free(devq);
		error = ENOMEM;
		goto cleanup;
	}

	/*
	 * Register exactly this bus.
	 */
	if (xpt_bus_register(mpt->sim, 0) != CAM_SUCCESS) {
		mpt_prt(mpt, "Bus registration Failed!\n");
		error = ENOMEM;
		goto cleanup;
	}

	if (xpt_create_path(&mpt->path, NULL, cam_sim_path(mpt->sim),
	    CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
		mpt_prt(mpt, "Unable to allocate Path!\n");
		error = ENOMEM;
		goto cleanup;
	}

	/*
	 * Only register a second bus for RAID physical
	 * devices if the controller supports RAID.
	 */
	if (mpt->ioc_page2 == NULL || mpt->ioc_page2->MaxPhysDisks == 0) {
		CAMLOCK_2_MPTLOCK(mpt);
		return (0);
	}

	/*
	 * Create a "bus" to export all hidden disks to CAM.
	 */
	mpt->phydisk_sim = cam_sim_alloc(mpt_action, mpt_poll, "mpt", mpt,
	    mpt->unit, 1, maxq, devq);
	if (mpt->phydisk_sim == NULL) {
		mpt_prt(mpt, "Unable to allocate Physical Disk CAM SIM!\n");
		error = ENOMEM;
		goto cleanup;
	}

	/*
	 * Register this bus.
	 */
	if (xpt_bus_register(mpt->phydisk_sim, 1) != CAM_SUCCESS) {
		mpt_prt(mpt, "Physical Disk Bus registration Failed!\n");
		error = ENOMEM;
		goto cleanup;
	}

	if (xpt_create_path(&mpt->phydisk_path, NULL,
	    cam_sim_path(mpt->phydisk_sim),
	    CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
		mpt_prt(mpt, "Unable to allocate Physical Disk Path!\n");
		error = ENOMEM;
		goto cleanup;
	}
	CAMLOCK_2_MPTLOCK(mpt);
	return (0);

cleanup:
	CAMLOCK_2_MPTLOCK(mpt);
cleanup0:
	mpt_cam_detach(mpt);
	return (error);
}

/*
 * Read FC configuration information
 */
static int
mpt_read_config_info_fc(struct mpt_softc *mpt)
{
	char *topology = NULL;
	int rv;

	rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_FC_PORT, 0,
	    0, &mpt->mpt_fcport_page0.Header, FALSE, 5000);
	if (rv) {
		return (-1);
	}
	mpt_lprt(mpt, MPT_PRT_DEBUG, "FC Port Page 0 Header: %x %x %x %x\n",
		 mpt->mpt_fcport_page0.Header.PageVersion,
		 mpt->mpt_fcport_page0.Header.PageLength,
		 mpt->mpt_fcport_page0.Header.PageNumber,
		 mpt->mpt_fcport_page0.Header.PageType);


	rv = mpt_read_cur_cfg_page(mpt, 0, &mpt->mpt_fcport_page0.Header,
	    sizeof(mpt->mpt_fcport_page0), FALSE, 5000);
	if (rv) {
		mpt_prt(mpt, "failed to read FC Port Page 0\n");
		return (-1);
	}

	mpt->mpt_fcport_speed = mpt->mpt_fcport_page0.CurrentSpeed;

	switch (mpt->mpt_fcport_page0.Flags &
	    MPI_FCPORTPAGE0_FLAGS_ATTACH_TYPE_MASK) {
	case MPI_FCPORTPAGE0_FLAGS_ATTACH_NO_INIT:
		mpt->mpt_fcport_speed = 0;
		topology = "<NO LOOP>";
		break;
	case MPI_FCPORTPAGE0_FLAGS_ATTACH_POINT_TO_POINT:
		topology = "N-Port";
		break;
	case MPI_FCPORTPAGE0_FLAGS_ATTACH_PRIVATE_LOOP:
		topology = "NL-Port";
		break;
	case MPI_FCPORTPAGE0_FLAGS_ATTACH_FABRIC_DIRECT:
		topology = "F-Port";
		break;
	case MPI_FCPORTPAGE0_FLAGS_ATTACH_PUBLIC_LOOP:
		topology = "FL-Port";
		break;
	default:
		mpt->mpt_fcport_speed = 0;
		topology = "?";
		break;
	}

	mpt_lprt(mpt, MPT_PRT_INFO,
	    "FC Port Page 0: Topology <%s> WWNN 0x%08x%08x WWPN 0x%08x%08x "
	    "Speed %u-Gbit\n", topology,
	    mpt->mpt_fcport_page0.WWNN.High,
	    mpt->mpt_fcport_page0.WWNN.Low,
	    mpt->mpt_fcport_page0.WWPN.High,
	    mpt->mpt_fcport_page0.WWPN.Low,
	    mpt->mpt_fcport_speed);

	return (0);
}

/*
 * Set FC configuration information.
 */
static int
mpt_set_initial_config_fc(struct mpt_softc *mpt)
{
	
	CONFIG_PAGE_FC_PORT_1 fc;
	U32 fl;
	int r, doit = 0;
	int role;

	r = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_FC_PORT, 1, 0,
	    &fc.Header, FALSE, 5000);
	if (r) {
		mpt_prt(mpt, "failed to read FC page 1 header\n");
		return (mpt_fc_reset_link(mpt, 1));
	}

	r = mpt_read_cfg_page(mpt, MPI_CONFIG_ACTION_PAGE_READ_NVRAM, 0,
	    &fc.Header, sizeof (fc), FALSE, 5000);
	if (r) {
		mpt_prt(mpt, "failed to read FC page 1\n");
		return (mpt_fc_reset_link(mpt, 1));
	}

	/*
	 * Check our flags to make sure we support the role we want.
	 */
	doit = 0;
	role = 0;
	fl = le32toh(fc.Flags);;

	if (fl & MPI_FCPORTPAGE1_FLAGS_PROT_FCP_INIT) {
		role |= MPT_ROLE_INITIATOR;
	}
	if (fl & MPI_FCPORTPAGE1_FLAGS_PROT_FCP_TARG) {
		role |= MPT_ROLE_TARGET;
	}

	fl &= ~MPI_FCPORTPAGE1_FLAGS_PROT_MASK;

	if (mpt->do_cfg_role == 0) {
		role = mpt->cfg_role;
	} else {
		mpt->do_cfg_role = 0;
	}

	if (role != mpt->cfg_role) {
		if (mpt->cfg_role & MPT_ROLE_INITIATOR) {
			if ((role & MPT_ROLE_INITIATOR) == 0) {
				mpt_prt(mpt, "adding initiator role\n");
				fl |= MPI_FCPORTPAGE1_FLAGS_PROT_FCP_INIT;
				doit++;
			} else {
				mpt_prt(mpt, "keeping initiator role\n");
			}
		} else if (role & MPT_ROLE_INITIATOR) {
			mpt_prt(mpt, "removing initiator role\n");
			doit++;
		}
		if (mpt->cfg_role & MPT_ROLE_TARGET) {
			if ((role & MPT_ROLE_TARGET) == 0) {
				mpt_prt(mpt, "adding target role\n");
				fl |= MPI_FCPORTPAGE1_FLAGS_PROT_FCP_TARG;
				doit++;
			} else {
				mpt_prt(mpt, "keeping target role\n");
			}
		} else if (role & MPT_ROLE_TARGET) {
			mpt_prt(mpt, "removing target role\n");
			doit++;
		}
		mpt->role = mpt->cfg_role;
	}

	if (fl & MPI_FCPORTPAGE1_FLAGS_PROT_FCP_TARG) {
		if ((fl & MPI_FCPORTPAGE1_FLAGS_TARGET_MODE_OXID) == 0) {
			mpt_prt(mpt, "adding OXID option\n");
			fl |= MPI_FCPORTPAGE1_FLAGS_TARGET_MODE_OXID;
			doit++;
		}
	}

	if (doit) {
		fc.Flags = htole32(fl);
		r = mpt_write_cfg_page(mpt,
		    MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM, 0, &fc.Header,
		    sizeof(fc), FALSE, 5000);
		if (r != 0) {
			mpt_prt(mpt, "failed to update NVRAM with changes\n");
			return (0);
		}
		mpt_prt(mpt, "NOTE: NVRAM changes will not take "
		    "effect until next reboot or IOC reset\n");
	}
	return (0);
}

/*
 * Read SAS configuration information. Nothing to do yet.
 */
static int
mpt_read_config_info_sas(struct mpt_softc *mpt)
{
	return (0);
}

/*
 * Set SAS configuration information. Nothing to do yet.
 */
static int
mpt_set_initial_config_sas(struct mpt_softc *mpt)
{
	return (0);
}

/*
 * Read SCSI configuration information
 */
static int
mpt_read_config_info_spi(struct mpt_softc *mpt)
{
	int rv, i;

	rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_SCSI_PORT, 0, 0,
	    &mpt->mpt_port_page0.Header, FALSE, 5000);
	if (rv) {
		return (-1);
	}
	mpt_lprt(mpt, MPT_PRT_DEBUG, "SPI Port Page 0 Header: %x %x %x %x\n",
	    mpt->mpt_port_page0.Header.PageVersion,
	    mpt->mpt_port_page0.Header.PageLength,
	    mpt->mpt_port_page0.Header.PageNumber,
	    mpt->mpt_port_page0.Header.PageType);

	rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_SCSI_PORT, 1, 0,
	    &mpt->mpt_port_page1.Header, FALSE, 5000);
	if (rv) {
		return (-1);
	}
	mpt_lprt(mpt, MPT_PRT_DEBUG, "SPI Port Page 1 Header: %x %x %x %x\n",
	    mpt->mpt_port_page1.Header.PageVersion,
	    mpt->mpt_port_page1.Header.PageLength,
	    mpt->mpt_port_page1.Header.PageNumber,
	    mpt->mpt_port_page1.Header.PageType);

	rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_SCSI_PORT, 2, 0,
	    &mpt->mpt_port_page2.Header, FALSE, 5000);
	if (rv) {
		return (-1);
	}
	mpt_lprt(mpt, MPT_PRT_DEBUG, "SPI Port Page 2 Header: %x %x %x %x\n",
	    mpt->mpt_port_page2.Header.PageVersion,
	    mpt->mpt_port_page2.Header.PageLength,
	    mpt->mpt_port_page2.Header.PageNumber,
	    mpt->mpt_port_page2.Header.PageType);

	for (i = 0; i < 16; i++) {
		rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_SCSI_DEVICE,
		    0, i, &mpt->mpt_dev_page0[i].Header, FALSE, 5000);
		if (rv) {
			return (-1);
		}
		mpt_lprt(mpt, MPT_PRT_DEBUG,
		    "SPI Target %d Device Page 0 Header: %x %x %x %x\n", i,
		    mpt->mpt_dev_page0[i].Header.PageVersion,
		    mpt->mpt_dev_page0[i].Header.PageLength,
		    mpt->mpt_dev_page0[i].Header.PageNumber,
		    mpt->mpt_dev_page0[i].Header.PageType);
		
		rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_SCSI_DEVICE,
		    1, i, &mpt->mpt_dev_page1[i].Header, FALSE, 5000);
		if (rv) {
			return (-1);
		}
		mpt_lprt(mpt, MPT_PRT_DEBUG,
		    "SPI Target %d Device Page 1 Header: %x %x %x %x\n", i,
		    mpt->mpt_dev_page1[i].Header.PageVersion,
		    mpt->mpt_dev_page1[i].Header.PageLength,
		    mpt->mpt_dev_page1[i].Header.PageNumber,
		    mpt->mpt_dev_page1[i].Header.PageType);
	}

	/*
	 * At this point, we don't *have* to fail. As long as we have
	 * valid config header information, we can (barely) lurch
	 * along.
	 */

	rv = mpt_read_cur_cfg_page(mpt, 0, &mpt->mpt_port_page0.Header,
	    sizeof(mpt->mpt_port_page0), FALSE, 5000);
	if (rv) {
		mpt_prt(mpt, "failed to read SPI Port Page 0\n");
	} else {
		mpt_lprt(mpt, MPT_PRT_DEBUG,
		    "SPI Port Page 0: Capabilities %x PhysicalInterface %x\n",
		    mpt->mpt_port_page0.Capabilities,
		    mpt->mpt_port_page0.PhysicalInterface);
	}

	rv = mpt_read_cur_cfg_page(mpt, 0, &mpt->mpt_port_page1.Header,
	    sizeof(mpt->mpt_port_page1), FALSE, 5000);
	if (rv) {
		mpt_prt(mpt, "failed to read SPI Port Page 1\n");
	} else {
		mpt_lprt(mpt, MPT_PRT_DEBUG,
		    "SPI Port Page 1: Configuration %x OnBusTimerValue %x\n",
		    mpt->mpt_port_page1.Configuration,
		    mpt->mpt_port_page1.OnBusTimerValue);
	}

	rv = mpt_read_cur_cfg_page(mpt, 0, &mpt->mpt_port_page2.Header,
	    sizeof(mpt->mpt_port_page2), FALSE, 5000);
	if (rv) {
		mpt_prt(mpt, "failed to read SPI Port Page 2\n");
	} else {
		mpt_lprt(mpt, MPT_PRT_NEGOTIATION,
		    "Port Page 2: Flags %x Settings %x\n",
		    mpt->mpt_port_page2.PortFlags,
		    mpt->mpt_port_page2.PortSettings);
		for (i = 0; i < 16; i++) {
			mpt_lprt(mpt, MPT_PRT_NEGOTIATION,
		  	    " Port Page 2 Tgt %d: timo %x SF %x Flags %x\n",
			    i, mpt->mpt_port_page2.DeviceSettings[i].Timeout,
			    mpt->mpt_port_page2.DeviceSettings[i].SyncFactor,
			    mpt->mpt_port_page2.DeviceSettings[i].DeviceFlags);
		}
	}

	for (i = 0; i < 16; i++) {
		rv = mpt_read_cur_cfg_page(mpt, i,
		    &mpt->mpt_dev_page0[i].Header, sizeof(*mpt->mpt_dev_page0),
		    FALSE, 5000);
		if (rv) {
			mpt_prt(mpt,
			    "cannot read SPI Target %d Device Page 0\n", i);
			continue;
		}
		mpt_lprt(mpt, MPT_PRT_NEGOTIATION,
		    "target %d page 0: Negotiated Params %x Information %x\n",
		    i, mpt->mpt_dev_page0[i].NegotiatedParameters,
		    mpt->mpt_dev_page0[i].Information);

		rv = mpt_read_cur_cfg_page(mpt, i,
		    &mpt->mpt_dev_page1[i].Header, sizeof(*mpt->mpt_dev_page1),
		    FALSE, 5000);
		if (rv) {
			mpt_prt(mpt,
			    "cannot read SPI Target %d Device Page 1\n", i);
			continue;
		}
		mpt_lprt(mpt, MPT_PRT_NEGOTIATION,
		    "target %d page 1: Requested Params %x Configuration %x\n",
		    i, mpt->mpt_dev_page1[i].RequestedParameters,
		    mpt->mpt_dev_page1[i].Configuration);
	}
	return (0);
}

/*
 * Validate SPI configuration information.
 *
 * In particular, validate SPI Port Page 1.
 */
static int
mpt_set_initial_config_spi(struct mpt_softc *mpt)
{
	int i, j, pp1val = ((1 << mpt->mpt_ini_id) << 16) | mpt->mpt_ini_id;
	int error;

	mpt->mpt_disc_enable = 0xff;
	mpt->mpt_tag_enable = 0;

	if (mpt->mpt_port_page1.Configuration != pp1val) {
		CONFIG_PAGE_SCSI_PORT_1 tmp;

		mpt_prt(mpt, "SPI Port Page 1 Config value bad (%x)- should "
		    "be %x\n", mpt->mpt_port_page1.Configuration, pp1val);
		tmp = mpt->mpt_port_page1;
		tmp.Configuration = pp1val;
		error = mpt_write_cur_cfg_page(mpt, 0,
		    &tmp.Header, sizeof(tmp), FALSE, 5000);
		if (error) {
			return (-1);
		}
		error = mpt_read_cur_cfg_page(mpt, 0,
		    &tmp.Header, sizeof(tmp), FALSE, 5000);
		if (error) {
			return (-1);
		}
		if (tmp.Configuration != pp1val) {
			mpt_prt(mpt,
			    "failed to reset SPI Port Page 1 Config value\n");
			return (-1);
		}
		mpt->mpt_port_page1 = tmp;
	}

	/*
	 * The purpose of this exercise is to get
	 * all targets back to async/narrow.
	 *
	 * We skip this step if the BIOS has already negotiated
	 * speeds with the targets and does not require us to
	 * do Domain Validation.
	 */
	i = mpt->mpt_port_page2.PortSettings &
	    MPI_SCSIPORTPAGE2_PORT_MASK_NEGO_MASTER_SETTINGS;
	j = mpt->mpt_port_page2.PortFlags &
	    MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK;
	if (i == MPI_SCSIPORTPAGE2_PORT_ALL_MASTER_SETTINGS /* &&
	    j == MPI_SCSIPORTPAGE2_PORT_FLAGS_OFF_DV */) {
		mpt_lprt(mpt, MPT_PRT_NEGOTIATION,
		    "honoring BIOS transfer negotiations\n");
	} else {
		for (i = 0; i < 16; i++) {
			mpt->mpt_dev_page1[i].RequestedParameters = 0;
			mpt->mpt_dev_page1[i].Configuration = 0;
			(void) mpt_update_spi_config(mpt, i);
		}
	}
	return (0);
}

int
mpt_cam_enable(struct mpt_softc *mpt)
{
	if (mpt->is_fc) {
		if (mpt_read_config_info_fc(mpt)) {
			return (EIO);
		}
		if (mpt_set_initial_config_fc(mpt)) {
			return (EIO);
		}
	} else if (mpt->is_sas) {
		if (mpt_read_config_info_sas(mpt)) {
			return (EIO);
		}
		if (mpt_set_initial_config_sas(mpt)) {
			return (EIO);
		}
	} else if (mpt->is_spi) {
		if (mpt_read_config_info_spi(mpt)) {
			return (EIO);
		}
		if (mpt_set_initial_config_spi(mpt)) {
			return (EIO);
		}
	}
	/*
	 * If we're in target mode, hang out resources now
	 * so we don't cause the world to hang talking to us.
	 */
	if (mpt->role & MPT_ROLE_TARGET) {
		/*
		 * Try to add some target command resources
		 */
		if (mpt_add_target_commands(mpt) == FALSE) {
			return (ENOMEM);
		}
	}
	return (0);
}

void
mpt_cam_detach(struct mpt_softc *mpt)
{
	mpt_handler_t handler;

	mpt_terminate_recovery_thread(mpt); 

	handler.reply_handler = mpt_scsi_reply_handler;
	mpt_deregister_handler(mpt, MPT_HANDLER_REPLY, handler,
			       scsi_io_handler_id);
	handler.reply_handler = mpt_scsi_tmf_reply_handler;
	mpt_deregister_handler(mpt, MPT_HANDLER_REPLY, handler,
			       scsi_tmf_handler_id);
	handler.reply_handler = mpt_fc_els_reply_handler;
	mpt_deregister_handler(mpt, MPT_HANDLER_REPLY, handler,
			       fc_els_handler_id);
	handler.reply_handler = mpt_scsi_tgt_reply_handler;
	mpt_deregister_handler(mpt, MPT_HANDLER_REPLY, handler,
			       mpt->scsi_tgt_handler_id);

	if (mpt->tmf_req != NULL) {
		mpt->tmf_req->state = REQ_STATE_ALLOCATED;
		mpt_free_request(mpt, mpt->tmf_req);
		mpt->tmf_req = NULL;
	}

	if (mpt->sim != NULL) {
		MPTLOCK_2_CAMLOCK(mpt);
		xpt_free_path(mpt->path);
		xpt_bus_deregister(cam_sim_path(mpt->sim));
		cam_sim_free(mpt->sim, TRUE);
		mpt->sim = NULL;
		CAMLOCK_2_MPTLOCK(mpt);
	}

	if (mpt->phydisk_sim != NULL) {
		MPTLOCK_2_CAMLOCK(mpt);
		xpt_free_path(mpt->phydisk_path);
		xpt_bus_deregister(cam_sim_path(mpt->phydisk_sim));
		cam_sim_free(mpt->phydisk_sim, TRUE);
		mpt->phydisk_sim = NULL;
		CAMLOCK_2_MPTLOCK(mpt);
	}
}

/* This routine is used after a system crash to dump core onto the swap device.
 */
static void
mpt_poll(struct cam_sim *sim)
{
	struct mpt_softc *mpt;

	mpt = (struct mpt_softc *)cam_sim_softc(sim);
	MPT_LOCK(mpt);
	mpt_intr(mpt);
	MPT_UNLOCK(mpt);
}

/*
 * Watchdog timeout routine for SCSI requests.
 */
static void
mpt_timeout(void *arg)
{
	union ccb	 *ccb;
	struct mpt_softc *mpt;
	request_t	 *req;

	ccb = (union ccb *)arg;
	mpt = ccb->ccb_h.ccb_mpt_ptr;

	MPT_LOCK(mpt);
	req = ccb->ccb_h.ccb_req_ptr;
	mpt_prt(mpt, "request %p:%u timed out for ccb %p (req->ccb %p)\n", req,
	    req->serno, ccb, req->ccb);
/* XXX: WHAT ARE WE TRYING TO DO HERE? */
	if ((req->state & REQ_STATE_QUEUED) == REQ_STATE_QUEUED) {
		TAILQ_REMOVE(&mpt->request_pending_list, req, links);
		TAILQ_INSERT_TAIL(&mpt->request_timeout_list, req, links);
		req->state |= REQ_STATE_TIMEDOUT;
		mpt_wakeup_recovery_thread(mpt);
	}
	MPT_UNLOCK(mpt);
}

/*
 * Callback routine from "bus_dmamap_load" or, in simple cases, called directly.
 *
 * Takes a list of physical segments and builds the SGL for SCSI IO command
 * and forwards the commard to the IOC after one last check that CAM has not
 * aborted the transaction.
 */
static void
mpt_execute_req_a64(void *arg, bus_dma_segment_t *dm_segs, int nseg, int error)
{
	request_t *req, *trq;
	char *mpt_off;
	union ccb *ccb;
	struct mpt_softc *mpt;
	int seg, first_lim;
	uint32_t flags, nxt_off;
	void *sglp = NULL;
	MSG_REQUEST_HEADER *hdrp;
	SGE_SIMPLE64 *se;
	SGE_CHAIN64 *ce;
	int istgt = 0;

	req = (request_t *)arg;
	ccb = req->ccb;

	mpt = ccb->ccb_h.ccb_mpt_ptr;
	req = ccb->ccb_h.ccb_req_ptr;

	hdrp = req->req_vbuf;
	mpt_off = req->req_vbuf;

	if (error == 0 && ((uint32_t)nseg) >= mpt->max_seg_cnt) {
		error = EFBIG;
	}

	if (error == 0) {
		switch (hdrp->Function) {
		case MPI_FUNCTION_SCSI_IO_REQUEST:
		case MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH:
			istgt = 0;
			sglp = &((PTR_MSG_SCSI_IO_REQUEST)hdrp)->SGL;
			break;
		case MPI_FUNCTION_TARGET_ASSIST:
			istgt = 1;
			sglp = &((PTR_MSG_TARGET_ASSIST_REQUEST)hdrp)->SGL;
			break;
		default:
			mpt_prt(mpt, "bad fct 0x%x in mpt_execute_req_a64\n",
			    hdrp->Function);
			error = EINVAL;
			break;
		}
	}

	if (error == 0 && ((uint32_t)nseg) >= mpt->max_seg_cnt) {
		error = EFBIG;
		mpt_prt(mpt, "segment count %d too large (max %u)\n",
		    nseg, mpt->max_seg_cnt);
	}

bad:
	if (error != 0) {
		if (error != EFBIG && error != ENOMEM) {
			mpt_prt(mpt, "mpt_execute_req_a64: err %d\n", error);
		}
		if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_INPROG) {
			cam_status status;
			mpt_freeze_ccb(ccb);
			if (error == EFBIG) {
				status = CAM_REQ_TOO_BIG;
			} else if (error == ENOMEM) {
				if (mpt->outofbeer == 0) {
					mpt->outofbeer = 1;
					xpt_freeze_simq(mpt->sim, 1);
					mpt_lprt(mpt, MPT_PRT_DEBUG,
					    "FREEZEQ\n");
				}
				status = CAM_REQUEUE_REQ;
			} else {
				status = CAM_REQ_CMP_ERR;
			}
			mpt_set_ccb_status(ccb, status);
		}
		if (hdrp->Function == MPI_FUNCTION_TARGET_ASSIST) {
			request_t *cmd_req =
				MPT_TAG_2_REQ(mpt, ccb->csio.tag_id);
			MPT_TGT_STATE(mpt, cmd_req)->state = TGT_STATE_IN_CAM;
			MPT_TGT_STATE(mpt, cmd_req)->ccb = NULL;
			MPT_TGT_STATE(mpt, cmd_req)->req = NULL;
		}
		ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
		KASSERT(ccb->ccb_h.status, ("zero ccb sts at %d\n", __LINE__));
		xpt_done(ccb);
		CAMLOCK_2_MPTLOCK(mpt);
		mpt_free_request(mpt, req);
		MPTLOCK_2_CAMLOCK(mpt);
		return;
	}

	/*
	 * No data to transfer?
	 * Just make a single simple SGL with zero length.
	 */

	if (mpt->verbose >= MPT_PRT_DEBUG) {
		int tidx = ((char *)sglp) - mpt_off;
		memset(&mpt_off[tidx], 0xff, MPT_REQUEST_AREA - tidx);
	}

	if (nseg == 0) {
		SGE_SIMPLE32 *se1 = (SGE_SIMPLE32 *) sglp;
		MPI_pSGE_SET_FLAGS(se1,
		    (MPI_SGE_FLAGS_LAST_ELEMENT | MPI_SGE_FLAGS_END_OF_BUFFER |
		    MPI_SGE_FLAGS_SIMPLE_ELEMENT | MPI_SGE_FLAGS_END_OF_LIST));
		goto out;
	}


	flags = MPI_SGE_FLAGS_SIMPLE_ELEMENT | MPI_SGE_FLAGS_64_BIT_ADDRESSING;
	if (istgt == 0) {
		if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT) {
			flags |= MPI_SGE_FLAGS_HOST_TO_IOC;
		}
	} else {
		if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
			flags |= MPI_SGE_FLAGS_HOST_TO_IOC;
		}
	}

	if (!(ccb->ccb_h.flags & (CAM_SG_LIST_PHYS|CAM_DATA_PHYS))) {
		bus_dmasync_op_t op;
		if (istgt == 0) {
			if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
				op = BUS_DMASYNC_PREREAD;
			} else {
				op = BUS_DMASYNC_PREWRITE;
			}
		} else {
			if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
				op = BUS_DMASYNC_PREWRITE;
			} else {
				op = BUS_DMASYNC_PREREAD;
			}
		}
		bus_dmamap_sync(mpt->buffer_dmat, req->dmap, op);
	}

	/*
	 * Okay, fill in what we can at the end of the command frame.
	 * If we have up to MPT_NSGL_FIRST, we can fit them all into
	 * the command frame.
	 *
	 * Otherwise, we fill up through MPT_NSGL_FIRST less one
	 * SIMPLE64 pointers and start doing CHAIN64 entries after
	 * that.
	 */

	if (nseg < MPT_NSGL_FIRST(mpt)) {
		first_lim = nseg;
	} else {
		/*
		 * Leave room for CHAIN element
		 */
		first_lim = MPT_NSGL_FIRST(mpt) - 1;
	}

	se = (SGE_SIMPLE64 *) sglp;
	for (seg = 0; seg < first_lim; seg++, se++, dm_segs++) {
		uint32_t tf;

		memset(se, 0, sizeof (*se));
		se->Address.Low = dm_segs->ds_addr;
		if (sizeof(bus_addr_t) > 4) {
			se->Address.High = ((uint64_t) dm_segs->ds_addr) >> 32;
		}
		MPI_pSGE_SET_LENGTH(se, dm_segs->ds_len);
		tf = flags;
		if (seg == first_lim - 1) {
			tf |= MPI_SGE_FLAGS_LAST_ELEMENT;
		}
		if (seg == nseg - 1) {
			tf |=	MPI_SGE_FLAGS_END_OF_LIST |
				MPI_SGE_FLAGS_END_OF_BUFFER;
		}
		MPI_pSGE_SET_FLAGS(se, tf);
	}

	if (seg == nseg) {
		goto out;
	}

	/*
	 * Tell the IOC where to find the first chain element.
	 */
	hdrp->ChainOffset = ((char *)se - (char *)hdrp) >> 2;
	nxt_off = MPT_RQSL(mpt);
	trq = req;

	/*
	 * Make up the rest of the data segments out of a chain element
	 * (contiained in the current request frame) which points to
	 * SIMPLE64 elements in the next request frame, possibly ending
	 * with *another* chain element (if there's more).
	 */
	while (seg < nseg) {
		int this_seg_lim;
		uint32_t tf, cur_off;
		bus_addr_t chain_list_addr;

		/*
		 * Point to the chain descriptor. Note that the chain
		 * descriptor is at the end of the *previous* list (whether
		 * chain or simple).
		 */
		ce = (SGE_CHAIN64 *) se;

		/*
		 * Before we change our current pointer, make  sure we won't
		 * overflow the request area with this frame. Note that we
		 * test against 'greater than' here as it's okay in this case
		 * to have next offset be just outside the request area.
		 */
		if ((nxt_off + MPT_RQSL(mpt)) > MPT_REQUEST_AREA) {
			nxt_off = MPT_REQUEST_AREA;
			goto next_chain;
		}

		/*
		 * Set our SGE element pointer to the beginning of the chain
		 * list and update our next chain list offset.
		 */
		se = (SGE_SIMPLE64 *) &mpt_off[nxt_off];
		cur_off = nxt_off;
		nxt_off += MPT_RQSL(mpt);

		/*
		 * Now initialized the chain descriptor.
		 */
		memset(ce, 0, sizeof (*ce));

		/*
		 * Get the physical address of the chain list.
		 */
		chain_list_addr = trq->req_pbuf;
		chain_list_addr += cur_off;
		if (sizeof (bus_addr_t) > 4) {
			ce->Address.High =
			    (uint32_t) ((uint64_t)chain_list_addr >> 32);
		}
		ce->Address.Low = (uint32_t) chain_list_addr;
		ce->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT |
			    MPI_SGE_FLAGS_64_BIT_ADDRESSING;

		/*
		 * If we have more than a frame's worth of segments left,
		 * set up the chain list to have the last element be another
		 * chain descriptor.
		 */
		if ((nseg - seg) > MPT_NSGL(mpt)) {
			this_seg_lim = seg + MPT_NSGL(mpt) - 1;
			/*
			 * The length of the chain is the length in bytes of the
			 * number of segments plus the next chain element.
			 *
			 * The next chain descriptor offset is the length,
			 * in words, of the number of segments.
			 */
			ce->Length = (this_seg_lim - seg) *
			    sizeof (SGE_SIMPLE64);
			ce->NextChainOffset = ce->Length >> 2;
			ce->Length += sizeof (SGE_CHAIN64);
		} else {
			this_seg_lim = nseg;
			ce->Length = (this_seg_lim - seg) *
			    sizeof (SGE_SIMPLE64);
		}

		/*
		 * Fill in the chain list SGE elements with our segment data.
		 *
		 * If we're the last element in this chain list, set the last
		 * element flag. If we're the completely last element period,
		 * set the end of list and end of buffer flags.
		 */
		while (seg < this_seg_lim) {
			memset(se, 0, sizeof (*se));
			se->Address.Low = dm_segs->ds_addr;
			if (sizeof (bus_addr_t) > 4) {
				se->Address.High =
				    ((uint64_t)dm_segs->ds_addr) >> 32;
			}
			MPI_pSGE_SET_LENGTH(se, dm_segs->ds_len);
			tf = flags;
			if (seg ==  this_seg_lim - 1) {
				tf |=	MPI_SGE_FLAGS_LAST_ELEMENT;
			}
			if (seg == nseg - 1) {
				tf |=	MPI_SGE_FLAGS_END_OF_LIST |
					MPI_SGE_FLAGS_END_OF_BUFFER;
			}
			MPI_pSGE_SET_FLAGS(se, tf);
			se++;
			seg++;
			dm_segs++;
		}

    next_chain:
		/*
		 * If we have more segments to do and we've used up all of
		 * the space in a request area, go allocate another one
		 * and chain to that.
		 */
		if (seg < nseg && nxt_off >= MPT_REQUEST_AREA) {
			request_t *nrq;

			CAMLOCK_2_MPTLOCK(mpt);
			nrq = mpt_get_request(mpt, FALSE);
			MPTLOCK_2_CAMLOCK(mpt);

			if (nrq == NULL) {
				error = ENOMEM;
				goto bad;
			}

			/*
			 * Append the new request area on the tail of our list.
			 */
			if ((trq = req->chain) == NULL) {
				req->chain = nrq;
			} else {
				while (trq->chain != NULL) {
					trq = trq->chain;
				}
				trq->chain = nrq;
			}
			trq = nrq;
			mpt_off = trq->req_vbuf;
			if (mpt->verbose >= MPT_PRT_DEBUG) {
				memset(mpt_off, 0xff, MPT_REQUEST_AREA);
			}
			nxt_off = 0;
		}
	}
out:

	/*
	 * Last time we need to check if this CCB needs to be aborted.
	 */
	if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_INPROG) {
		if (hdrp->Function == MPI_FUNCTION_TARGET_ASSIST) {
			request_t *cmd_req =
				MPT_TAG_2_REQ(mpt, ccb->csio.tag_id);
			MPT_TGT_STATE(mpt, cmd_req)->state = TGT_STATE_IN_CAM;
			MPT_TGT_STATE(mpt, cmd_req)->ccb = NULL;
			MPT_TGT_STATE(mpt, cmd_req)->req = NULL;
		}
		mpt_prt(mpt,
		    "mpt_execute_req_a64: I/O cancelled (status 0x%x)\n",
		    ccb->ccb_h.status & CAM_STATUS_MASK);
		if (nseg && (ccb->ccb_h.flags & CAM_SG_LIST_PHYS) == 0) {
			bus_dmamap_unload(mpt->buffer_dmat, req->dmap);
		}
		ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
		KASSERT(ccb->ccb_h.status, ("zero ccb sts at %d\n", __LINE__));
		xpt_done(ccb);
		CAMLOCK_2_MPTLOCK(mpt);
		mpt_free_request(mpt, req);
		MPTLOCK_2_CAMLOCK(mpt);
		return;
	}

	ccb->ccb_h.status |= CAM_SIM_QUEUED;
	if (ccb->ccb_h.timeout != CAM_TIME_INFINITY) {
		ccb->ccb_h.timeout_ch =
			timeout(mpt_timeout, (caddr_t)ccb,
				(ccb->ccb_h.timeout * hz) / 1000);
	} else {
		callout_handle_init(&ccb->ccb_h.timeout_ch);
	}
	if (mpt->verbose > MPT_PRT_DEBUG) {
		int nc = 0;
		mpt_print_request(req->req_vbuf);
		for (trq = req->chain; trq; trq = trq->chain) {
			printf("  Additional Chain Area %d\n", nc++);
			mpt_dump_sgl(trq->req_vbuf, 0);
		}
	}

	if (hdrp->Function == MPI_FUNCTION_TARGET_ASSIST) {
		request_t *cmd_req = MPT_TAG_2_REQ(mpt, ccb->csio.tag_id);
		mpt_tgt_state_t *tgt = MPT_TGT_STATE(mpt, cmd_req);
#ifdef	WE_TRUST_AUTO_GOOD_STATUS
		if ((ccb->ccb_h.flags & CAM_SEND_STATUS) &&
		    csio->scsi_status == SCSI_STATUS_OK && tgt->resid == 0) {
			tgt->state = TGT_STATE_MOVING_DATA_AND_STATUS;
		} else {
			tgt->state = TGT_STATE_MOVING_DATA;
		}
#else
		tgt->state = TGT_STATE_MOVING_DATA;
#endif
	}
	CAMLOCK_2_MPTLOCK(mpt);
	mpt_send_cmd(mpt, req);
	MPTLOCK_2_CAMLOCK(mpt);
}

static void
mpt_execute_req(void *arg, bus_dma_segment_t *dm_segs, int nseg, int error)
{
	request_t *req, *trq;
	char *mpt_off;
	union ccb *ccb;
	struct mpt_softc *mpt;
	int seg, first_lim;
	uint32_t flags, nxt_off;
	void *sglp = NULL;
	MSG_REQUEST_HEADER *hdrp;
	SGE_SIMPLE32 *se;
	SGE_CHAIN32 *ce;
	int istgt = 0;

	req = (request_t *)arg;
	ccb = req->ccb;

	mpt = ccb->ccb_h.ccb_mpt_ptr;
	req = ccb->ccb_h.ccb_req_ptr;

	hdrp = req->req_vbuf;
	mpt_off = req->req_vbuf;


	if (error == 0 && ((uint32_t)nseg) >= mpt->max_seg_cnt) {
		error = EFBIG;
	}

	if (error == 0) {
		switch (hdrp->Function) {
		case MPI_FUNCTION_SCSI_IO_REQUEST:
		case MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH:
			sglp = &((PTR_MSG_SCSI_IO_REQUEST)hdrp)->SGL;
			break;
		case MPI_FUNCTION_TARGET_ASSIST:
			istgt = 1;
			sglp = &((PTR_MSG_TARGET_ASSIST_REQUEST)hdrp)->SGL;
			break;
		default:
			mpt_prt(mpt, "bad fct 0x%x in mpt_execute_req\n",
			    hdrp->Function);
			error = EINVAL;
			break;
		}
	}

	if (error == 0 && ((uint32_t)nseg) >= mpt->max_seg_cnt) {
		error = EFBIG;
		mpt_prt(mpt, "segment count %d too large (max %u)\n",
		    nseg, mpt->max_seg_cnt);
	}

bad:
	if (error != 0) {
		if (error != EFBIG && error != ENOMEM) {
			mpt_prt(mpt, "mpt_execute_req: err %d\n", error);
		}
		if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_INPROG) {
			cam_status status;
			mpt_freeze_ccb(ccb);
			if (error == EFBIG) {
				status = CAM_REQ_TOO_BIG;
			} else if (error == ENOMEM) {
				if (mpt->outofbeer == 0) {
					mpt->outofbeer = 1;
					xpt_freeze_simq(mpt->sim, 1);
					mpt_lprt(mpt, MPT_PRT_DEBUG,
					    "FREEZEQ\n");
				}
				status = CAM_REQUEUE_REQ;
			} else {
				status = CAM_REQ_CMP_ERR;
			}
			mpt_set_ccb_status(ccb, status);
		}
		if (hdrp->Function == MPI_FUNCTION_TARGET_ASSIST) {
			request_t *cmd_req =
				MPT_TAG_2_REQ(mpt, ccb->csio.tag_id);
			MPT_TGT_STATE(mpt, cmd_req)->state = TGT_STATE_IN_CAM;
			MPT_TGT_STATE(mpt, cmd_req)->ccb = NULL;
			MPT_TGT_STATE(mpt, cmd_req)->req = NULL;
		}
		ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
		KASSERT(ccb->ccb_h.status, ("zero ccb sts at %d\n", __LINE__));
		xpt_done(ccb);
		CAMLOCK_2_MPTLOCK(mpt);
		mpt_free_request(mpt, req);
		MPTLOCK_2_CAMLOCK(mpt);
		return;
	}

	/*
	 * No data to transfer?
	 * Just make a single simple SGL with zero length.
	 */

	if (mpt->verbose >= MPT_PRT_DEBUG) {
		int tidx = ((char *)sglp) - mpt_off;
		memset(&mpt_off[tidx], 0xff, MPT_REQUEST_AREA - tidx);
	}

	if (nseg == 0) {
		SGE_SIMPLE32 *se1 = (SGE_SIMPLE32 *) sglp;
		MPI_pSGE_SET_FLAGS(se1,
		    (MPI_SGE_FLAGS_LAST_ELEMENT | MPI_SGE_FLAGS_END_OF_BUFFER |
		    MPI_SGE_FLAGS_SIMPLE_ELEMENT | MPI_SGE_FLAGS_END_OF_LIST));
		goto out;
	}


	flags = MPI_SGE_FLAGS_SIMPLE_ELEMENT;
	if (istgt == 0) {
		if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT) {
			flags |= MPI_SGE_FLAGS_HOST_TO_IOC;
		}
	} else {
		if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
			flags |= MPI_SGE_FLAGS_HOST_TO_IOC;
		}
	}

	if (!(ccb->ccb_h.flags & (CAM_SG_LIST_PHYS|CAM_DATA_PHYS))) {
		bus_dmasync_op_t op;
		if (istgt) {
			if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
				op = BUS_DMASYNC_PREREAD;
			} else {
				op = BUS_DMASYNC_PREWRITE;
			}
		} else {
			if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
				op = BUS_DMASYNC_PREWRITE;
			} else {
				op = BUS_DMASYNC_PREREAD;
			}
		}
		bus_dmamap_sync(mpt->buffer_dmat, req->dmap, op);
	}

	/*
	 * Okay, fill in what we can at the end of the command frame.
	 * If we have up to MPT_NSGL_FIRST, we can fit them all into
	 * the command frame.
	 *
	 * Otherwise, we fill up through MPT_NSGL_FIRST less one
	 * SIMPLE32 pointers and start doing CHAIN32 entries after
	 * that.
	 */

	if (nseg < MPT_NSGL_FIRST(mpt)) {
		first_lim = nseg;
	} else {
		/*
		 * Leave room for CHAIN element
		 */
		first_lim = MPT_NSGL_FIRST(mpt) - 1;
	}

	se = (SGE_SIMPLE32 *) sglp;
	for (seg = 0; seg < first_lim; seg++, se++, dm_segs++) {
		uint32_t tf;

		memset(se, 0,sizeof (*se));
		se->Address = dm_segs->ds_addr;



		MPI_pSGE_SET_LENGTH(se, dm_segs->ds_len);
		tf = flags;
		if (seg == first_lim - 1) {
			tf |= MPI_SGE_FLAGS_LAST_ELEMENT;
		}
		if (seg == nseg - 1) {
			tf |=	MPI_SGE_FLAGS_END_OF_LIST |
				MPI_SGE_FLAGS_END_OF_BUFFER;
		}
		MPI_pSGE_SET_FLAGS(se, tf);
	}

	if (seg == nseg) {
		goto out;
	}

	/*
	 * Tell the IOC where to find the first chain element.
	 */
	hdrp->ChainOffset = ((char *)se - (char *)hdrp) >> 2;
	nxt_off = MPT_RQSL(mpt);
	trq = req;

	/*
	 * Make up the rest of the data segments out of a chain element
	 * (contiained in the current request frame) which points to
	 * SIMPLE32 elements in the next request frame, possibly ending
	 * with *another* chain element (if there's more).
	 */
	while (seg < nseg) {
		int this_seg_lim;
		uint32_t tf, cur_off;
		bus_addr_t chain_list_addr;

		/*
		 * Point to the chain descriptor. Note that the chain
		 * descriptor is at the end of the *previous* list (whether
		 * chain or simple).
		 */
		ce = (SGE_CHAIN32 *) se;

		/*
		 * Before we change our current pointer, make  sure we won't
		 * overflow the request area with this frame. Note that we
		 * test against 'greater than' here as it's okay in this case
		 * to have next offset be just outside the request area.
		 */
		if ((nxt_off + MPT_RQSL(mpt)) > MPT_REQUEST_AREA) {
			nxt_off = MPT_REQUEST_AREA;
			goto next_chain;
		}

		/*
		 * Set our SGE element pointer to the beginning of the chain
		 * list and update our next chain list offset.
		 */
		se = (SGE_SIMPLE32 *) &mpt_off[nxt_off];
		cur_off = nxt_off;
		nxt_off += MPT_RQSL(mpt);

		/*
		 * Now initialized the chain descriptor.
		 */
		memset(ce, 0, sizeof (*ce));

		/*
		 * Get the physical address of the chain list.
		 */
		chain_list_addr = trq->req_pbuf;
		chain_list_addr += cur_off;



		ce->Address = chain_list_addr;
		ce->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT;


		/*
		 * If we have more than a frame's worth of segments left,
		 * set up the chain list to have the last element be another
		 * chain descriptor.
		 */
		if ((nseg - seg) > MPT_NSGL(mpt)) {
			this_seg_lim = seg + MPT_NSGL(mpt) - 1;
			/*
			 * The length of the chain is the length in bytes of the
			 * number of segments plus the next chain element.
			 *
			 * The next chain descriptor offset is the length,
			 * in words, of the number of segments.
			 */
			ce->Length = (this_seg_lim - seg) *
			    sizeof (SGE_SIMPLE32);
			ce->NextChainOffset = ce->Length >> 2;
			ce->Length += sizeof (SGE_CHAIN32);
		} else {
			this_seg_lim = nseg;
			ce->Length = (this_seg_lim - seg) *
			    sizeof (SGE_SIMPLE32);
		}

		/*
		 * Fill in the chain list SGE elements with our segment data.
		 *
		 * If we're the last element in this chain list, set the last
		 * element flag. If we're the completely last element period,
		 * set the end of list and end of buffer flags.
		 */
		while (seg < this_seg_lim) {
			memset(se, 0, sizeof (*se));
			se->Address = dm_segs->ds_addr;




			MPI_pSGE_SET_LENGTH(se, dm_segs->ds_len);
			tf = flags;
			if (seg ==  this_seg_lim - 1) {
				tf |=	MPI_SGE_FLAGS_LAST_ELEMENT;
			}
			if (seg == nseg - 1) {
				tf |=	MPI_SGE_FLAGS_END_OF_LIST |
					MPI_SGE_FLAGS_END_OF_BUFFER;
			}
			MPI_pSGE_SET_FLAGS(se, tf);
			se++;
			seg++;
			dm_segs++;
		}

    next_chain:
		/*
		 * If we have more segments to do and we've used up all of
		 * the space in a request area, go allocate another one
		 * and chain to that.
		 */
		if (seg < nseg && nxt_off >= MPT_REQUEST_AREA) {
			request_t *nrq;

			CAMLOCK_2_MPTLOCK(mpt);
			nrq = mpt_get_request(mpt, FALSE);
			MPTLOCK_2_CAMLOCK(mpt);

			if (nrq == NULL) {
				error = ENOMEM;
				goto bad;
			}

			/*
			 * Append the new request area on the tail of our list.
			 */
			if ((trq = req->chain) == NULL) {
				req->chain = nrq;
			} else {
				while (trq->chain != NULL) {
					trq = trq->chain;
				}
				trq->chain = nrq;
			}
			trq = nrq;
			mpt_off = trq->req_vbuf;
			if (mpt->verbose >= MPT_PRT_DEBUG) {
				memset(mpt_off, 0xff, MPT_REQUEST_AREA);
			}
			nxt_off = 0;
		}
	}
out:

	/*
	 * Last time we need to check if this CCB needs to be aborted.
	 */
	if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_INPROG) {
		if (hdrp->Function == MPI_FUNCTION_TARGET_ASSIST) {
			request_t *cmd_req =
				MPT_TAG_2_REQ(mpt, ccb->csio.tag_id);
			MPT_TGT_STATE(mpt, cmd_req)->state = TGT_STATE_IN_CAM;
			MPT_TGT_STATE(mpt, cmd_req)->ccb = NULL;
			MPT_TGT_STATE(mpt, cmd_req)->req = NULL;
		}
		mpt_prt(mpt,
		    "mpt_execute_req: I/O cancelled (status 0x%x)\n",
		    ccb->ccb_h.status & CAM_STATUS_MASK);
		if (nseg && (ccb->ccb_h.flags & CAM_SG_LIST_PHYS) == 0) {
			bus_dmamap_unload(mpt->buffer_dmat, req->dmap);
		}
		ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
		KASSERT(ccb->ccb_h.status, ("zero ccb sts at %d\n", __LINE__));
		xpt_done(ccb);
		CAMLOCK_2_MPTLOCK(mpt);
		mpt_free_request(mpt, req);
		MPTLOCK_2_CAMLOCK(mpt);
		return;
	}

	ccb->ccb_h.status |= CAM_SIM_QUEUED;
	if (ccb->ccb_h.timeout != CAM_TIME_INFINITY) {
		ccb->ccb_h.timeout_ch =
			timeout(mpt_timeout, (caddr_t)ccb,
				(ccb->ccb_h.timeout * hz) / 1000);
	} else {
		callout_handle_init(&ccb->ccb_h.timeout_ch);
	}
	if (mpt->verbose > MPT_PRT_DEBUG) {
		int nc = 0;
		mpt_print_request(req->req_vbuf);
		for (trq = req->chain; trq; trq = trq->chain) {
			printf("  Additional Chain Area %d\n", nc++);
			mpt_dump_sgl(trq->req_vbuf, 0);
		}
	}

	if (hdrp->Function == MPI_FUNCTION_TARGET_ASSIST) {
		request_t *cmd_req = MPT_TAG_2_REQ(mpt, ccb->csio.tag_id);
		mpt_tgt_state_t *tgt = MPT_TGT_STATE(mpt, cmd_req);
#ifdef	WE_TRUST_AUTO_GOOD_STATUS
		if ((ccb->ccb_h.flags & CAM_SEND_STATUS) &&
		    csio->scsi_status == SCSI_STATUS_OK && tgt->resid == 0) {
			tgt->state = TGT_STATE_MOVING_DATA_AND_STATUS;
		} else {
			tgt->state = TGT_STATE_MOVING_DATA;
		}
#else
		tgt->state = TGT_STATE_MOVING_DATA;
#endif
	}
	CAMLOCK_2_MPTLOCK(mpt);
	mpt_send_cmd(mpt, req);
	MPTLOCK_2_CAMLOCK(mpt);
}

static void
mpt_start(struct cam_sim *sim, union ccb *ccb)
{
	request_t *req;
	struct mpt_softc *mpt;
	MSG_SCSI_IO_REQUEST *mpt_req;
	struct ccb_scsiio *csio = &ccb->csio;
	struct ccb_hdr *ccbh = &ccb->ccb_h;
	bus_dmamap_callback_t *cb;
	target_id_t tgt;
	int raid_passthru;

	/* Get the pointer for the physical addapter */
	mpt = ccb->ccb_h.ccb_mpt_ptr;
	raid_passthru = (sim == mpt->phydisk_sim);

	CAMLOCK_2_MPTLOCK(mpt);
	if ((req = mpt_get_request(mpt, FALSE)) == NULL) {
		if (mpt->outofbeer == 0) {
			mpt->outofbeer = 1;
			xpt_freeze_simq(mpt->sim, 1);
			mpt_lprt(mpt, MPT_PRT_DEBUG, "FREEZEQ\n");
		}
		ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
		mpt_set_ccb_status(ccb, CAM_REQUEUE_REQ);
		MPTLOCK_2_CAMLOCK(mpt);
		xpt_done(ccb);
		return;
	}
#ifdef	INVARIANTS
	mpt_req_not_spcl(mpt, req, "mpt_start", __LINE__);
#endif
	MPTLOCK_2_CAMLOCK(mpt);

	if (sizeof (bus_addr_t) > 4) {
		cb = mpt_execute_req_a64;
	} else {
		cb = mpt_execute_req;
	}

	/*
	 * Link the ccb and the request structure so we can find
	 * the other knowing either the request or the ccb
	 */
	req->ccb = ccb;
	ccb->ccb_h.ccb_req_ptr = req;

	/* Now we build the command for the IOC */
	mpt_req = req->req_vbuf;
	memset(mpt_req, 0, sizeof (MSG_SCSI_IO_REQUEST));

	mpt_req->Function = MPI_FUNCTION_SCSI_IO_REQUEST;
	if (raid_passthru) {
		mpt_req->Function = MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH;
		CAMLOCK_2_MPTLOCK(mpt);
		if (mpt_map_physdisk(mpt, ccb, &tgt) != 0) {
			MPTLOCK_2_CAMLOCK(mpt);
			ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
			mpt_set_ccb_status(ccb, CAM_DEV_NOT_THERE);
			xpt_done(ccb);
			return;
		}
		MPTLOCK_2_CAMLOCK(mpt);
		mpt_req->Bus = 0;	/* we never set bus here */
	} else {
		tgt = ccb->ccb_h.target_id;
		mpt_req->Bus = 0;	/* XXX */
		
	}
	mpt_req->SenseBufferLength =
		(csio->sense_len < MPT_SENSE_SIZE) ?
		 csio->sense_len : MPT_SENSE_SIZE;

	/*
	 * We use the message context to find the request structure when we
	 * Get the command completion interrupt from the IOC.
	 */
	mpt_req->MsgContext = htole32(req->index | scsi_io_handler_id);

	/* Which physical device to do the I/O on */
	mpt_req->TargetID = tgt;

	/* We assume a single level LUN type */
	if (ccb->ccb_h.target_lun >= 256) {
		mpt_req->LUN[0] = 0x40 | ((ccb->ccb_h.target_lun >> 8) & 0x3f);
		mpt_req->LUN[1] = ccb->ccb_h.target_lun & 0xff;
	} else {
		mpt_req->LUN[1] = ccb->ccb_h.target_lun;
	}

	/* Set the direction of the transfer */
	if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
		mpt_req->Control = MPI_SCSIIO_CONTROL_READ;
	} else if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT) {
		mpt_req->Control = MPI_SCSIIO_CONTROL_WRITE;
	} else {
		mpt_req->Control = MPI_SCSIIO_CONTROL_NODATATRANSFER;
	}

	if ((ccb->ccb_h.flags & CAM_TAG_ACTION_VALID) != 0) {
		switch(ccb->csio.tag_action) {
		case MSG_HEAD_OF_Q_TAG:
			mpt_req->Control |= MPI_SCSIIO_CONTROL_HEADOFQ;
			break;
		case MSG_ACA_TASK:
			mpt_req->Control |= MPI_SCSIIO_CONTROL_ACAQ;
			break;
		case MSG_ORDERED_Q_TAG:
			mpt_req->Control |= MPI_SCSIIO_CONTROL_ORDEREDQ;
			break;
		case MSG_SIMPLE_Q_TAG:
		default:
			mpt_req->Control |= MPI_SCSIIO_CONTROL_SIMPLEQ;
			break;
		}
	} else {
		if (mpt->is_fc || mpt->is_sas) {
			mpt_req->Control |= MPI_SCSIIO_CONTROL_SIMPLEQ;
		} else {
			/* XXX No such thing for a target doing packetized. */
			mpt_req->Control |= MPI_SCSIIO_CONTROL_UNTAGGED;
		}
	}

	if (mpt->is_spi) {
		if (ccb->ccb_h.flags & CAM_DIS_DISCONNECT) {
			mpt_req->Control |= MPI_SCSIIO_CONTROL_NO_DISCONNECT;
		}
	}

	/* Copy the scsi command block into place */
	if ((ccb->ccb_h.flags & CAM_CDB_POINTER) != 0) {
		bcopy(csio->cdb_io.cdb_ptr, mpt_req->CDB, csio->cdb_len);
	} else {
		bcopy(csio->cdb_io.cdb_bytes, mpt_req->CDB, csio->cdb_len);
	}

	mpt_req->CDBLength = csio->cdb_len;
	mpt_req->DataLength = csio->dxfer_len;
	mpt_req->SenseBufferLowAddr = req->sense_pbuf;

	/*
	 * Do a *short* print here if we're set to MPT_PRT_DEBUG
	 */
	if (mpt->verbose == MPT_PRT_DEBUG) {
		mpt_prt(mpt, "mpt_start: %s op 0x%x ",
		    (mpt_req->Function == MPI_FUNCTION_SCSI_IO_REQUEST)?
		    "SCSI_IO_REQUEST" : "SCSI_IO_PASSTHRU", mpt_req->CDB[0]);
		if (mpt_req->Control != MPI_SCSIIO_CONTROL_NODATATRANSFER) {
			mpt_prtc(mpt, "(%s %u byte%s ",
			    (mpt_req->Control == MPI_SCSIIO_CONTROL_READ)?
			    "read" : "write",  csio->dxfer_len,
			    (csio->dxfer_len == 1)? ")" : "s)");
		}
		mpt_prtc(mpt, "tgt %u lun %u req %p:%u\n", tgt,
		    ccb->ccb_h.target_lun, req, req->serno);
	}

	/*
	 * If we have any data to send with this command map it into bus space.
	 */
	if ((ccbh->flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
		if ((ccbh->flags & CAM_SCATTER_VALID) == 0) {
			/*
			 * We've been given a pointer to a single buffer.
			 */
			if ((ccbh->flags & CAM_DATA_PHYS) == 0) {
				/*
				 * Virtual address that needs to translated into
				 * one or more physical address ranges.
				 */
				int error;
				int s = splsoftvm();
				error = bus_dmamap_load(mpt->buffer_dmat,
				    req->dmap, csio->data_ptr, csio->dxfer_len,
				    cb, req, 0);
				splx(s);
				if (error == EINPROGRESS) {
					/*
					 * So as to maintain ordering,
					 * freeze the controller queue
					 * until our mapping is
					 * returned.
					 */
					xpt_freeze_simq(mpt->sim, 1);
					ccbh->status |= CAM_RELEASE_SIMQ;
				}
			} else {
				/*
				 * We have been given a pointer to single
				 * physical buffer.
				 */
				struct bus_dma_segment seg;
				seg.ds_addr = 
				    (bus_addr_t)(vm_offset_t)csio->data_ptr;
				seg.ds_len = csio->dxfer_len;
				(*cb)(req, &seg, 1, 0);
			}
		} else {
			/*
			 * We have been given a list of addresses.
			 * This case could be easily supported but they are not
			 * currently generated by the CAM subsystem so there
			 * is no point in wasting the time right now.
			 */
			struct bus_dma_segment *segs;
			if ((ccbh->flags & CAM_SG_LIST_PHYS) == 0) {
				(*cb)(req, NULL, 0, EFAULT);
			} else {
				/* Just use the segments provided */
				segs = (struct bus_dma_segment *)csio->data_ptr;
				(*cb)(req, segs, csio->sglist_cnt, 0);
			}
		}
	} else {
		(*cb)(req, NULL, 0, 0);
	}
}

static int
mpt_bus_reset(struct mpt_softc *mpt, target_id_t tgt, lun_id_t lun,
    int sleep_ok)
{
	int   error;
	uint16_t status;
	uint8_t response;

	error = mpt_scsi_send_tmf(mpt,
	    (tgt != CAM_TARGET_WILDCARD || lun != CAM_LUN_WILDCARD) ?
	    MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET :
	    MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
	    mpt->is_fc ? MPI_SCSITASKMGMT_MSGFLAGS_LIP_RESET_OPTION : 0,
	    0,	/* XXX How do I get the channel ID? */
	    tgt != CAM_TARGET_WILDCARD ? tgt : 0,
	    lun != CAM_LUN_WILDCARD ? lun : 0,
	    0, sleep_ok);

	if (error != 0) {
		/*
		 * mpt_scsi_send_tmf hard resets on failure, so no
		 * need to do so here.
		 */
		mpt_prt(mpt,
		    "mpt_bus_reset: mpt_scsi_send_tmf returned %d\n", error);
		return (EIO);
	}

	/* Wait for bus reset to be processed by the IOC. */
	error = mpt_wait_req(mpt, mpt->tmf_req, REQ_STATE_DONE,
	    REQ_STATE_DONE, sleep_ok, 5000);

	status = mpt->tmf_req->IOCStatus;
	response = mpt->tmf_req->ResponseCode;
	mpt->tmf_req->state = REQ_STATE_FREE;

	if (error) {
		mpt_prt(mpt, "mpt_bus_reset: Reset timed-out. "
		    "Resetting controller.\n");
		mpt_reset(mpt, TRUE);
		return (ETIMEDOUT);
	}

	if ((status & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) {
		mpt_prt(mpt, "mpt_bus_reset: TMF IOC Status 0x%x. "
		    "Resetting controller.\n", status);
		mpt_reset(mpt, TRUE);
		return (EIO);
	}

	if (response != MPI_SCSITASKMGMT_RSP_TM_SUCCEEDED &&
	    response != MPI_SCSITASKMGMT_RSP_TM_COMPLETE) {
		mpt_prt(mpt, "mpt_bus_reset: TMF Response 0x%x. "
		    "Resetting controller.\n", response);
		mpt_reset(mpt, TRUE);
		return (EIO);
	}
	return (0);
}

static int
mpt_fc_reset_link(struct mpt_softc *mpt, int dowait)
{
	int r = 0;
	request_t *req;
	PTR_MSG_FC_PRIMITIVE_SEND_REQUEST fc;

 	req = mpt_get_request(mpt, FALSE);
	if (req == NULL) {
		return (ENOMEM);
	}
	fc = req->req_vbuf;
	memset(fc, 0, sizeof(*fc));
	fc->SendFlags = MPI_FC_PRIM_SEND_FLAGS_RESET_LINK;
	fc->Function = MPI_FUNCTION_FC_PRIMITIVE_SEND;
	fc->MsgContext = htole32(req->index | fc_els_handler_id);
	mpt_send_cmd(mpt, req);
	if (dowait) {
		r = mpt_wait_req(mpt, req, REQ_STATE_DONE,
		    REQ_STATE_DONE, FALSE, 60 * 1000);
		if (r == 0) {
			mpt_free_request(mpt, req);
		}
	}
	return (r);
}

static int
mpt_cam_event(struct mpt_softc *mpt, request_t *req,
	      MSG_EVENT_NOTIFY_REPLY *msg)
{
	switch(msg->Event & 0xFF) {
	case MPI_EVENT_UNIT_ATTENTION:
		mpt_prt(mpt, "Bus: 0x%02x TargetID: 0x%02x\n",
		    (msg->Data[0] >> 8) & 0xff, msg->Data[0] & 0xff);
		break;

	case MPI_EVENT_IOC_BUS_RESET:
		/* We generated a bus reset */
		mpt_prt(mpt, "IOC Bus Reset Port: %d\n",
		    (msg->Data[0] >> 8) & 0xff);
		xpt_async(AC_BUS_RESET, mpt->path, NULL);
		break;

	case MPI_EVENT_EXT_BUS_RESET:
		/* Someone else generated a bus reset */
		mpt_prt(mpt, "External Bus Reset Detected\n");
		/*
		 * These replies don't return EventData like the MPI
		 * spec says they do
		 */	
		xpt_async(AC_BUS_RESET, mpt->path, NULL);
		break;

	case MPI_EVENT_RESCAN:
		/*
		 * In general this means a device has been added to the loop.
		 */
		mpt_prt(mpt, "Rescan Port: %d\n", (msg->Data[0] >> 8) & 0xff);
/*		xpt_async(AC_FOUND_DEVICE, path, NULL);  */
		break;

	case MPI_EVENT_LINK_STATUS_CHANGE:
		mpt_prt(mpt, "Port %d: LinkState: %s\n",
		    (msg->Data[1] >> 8) & 0xff,
		    ((msg->Data[0] & 0xff) == 0)?  "Failed" : "Active");
		break;

	case MPI_EVENT_LOOP_STATE_CHANGE:
		switch ((msg->Data[0] >> 16) & 0xff) {
		case 0x01:
			mpt_prt(mpt,
			    "Port 0x%x: FC LinkEvent: LIP(%02x,%02x) "
			    "(Loop Initialization)\n",
			    (msg->Data[1] >> 8) & 0xff,
			    (msg->Data[0] >> 8) & 0xff,
			    (msg->Data[0]     ) & 0xff);
			switch ((msg->Data[0] >> 8) & 0xff) {
			case 0xF7:
				if ((msg->Data[0] & 0xff) == 0xF7) {
					mpt_prt(mpt, "Device needs AL_PA\n");
				} else {
					mpt_prt(mpt, "Device %02x doesn't like "
					    "FC performance\n",
					    msg->Data[0] & 0xFF);
				}
				break;
			case 0xF8:
				if ((msg->Data[0] & 0xff) == 0xF7) {
					mpt_prt(mpt, "Device had loop failure "
					    "at its receiver prior to acquiring"
					    " AL_PA\n");
				} else {
					mpt_prt(mpt, "Device %02x detected loop"
					    " failure at its receiver\n", 
					    msg->Data[0] & 0xFF);
				}
				break;
			default:
				mpt_prt(mpt, "Device %02x requests that device "
				    "%02x reset itself\n", 
				    msg->Data[0] & 0xFF,
				    (msg->Data[0] >> 8) & 0xFF);
				break;
			}
			break;
		case 0x02:
			mpt_prt(mpt, "Port 0x%x: FC LinkEvent: "
			    "LPE(%02x,%02x) (Loop Port Enable)\n",
			    (msg->Data[1] >> 8) & 0xff, /* Port */
			    (msg->Data[0] >>  8) & 0xff, /* Character 3 */
			    (msg->Data[0]      ) & 0xff  /* Character 4 */);
			break;
		case 0x03:
			mpt_prt(mpt, "Port 0x%x: FC LinkEvent: "
			    "LPB(%02x,%02x) (Loop Port Bypass)\n",
			    (msg->Data[1] >> 8) & 0xff, /* Port */
			    (msg->Data[0] >> 8) & 0xff, /* Character 3 */
			    (msg->Data[0]     ) & 0xff  /* Character 4 */);
			break;
		default:
			mpt_prt(mpt, "Port 0x%x: FC LinkEvent: Unknown "
			    "FC event (%02x %02x %02x)\n",
			    (msg->Data[1] >> 8) & 0xff, /* Port */
			    (msg->Data[0] >> 16) & 0xff, /* Event */
			    (msg->Data[0] >>  8) & 0xff, /* Character 3 */
			    (msg->Data[0]      ) & 0xff  /* Character 4 */);
		}
		break;

	case MPI_EVENT_LOGOUT:
		mpt_prt(mpt, "FC Logout Port: %d N_PortID: %02x\n",
		    (msg->Data[1] >> 8) & 0xff, msg->Data[0]);
		break;
	case MPI_EVENT_EVENT_CHANGE:
		mpt_lprt(mpt, MPT_PRT_DEBUG,
		    "mpt_cam_event: MPI_EVENT_EVENT_CHANGE\n");
		break;
	case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
		/*
		 * Devices are attachin'.....
		 */
		mpt_prt(mpt,
		    "mpt_cam_event: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE\n");
		break;
	default:
		mpt_lprt(mpt, MPT_PRT_WARN, "mpt_cam_event: 0x%x\n",
		    msg->Event & 0xFF);
		return (0);
	}
	return (1);
}

/*
 * Reply path for all SCSI I/O requests, called from our
 * interrupt handler by extracting our handler index from
 * the MsgContext field of the reply from the IOC.
 *
 * This routine is optimized for the common case of a
 * completion without error.  All exception handling is
 * offloaded to non-inlined helper routines to minimize
 * cache footprint.
 */
static int
mpt_scsi_reply_handler(struct mpt_softc *mpt, request_t *req,
    uint32_t reply_desc, MSG_DEFAULT_REPLY *reply_frame)
{
	MSG_SCSI_IO_REQUEST *scsi_req;
	union ccb *ccb;
	target_id_t tgt;

	if (req->state == REQ_STATE_FREE) {
		mpt_prt(mpt, "mpt_scsi_reply_handler: req already free\n");
		return (TRUE);
	}

	scsi_req = (MSG_SCSI_IO_REQUEST *)req->req_vbuf;
	ccb = req->ccb;
	if (ccb == NULL) {
		mpt_prt(mpt, "mpt_scsi_reply_handler: req %p:%u with no ccb\n",
		    req, req->serno);
		return (TRUE);
	}

	tgt = scsi_req->TargetID;
	untimeout(mpt_timeout, ccb, ccb->ccb_h.timeout_ch);
	ccb->ccb_h.status &= ~CAM_SIM_QUEUED;

	if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
		bus_dmasync_op_t op;

		if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN)
			op = BUS_DMASYNC_POSTREAD;
		else
			op = BUS_DMASYNC_POSTWRITE;
		bus_dmamap_sync(mpt->buffer_dmat, req->dmap, op);
		bus_dmamap_unload(mpt->buffer_dmat, req->dmap);
	}

	if (reply_frame == NULL) {
		/*
		 * Context only reply, completion without error status.
		 */
		ccb->csio.resid = 0;
		mpt_set_ccb_status(ccb, CAM_REQ_CMP);
		ccb->csio.scsi_status = SCSI_STATUS_OK;
	} else {
		mpt_scsi_reply_frame_handler(mpt, req, reply_frame);
	}

	if (mpt->outofbeer) {
		ccb->ccb_h.status |= CAM_RELEASE_SIMQ;
		mpt->outofbeer = 0;
		mpt_lprt(mpt, MPT_PRT_DEBUG, "THAWQ\n");
	}
	if (scsi_req->CDB[0] == INQUIRY && (scsi_req->CDB[1] & SI_EVPD) == 0) {
		struct scsi_inquiry_data *iq = 
		    (struct scsi_inquiry_data *)ccb->csio.data_ptr;
		if (scsi_req->Function ==
		    MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) {
			/*
			 * Fake out the device type so that only the
			 * pass-thru device will attach.
			 */
			iq->device &= ~0x1F;
			iq->device |= T_NODEVICE;
		}
	}
	if (mpt->verbose == MPT_PRT_DEBUG) {
		mpt_prt(mpt, "mpt_scsi_reply_handler: %p:%u complete\n",
		    req, req->serno);
	}
	KASSERT(ccb->ccb_h.status, ("zero ccb sts at %d\n", __LINE__));
	MPTLOCK_2_CAMLOCK(mpt);
	xpt_done(ccb);
	CAMLOCK_2_MPTLOCK(mpt);
	if ((req->state & REQ_STATE_TIMEDOUT) == 0) {
		TAILQ_REMOVE(&mpt->request_pending_list, req, links);
	} else {
		mpt_prt(mpt, "completing timedout/aborted req %p:%u\n",
		    req, req->serno);
		TAILQ_REMOVE(&mpt->request_timeout_list, req, links);
	}
	KASSERT((req->state & REQ_STATE_NEED_WAKEUP) == 0,
	    ("CCB req needed wakeup"));
#ifdef	INVARIANTS
	mpt_req_not_spcl(mpt, req, "mpt_scsi_reply_handler", __LINE__);
#endif
	mpt_free_request(mpt, req);
	return (TRUE);
}

static int
mpt_scsi_tmf_reply_handler(struct mpt_softc *mpt, request_t *req,
    uint32_t reply_desc, MSG_DEFAULT_REPLY *reply_frame)
{
	MSG_SCSI_TASK_MGMT_REPLY *tmf_reply;

	KASSERT(req == mpt->tmf_req, ("TMF Reply not using mpt->tmf_req"));
#ifdef	INVARIANTS
	mpt_req_not_spcl(mpt, req, "mpt_scsi_tmf_reply_handler", __LINE__);
#endif
	tmf_reply = (MSG_SCSI_TASK_MGMT_REPLY *)reply_frame;
	/* Record IOC Status and Response Code of TMF for any waiters. */
	req->IOCStatus = le16toh(tmf_reply->IOCStatus);
	req->ResponseCode = tmf_reply->ResponseCode;

	mpt_lprt(mpt, MPT_PRT_INFO, "TMF complete: req %p:%u status 0x%x\n",
	    req, req->serno, le16toh(tmf_reply->IOCStatus));
	TAILQ_REMOVE(&mpt->request_pending_list, req, links);
	if ((req->state & REQ_STATE_NEED_WAKEUP) != 0) {
		req->state |= REQ_STATE_DONE;
		wakeup(req);
	} else {
		mpt->tmf_req->state = REQ_STATE_FREE;
	}
	return (TRUE);
}

/*
 * XXX: Move to definitions file
 */
#define	ELS	0x22
#define	FC4LS	0x32
#define	ABTS	0x81
#define	BA_ACC	0x84

#define	LS_RJT	0x01 
#define	LS_ACC	0x02
#define	PLOGI	0x03
#define	LOGO	0x05
#define SRR	0x14
#define PRLI	0x20
#define PRLO	0x21
#define ADISC	0x52
#define RSCN	0x61

static void
mpt_fc_els_send_response(struct mpt_softc *mpt, request_t *req,
    PTR_MSG_LINK_SERVICE_BUFFER_POST_REPLY rp, U8 length)
{
	MSG_LINK_SERVICE_RSP_REQUEST tmp;
	PTR_MSG_LINK_SERVICE_RSP_REQUEST rsp;

	/*
	 * We are going to reuse the ELS request to send this response back.
	 */
	rsp = &tmp;
	memset(rsp, 0, sizeof(*rsp));

#ifdef	USE_IMMEDIATE_LINK_DATA
	/*
	 * Apparently the IMMEDIATE stuff doesn't seem to work.
	 */
	rsp->RspFlags = LINK_SERVICE_RSP_FLAGS_IMMEDIATE;
#endif
	rsp->RspLength = length;
	rsp->Function = MPI_FUNCTION_FC_LINK_SRVC_RSP;
	rsp->MsgContext = htole32(req->index | fc_els_handler_id);

	/*
	 * Copy over information from the original reply frame to
	 * it's correct place in the response.
	 */
	memcpy((U8 *)rsp + 0x0c, (U8 *)rp + 0x1c, 24);

	/*
	 * And now copy back the temporary area to the original frame.
	 */
	memcpy(req->req_vbuf, rsp, sizeof (MSG_LINK_SERVICE_RSP_REQUEST));
	rsp = req->req_vbuf;

#ifdef	USE_IMMEDIATE_LINK_DATA
	memcpy((U8 *)&rsp->SGL, &((U8 *)req->req_vbuf)[MPT_RQSL(mpt)], length);
#else
{
	PTR_SGE_SIMPLE32 se = (PTR_SGE_SIMPLE32) &rsp->SGL;
	bus_addr_t paddr = req->req_pbuf;
	paddr += MPT_RQSL(mpt);

	se->FlagsLength =
		MPI_SGE_FLAGS_HOST_TO_IOC	|
		MPI_SGE_FLAGS_SIMPLE_ELEMENT	|
		MPI_SGE_FLAGS_LAST_ELEMENT	|
		MPI_SGE_FLAGS_END_OF_LIST	|
		MPI_SGE_FLAGS_END_OF_BUFFER;
	se->FlagsLength <<= MPI_SGE_FLAGS_SHIFT;
	se->FlagsLength |= (length);
	se->Address = (uint32_t) paddr;
}
#endif

	/*
	 * Send it on...
	 */
	mpt_send_cmd(mpt, req);
}

static int
mpt_fc_els_reply_handler(struct mpt_softc *mpt, request_t *req,
    uint32_t reply_desc, MSG_DEFAULT_REPLY *reply_frame)
{
	PTR_MSG_LINK_SERVICE_BUFFER_POST_REPLY rp =
	    (PTR_MSG_LINK_SERVICE_BUFFER_POST_REPLY) reply_frame;
	U8 rctl;
	U8 type;
	U8 cmd;
	U16 status = le16toh(reply_frame->IOCStatus);
	U32 *elsbuf;
	int ioindex;
	int do_refresh = TRUE;

#ifdef	INVARIANTS
	KASSERT(mpt_req_on_free_list(mpt, req) == 0,
	    ("fc_els_reply_handler: req %p:%u for function %x on freelist!",
	    req, req->serno, rp->Function));
	if (rp->Function != MPI_FUNCTION_FC_PRIMITIVE_SEND) {
		mpt_req_spcl(mpt, req, "fc_els_reply_handler", __LINE__);
	} else {
		mpt_req_not_spcl(mpt, req, "fc_els_reply_handler", __LINE__);
	}
#endif
	mpt_lprt(mpt, MPT_PRT_DEBUG,
	    "FC_ELS Complete: req %p:%u, reply %p function %x\n",
	    req, req->serno, reply_frame, reply_frame->Function);

	if  (status != MPI_IOCSTATUS_SUCCESS) {
		mpt_prt(mpt, "ELS REPLY STATUS 0x%x for Function %x\n",
		    status, reply_frame->Function);
		if (status == MPI_IOCSTATUS_INVALID_STATE) {
			/*
			 * XXX: to get around shutdown issue
			 */
			mpt->disabled = 1;
			return (TRUE);
		}
		return (TRUE);
	}

	/*
	 * If the function of a link service response, we recycle the
	 * response to be a refresh for a new link service request.
	 *
	 * The request pointer is bogus in this case and we have to fetch
	 * it based upon the TransactionContext.
	 */
	if (rp->Function == MPI_FUNCTION_FC_LINK_SRVC_RSP) {
		/* Freddie Uncle Charlie Katie */
		/* We don't get the IOINDEX as part of the Link Svc Rsp */
		for (ioindex = 0; ioindex < mpt->els_cmds_allocated; ioindex++)
			if (mpt->els_cmd_ptrs[ioindex] == req) {
				break;
			}

		KASSERT(ioindex < mpt->els_cmds_allocated,
		    ("can't find my mommie!"));

		/* remove from active list as we're going to re-post it */
		TAILQ_REMOVE(&mpt->request_pending_list, req, links);
		req->state &= ~REQ_STATE_QUEUED;
		req->state |= REQ_STATE_DONE;
		mpt_fc_post_els(mpt, req, ioindex);
		return (TRUE);
	}

	if (rp->Function == MPI_FUNCTION_FC_PRIMITIVE_SEND) {
		/* remove from active list as we're done */
		TAILQ_REMOVE(&mpt->request_pending_list, req, links);
		req->state &= ~REQ_STATE_QUEUED;
		req->state |= REQ_STATE_DONE;
		if (req->state & REQ_STATE_TIMEDOUT) {
			mpt_lprt(mpt, MPT_PRT_DEBUG,
			    "Sync Primitive Send Completed After Timeout\n");
			mpt_free_request(mpt, req);
		} else if ((req->state & REQ_STATE_NEED_WAKEUP) == 0) {
			mpt_lprt(mpt, MPT_PRT_DEBUG,
			    "Async Primitive Send Complete\n");
			mpt_free_request(mpt, req);
		} else {
			mpt_lprt(mpt, MPT_PRT_DEBUG,
			    "Sync Primitive Send Complete- Waking Waiter\n");
			wakeup(req);
		}
		return (TRUE);
	}

	if (rp->Function != MPI_FUNCTION_FC_LINK_SRVC_BUF_POST) {
		mpt_prt(mpt, "unexpected ELS_REPLY: Function 0x%x Flags %x "
		    "Length %d Message Flags %x\n", rp->Function, rp->Flags,
		    rp->MsgLength, rp->MsgFlags);
		return (TRUE);
	}

	if (rp->MsgLength <= 5) {
		/*
		 * This is just a ack of an original ELS buffer post
		 */
		mpt_lprt(mpt, MPT_PRT_DEBUG,
		    "RECV'd ACK of FC_ELS buf post %p:%u\n", req, req->serno);
		return (TRUE);
	}


	rctl = (le32toh(rp->Rctl_Did) & MPI_FC_RCTL_MASK) >> MPI_FC_RCTL_SHIFT;
	type = (le32toh(rp->Type_Fctl) & MPI_FC_TYPE_MASK) >> MPI_FC_TYPE_SHIFT;

	elsbuf = &((U32 *)req->req_vbuf)[MPT_RQSL(mpt)/sizeof (U32)];
	cmd = be32toh(elsbuf[0]) >> 24;

	if (rp->Flags & MPI_LS_BUF_POST_REPLY_FLAG_NO_RSP_NEEDED) {
		mpt_lprt(mpt, MPT_PRT_ALWAYS, "ELS_REPLY: response unneeded\n");
		return (TRUE);
	}

	ioindex = le32toh(rp->TransactionContext);
	req = mpt->els_cmd_ptrs[ioindex];

	if (rctl == ELS && type == 1) {
		switch (cmd) {
		case PRLI:
			/*
			 * Send back a PRLI ACC
			 */
			mpt_prt(mpt, "PRLI from 0x%08x%08x\n",
			    le32toh(rp->Wwn.PortNameHigh),
			    le32toh(rp->Wwn.PortNameLow));
			elsbuf[0] = htobe32(0x02100014);
			elsbuf[1] |= htobe32(0x00000100);
			elsbuf[4] = htobe32(0x00000002);
			if (mpt->role & MPT_ROLE_TARGET)
				elsbuf[4] |= htobe32(0x00000010);
			if (mpt->role & MPT_ROLE_INITIATOR)
				elsbuf[4] |= htobe32(0x00000020);
			/* remove from active list as we're done */
			TAILQ_REMOVE(&mpt->request_pending_list, req, links);
			req->state &= ~REQ_STATE_QUEUED;
			req->state |= REQ_STATE_DONE;
			mpt_fc_els_send_response(mpt, req, rp, 20);
			do_refresh = FALSE;
			break;
		case PRLO:
			memset(elsbuf, 0, 5 * (sizeof (U32)));
			elsbuf[0] = htobe32(0x02100014);
			elsbuf[1] = htobe32(0x08000100);
			mpt_prt(mpt, "PRLO from 0x%08x%08x\n",
			    le32toh(rp->Wwn.PortNameHigh),
			    le32toh(rp->Wwn.PortNameLow));
			/* remove from active list as we're done */
			TAILQ_REMOVE(&mpt->request_pending_list, req, links);
			req->state &= ~REQ_STATE_QUEUED;
			req->state |= REQ_STATE_DONE;
			mpt_fc_els_send_response(mpt, req, rp, 20);
			do_refresh = FALSE;
			break;
		default:
			mpt_prt(mpt, "ELS TYPE 1 COMMAND: %x\n", cmd);
			break;
		}
	} else if (rctl == ABTS && type == 0) {
		uint16_t rx_id = le16toh(rp->Rxid);
		uint16_t ox_id = le16toh(rp->Oxid);
		request_t *tgt_req = NULL;

		mpt_prt(mpt,
		    "ELS: ABTS OX_ID 0x%x RX_ID 0x%x from 0x%08x%08x\n",
		    ox_id, rx_id, le32toh(rp->Wwn.PortNameHigh),
		    le32toh(rp->Wwn.PortNameLow));
		if (rx_id >= mpt->mpt_max_tgtcmds) {
			mpt_prt(mpt, "Bad RX_ID 0x%x\n", rx_id);
		} else if (mpt->tgt_cmd_ptrs == NULL) {
			mpt_prt(mpt, "No TGT CMD PTRS\n");
		} else {
			tgt_req = mpt->tgt_cmd_ptrs[rx_id];
		}
		if (tgt_req) {
			mpt_tgt_state_t *tgt = MPT_TGT_STATE(mpt, tgt_req);
			uint8_t *vbuf;
			union ccb *ccb = tgt->ccb;
			uint32_t ct_id;

			vbuf = tgt_req->req_vbuf;
			vbuf += MPT_RQSL(mpt);

			/*
			 * Check to make sure we have the correct command
			 * The reply descriptor in the target state should
			 * should contain an IoIndex that should match the
			 * RX_ID.
			 *
			 * It'd be nice to have OX_ID to crosscheck with
			 * as well.
			 */
			ct_id = GET_IO_INDEX(tgt->reply_desc);

			if (ct_id != rx_id) {
				mpt_lprt(mpt, MPT_PRT_ERROR, "ABORT Mismatch: "
				    "RX_ID received=0x%x; RX_ID in cmd=0x%x\n",
				    rx_id, ct_id);
				goto skip;
			}

			ccb = tgt->ccb;
			if (ccb) {
				mpt_prt(mpt,
				    "CCB (%p): lun %u flags %x status %x\n",
				    ccb, ccb->ccb_h.target_lun,
				    ccb->ccb_h.flags, ccb->ccb_h.status);
			}
			mpt_prt(mpt, "target state 0x%x resid %u xfrd %u rpwrd "
			    "%x nxfers %x\n", tgt->state,
			    tgt->resid, tgt->bytes_xfered, tgt->reply_desc,
			    tgt->nxfers);
  skip:
			if (mpt_abort_target_cmd(mpt, tgt_req)) {
				mpt_prt(mpt, "unable to start TargetAbort\n");
			}
		} else {
			mpt_prt(mpt, "no back pointer for RX_ID 0x%x\n", rx_id);
		}
		memset(elsbuf, 0, 5 * (sizeof (U32)));
		elsbuf[0] = htobe32(0);
		elsbuf[1] = htobe32((ox_id << 16) | rx_id);
		elsbuf[2] = htobe32(0x000ffff);
		/*
		 * Dork with the reply frame so that the reponse to it
		 * will be correct.
		 */
		rp->Rctl_Did += ((BA_ACC - ABTS) << MPI_FC_RCTL_SHIFT);
		/* remove from active list as we're done */
		TAILQ_REMOVE(&mpt->request_pending_list, req, links);
		req->state &= ~REQ_STATE_QUEUED;
		req->state |= REQ_STATE_DONE;
		mpt_fc_els_send_response(mpt, req, rp, 12);
		do_refresh = FALSE;
	} else {
		mpt_prt(mpt, "ELS: RCTL %x TYPE %x CMD %x\n", rctl, type, cmd);
	}
	if (do_refresh == TRUE) {
		/* remove from active list as we're done */
		TAILQ_REMOVE(&mpt->request_pending_list, req, links);
		req->state &= ~REQ_STATE_QUEUED;
		req->state |= REQ_STATE_DONE;
		mpt_fc_post_els(mpt, req, ioindex);
	}
	return (TRUE);
}

/*
 * Clean up all SCSI Initiator personality state in response
 * to a controller reset.
 */
static void
mpt_cam_ioc_reset(struct mpt_softc *mpt, int type)
{
	/*
	 * The pending list is already run down by
	 * the generic handler.  Perform the same
	 * operation on the timed out request list.
	 */
	mpt_complete_request_chain(mpt, &mpt->request_timeout_list,
				   MPI_IOCSTATUS_INVALID_STATE);

	/*
	 * XXX: We need to repost ELS and Target Command Buffers?
	 */

	/*
	 * Inform the XPT that a bus reset has occurred.
	 */
	xpt_async(AC_BUS_RESET, mpt->path, NULL);
}

/*
 * Parse additional completion information in the reply
 * frame for SCSI I/O requests.
 */
static int
mpt_scsi_reply_frame_handler(struct mpt_softc *mpt, request_t *req,
			     MSG_DEFAULT_REPLY *reply_frame)
{
	union ccb *ccb;
	MSG_SCSI_IO_REPLY *scsi_io_reply;
	u_int ioc_status;
	u_int sstate;
	u_int loginfo;

	MPT_DUMP_REPLY_FRAME(mpt, reply_frame);
	KASSERT(reply_frame->Function == MPI_FUNCTION_SCSI_IO_REQUEST
	     || reply_frame->Function == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH,
		("MPT SCSI I/O Handler called with incorrect reply type"));
	KASSERT((reply_frame->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY) == 0,
		("MPT SCSI I/O Handler called with continuation reply"));

	scsi_io_reply = (MSG_SCSI_IO_REPLY *)reply_frame;
	ioc_status = le16toh(scsi_io_reply->IOCStatus);
	loginfo = ioc_status & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE;
	ioc_status &= MPI_IOCSTATUS_MASK;
	sstate = scsi_io_reply->SCSIState;

	ccb = req->ccb;
	ccb->csio.resid =
	    ccb->csio.dxfer_len - le32toh(scsi_io_reply->TransferCount);

	if ((sstate & MPI_SCSI_STATE_AUTOSENSE_VALID) != 0
	 && (ccb->ccb_h.flags & (CAM_SENSE_PHYS | CAM_SENSE_PTR)) == 0) {
		ccb->ccb_h.status |= CAM_AUTOSNS_VALID;
		ccb->csio.sense_resid =
		    ccb->csio.sense_len - scsi_io_reply->SenseCount;
		bcopy(req->sense_vbuf, &ccb->csio.sense_data,
		      min(ccb->csio.sense_len, scsi_io_reply->SenseCount));
	}

	if ((sstate & MPI_SCSI_STATE_QUEUE_TAG_REJECTED) != 0) {
		/*
		 * Tag messages rejected, but non-tagged retry
		 * was successful.
XXXX
		mpt_set_tags(mpt, devinfo, MPT_QUEUE_NONE);
		 */
	}

	switch(ioc_status) {
	case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
		/*
		 * XXX
		 * Linux driver indicates that a zero
		 * transfer length with this error code
		 * indicates a CRC error.
		 *
		 * No need to swap the bytes for checking
		 * against zero.
		 */
		if (scsi_io_reply->TransferCount == 0) {
			mpt_set_ccb_status(ccb, CAM_UNCOR_PARITY);
			break;
		}
		/* FALLTHROUGH */
	case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN:
	case MPI_IOCSTATUS_SUCCESS:
	case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR:
		if ((sstate & MPI_SCSI_STATE_NO_SCSI_STATUS) != 0) {
			/*
			 * Status was never returned for this transaction.
			 */
			mpt_set_ccb_status(ccb, CAM_UNEXP_BUSFREE);
		} else if (scsi_io_reply->SCSIStatus != SCSI_STATUS_OK) {
			ccb->csio.scsi_status = scsi_io_reply->SCSIStatus;
			mpt_set_ccb_status(ccb, CAM_SCSI_STATUS_ERROR);
			if ((sstate & MPI_SCSI_STATE_AUTOSENSE_FAILED) != 0)
				mpt_set_ccb_status(ccb, CAM_AUTOSENSE_FAIL);
		} else if ((sstate & MPI_SCSI_STATE_RESPONSE_INFO_VALID) != 0) {

			/* XXX Handle SPI-Packet and FCP-2 reponse info. */
			mpt_set_ccb_status(ccb, CAM_REQ_CMP_ERR);
		} else
			mpt_set_ccb_status(ccb, CAM_REQ_CMP);
		break;
	case MPI_IOCSTATUS_SCSI_DATA_OVERRUN:
		mpt_set_ccb_status(ccb, CAM_DATA_RUN_ERR);
		break;
	case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR:
		mpt_set_ccb_status(ccb, CAM_UNCOR_PARITY);
		break;
	case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
		/*
		 * Since selection timeouts and "device really not
		 * there" are grouped into this error code, report
		 * selection timeout.  Selection timeouts are
		 * typically retried before giving up on the device
		 * whereas "device not there" errors are considered
		 * unretryable.
		 */
		mpt_set_ccb_status(ccb, CAM_SEL_TIMEOUT);
		break;
	case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR:
		mpt_set_ccb_status(ccb, CAM_SEQUENCE_FAIL);
		break;
	case MPI_IOCSTATUS_SCSI_INVALID_BUS:
		mpt_set_ccb_status(ccb, CAM_PATH_INVALID);
		break;
	case MPI_IOCSTATUS_SCSI_INVALID_TARGETID:
		mpt_set_ccb_status(ccb, CAM_TID_INVALID);
		break;
	case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
		ccb->ccb_h.status = CAM_UA_TERMIO;
		break;
	case MPI_IOCSTATUS_INVALID_STATE:
		/*
		 * The IOC has been reset.  Emulate a bus reset.
		 */
		/* FALLTHROUGH */
	case MPI_IOCSTATUS_SCSI_EXT_TERMINATED:
		ccb->ccb_h.status = CAM_SCSI_BUS_RESET; 
		break;
	case MPI_IOCSTATUS_SCSI_TASK_TERMINATED:
	case MPI_IOCSTATUS_SCSI_IOC_TERMINATED:
		/*
		 * Don't clobber any timeout status that has
		 * already been set for this transaction.  We
		 * want the SCSI layer to be able to differentiate
		 * between the command we aborted due to timeout
		 * and any innocent bystanders.
		 */
		if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_INPROG)
			break;
		mpt_set_ccb_status(ccb, CAM_REQ_TERMIO);
		break;

	case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES:
		mpt_set_ccb_status(ccb, CAM_RESRC_UNAVAIL);
		break;
	case MPI_IOCSTATUS_BUSY:
		mpt_set_ccb_status(ccb, CAM_BUSY);
		break;
	case MPI_IOCSTATUS_INVALID_FUNCTION:
	case MPI_IOCSTATUS_INVALID_SGL:
	case MPI_IOCSTATUS_INTERNAL_ERROR:
	case MPI_IOCSTATUS_INVALID_FIELD:
	default:
		/* XXX
		 * Some of the above may need to kick
		 * of a recovery action!!!!
		 */
		ccb->ccb_h.status = CAM_UNREC_HBA_ERROR;
		break;
	}

	if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
		mpt_freeze_ccb(ccb);
	}

	return (TRUE);
}

static void
mpt_action(struct cam_sim *sim, union ccb *ccb)
{
	struct mpt_softc *mpt;
	struct ccb_trans_settings *cts;
	target_id_t tgt;
	lun_id_t lun;
	int raid_passthru;

	CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("mpt_action\n"));

	mpt = (struct mpt_softc *)cam_sim_softc(sim);
	KASSERT(MPT_OWNED(mpt) == 0, ("mpt owned on entrance to mpt_action"));
	raid_passthru = (sim == mpt->phydisk_sim);

	tgt = ccb->ccb_h.target_id;
	lun = ccb->ccb_h.target_lun;
	if (raid_passthru && ccb->ccb_h.func_code != XPT_PATH_INQ &&
	    ccb->ccb_h.func_code != XPT_RESET_BUS &&
	    ccb->ccb_h.func_code != XPT_RESET_DEV) {
		CAMLOCK_2_MPTLOCK(mpt);
		if (mpt_map_physdisk(mpt, ccb, &tgt) != 0) {
			MPTLOCK_2_CAMLOCK(mpt);
			ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
			mpt_set_ccb_status(ccb, CAM_DEV_NOT_THERE);
			xpt_done(ccb);
			return;
		}
		MPTLOCK_2_CAMLOCK(mpt);
	}
	ccb->ccb_h.ccb_mpt_ptr = mpt;

	switch (ccb->ccb_h.func_code) {
	case XPT_SCSI_IO:	/* Execute the requested I/O operation */
		/*
		 * Do a couple of preliminary checks...
		 */
		if ((ccb->ccb_h.flags & CAM_CDB_POINTER) != 0) {
			if ((ccb->ccb_h.flags & CAM_CDB_PHYS) != 0) {
				ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
				mpt_set_ccb_status(ccb, CAM_REQ_INVALID);
				break;
			}
		}
		/* Max supported CDB length is 16 bytes */
		/* XXX Unless we implement the new 32byte message type */
		if (ccb->csio.cdb_len >
		    sizeof (((PTR_MSG_SCSI_IO_REQUEST)0)->CDB)) {
			ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
			mpt_set_ccb_status(ccb, CAM_REQ_INVALID);
			break;
		}
		ccb->csio.scsi_status = SCSI_STATUS_OK;
		mpt_start(sim, ccb);
		return;

	case XPT_RESET_BUS:
	case XPT_RESET_DEV:
		mpt_lprt(mpt, MPT_PRT_DEBUG,
			ccb->ccb_h.func_code == XPT_RESET_BUS ?
			"XPT_RESET_BUS\n" : "XPT_RESET_DEV\n");

		CAMLOCK_2_MPTLOCK(mpt);
		(void) mpt_bus_reset(mpt, tgt, lun, FALSE);
		MPTLOCK_2_CAMLOCK(mpt);

		/*
		 * mpt_bus_reset is always successful in that it
		 * will fall back to a hard reset should a bus
		 * reset attempt fail.
		 */
		ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
		mpt_set_ccb_status(ccb, CAM_REQ_CMP);
		break;
		
	case XPT_ABORT:
	{
		union ccb *accb = ccb->cab.abort_ccb;
		CAMLOCK_2_MPTLOCK(mpt);
		switch (accb->ccb_h.func_code) {
		case XPT_ACCEPT_TARGET_IO:
		case XPT_IMMED_NOTIFY:
			ccb->ccb_h.status = mpt_abort_target_ccb(mpt, ccb);
			break;
		case XPT_CONT_TARGET_IO:
			mpt_prt(mpt, "cannot abort active CTIOs yet\n");
			ccb->ccb_h.status = CAM_UA_ABORT;
			break;
		case XPT_SCSI_IO:
			ccb->ccb_h.status = CAM_UA_ABORT;
			break;
		default:
			ccb->ccb_h.status = CAM_REQ_INVALID;
			break;
		}
		MPTLOCK_2_CAMLOCK(mpt);
		break;
	}

#ifdef	CAM_NEW_TRAN_CODE
#define	IS_CURRENT_SETTINGS(c)	((c)->type == CTS_TYPE_CURRENT_SETTINGS)
#else
#define	IS_CURRENT_SETTINGS(c)	((c)->flags & CCB_TRANS_CURRENT_SETTINGS)
#endif
#define	DP_DISC_ENABLE	0x1
#define	DP_DISC_DISABL	0x2
#define	DP_DISC		(DP_DISC_ENABLE|DP_DISC_DISABL)

#define	DP_TQING_ENABLE	0x4
#define	DP_TQING_DISABL	0x8
#define	DP_TQING	(DP_TQING_ENABLE|DP_TQING_DISABL)

#define	DP_WIDE		0x10
#define	DP_NARROW	0x20
#define	DP_WIDTH	(DP_WIDE|DP_NARROW)

#define	DP_SYNC		0x40

	case XPT_SET_TRAN_SETTINGS:	/* Nexus Settings */
	{
#ifdef	CAM_NEW_TRAN_CODE
		struct ccb_trans_settings_scsi *scsi;
		struct ccb_trans_settings_spi *spi;
#endif
		uint8_t dval;
		u_int period;
		u_int offset;
		int i, j;

		cts = &ccb->cts;

		if (mpt->is_fc || mpt->is_sas) {
			mpt_set_ccb_status(ccb, CAM_REQ_CMP);
			break;
		}

		/*
		 * Skip attempting settings on RAID volume disks.
		 * Other devices on the bus get the normal treatment.
		 */
		if (mpt->phydisk_sim && raid_passthru == 0 &&
		    mpt_is_raid_volume(mpt, tgt) != 0) {
			mpt_lprt(mpt, MPT_PRT_NEGOTIATION,
			    "skipping transfer settings for RAID volumes\n");
			mpt_set_ccb_status(ccb, CAM_REQ_CMP);
			break;
		}

		i = mpt->mpt_port_page2.PortSettings &
		    MPI_SCSIPORTPAGE2_PORT_MASK_NEGO_MASTER_SETTINGS;
		j = mpt->mpt_port_page2.PortFlags &
		    MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK;
		if (i == MPI_SCSIPORTPAGE2_PORT_ALL_MASTER_SETTINGS &&
		    j == MPI_SCSIPORTPAGE2_PORT_FLAGS_OFF_DV) {
			mpt_lprt(mpt, MPT_PRT_ALWAYS,
			    "honoring BIOS transfer negotiations\n");
			mpt_set_ccb_status(ccb, CAM_REQ_CMP);
			break;
		}

		dval = 0;
		period = 0;
		offset = 0;

#ifndef	CAM_NEW_TRAN_CODE
		if ((cts->valid & CCB_TRANS_DISC_VALID) != 0) {
			dval |= (cts->flags & CCB_TRANS_DISC_ENB) ?
			    DP_DISC_ENABLE : DP_DISC_DISABL;
		}

		if ((cts->valid & CCB_TRANS_TQ_VALID) != 0) {
			dval |= (cts->flags & CCB_TRANS_TAG_ENB) ?
			    DP_TQING_ENABLE : DP_TQING_DISABL;
		}

		if ((cts->valid & CCB_TRANS_BUS_WIDTH_VALID) != 0) {
			dval |= cts->bus_width ? DP_WIDE : DP_NARROW;
		}

		if ((cts->valid & CCB_TRANS_SYNC_RATE_VALID) &&
		    (cts->valid & CCB_TRANS_SYNC_OFFSET_VALID)) {
			dval |= DP_SYNC;
			period = cts->sync_period;
			offset = cts->sync_offset;
		}
#else
		scsi = &cts->proto_specific.scsi;
		spi = &cts->xport_specific.spi;

		if ((spi->valid & CTS_SPI_VALID_DISC) != 0) {
			dval |= (spi->flags & CTS_SPI_FLAGS_DISC_ENB) != 0) ?
			    DP_DISC_ENABLE : DP_DISC_DISABL;
		}

		if ((scsi->valid & CTS_SCSI_VALID_TQ) != 0) {
			dval |= (scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) != 0) ?
			    DP_TQING_ENABLE : DP_TQING_DISABL;
		}

		if ((spi->valid & CTS_SPI_VALID_BUS_WIDTH) != 0) {
			dval |= (spi->bus_width == MSG_EXT_WDTR_BUS_16_BIT) ?
			    DP_WIDE : DP_NARROW;
		}

		if ((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) &&
		    (spi->valid & CTS_SPI_VALID_SYNC_RATE) &&
		    (spi->sync_period && spi->sync_offset)) {
			dval |= DP_SYNC;
			period = spi->sync_period;
			offset = spi->sync_offset;
		}
#endif
		CAMLOCK_2_MPTLOCK(mpt);
		if (dval & DP_DISC_ENABLE) {
			mpt->mpt_disc_enable |= (1 << tgt);
		} else if (dval & DP_DISC_DISABL) {
			mpt->mpt_disc_enable &= ~(1 << tgt);
		}
		if (dval & DP_TQING_ENABLE) {
			mpt->mpt_tag_enable |= (1 << tgt);
		} else if (dval & DP_TQING_DISABL) {
			mpt->mpt_tag_enable &= ~(1 << tgt);
		}
		if (dval & DP_WIDTH) {
			mpt_setwidth(mpt, tgt, 1);
		}
		if (dval & DP_SYNC) {
			mpt_setsync(mpt, tgt, period, offset);
		}

		if (mpt_update_spi_config(mpt, tgt)) {
			mpt_set_ccb_status(ccb, CAM_REQ_CMP_ERR);
		} else {
			mpt_set_ccb_status(ccb, CAM_REQ_CMP);
		}
		MPTLOCK_2_CAMLOCK(mpt);
		break;
	}
	case XPT_GET_TRAN_SETTINGS:
		cts = &ccb->cts;
		if (mpt->is_fc) {
#ifndef	CAM_NEW_TRAN_CODE
			/*
			 * a lot of normal SCSI things don't make sense.
			 */
			cts->flags = CCB_TRANS_TAG_ENB | CCB_TRANS_DISC_ENB;
			cts->valid = CCB_TRANS_DISC_VALID | CCB_TRANS_TQ_VALID;
			/*
			 * How do you measure the width of a high
			 * speed serial bus? Well, in bytes.
			 *
			 * Offset and period make no sense, though, so we set
			 * (above) a 'base' transfer speed to be gigabit.
			 */
			cts->bus_width = MSG_EXT_WDTR_BUS_8_BIT;
#else
			struct ccb_trans_settings_fc *fc =
			    &cts->xport_specific.fc;

			cts->protocol = PROTO_SCSI;
			cts->protocol_version = SCSI_REV_2;
			cts->transport = XPORT_FC;
			cts->transport_version = 0;

			fc->valid = CTS_FC_VALID_SPEED;
			fc->bitrate = 100000;	/* XXX: Need for 2Gb/s */
			/* XXX: need a port database for each target */
#endif
		} else if (mpt->is_sas) {
#ifndef	CAM_NEW_TRAN_CODE
			cts->flags = CCB_TRANS_TAG_ENB | CCB_TRANS_DISC_ENB;
			cts->valid = CCB_TRANS_DISC_VALID | CCB_TRANS_TQ_VALID;
			/*
			 * How do you measure the width of a high
			 * speed serial bus? Well, in bytes.
			 *
			 * Offset and period make no sense, though, so we set
			 * (above) a 'base' transfer speed to be gigabit.
			 */
			cts->bus_width = MSG_EXT_WDTR_BUS_8_BIT;
#else
			struct ccb_trans_settings_sas *sas =
			    &cts->xport_specific.sas;

			cts->protocol = PROTO_SCSI;
			cts->protocol_version = SCSI_REV_3;
			cts->transport = XPORT_SAS;
			cts->transport_version = 0;

			sas->valid = CTS_SAS_VALID_SPEED;
			sas->bitrate = 300000;	/* XXX: Default 3Gbps */
#endif
		} else if (mpt_get_spi_settings(mpt, cts) != 0) {
			mpt_set_ccb_status(ccb, CAM_REQ_CMP_ERR);
			break;
		}
		mpt_set_ccb_status(ccb, CAM_REQ_CMP);
		break;

	case XPT_CALC_GEOMETRY:
	{
		struct ccb_calc_geometry *ccg;

		ccg = &ccb->ccg;
		if (ccg->block_size == 0) {
			ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
			mpt_set_ccb_status(ccb, CAM_REQ_INVALID);
			break;
		}
		mpt_calc_geometry(ccg, /*extended*/1);
		KASSERT(ccb->ccb_h.status, ("zero ccb sts at %d\n", __LINE__));
		break;
	}
	case XPT_PATH_INQ:		/* Path routing inquiry */
	{
		struct ccb_pathinq *cpi = &ccb->cpi;

		cpi->version_num = 1;
		cpi->target_sprt = 0;
		cpi->hba_eng_cnt = 0;
		cpi->max_target = mpt->mpt_max_devices - 1;
		/*
		 * XXX: FC cards report MAX_DEVICES of 512- but we
		 * XXX: seem to hang when going higher than 255.
		 */
		if (cpi->max_target > 255)
			cpi->max_target = 255;
		/*
		 * XXX: VMware ESX reports > 16 devices and then dies
		 * XXX: when we probe.
		 */
		if (mpt->is_spi && cpi->max_target > 15)
			cpi->max_target = 15;
		cpi->max_lun = 7;
		cpi->initiator_id = mpt->mpt_ini_id;

		cpi->bus_id = cam_sim_bus(sim);
		/*
		 * Actual speed for each device varies.
		 *
		 * The base speed is the speed of the underlying connection.
		 * This is strictly determined for SPI (async, narrow). If
		 * link is up for Fibre Channel, then speed can be gotten
		 * from that.
		 */
		if (mpt->is_fc) {
			cpi->hba_misc = PIM_NOBUSRESET;
			cpi->base_transfer_speed =
			    mpt->mpt_fcport_speed * 100000;
			cpi->hba_inquiry = PI_TAG_ABLE;
		} else if (mpt->is_sas) {
			cpi->hba_misc = PIM_NOBUSRESET;
			cpi->base_transfer_speed = 300000;
			cpi->hba_inquiry = PI_TAG_ABLE;
		} else {
			cpi->hba_misc = PIM_SEQSCAN;
			cpi->base_transfer_speed = 3300;
			cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE|PI_WIDE_16;
		}

		/*
		 * We give our fake RAID passhtru bus a width that is MaxVolumes
		 * wide, restrict it to one lun and have it *not* be a bus
		 * that can have a SCSI bus reset.
		 */
		if (raid_passthru) {
			cpi->max_target = mpt->ioc_page2->MaxPhysDisks - 1;
			cpi->initiator_id = cpi->max_target + 1;
			cpi->max_lun = 0;
			cpi->hba_misc |= PIM_NOBUSRESET;
		}

		if ((mpt->role & MPT_ROLE_INITIATOR) == 0) {
			cpi->hba_misc |= PIM_NOINITIATOR;
		}
		if ((mpt->role & MPT_ROLE_TARGET) != 0) {
			cpi->target_sprt =
			    PIT_PROCESSOR | PIT_DISCONNECT | PIT_TERM_IO;
		} else {
			cpi->target_sprt = 0;
		}
		strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
		strncpy(cpi->hba_vid, "LSI", HBA_IDLEN);
		strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
		cpi->unit_number = cam_sim_unit(sim);
		cpi->ccb_h.status = CAM_REQ_CMP;
		break;
	}
	case XPT_EN_LUN:		/* Enable LUN as a target */
	{
		int result;

		CAMLOCK_2_MPTLOCK(mpt);
		if (ccb->cel.enable)
			result = mpt_enable_lun(mpt,
			    ccb->ccb_h.target_id, ccb->ccb_h.target_lun);
		else
			result = mpt_disable_lun(mpt,
			    ccb->ccb_h.target_id, ccb->ccb_h.target_lun);
		MPTLOCK_2_CAMLOCK(mpt);
		if (result == 0) {
			mpt_set_ccb_status(ccb, CAM_REQ_CMP);
		} else {
			mpt_set_ccb_status(ccb, CAM_REQ_CMP_ERR);
		}
		break;
	}
	case XPT_NOTIFY_ACK:		/* recycle notify ack */
	case XPT_IMMED_NOTIFY:		/* Add Immediate Notify Resource */
	case XPT_ACCEPT_TARGET_IO:	/* Add Accept Target IO Resource */
	{
		tgt_resource_t *trtp;
		lun_id_t lun = ccb->ccb_h.target_lun;
		ccb->ccb_h.sim_priv.entries[0].field = 0;
		ccb->ccb_h.sim_priv.entries[1].ptr = mpt;
		ccb->ccb_h.flags = 0;

		if (lun == CAM_LUN_WILDCARD) {
			if (ccb->ccb_h.target_id != CAM_TARGET_WILDCARD) {
				mpt_set_ccb_status(ccb, CAM_REQ_INVALID);
				break;
			}
			trtp = &mpt->trt_wildcard;
		} else if (lun >= MPT_MAX_LUNS) {
			mpt_set_ccb_status(ccb, CAM_REQ_INVALID);
			break;
		} else {
			trtp = &mpt->trt[lun];
		}
		CAMLOCK_2_MPTLOCK(mpt);
		if (ccb->ccb_h.func_code == XPT_ACCEPT_TARGET_IO) {
			mpt_lprt(mpt, MPT_PRT_DEBUG1,
			    "Put FREE ATIO %p lun %d\n", ccb, lun);
			STAILQ_INSERT_TAIL(&trtp->atios, &ccb->ccb_h,
			    sim_links.stqe);
		} else if (ccb->ccb_h.func_code == XPT_IMMED_NOTIFY) {
			mpt_lprt(mpt, MPT_PRT_DEBUG1,
			    "Put FREE INOT lun %d\n", lun);
			STAILQ_INSERT_TAIL(&trtp->inots, &ccb->ccb_h,
			    sim_links.stqe);
		} else {
			mpt_lprt(mpt, MPT_PRT_ALWAYS, "Got Notify ACK\n");
		}
		mpt_set_ccb_status(ccb, CAM_REQ_INPROG);
		MPTLOCK_2_CAMLOCK(mpt);
		return;
	}
	case XPT_CONT_TARGET_IO:
		CAMLOCK_2_MPTLOCK(mpt);
		mpt_target_start_io(mpt, ccb);
		MPTLOCK_2_CAMLOCK(mpt);
		return;

	default:
		ccb->ccb_h.status = CAM_REQ_INVALID;
		break;
	}
	xpt_done(ccb);
}

static int
mpt_get_spi_settings(struct mpt_softc *mpt, struct ccb_trans_settings *cts)
{
#ifdef	CAM_NEW_TRAN_CODE
	struct ccb_trans_settings_scsi *scsi = &cts->proto_specific.scsi;
	struct ccb_trans_settings_spi *spi = &cts->xport_specific.spi;
#endif
	target_id_t tgt;
	uint8_t dval, pval, oval;
	int rv;

	if (xpt_path_sim(cts->ccb_h.path) == mpt->phydisk_sim) {
		if (mpt_map_physdisk(mpt, (union ccb *)cts, &tgt)) {
			return (-1);
		}
	} else {
		tgt = cts->ccb_h.target_id;
	}

	/*
	 * XXX: We aren't looking Port Page 2 BIOS settings here.
	 * XXX: For goal settings, we pick the max from port page 0
	 * 
	 * For current settings we read the current settings out from
	 * device page 0 for that target.
	 */
	if (IS_CURRENT_SETTINGS(cts)) {
		CONFIG_PAGE_SCSI_DEVICE_0 tmp;
		dval = 0;

		CAMLOCK_2_MPTLOCK(mpt);
		tmp = mpt->mpt_dev_page0[tgt];
		rv = mpt_read_cur_cfg_page(mpt, tgt, &tmp.Header,
		    sizeof(tmp), FALSE, 5000);
		if (rv) {
			MPTLOCK_2_CAMLOCK(mpt);
			mpt_prt(mpt, "can't get tgt %d config page 0\n", tgt);
			return (rv);
		}
		MPTLOCK_2_CAMLOCK(mpt);
		dval |= (tmp.NegotiatedParameters & MPI_SCSIDEVPAGE0_NP_WIDE) ?
		    DP_WIDE : DP_NARROW;
		dval |= (mpt->mpt_disc_enable & (1 << tgt)) ?
		    DP_DISC_ENABLE : DP_DISC_DISABL;
		dval |= (mpt->mpt_tag_enable & (1 << tgt)) ?
		    DP_TQING_ENABLE : DP_TQING_DISABL;
		oval = (tmp.NegotiatedParameters >> 16) & 0xff;
		pval = (tmp.NegotiatedParameters >>  8) & 0xff;
		mpt->mpt_dev_page0[tgt] = tmp;
	} else {
		/*
		 * XXX: Just make theoretical maximum.
		 */
		dval = DP_WIDE|DP_DISC_ENABLE|DP_TQING_ENABLE;
		oval = (mpt->mpt_port_page0.Capabilities >> 16) & 0xff;
		pval = (mpt->mpt_port_page0.Capabilities >>  8) & 0xff;
	}
#ifndef	CAM_NEW_TRAN_CODE
	cts->flags &= ~(CCB_TRANS_DISC_ENB|CCB_TRANS_TAG_ENB);
	if (dval & DP_DISC_ENABLE) {
		cts->flags |= CCB_TRANS_DISC_ENB;
	}
	if (dval & DP_TQING_ENABLE) {
		cts->flags |= CCB_TRANS_TAG_ENB;
	}
	if (dval & DP_WIDE) {
		cts->bus_width = MSG_EXT_WDTR_BUS_16_BIT;
	} else {
		cts->bus_width = MSG_EXT_WDTR_BUS_8_BIT;
	}
	cts->valid = CCB_TRANS_BUS_WIDTH_VALID |
	    CCB_TRANS_DISC_VALID | CCB_TRANS_TQ_VALID;
	if (oval) {
		cts->sync_period = pval;
		cts->sync_offset = oval;
		cts->valid |=
		    CCB_TRANS_SYNC_RATE_VALID | CCB_TRANS_SYNC_OFFSET_VALID;
	}
#else
	cts->protocol = PROTO_SCSI;
	cts->protocol_version = SCSI_REV_2;
	cts->transport = XPORT_SPI;
	cts->transport_version = 2;

	scsi->flags &= ~CTS_SCSI_FLAGS_TAG_ENB;
	spi->flags &= ~CTS_SPI_FLAGS_DISC_ENB;
	if (dval & DP_DISC_ENABLE) {
		spi->flags |= CTS_SPI_FLAGS_DISC_ENB;
	}
	if (dval & DP_TQING_ENABLE) {
		scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB;
	}
	if (oval && pval) {
		spi->sync_offset = oval;
		spi->sync_period = pval;
		spi->valid |= CTS_SPI_VALID_SYNC_OFFSET;
		spi->valid |= CTS_SPI_VALID_SYNC_RATE;
	}
	spi->valid |= CTS_SPI_VALID_BUS_WIDTH;
	if (dval & DP_WIDE) {
		spi->bus_width = MSG_EXT_WDTR_BUS_16_BIT;
	} else {
		spi->bus_width = MSG_EXT_WDTR_BUS_8_BIT;
	}
	if (cts->ccb_h.target_lun != CAM_LUN_WILDCARD) {
		scsi->valid = CTS_SCSI_VALID_TQ;
		spi->valid |= CTS_SPI_VALID_DISC;
	} else {
		scsi->valid = 0;
	}
#endif
	mpt_lprt(mpt, MPT_PRT_NEGOTIATION,
	    "mpt_get_spi_settings[%d]: %s 0x%x period 0x%x offset %d\n", tgt,
	    IS_CURRENT_SETTINGS(cts)? "ACTIVE" : "NVRAM ", dval, pval, oval);
	return (0);
}

static void
mpt_setwidth(struct mpt_softc *mpt, int tgt, int onoff)
{
	PTR_CONFIG_PAGE_SCSI_DEVICE_1 ptr;

	ptr = &mpt->mpt_dev_page1[tgt];
	if (onoff) {
		ptr->RequestedParameters |= MPI_SCSIDEVPAGE1_RP_WIDE;
	} else {
		ptr->RequestedParameters &= ~MPI_SCSIDEVPAGE1_RP_WIDE;
	}
}

static void
mpt_setsync(struct mpt_softc *mpt, int tgt, int period, int offset)
{
	PTR_CONFIG_PAGE_SCSI_DEVICE_1 ptr;

	ptr = &mpt->mpt_dev_page1[tgt];
	ptr->RequestedParameters &= ~MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK;
	ptr->RequestedParameters &= ~MPI_SCSIDEVPAGE1_RP_MAX_SYNC_OFFSET_MASK;
	ptr->RequestedParameters &= ~MPI_SCSIDEVPAGE1_RP_DT;
	ptr->RequestedParameters &= ~MPI_SCSIDEVPAGE1_RP_QAS;
	ptr->RequestedParameters &= ~MPI_SCSIDEVPAGE1_RP_IU;
	ptr->RequestedParameters |= (period << 8) | (offset << 16);
	if (period < 0xa) {
		ptr->RequestedParameters |= MPI_SCSIDEVPAGE1_RP_DT;
	}
	if (period < 0x9) {
		ptr->RequestedParameters |= MPI_SCSIDEVPAGE1_RP_QAS;
		ptr->RequestedParameters |= MPI_SCSIDEVPAGE1_RP_IU;
	}
}

static int
mpt_update_spi_config(struct mpt_softc *mpt, int tgt)
{
	CONFIG_PAGE_SCSI_DEVICE_1 tmp;
	int rv;

	mpt_lprt(mpt, MPT_PRT_NEGOTIATION,
	    "mpt_update_spi_config[%d].page1: Requested Params 0x%08x\n",
	    tgt, mpt->mpt_dev_page1[tgt].RequestedParameters);
	tmp = mpt->mpt_dev_page1[tgt];
	rv = mpt_write_cur_cfg_page(mpt, tgt,
	    &tmp.Header, sizeof(tmp), FALSE, 5000);
	if (rv) {
		mpt_prt(mpt, "mpt_update_spi_config: write cur page failed\n");
		return (-1);
	}
	return (0);
}

static void
mpt_calc_geometry(struct ccb_calc_geometry *ccg, int extended)
{
#if __FreeBSD_version >= 500000
	cam_calc_geometry(ccg, extended);
#else
	uint32_t size_mb;
	uint32_t secs_per_cylinder;

	if (ccg->block_size == 0) {
		ccg->ccb_h.status = CAM_REQ_INVALID;
		return;
	}
	size_mb = ccg->volume_size / ((1024L * 1024L) / ccg->block_size);
	if (size_mb > 1024 && extended) {
		ccg->heads = 255;
		ccg->secs_per_track = 63;
	} else {
		ccg->heads = 64;
		ccg->secs_per_track = 32;
	}
	secs_per_cylinder = ccg->heads * ccg->secs_per_track;
	ccg->cylinders = ccg->volume_size / secs_per_cylinder;
	ccg->ccb_h.status = CAM_REQ_CMP;
#endif
}

/****************************** Timeout Recovery ******************************/
static int
mpt_spawn_recovery_thread(struct mpt_softc *mpt)
{
	int error;

	error = mpt_kthread_create(mpt_recovery_thread, mpt,
	    &mpt->recovery_thread, /*flags*/0,
	    /*altstack*/0, "mpt_recovery%d", mpt->unit);
	return (error);
}

static void
mpt_terminate_recovery_thread(struct mpt_softc *mpt)
{
	if (mpt->recovery_thread == NULL) {
		return;
	}
	mpt->shutdwn_recovery = 1;
	wakeup(mpt);
	/*
	 * Sleep on a slightly different location
	 * for this interlock just for added safety.
	 */
	mpt_sleep(mpt, &mpt->recovery_thread, PUSER, "thtrm", 0);
}

static void
mpt_recovery_thread(void *arg)
{
	struct mpt_softc *mpt;

#if __FreeBSD_version >= 500000
	mtx_lock(&Giant);
#endif
	mpt = (struct mpt_softc *)arg;
	MPT_LOCK(mpt);
	for (;;) {
		if (TAILQ_EMPTY(&mpt->request_timeout_list) != 0) {
			if (mpt->shutdwn_recovery == 0) {
				mpt_sleep(mpt, mpt, PUSER, "idle", 0);
			}
		}
		if (mpt->shutdwn_recovery != 0) {
			break;
		}
		mpt_recover_commands(mpt);
	}
	mpt->recovery_thread = NULL;
	wakeup(&mpt->recovery_thread);
	MPT_UNLOCK(mpt);
#if __FreeBSD_version >= 500000
	mtx_unlock(&Giant);
#endif
	kthread_exit(0);
}

static int
mpt_scsi_send_tmf(struct mpt_softc *mpt, u_int type, u_int flags,
    u_int channel, u_int target, u_int lun, u_int abort_ctx, int sleep_ok)
{
	MSG_SCSI_TASK_MGMT *tmf_req;
	int		    error;

	/*
	 * Wait for any current TMF request to complete.
	 * We're only allowed to issue one TMF at a time.
	 */
	error = mpt_wait_req(mpt, mpt->tmf_req, REQ_STATE_FREE, REQ_STATE_FREE,
	    sleep_ok, MPT_TMF_MAX_TIMEOUT);
	if (error != 0) {
		mpt_reset(mpt, TRUE);
		return (ETIMEDOUT);
	}

	mpt_assign_serno(mpt, mpt->tmf_req);
	mpt->tmf_req->state = REQ_STATE_ALLOCATED|REQ_STATE_QUEUED;

	tmf_req = (MSG_SCSI_TASK_MGMT *)mpt->tmf_req->req_vbuf;
	memset(tmf_req, 0, sizeof(*tmf_req));
	tmf_req->TargetID = target;
	tmf_req->Bus = channel;
	tmf_req->ChainOffset = 0;
	tmf_req->Function = MPI_FUNCTION_SCSI_TASK_MGMT;
	tmf_req->Reserved = 0;
	tmf_req->TaskType = type;
	tmf_req->Reserved1 = 0;
	tmf_req->MsgFlags = flags;
	tmf_req->MsgContext =
	    htole32(mpt->tmf_req->index | scsi_tmf_handler_id);
	memset(&tmf_req->LUN, 0,
	    sizeof(tmf_req->LUN) + sizeof(tmf_req->Reserved2));
	if (lun > 256) {
		tmf_req->LUN[0] = 0x40 | ((lun >> 8) & 0x3f);
		tmf_req->LUN[1] = lun & 0xff;
	} else {
		tmf_req->LUN[1] = lun;
	}
	tmf_req->TaskMsgContext = abort_ctx;

	mpt_lprt(mpt, MPT_PRT_INFO,
	    "Issuing TMF %p:%u with MsgContext of 0x%x\n", mpt->tmf_req,
	    mpt->tmf_req->serno, tmf_req->MsgContext);
	if (mpt->verbose > MPT_PRT_DEBUG) {
		mpt_print_request(tmf_req);
	}

	KASSERT(mpt_req_on_pending_list(mpt, mpt->tmf_req) == 0,
	    ("mpt_scsi_send_tmf: tmf_req already on pending list"));
	TAILQ_INSERT_HEAD(&mpt->request_pending_list, mpt->tmf_req, links);
	error = mpt_send_handshake_cmd(mpt, sizeof(*tmf_req), tmf_req);
	if (error != MPT_OK) {
		mpt_reset(mpt, TRUE);
	}
	return (error);
}

/*
 * When a command times out, it is placed on the requeust_timeout_list
 * and we wake our recovery thread.  The MPT-Fusion architecture supports
 * only a single TMF operation at a time, so we serially abort/bdr, etc,
 * the timedout transactions.  The next TMF is issued either by the
 * completion handler of the current TMF waking our recovery thread,
 * or the TMF timeout handler causing a hard reset sequence.
 */
static void
mpt_recover_commands(struct mpt_softc *mpt)
{
	request_t	   *req;
	union ccb	   *ccb;
	int		    error;

	if (TAILQ_EMPTY(&mpt->request_timeout_list) != 0) {
		/*
		 * No work to do- leave.
		 */
		mpt_prt(mpt, "mpt_recover_commands: no requests.\n");
		return;
	}

	/*
	 * Flush any commands whose completion coincides with their timeout.
	 */
	mpt_intr(mpt);

	if (TAILQ_EMPTY(&mpt->request_timeout_list) != 0) {
		/*
		 * The timedout commands have already
		 * completed.  This typically means
		 * that either the timeout value was on
		 * the hairy edge of what the device
		 * requires or - more likely - interrupts
		 * are not happening.
		 */
		mpt_prt(mpt, "Timedout requests already complete. "
		    "Interrupts may not be functioning.\n");
		mpt_enable_ints(mpt);
		return;
	}

	/*
	 * We have no visibility into the current state of the
	 * controller, so attempt to abort the commands in the
	 * order they timed-out. For initiator commands, we
	 * depend on the reply handler pulling requests off
	 * the timeout list.
	 */
	while ((req = TAILQ_FIRST(&mpt->request_timeout_list)) != NULL) {
		uint16_t status;
		uint8_t response;
		MSG_REQUEST_HEADER *hdrp = req->req_vbuf;

		mpt_prt(mpt, "attempting to abort req %p:%u function %x\n",
		    req, req->serno, hdrp->Function);
		ccb = req->ccb;
		if (ccb == NULL) {
			mpt_prt(mpt, "null ccb in timed out request. "
			    "Resetting Controller.\n");
			mpt_reset(mpt, TRUE);
			continue;
		}
		mpt_set_ccb_status(ccb, CAM_CMD_TIMEOUT);

		/*
		 * Check to see if this is not an initiator command and
		 * deal with it differently if it is.
		 */
		switch (hdrp->Function) {
		case MPI_FUNCTION_SCSI_IO_REQUEST:
		case MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH:
			break;
		default:
			/*
			 * XXX: FIX ME: need to abort target assists...
			 */
			mpt_prt(mpt, "just putting it back on the pend q\n");
			TAILQ_REMOVE(&mpt->request_timeout_list, req, links);
			TAILQ_INSERT_HEAD(&mpt->request_pending_list, req,
			    links);
			continue;
		}

		error = mpt_scsi_send_tmf(mpt,
		    MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
		    0, 0, ccb->ccb_h.target_id, ccb->ccb_h.target_lun,
		    htole32(req->index | scsi_io_handler_id), TRUE);

		if (error != 0) {
			/*
			 * mpt_scsi_send_tmf hard resets on failure, so no
			 * need to do so here.  Our queue should be emptied
			 * by the hard reset.
			 */
			continue;
		}

		error = mpt_wait_req(mpt, mpt->tmf_req, REQ_STATE_DONE,
		    REQ_STATE_DONE, TRUE, 500);

		status = mpt->tmf_req->IOCStatus;
		response = mpt->tmf_req->ResponseCode;
		mpt->tmf_req->state = REQ_STATE_FREE;

		if (error != 0) {
			/*
			 * If we've errored out,, reset the controller.
			 */
			mpt_prt(mpt, "mpt_recover_commands: abort timed-out. "
			    "Resetting controller\n");
			mpt_reset(mpt, TRUE);
			continue;
		}

		if ((status & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) {
			mpt_prt(mpt, "mpt_recover_commands: IOC Status 0x%x. "
			    "Resetting controller.\n", status);
			mpt_reset(mpt, TRUE);
			continue;
		}

		if (response != MPI_SCSITASKMGMT_RSP_TM_SUCCEEDED &&
		    response != MPI_SCSITASKMGMT_RSP_TM_COMPLETE) {
			mpt_prt(mpt, "mpt_recover_commands: TMF Response 0x%x. "
			    "Resetting controller.\n", response);
			mpt_reset(mpt, TRUE);
			continue;
		}
		mpt_prt(mpt, "abort of req %p:%u completed\n", req, req->serno);
	}
}

/************************ Target Mode Support ****************************/
static void
mpt_fc_post_els(struct mpt_softc *mpt, request_t *req, int ioindex)
{
	MSG_LINK_SERVICE_BUFFER_POST_REQUEST *fc;
	PTR_SGE_TRANSACTION32 tep;
	PTR_SGE_SIMPLE32 se;
	bus_addr_t paddr;

	paddr = req->req_pbuf;
	paddr += MPT_RQSL(mpt);

	fc = req->req_vbuf;
	memset(fc, 0, MPT_REQUEST_AREA);
	fc->BufferCount = 1;
	fc->Function = MPI_FUNCTION_FC_LINK_SRVC_BUF_POST;
	fc->MsgContext = htole32(req->index | fc_els_handler_id);

	/*
	 * Okay, set up ELS buffer pointers. ELS buffer pointers
	 * consist of a TE SGL element (with details length of zero)
	 * followe by a SIMPLE SGL element which holds the address
	 * of the buffer.
	 */

	tep = (PTR_SGE_TRANSACTION32) &fc->SGL;

	tep->ContextSize = 4;
	tep->Flags = 0;
	tep->TransactionContext[0] = htole32(ioindex);

	se = (PTR_SGE_SIMPLE32) &tep->TransactionDetails[0];
	se->FlagsLength =
		MPI_SGE_FLAGS_HOST_TO_IOC	|
		MPI_SGE_FLAGS_SIMPLE_ELEMENT	|
		MPI_SGE_FLAGS_LAST_ELEMENT	|
		MPI_SGE_FLAGS_END_OF_LIST	|
		MPI_SGE_FLAGS_END_OF_BUFFER;
	se->FlagsLength <<= MPI_SGE_FLAGS_SHIFT;
	se->FlagsLength |= (MPT_NRFM(mpt) - MPT_RQSL(mpt));
	se->Address = (uint32_t) paddr;
	mpt_lprt(mpt, MPT_PRT_DEBUG,
	    "add ELS index %d ioindex %d for %p:%u\n",
	    req->index, ioindex, req, req->serno);
	KASSERT(((req->state & REQ_STATE_LOCKED) != 0),
	    ("mpt_fc_post_els: request not locked"));
	mpt_send_cmd(mpt, req);
}

static void
mpt_post_target_command(struct mpt_softc *mpt, request_t *req, int ioindex)
{
	PTR_MSG_TARGET_CMD_BUFFER_POST_REQUEST fc;
	PTR_CMD_BUFFER_DESCRIPTOR cb;
	bus_addr_t paddr;

	paddr = req->req_pbuf;
	paddr += MPT_RQSL(mpt);
	memset(req->req_vbuf, 0, MPT_REQUEST_AREA);
	MPT_TGT_STATE(mpt, req)->state = TGT_STATE_LOADING;

	fc = req->req_vbuf;
	fc->BufferCount = 1;
	fc->Function = MPI_FUNCTION_TARGET_CMD_BUFFER_POST;
	fc->MsgContext = htole32(req->index | mpt->scsi_tgt_handler_id);

	cb = &fc->Buffer[0];
	cb->IoIndex = htole16(ioindex);
	cb->u.PhysicalAddress32 = (U32) paddr;

	mpt_check_doorbell(mpt);
	mpt_send_cmd(mpt, req);
}

static int
mpt_add_els_buffers(struct mpt_softc *mpt)
{
	int i;

	if (mpt->is_fc == 0) {
		return (TRUE);
	}

	if (mpt->els_cmds_allocated) {
		return (TRUE);
	}

	mpt->els_cmd_ptrs = malloc(MPT_MAX_ELS * sizeof (request_t *),
	    M_DEVBUF, M_NOWAIT | M_ZERO);

	if (mpt->els_cmd_ptrs == NULL) {
		return (FALSE);
	}

	/*
	 * Feed the chip some ELS buffer resources
	 */
	for (i = 0; i < MPT_MAX_ELS; i++) {
		request_t *req = mpt_get_request(mpt, FALSE);
		if (req == NULL) {
			break;
		}
		req->state |= REQ_STATE_LOCKED;
		mpt->els_cmd_ptrs[i] = req;
		mpt_fc_post_els(mpt, req, i);
	}

	if (i == 0) {
		mpt_prt(mpt, "unable to add ELS buffer resources\n");
		free(mpt->els_cmd_ptrs, M_DEVBUF);
		mpt->els_cmd_ptrs = NULL;
		return (FALSE);
	}
	if (i != MPT_MAX_ELS) {
		mpt_lprt(mpt, MPT_PRT_INFO,
		    "only added %d of %d  ELS buffers\n", i, MPT_MAX_ELS);
	}
	mpt->els_cmds_allocated = i;
	return(TRUE);
}

static int
mpt_add_target_commands(struct mpt_softc *mpt)
{
	int i, max;

	if (mpt->tgt_cmd_ptrs) {
		return (TRUE);
	}

	max = MPT_MAX_REQUESTS(mpt) >> 1;
	if (max > mpt->mpt_max_tgtcmds) {
		max = mpt->mpt_max_tgtcmds;
	}
	mpt->tgt_cmd_ptrs =
	    malloc(max * sizeof (request_t *), M_DEVBUF, M_NOWAIT | M_ZERO);
	if (mpt->tgt_cmd_ptrs == NULL) {
		mpt_prt(mpt,
		    "mpt_add_target_commands: could not allocate cmd ptrs\n");
		return (FALSE);
	}

	for (i = 0; i < max; i++) {
		request_t *req;

		req = mpt_get_request(mpt, FALSE);
		if (req == NULL) {
			break;
		}
		req->state |= REQ_STATE_LOCKED;
		mpt->tgt_cmd_ptrs[i] = req;
		mpt_post_target_command(mpt, req, i);
	}


	if (i == 0) {
		mpt_lprt(mpt, MPT_PRT_ERROR, "could not add any target bufs\n");
		free(mpt->tgt_cmd_ptrs, M_DEVBUF);
		mpt->tgt_cmd_ptrs = NULL;
		return (FALSE);
	}

	mpt->tgt_cmds_allocated = i;

	if (i < max) {
		mpt_lprt(mpt, MPT_PRT_INFO,
		    "added %d of %d target bufs\n", i, max);
	}
	return (i);
}

static int
mpt_enable_lun(struct mpt_softc *mpt, target_id_t tgt, lun_id_t lun)
{
	if (tgt == CAM_TARGET_WILDCARD && lun == CAM_LUN_WILDCARD) {
		mpt->twildcard = 1;
	} else if (lun >= MPT_MAX_LUNS) {
		return (EINVAL);
	} else if (tgt != CAM_TARGET_WILDCARD && tgt != 0) {
		return (EINVAL);
	}
	if (mpt->tenabled == 0) {
		if (mpt->is_fc) {
			(void) mpt_fc_reset_link(mpt, 0);
		}
		mpt->tenabled = 1;
	}
	if (lun == CAM_LUN_WILDCARD) {
		mpt->trt_wildcard.enabled = 1;
	} else {
		mpt->trt[lun].enabled = 1;
	}
	return (0);
}

static int
mpt_disable_lun(struct mpt_softc *mpt, target_id_t tgt, lun_id_t lun)
{
	int i;
	if (tgt == CAM_TARGET_WILDCARD && lun == CAM_LUN_WILDCARD) {
		mpt->twildcard = 0;
	} else if (lun >= MPT_MAX_LUNS) {
		return (EINVAL);
	} else if (tgt != CAM_TARGET_WILDCARD && tgt != 0) {
		return (EINVAL);
	}
	if (lun == CAM_LUN_WILDCARD) {
		mpt->trt_wildcard.enabled = 0;
	} else {
		mpt->trt[lun].enabled = 0;
	}
	for (i = 0; i < MPT_MAX_LUNS; i++) {
		if (mpt->trt[lun].enabled) {
			break;
		}
	}
	if (i == MPT_MAX_LUNS && mpt->twildcard == 0) {
		if (mpt->is_fc) {
			(void) mpt_fc_reset_link(mpt, 0);
		}
		mpt->tenabled = 0;
	}
	return (0);
}

/*
 * Called with MPT lock held
 */
static void
mpt_target_start_io(struct mpt_softc *mpt, union ccb *ccb)
{
	struct ccb_scsiio *csio = &ccb->csio;
	request_t *cmd_req = MPT_TAG_2_REQ(mpt, csio->tag_id);
	mpt_tgt_state_t *tgt = MPT_TGT_STATE(mpt, cmd_req);

	switch (tgt->state) {
	case TGT_STATE_IN_CAM:
		break;
	case TGT_STATE_MOVING_DATA:
		mpt_set_ccb_status(ccb, CAM_REQUEUE_REQ);
		xpt_freeze_simq(mpt->sim, 1);
		ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
		tgt->ccb->ccb_h.status |= CAM_RELEASE_SIMQ;
		MPTLOCK_2_CAMLOCK(mpt);
		xpt_done(ccb);
		CAMLOCK_2_MPTLOCK(mpt);
		return;
	default:
		mpt_prt(mpt, "ccb %p flags 0x%x tag 0x%08x had bad request "
		    "starting I/O\n", ccb, csio->ccb_h.flags, csio->tag_id);
		mpt_tgt_dump_req_state(mpt, cmd_req);
		mpt_set_ccb_status(ccb, CAM_REQ_CMP_ERR);
		MPTLOCK_2_CAMLOCK(mpt);
		xpt_done(ccb);
		CAMLOCK_2_MPTLOCK(mpt);
		return;
	}

	if (csio->dxfer_len) {
		bus_dmamap_callback_t *cb;
		PTR_MSG_TARGET_ASSIST_REQUEST ta;
		request_t *req;

		KASSERT((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE,
		    ("dxfer_len %u but direction is NONE\n", csio->dxfer_len));

		if ((req = mpt_get_request(mpt, FALSE)) == NULL) {
			if (mpt->outofbeer == 0) {
				mpt->outofbeer = 1;
				xpt_freeze_simq(mpt->sim, 1);
				mpt_lprt(mpt, MPT_PRT_DEBUG, "FREEZEQ\n");
			}
			ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
			mpt_set_ccb_status(ccb, CAM_REQUEUE_REQ);
			MPTLOCK_2_CAMLOCK(mpt);
			xpt_done(ccb);
			CAMLOCK_2_MPTLOCK(mpt);
			return;
		}
		ccb->ccb_h.status = CAM_SIM_QUEUED | CAM_REQ_INPROG;
		if (sizeof (bus_addr_t) > 4) {
			cb = mpt_execute_req_a64;
		} else {
			cb = mpt_execute_req;
		}

		req->ccb = ccb;
		ccb->ccb_h.ccb_req_ptr = req;

		/*
		 * Record the currently active ccb and the
		 * request for it in our target state area.
		 */
		tgt->ccb = ccb;
		tgt->req = req;

		memset(req->req_vbuf, 0, MPT_RQSL(mpt));
		ta = req->req_vbuf;

		if (mpt->is_sas) {
			PTR_MPI_TARGET_SSP_CMD_BUFFER ssp =
			     cmd_req->req_vbuf;
			ta->QueueTag = ssp->InitiatorTag;
		} else if (mpt->is_spi) {
			PTR_MPI_TARGET_SCSI_SPI_CMD_BUFFER sp =
			     cmd_req->req_vbuf;
			ta->QueueTag = sp->Tag;
		}
		ta->Function = MPI_FUNCTION_TARGET_ASSIST;
		ta->MsgContext = htole32(req->index | mpt->scsi_tgt_handler_id);
		ta->ReplyWord = htole32(tgt->reply_desc);
		if (csio->ccb_h.target_lun > 256) {
			ta->LUN[0] =
			    0x40 | ((csio->ccb_h.target_lun >> 8) & 0x3f);
			ta->LUN[1] = csio->ccb_h.target_lun & 0xff;
		} else {
			ta->LUN[1] = csio->ccb_h.target_lun;
		}

		ta->RelativeOffset = tgt->bytes_xfered;
		ta->DataLength = ccb->csio.dxfer_len;
		if (ta->DataLength > tgt->resid) {
			ta->DataLength = tgt->resid;
		}

		/*
		 * XXX Should be done after data transfer completes?
		 */
		tgt->resid -= csio->dxfer_len;
		tgt->bytes_xfered += csio->dxfer_len;

		if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
			ta->TargetAssistFlags |=
			    TARGET_ASSIST_FLAGS_DATA_DIRECTION;
		}

#ifdef	WE_TRUST_AUTO_GOOD_STATUS
		if ((ccb->ccb_h.flags & CAM_SEND_STATUS) &&
		    csio->scsi_status == SCSI_STATUS_OK && tgt->resid == 0) {
			ta->TargetAssistFlags |=
			    TARGET_ASSIST_FLAGS_AUTO_STATUS;
		}
#endif
		tgt->state = TGT_STATE_SETTING_UP_FOR_DATA;

		mpt_lprt(mpt, MPT_PRT_DEBUG, 
		    "DATA_CCB %p tag %x %u bytes %u resid flg %x req %p:%u "
		    "nxtstate=%d\n", csio, csio->tag_id, csio->dxfer_len,
		    tgt->resid, ccb->ccb_h.flags, req, req->serno, tgt->state);

		MPTLOCK_2_CAMLOCK(mpt);
		if ((ccb->ccb_h.flags & CAM_SCATTER_VALID) == 0) {
			if ((ccb->ccb_h.flags & CAM_DATA_PHYS) == 0) {
				int error;
				int s = splsoftvm();
				error = bus_dmamap_load(mpt->buffer_dmat,
				    req->dmap, csio->data_ptr, csio->dxfer_len,
				    cb, req, 0);
				splx(s);
				if (error == EINPROGRESS) {
					xpt_freeze_simq(mpt->sim, 1);
					ccb->ccb_h.status |= CAM_RELEASE_SIMQ;
				}
			} else {
				/*
				 * We have been given a pointer to single
				 * physical buffer.
				 */
				struct bus_dma_segment seg;
				seg.ds_addr = (bus_addr_t)
				    (vm_offset_t)csio->data_ptr;
				seg.ds_len = csio->dxfer_len;
				(*cb)(req, &seg, 1, 0);
			}
		} else {
			/*
			 * We have been given a list of addresses.
			 * This case could be easily supported but they are not
			 * currently generated by the CAM subsystem so there
			 * is no point in wasting the time right now.
			 */
			struct bus_dma_segment *sgs;
			if ((ccb->ccb_h.flags & CAM_SG_LIST_PHYS) == 0) {
				(*cb)(req, NULL, 0, EFAULT);
			} else {
				/* Just use the segments provided */
				sgs = (struct bus_dma_segment *)csio->data_ptr;
				(*cb)(req, sgs, csio->sglist_cnt, 0);
			}
		}
		CAMLOCK_2_MPTLOCK(mpt);
	} else {
		uint8_t *sp = NULL, sense[MPT_SENSE_SIZE];

		/*
		 * XXX: I don't know why this seems to happen, but
		 * XXX: completing the CCB seems to make things happy.
		 * XXX: This seems to happen if the initiator requests
		 * XXX: enough data that we have to do multiple CTIOs.
		 */
		if ((ccb->ccb_h.flags & CAM_SEND_STATUS) == 0) {
			mpt_lprt(mpt, MPT_PRT_DEBUG,
			    "Meaningless STATUS CCB (%p): flags %x status %x "
			    "resid %d bytes_xfered %u\n", ccb, ccb->ccb_h.flags,
			    ccb->ccb_h.status, tgt->resid, tgt->bytes_xfered);
			mpt_set_ccb_status(ccb, CAM_REQ_CMP);
			ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
			MPTLOCK_2_CAMLOCK(mpt);
			xpt_done(ccb);
			CAMLOCK_2_MPTLOCK(mpt);
			return;
		}
		if (ccb->ccb_h.flags & CAM_SEND_SENSE) {
			sp = sense;
			memcpy(sp, &csio->sense_data,
			   min(csio->sense_len, MPT_SENSE_SIZE));
		}
		mpt_scsi_tgt_status(mpt, ccb, cmd_req, csio->scsi_status, sp);
	}
}

static void
mpt_scsi_tgt_local(struct mpt_softc *mpt, request_t *cmd_req,
    uint32_t lun, int send, uint8_t *data, size_t length)
{
	mpt_tgt_state_t *tgt;
	PTR_MSG_TARGET_ASSIST_REQUEST ta;
	SGE_SIMPLE32 *se;
	uint32_t flags;
	uint8_t *dptr;
	bus_addr_t pptr;
	request_t *req;

	if (length == 0) {
		mpt_scsi_tgt_status(mpt, NULL, cmd_req, 0, NULL);
		return;
	}

	tgt = MPT_TGT_STATE(mpt, cmd_req);
	if ((req = mpt_get_request(mpt, FALSE)) == NULL) {
		mpt_prt(mpt, "out of resources- dropping local response\n");
		return;
	}
	tgt->is_local = 1;


	memset(req->req_vbuf, 0, MPT_RQSL(mpt));
	ta = req->req_vbuf;

	if (mpt->is_sas) {
		PTR_MPI_TARGET_SSP_CMD_BUFFER ssp = cmd_req->req_vbuf;
		ta->QueueTag = ssp->InitiatorTag;
	} else if (mpt->is_spi) {
		PTR_MPI_TARGET_SCSI_SPI_CMD_BUFFER sp = cmd_req->req_vbuf;
		ta->QueueTag = sp->Tag;
	}
	ta->Function = MPI_FUNCTION_TARGET_ASSIST;
	ta->MsgContext = htole32(req->index | mpt->scsi_tgt_handler_id);
	ta->ReplyWord = htole32(tgt->reply_desc);
	if (lun > 256) {
		ta->LUN[0] = 0x40 | ((lun >> 8) & 0x3f);
		ta->LUN[1] = lun & 0xff;
	} else {
		ta->LUN[1] = lun;
	}
	ta->RelativeOffset = 0;
	ta->DataLength = length;

	dptr = req->req_vbuf;
	dptr += MPT_RQSL(mpt);
	pptr = req->req_pbuf;
	pptr += MPT_RQSL(mpt);
	memcpy(dptr, data, min(length, MPT_RQSL(mpt)));

	se = (SGE_SIMPLE32 *) &ta->SGL[0];
	memset(se, 0,sizeof (*se));

	flags = MPI_SGE_FLAGS_SIMPLE_ELEMENT;
	if (send) {
		ta->TargetAssistFlags |= TARGET_ASSIST_FLAGS_DATA_DIRECTION;
		flags |= MPI_SGE_FLAGS_HOST_TO_IOC;
	}
	se->Address = pptr;
	MPI_pSGE_SET_LENGTH(se, length);
	flags |= MPI_SGE_FLAGS_LAST_ELEMENT;
	flags |= MPI_SGE_FLAGS_END_OF_LIST | MPI_SGE_FLAGS_END_OF_BUFFER;
	MPI_pSGE_SET_FLAGS(se, flags);

	tgt->ccb = NULL;
	tgt->req = req;
	tgt->resid = 0;
	tgt->bytes_xfered = length;
#ifdef	WE_TRUST_AUTO_GOOD_STATUS
	tgt->state = TGT_STATE_MOVING_DATA_AND_STATUS;
#else
	tgt->state = TGT_STATE_MOVING_DATA;
#endif
	mpt_send_cmd(mpt, req);
}

/*
 * Abort queued up CCBs
 */
static cam_status
mpt_abort_target_ccb(struct mpt_softc *mpt, union ccb *ccb)
{
	struct mpt_hdr_stailq *lp;
	struct ccb_hdr *srch;
	int found = 0;
	union ccb *accb = ccb->cab.abort_ccb;
	tgt_resource_t *trtp;

	mpt_lprt(mpt, MPT_PRT_DEBUG, "aborting ccb %p\n", accb);

	if (ccb->ccb_h.target_lun == CAM_LUN_WILDCARD) {
		trtp = &mpt->trt_wildcard;
	} else {
		trtp = &mpt->trt[ccb->ccb_h.target_lun];
	}

	if (accb->ccb_h.func_code == XPT_ACCEPT_TARGET_IO) {
		lp = &trtp->atios;
	} else if (accb->ccb_h.func_code == XPT_IMMED_NOTIFY) {
		lp = &trtp->inots;
	} else {
		return (CAM_REQ_INVALID);
	}

	STAILQ_FOREACH(srch, lp, sim_links.stqe) {
		if (srch == &accb->ccb_h) {
			found = 1;
			STAILQ_REMOVE(lp, srch, ccb_hdr, sim_links.stqe);
			break;
		}
	}
	if (found) {
		accb->ccb_h.status = CAM_REQ_ABORTED;
		xpt_done(accb);
		return (CAM_REQ_CMP);
	}
	mpt_prt(mpt, "mpt_abort_tgt_ccb: CCB %p not found\n", ccb);
	return (CAM_PATH_INVALID);
}

/*
 * Ask the MPT to abort the current target command
 */ 
static int
mpt_abort_target_cmd(struct mpt_softc *mpt, request_t *cmd_req)
{
	int error;
	request_t *req;
	PTR_MSG_TARGET_MODE_ABORT abtp;

	req = mpt_get_request(mpt, FALSE);
	if (req == NULL) {
		return (-1);
	}
	abtp = req->req_vbuf;
	memset(abtp, 0, sizeof (*abtp));

	abtp->MsgContext = htole32(req->index | mpt->scsi_tgt_handler_id);
	abtp->AbortType = TARGET_MODE_ABORT_TYPE_EXACT_IO;
	abtp->Function = MPI_FUNCTION_TARGET_MODE_ABORT;
	abtp->ReplyWord = htole32(MPT_TGT_STATE(mpt, cmd_req)->reply_desc);
	error = 0;
	if (mpt->is_fc || mpt->is_sas) {
		mpt_send_cmd(mpt, req);
	} else {
		error = mpt_send_handshake_cmd(mpt, sizeof(*req), req);
	}
	return (error);
}

/*
 * WE_TRUST_AUTO_GOOD_STATUS- I've found that setting 
 * TARGET_STATUS_SEND_FLAGS_AUTO_GOOD_STATUS leads the
 * FC929 to set bogus FC_RSP fields (nonzero residuals
 * but w/o RESID fields set). This causes QLogic initiators
 * to think maybe that a frame was lost.
 *
 * WE_CAN_USE_AUTO_REPOST- we can't use AUTO_REPOST because
 * we use allocated requests to do TARGET_ASSIST and we
 * need to know when to release them.
 */

static void
mpt_scsi_tgt_status(struct mpt_softc *mpt, union ccb *ccb, request_t *cmd_req,
    uint8_t status, uint8_t const *sense_data)
{
	uint8_t *cmd_vbuf;
	mpt_tgt_state_t *tgt;
	PTR_MSG_TARGET_STATUS_SEND_REQUEST tp;
	request_t *req;
	bus_addr_t paddr;
	int resplen = 0;

	cmd_vbuf = cmd_req->req_vbuf;
	cmd_vbuf += MPT_RQSL(mpt);
	tgt = MPT_TGT_STATE(mpt, cmd_req);

	if ((req = mpt_get_request(mpt, FALSE)) == NULL) {
		if (mpt->outofbeer == 0) {
			mpt->outofbeer = 1;
			xpt_freeze_simq(mpt->sim, 1);
			mpt_lprt(mpt, MPT_PRT_DEBUG, "FREEZEQ\n");
		}
		if (ccb) {
			ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
			mpt_set_ccb_status(ccb, CAM_REQUEUE_REQ);
			MPTLOCK_2_CAMLOCK(mpt);
			xpt_done(ccb);
			CAMLOCK_2_MPTLOCK(mpt);
		} else {
			mpt_prt(mpt,
			    "could not allocate status request- dropping\n");
		}
		return;
	}
	req->ccb = ccb;
	if (ccb) {
		ccb->ccb_h.ccb_mpt_ptr = mpt;
		ccb->ccb_h.ccb_req_ptr = req;
	}

	/*
	 * Record the currently active ccb, if any, and the
	 * request for it in our target state area.
	 */
	tgt->ccb = ccb;
	tgt->req = req;
	tgt->state = TGT_STATE_SENDING_STATUS;

	tp = req->req_vbuf;
	paddr = req->req_pbuf;
	paddr += MPT_RQSL(mpt);

	memset(tp, 0, sizeof (*tp));
	tp->Function = MPI_FUNCTION_TARGET_STATUS_SEND;
	if (mpt->is_fc) {
		PTR_MPI_TARGET_FCP_CMD_BUFFER fc =
		    (PTR_MPI_TARGET_FCP_CMD_BUFFER) cmd_vbuf;
		uint8_t *sts_vbuf;
		uint32_t *rsp;

		sts_vbuf = req->req_vbuf;
		sts_vbuf += MPT_RQSL(mpt);
		rsp = (uint32_t *) sts_vbuf;
		memcpy(tp->LUN, fc->FcpLun, sizeof (tp->LUN));

		/*
		 * The MPI_TARGET_FCP_RSP_BUFFER define is unfortunate.
		 * It has to be big-endian in memory and is organized
		 * in 32 bit words, which are much easier to deal with
		 * as words which are swizzled as needed.
		 *
		 * All we're filling here is the FC_RSP payload.
		 * We may just have the chip synthesize it if
		 * we have no residual and an OK status.
		 *
		 */
		memset(rsp, 0, sizeof (MPI_TARGET_FCP_RSP_BUFFER));

		rsp[2] = status;
		if (tgt->resid) {
			rsp[2] |= 0x800;	/* XXXX NEED MNEMONIC!!!! */
			rsp[3] = htobe32(tgt->resid);
#ifdef	WE_TRUST_AUTO_GOOD_STATUS
			resplen = sizeof (MPI_TARGET_FCP_RSP_BUFFER);
#endif
		}
		if (status == SCSI_STATUS_CHECK_COND) {
			int i;

			rsp[2] |= 0x200;	/* XXXX NEED MNEMONIC!!!! */
			rsp[4] = htobe32(MPT_SENSE_SIZE);
			if (sense_data) {
				memcpy(&rsp[8], sense_data, MPT_SENSE_SIZE);
			} else {
				mpt_prt(mpt, "mpt_scsi_tgt_status: CHECK CONDI"
				    "TION but no sense data?\n");
				memset(&rsp, 0, MPT_SENSE_SIZE);
			}
			for (i = 8; i < (8 + (MPT_SENSE_SIZE >> 2)); i++) {
				rsp[i] = htobe32(rsp[i]);
			}
#ifdef	WE_TRUST_AUTO_GOOD_STATUS
			resplen = sizeof (MPI_TARGET_FCP_RSP_BUFFER);
#endif
		}
#ifndef	WE_TRUST_AUTO_GOOD_STATUS
		resplen = sizeof (MPI_TARGET_FCP_RSP_BUFFER);
#endif
		rsp[2] = htobe32(rsp[2]);
	} else if (mpt->is_sas) {
		PTR_MPI_TARGET_SSP_CMD_BUFFER ssp =
		    (PTR_MPI_TARGET_SSP_CMD_BUFFER) cmd_vbuf;
		memcpy(tp->LUN, ssp->LogicalUnitNumber, sizeof (tp->LUN));
	} else {
		PTR_MPI_TARGET_SCSI_SPI_CMD_BUFFER sp =
		    (PTR_MPI_TARGET_SCSI_SPI_CMD_BUFFER) cmd_vbuf;
		tp->StatusCode = status;
		tp->QueueTag = htole16(sp->Tag);
		memcpy(tp->LUN, sp->LogicalUnitNumber, sizeof (tp->LUN));
	}

	tp->ReplyWord = htole32(tgt->reply_desc);
	tp->MsgContext = htole32(req->index | mpt->scsi_tgt_handler_id);

#ifdef	WE_CAN_USE_AUTO_REPOST
	tp->MsgFlags = TARGET_STATUS_SEND_FLAGS_REPOST_CMD_BUFFER;
#endif
	if (status == SCSI_STATUS_OK && resplen == 0) {
		tp->MsgFlags |= TARGET_STATUS_SEND_FLAGS_AUTO_GOOD_STATUS;
	} else {
		tp->StatusDataSGE.u.Address32 = (uint32_t) paddr;
		tp->StatusDataSGE.FlagsLength =
			MPI_SGE_FLAGS_HOST_TO_IOC	|
			MPI_SGE_FLAGS_SIMPLE_ELEMENT	|
			MPI_SGE_FLAGS_LAST_ELEMENT	|
			MPI_SGE_FLAGS_END_OF_LIST	|
			MPI_SGE_FLAGS_END_OF_BUFFER;
		tp->StatusDataSGE.FlagsLength <<= MPI_SGE_FLAGS_SHIFT;
		tp->StatusDataSGE.FlagsLength |= resplen;
	}

	mpt_lprt(mpt, MPT_PRT_DEBUG, 
	    "STATUS_CCB %p (wit%s sense) tag %x req %p:%u resid %u\n",
	    ccb, sense_data?"h" : "hout", ccb? ccb->csio.tag_id : -1, req,
	    req->serno, tgt->resid);
	if (ccb) {
		ccb->ccb_h.status = CAM_SIM_QUEUED | CAM_REQ_INPROG;
		ccb->ccb_h.timeout_ch = timeout(mpt_timeout, ccb, 60 * hz);
	}
	mpt_send_cmd(mpt, req);
}

static void
mpt_scsi_tgt_tsk_mgmt(struct mpt_softc *mpt, request_t *req, mpt_task_mgmt_t fc,
    tgt_resource_t *trtp, int init_id)
{
	struct ccb_immed_notify *inot;
	mpt_tgt_state_t *tgt;

	tgt = MPT_TGT_STATE(mpt, req);
	inot = (struct ccb_immed_notify *) STAILQ_FIRST(&trtp->inots);
	if (inot == NULL) {
		mpt_lprt(mpt, MPT_PRT_WARN, "no INOTSs- sending back BSY\n");
		mpt_scsi_tgt_status(mpt, NULL, req, SCSI_STATUS_BUSY, NULL);
		return;
	}
	STAILQ_REMOVE_HEAD(&trtp->inots, sim_links.stqe);
	mpt_lprt(mpt, MPT_PRT_DEBUG1,
	    "Get FREE INOT %p lun %d\n", inot, inot->ccb_h.target_lun);

	memset(&inot->sense_data, 0, sizeof (inot->sense_data));
	inot->sense_len = 0;
	memset(inot->message_args, 0, sizeof (inot->message_args));
	inot->initiator_id = init_id;	/* XXX */

	/*
	 * This is a somewhat grotesque attempt to map from task management
	 * to old style SCSI messages. God help us all.
	 */
	switch (fc) {
	case MPT_ABORT_TASK_SET:
		inot->message_args[0] = MSG_ABORT_TAG;
		break;
	case MPT_CLEAR_TASK_SET:
		inot->message_args[0] = MSG_CLEAR_TASK_SET;
		break;
	case MPT_TARGET_RESET:
		inot->message_args[0] = MSG_TARGET_RESET;
		break;
	case MPT_CLEAR_ACA:
		inot->message_args[0] = MSG_CLEAR_ACA;
		break;
	case MPT_TERMINATE_TASK:
		inot->message_args[0] = MSG_ABORT_TAG;
		break;
	default:
		inot->message_args[0] = MSG_NOOP;
		break;
	}
	tgt->ccb = (union ccb *) inot;
	inot->ccb_h.status = CAM_MESSAGE_RECV|CAM_DEV_QFRZN;
	MPTLOCK_2_CAMLOCK(mpt);
	xpt_done((union ccb *)inot);
	CAMLOCK_2_MPTLOCK(mpt);
}

static void
mpt_scsi_tgt_atio(struct mpt_softc *mpt, request_t *req, uint32_t reply_desc)
{
	struct ccb_accept_tio *atiop;
	lun_id_t lun;
	int tag_action = 0;
	mpt_tgt_state_t *tgt;
	tgt_resource_t *trtp = NULL;
	U8 *lunptr;
	U8 *vbuf;
	U16 itag;
	U16 ioindex;
	mpt_task_mgmt_t fct = MPT_NIL_TMT_VALUE;
	uint8_t *cdbp;

	/*
	 * First, DMA sync the received command-
	 * which is in the *request* * phys area.
	 *
	 * XXX: We could optimize this for a range
	 */
	bus_dmamap_sync(mpt->request_dmat, mpt->request_dmap,
	    BUS_DMASYNC_POSTREAD);

	/*
	 * Stash info for the current command where we can get at it later.
	 */
	vbuf = req->req_vbuf;
	vbuf += MPT_RQSL(mpt);

	/*
	 * Get our state pointer set up.
	 */
	tgt = MPT_TGT_STATE(mpt, req);
	if (tgt->state != TGT_STATE_LOADED) {
		mpt_tgt_dump_req_state(mpt, req);
		panic("bad target state in mpt_scsi_tgt_atio");
	}
	memset(tgt, 0, sizeof (mpt_tgt_state_t));
	tgt->state = TGT_STATE_IN_CAM;
	tgt->reply_desc = reply_desc;
	ioindex = GET_IO_INDEX(reply_desc);

	if (mpt->is_fc) {
		PTR_MPI_TARGET_FCP_CMD_BUFFER fc;
		fc = (PTR_MPI_TARGET_FCP_CMD_BUFFER) vbuf;
		if (fc->FcpCntl[2]) {
			/*
			 * Task Management Request
			 */
			switch (fc->FcpCntl[2]) {
			case 0x2:
				fct = MPT_ABORT_TASK_SET;
				break;
			case 0x4:
				fct = MPT_CLEAR_TASK_SET;
				break;
			case 0x20:
				fct = MPT_TARGET_RESET;
				break;
			case 0x40:
				fct = MPT_CLEAR_ACA;
				break;
			case 0x80:
				fct = MPT_TERMINATE_TASK;
				break;
			default:
				mpt_prt(mpt, "CORRUPTED TASK MGMT BITS: 0x%x\n",
				    fc->FcpCntl[2]);
				mpt_scsi_tgt_status(mpt, 0, req,
				    SCSI_STATUS_OK, 0);
				return;
			}
		} else {
			switch (fc->FcpCntl[1]) {
			case 0:
				tag_action = MSG_SIMPLE_Q_TAG;
				break;
			case 1:
				tag_action = MSG_HEAD_OF_Q_TAG;
				break;
			case 2:
				tag_action = MSG_ORDERED_Q_TAG;
				break;
			default:
				/*
				 * Bah. Ignore Untagged Queing and ACA
				 */
				tag_action = MSG_SIMPLE_Q_TAG;
				break;
			}
		}
		tgt->resid = be32toh(fc->FcpDl);
		cdbp = fc->FcpCdb;
		lunptr = fc->FcpLun;
		itag = be16toh(fc->OptionalOxid);
	} else if (mpt->is_sas) {
		PTR_MPI_TARGET_SSP_CMD_BUFFER ssp;
		ssp = (PTR_MPI_TARGET_SSP_CMD_BUFFER) vbuf;
		cdbp = ssp->CDB;
		lunptr = ssp->LogicalUnitNumber;
		itag = ssp->InitiatorTag;
	} else {
		PTR_MPI_TARGET_SCSI_SPI_CMD_BUFFER sp;
		sp = (PTR_MPI_TARGET_SCSI_SPI_CMD_BUFFER) vbuf;
		cdbp = sp->CDB;
		lunptr = sp->LogicalUnitNumber;
		itag = sp->Tag;
	}

	/*
	 * Generate a simple lun
	 */
	switch (lunptr[0] & 0xc0) {
	case 0x40:
		lun = ((lunptr[0] & 0x3f) << 8) | lunptr[1];
		break;
	case 0:
		lun = lunptr[1];
		break;
	default:
		mpt_lprt(mpt, MPT_PRT_ERROR, "cannot handle this type lun\n");
		lun = 0xffff;
		break;
	}

	/*
	 * Deal with non-enabled or bad luns here.
	 */
	if (lun >= MPT_MAX_LUNS || mpt->tenabled == 0 ||
	    mpt->trt[lun].enabled == 0) {
		if (mpt->twildcard) {
			trtp = &mpt->trt_wildcard;
		} else if (fct == MPT_NIL_TMT_VALUE) {
			/*
			 * In this case, we haven't got an upstream listener
			 * for either a specific lun or wildcard luns. We
			 * have to make some sensible response. For regular
			 * inquiry, just return some NOT HERE inquiry data.
			 * For VPD inquiry, report illegal field in cdb.
			 * For REQUEST SENSE, just return NO SENSE data.
			 * REPORT LUNS gets illegal command.
			 * All other commands get 'no such device'.
			 */

			uint8_t *sp, cond, buf[MPT_SENSE_SIZE];

			mpt_prt(mpt, "CMD 0x%x to unmanaged lun %u\n",
			    cdbp[0], lun);

			memset(buf, 0, MPT_SENSE_SIZE);
			cond = SCSI_STATUS_CHECK_COND;
			buf[0] = 0xf0;
			buf[2] = 0x5;
			buf[7] = 0x8;
			sp = buf;
			tgt->tag_id = MPT_MAKE_TAGID(mpt, req, ioindex);

			switch (cdbp[0]) {
			case INQUIRY:
			{
				static uint8_t iqd[8] = {
				    0x7f, 0x0, 0x4, 0x12, 0x0
				};
				if (cdbp[1] != 0) {
					buf[12] = 0x26;
					buf[13] = 0x01;
					break;
				}
				mpt_prt(mpt, "local inquiry\n");
				mpt_scsi_tgt_local(mpt, req, lun, 1,
				    iqd, sizeof (iqd));
				return;
			}
			case REQUEST_SENSE:
			{
				buf[2] = 0x0;
				mpt_prt(mpt, "local request sense\n");
				mpt_scsi_tgt_local(mpt, req, lun, 1,
				    buf, sizeof (buf));
				return;
			}
			case REPORT_LUNS:
				buf[12] = 0x26;
				break;
			default:
				buf[12] = 0x25;
				break;
			}
			mpt_scsi_tgt_status(mpt, NULL, req, cond, sp);
			return;
		}
		/* otherwise, leave trtp NULL */
	} else {
		trtp = &mpt->trt[lun];
	}

	/*
	 * Deal with any task management
	 */
	if (fct != MPT_NIL_TMT_VALUE) {
		if (trtp == NULL) {
			mpt_prt(mpt, "task mgmt function %x but no listener\n",
			    fct);
			mpt_scsi_tgt_status(mpt, 0, req,
			    SCSI_STATUS_OK, 0);
		} else {
			mpt_scsi_tgt_tsk_mgmt(mpt, req, fct, trtp,
			    GET_INITIATOR_INDEX(reply_desc));
		}
		return;
	}


	atiop = (struct ccb_accept_tio *) STAILQ_FIRST(&trtp->atios);
	if (atiop == NULL) {
		mpt_lprt(mpt, MPT_PRT_WARN,
		    "no ATIOs for lun %u- sending back %s\n", lun,
		    mpt->tenabled? "QUEUE FULL" : "BUSY");
		mpt_scsi_tgt_status(mpt, NULL, req,
		    mpt->tenabled? SCSI_STATUS_QUEUE_FULL : SCSI_STATUS_BUSY,
		    NULL);
		return;
	}
	STAILQ_REMOVE_HEAD(&trtp->atios, sim_links.stqe);
	mpt_lprt(mpt, MPT_PRT_DEBUG1,
	    "Get FREE ATIO %p lun %d\n", atiop, atiop->ccb_h.target_lun);
	atiop->ccb_h.ccb_mpt_ptr = mpt;
	atiop->ccb_h.status = CAM_CDB_RECVD;
	atiop->ccb_h.target_lun = lun;
	atiop->sense_len = 0;
	atiop->init_id = GET_INITIATOR_INDEX(reply_desc);
	atiop->cdb_len = mpt_cdblen(cdbp[0], 16);
	memcpy(atiop->cdb_io.cdb_bytes, cdbp, atiop->cdb_len);

	/*
	 * The tag we construct here allows us to find the
	 * original request that the command came in with.
	 *
	 * This way we don't have to depend on anything but the
	 * tag to find things when CCBs show back up from CAM.
	 */
	atiop->tag_id = MPT_MAKE_TAGID(mpt, req, ioindex);
	tgt->tag_id = atiop->tag_id;
	if (tag_action) {
		atiop->tag_action = tag_action;
		atiop->ccb_h.flags = CAM_TAG_ACTION_VALID;
	}
	if (mpt->verbose >= MPT_PRT_DEBUG) {
		int i;
		mpt_prt(mpt, "START_CCB %p for lun %u CDB=<", atiop,
		    atiop->ccb_h.target_lun);
		for (i = 0; i < atiop->cdb_len; i++) {
			mpt_prtc(mpt, "%02x%c", cdbp[i] & 0xff,
			    (i == (atiop->cdb_len - 1))? '>' : ' ');
		}
		mpt_prtc(mpt, " itag %x tag %x rdesc %x dl=%u\n",
	    	    itag, atiop->tag_id, tgt->reply_desc, tgt->resid);
	}
	
	MPTLOCK_2_CAMLOCK(mpt);
	xpt_done((union ccb *)atiop);
	CAMLOCK_2_MPTLOCK(mpt);
}

static void
mpt_tgt_dump_tgt_state(struct mpt_softc *mpt, request_t *req)
{
	mpt_tgt_state_t *tgt = MPT_TGT_STATE(mpt, req);

	mpt_prt(mpt, "req %p:%u tgt:rdesc 0x%x resid %u xfrd %u ccb %p treq %p "
	    "nx %d tag 0x%08x state=%d\n", req, req->serno, tgt->reply_desc,
	    tgt->resid, tgt->bytes_xfered, tgt->ccb, tgt->req, tgt->nxfers,
	    tgt->tag_id, tgt->state);
}

static void
mpt_tgt_dump_req_state(struct mpt_softc *mpt, request_t *req)
{
	mpt_prt(mpt, "req %p:%u index %u (%x) state %x\n", req, req->serno,
	    req->index, req->index, req->state);
	mpt_tgt_dump_tgt_state(mpt, req);
}

static int
mpt_scsi_tgt_reply_handler(struct mpt_softc *mpt, request_t *req,
    uint32_t reply_desc, MSG_DEFAULT_REPLY *reply_frame)
{
	int dbg;
	union ccb *ccb;
	U16 status;

	if (reply_frame == NULL) {
		/*
		 * Figure out what the state of the command is.
		 */
		mpt_tgt_state_t *tgt = MPT_TGT_STATE(mpt, req);

#ifdef	INVARIANTS
		mpt_req_spcl(mpt, req, "turbo scsi_tgt_reply", __LINE__);
		if (tgt->req) {
			mpt_req_not_spcl(mpt, tgt->req,
			    "turbo scsi_tgt_reply associated req", __LINE__);
		}
#endif
		switch(tgt->state) {
		case TGT_STATE_LOADED:
			/*
			 * This is a new command starting.
			 */
			mpt_scsi_tgt_atio(mpt, req, reply_desc);
			break;
		case TGT_STATE_MOVING_DATA:
		{
			uint8_t *sp = NULL, sense[MPT_SENSE_SIZE];

			ccb = tgt->ccb;
			if (tgt->req == NULL) {
				panic("mpt: turbo target reply with null "
				    "associated request moving data");
				/* NOTREACHED */
			}
			if (ccb == NULL) {
				if (tgt->is_local == 0) {
					panic("mpt: turbo target reply with "
					    "null associated ccb moving data");
					/* NOTREACHED */
				}
				mpt_lprt(mpt, MPT_PRT_DEBUG,
				    "TARGET_ASSIST local done\n");
				TAILQ_REMOVE(&mpt->request_pending_list,
				    tgt->req, links);
				mpt_free_request(mpt, tgt->req);
				tgt->req = NULL;
				mpt_scsi_tgt_status(mpt, NULL, req,
				    0, NULL);
				return (TRUE);
			}
			tgt->ccb = NULL;
			tgt->nxfers++;
			untimeout(mpt_timeout, ccb, ccb->ccb_h.timeout_ch);
			mpt_lprt(mpt, MPT_PRT_DEBUG,
			    "TARGET_ASSIST %p (req %p:%u) done tag 0x%x\n",
			    ccb, tgt->req, tgt->req->serno, ccb->csio.tag_id);
			/*
			 * Free the Target Assist Request
			 */
			KASSERT(tgt->req->ccb == ccb,
			    ("tgt->req %p:%u tgt->req->ccb %p", tgt->req,
			    tgt->req->serno, tgt->req->ccb));
			TAILQ_REMOVE(&mpt->request_pending_list,
			    tgt->req, links);
			mpt_free_request(mpt, tgt->req);
			tgt->req = NULL;

			/*
			 * Do we need to send status now? That is, are
			 * we done with all our data transfers?
			 */
			if ((ccb->ccb_h.flags & CAM_SEND_STATUS) == 0) {
				mpt_set_ccb_status(ccb, CAM_REQ_CMP);
				ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
				KASSERT(ccb->ccb_h.status,
				    ("zero ccb sts at %d\n", __LINE__));
				tgt->state = TGT_STATE_IN_CAM;
				if (mpt->outofbeer) {
					ccb->ccb_h.status |= CAM_RELEASE_SIMQ;
					mpt->outofbeer = 0;
					mpt_lprt(mpt, MPT_PRT_DEBUG, "THAWQ\n");
				}
				MPTLOCK_2_CAMLOCK(mpt);
				xpt_done(ccb);
				CAMLOCK_2_MPTLOCK(mpt);
				break;
			}
			/*
			 * Otherwise, send status (and sense)
			 */
			if (ccb->ccb_h.flags & CAM_SEND_SENSE) {
				sp = sense;
				memcpy(sp, &ccb->csio.sense_data,
				   min(ccb->csio.sense_len, MPT_SENSE_SIZE));
			}
			mpt_scsi_tgt_status(mpt, ccb, req,
			    ccb->csio.scsi_status, sp);
			break;
		}
		case TGT_STATE_SENDING_STATUS:
		case TGT_STATE_MOVING_DATA_AND_STATUS:
		{
			int ioindex;
			ccb = tgt->ccb;

			if (tgt->req == NULL) {
				panic("mpt: turbo target reply with null "
				    "associated request sending status");
				/* NOTREACHED */
			}

			if (ccb) {
				tgt->ccb = NULL;
				if (tgt->state ==
				    TGT_STATE_MOVING_DATA_AND_STATUS) {
					tgt->nxfers++;
				}
				untimeout(mpt_timeout, ccb,
				    ccb->ccb_h.timeout_ch);
				if (ccb->ccb_h.flags & CAM_SEND_SENSE) {
					ccb->ccb_h.status |= CAM_SENT_SENSE;
				}
				mpt_lprt(mpt, MPT_PRT_DEBUG,
				    "TARGET_STATUS tag %x sts %x flgs %x req "
				    "%p\n", ccb->csio.tag_id, ccb->ccb_h.status,
				    ccb->ccb_h.flags, tgt->req);
				/*
				 * Free the Target Send Status Request
				 */
				KASSERT(tgt->req->ccb == ccb,
				    ("tgt->req %p:%u tgt->req->ccb %p",
				    tgt->req, tgt->req->serno, tgt->req->ccb));
				/*
				 * Notify CAM that we're done
				 */
				mpt_set_ccb_status(ccb, CAM_REQ_CMP);
				ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
				KASSERT(ccb->ccb_h.status,
				    ("ZERO ccb sts at %d\n", __LINE__));
				tgt->ccb = NULL;
			} else {
				mpt_lprt(mpt, MPT_PRT_DEBUG,
				    "TARGET_STATUS non-CAM for  req %p:%u\n",
				    tgt->req, tgt->req->serno);
			}
			TAILQ_REMOVE(&mpt->request_pending_list,
			    tgt->req, links);
			mpt_free_request(mpt, tgt->req);
			tgt->req = NULL;

			/*
			 * And re-post the Command Buffer.
			 * This will reset the state.
			 */
			ioindex = GET_IO_INDEX(reply_desc);
			TAILQ_REMOVE(&mpt->request_pending_list, req, links);
			tgt->is_local = 0;
			mpt_post_target_command(mpt, req, ioindex);

			/*
			 * And post a done for anyone who cares
			 */
			if (ccb) {
				if (mpt->outofbeer) {
					ccb->ccb_h.status |= CAM_RELEASE_SIMQ;
					mpt->outofbeer = 0;
					mpt_lprt(mpt, MPT_PRT_DEBUG, "THAWQ\n");
				}
				MPTLOCK_2_CAMLOCK(mpt);
				xpt_done(ccb);
				CAMLOCK_2_MPTLOCK(mpt);
			}
			break;
		}
		case TGT_STATE_NIL:	/* XXX This Never Happens XXX */
			tgt->state = TGT_STATE_LOADED;
			break;
		default:
			mpt_prt(mpt, "Unknown Target State 0x%x in Context "
			    "Reply Function\n", tgt->state);
		}
		return (TRUE);
	}

	status = le16toh(reply_frame->IOCStatus);
	if (status != MPI_IOCSTATUS_SUCCESS) {
		dbg = MPT_PRT_ERROR;
	} else {
		dbg = MPT_PRT_DEBUG1;
	}

	mpt_lprt(mpt, dbg,
	    "SCSI_TGT REPLY: req=%p:%u reply=%p func=%x IOCstatus 0x%x\n",
	     req, req->serno, reply_frame, reply_frame->Function, status);

	switch (reply_frame->Function) {
	case MPI_FUNCTION_TARGET_CMD_BUFFER_POST:
	{
		mpt_tgt_state_t *tgt;
#ifdef	INVARIANTS
		mpt_req_spcl(mpt, req, "tgt reply BUFFER POST", __LINE__);
#endif
		if (status != MPI_IOCSTATUS_SUCCESS) {
			/*
			 * XXX What to do?
			 */
			break;
		}
		tgt = MPT_TGT_STATE(mpt, req);
		KASSERT(tgt->state == TGT_STATE_LOADING,
		    ("bad state 0x%x on reply to buffer post\n", tgt->state));
		mpt_assign_serno(mpt, req);
		tgt->state = TGT_STATE_LOADED;
		break;
	}
	case MPI_FUNCTION_TARGET_ASSIST:
#ifdef	INVARIANTS
		mpt_req_not_spcl(mpt, req, "tgt reply TARGET ASSIST", __LINE__);
#endif
		mpt_prt(mpt, "target assist completion\n");
		TAILQ_REMOVE(&mpt->request_pending_list, req, links);
		mpt_free_request(mpt, req);
		break;
	case MPI_FUNCTION_TARGET_STATUS_SEND:
#ifdef	INVARIANTS
		mpt_req_not_spcl(mpt, req, "tgt reply STATUS SEND", __LINE__);
#endif
		mpt_prt(mpt, "status send completion\n");
		TAILQ_REMOVE(&mpt->request_pending_list, req, links);
		mpt_free_request(mpt, req);
		break;
	case MPI_FUNCTION_TARGET_MODE_ABORT:
	{
		PTR_MSG_TARGET_MODE_ABORT_REPLY abtrp =
		    (PTR_MSG_TARGET_MODE_ABORT_REPLY) reply_frame;
		PTR_MSG_TARGET_MODE_ABORT abtp =
		    (PTR_MSG_TARGET_MODE_ABORT) req->req_vbuf;
		uint32_t cc = GET_IO_INDEX(le32toh(abtp->ReplyWord));
#ifdef	INVARIANTS
		mpt_req_not_spcl(mpt, req, "tgt reply TMODE ABORT", __LINE__);
#endif
		mpt_prt(mpt, "ABORT RX_ID 0x%x Complete; status 0x%x cnt %u\n",
		    cc, le16toh(abtrp->IOCStatus), le32toh(abtrp->AbortCount));
		TAILQ_REMOVE(&mpt->request_pending_list, req, links);
		mpt_free_request(mpt, req);
		break;
	}
	default:
		mpt_prt(mpt, "Unknown Target Address Reply Function code: "
		    "0x%x\n", reply_frame->Function);
		break;
	}
	return (TRUE);
}