/******************************************************************************
*
* Name: acmacros.h - C macros for the entire subsystem.
* $Revision: 100 $
*
*****************************************************************************/
/******************************************************************************
*
* 1. Copyright Notice
*
* Some or all of this work - Copyright (c) 1999, 2000, 2001, Intel Corp.
* All rights reserved.
*
* 2. License
*
* 2.1. This is your license from Intel Corp. under its intellectual property
* rights. You may have additional license terms from the party that provided
* you this software, covering your right to use that party's intellectual
* property rights.
*
* 2.2. Intel grants, free of charge, to any person ("Licensee") obtaining a
* copy of the source code appearing in this file ("Covered Code") an
* irrevocable, perpetual, worldwide license under Intel's copyrights in the
* base code distributed originally by Intel ("Original Intel Code") to copy,
* make derivatives, distribute, use and display any portion of the Covered
* Code in any form, with the right to sublicense such rights; and
*
* 2.3. Intel grants Licensee a non-exclusive and non-transferable patent
* license (with the right to sublicense), under only those claims of Intel
* patents that are infringed by the Original Intel Code, to make, use, sell,
* offer to sell, and import the Covered Code and derivative works thereof
* solely to the minimum extent necessary to exercise the above copyright
* license, and in no event shall the patent license extend to any additions
* to or modifications of the Original Intel Code. No other license or right
* is granted directly or by implication, estoppel or otherwise;
*
* The above copyright and patent license is granted only if the following
* conditions are met:
*
* 3. Conditions
*
* 3.1. Redistribution of Source with Rights to Further Distribute Source.
* Redistribution of source code of any substantial portion of the Covered
* Code or modification with rights to further distribute source must include
* the above Copyright Notice, the above License, this list of Conditions,
* and the following Disclaimer and Export Compliance provision. In addition,
* Licensee must cause all Covered Code to which Licensee contributes to
* contain a file documenting the changes Licensee made to create that Covered
* Code and the date of any change. Licensee must include in that file the
* documentation of any changes made by any predecessor Licensee. Licensee
* must include a prominent statement that the modification is derived,
* directly or indirectly, from Original Intel Code.
*
* 3.2. Redistribution of Source with no Rights to Further Distribute Source.
* Redistribution of source code of any substantial portion of the Covered
* Code or modification without rights to further distribute source must
* include the following Disclaimer and Export Compliance provision in the
* documentation and/or other materials provided with distribution. In
* addition, Licensee may not authorize further sublicense of source of any
* portion of the Covered Code, and must include terms to the effect that the
* license from Licensee to its licensee is limited to the intellectual
* property embodied in the software Licensee provides to its licensee, and
* not to intellectual property embodied in modifications its licensee may
* make.
*
* 3.3. Redistribution of Executable. Redistribution in executable form of any
* substantial portion of the Covered Code or modification must reproduce the
* above Copyright Notice, and the following Disclaimer and Export Compliance
* provision in the documentation and/or other materials provided with the
* distribution.
*
* 3.4. Intel retains all right, title, and interest in and to the Original
* Intel Code.
*
* 3.5. Neither the name Intel nor any other trademark owned or controlled by
* Intel shall be used in advertising or otherwise to promote the sale, use or
* other dealings in products derived from or relating to the Covered Code
* without prior written authorization from Intel.
*
* 4. Disclaimer and Export Compliance
*
* 4.1. INTEL MAKES NO WARRANTY OF ANY KIND REGARDING ANY SOFTWARE PROVIDED
* HERE. ANY SOFTWARE ORIGINATING FROM INTEL OR DERIVED FROM INTEL SOFTWARE
* IS PROVIDED "AS IS," AND INTEL WILL NOT PROVIDE ANY SUPPORT, ASSISTANCE,
* INSTALLATION, TRAINING OR OTHER SERVICES. INTEL WILL NOT PROVIDE ANY
* UPDATES, ENHANCEMENTS OR EXTENSIONS. INTEL SPECIFICALLY DISCLAIMS ANY
* IMPLIED WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT AND FITNESS FOR A
* PARTICULAR PURPOSE.
*
* 4.2. IN NO EVENT SHALL INTEL HAVE ANY LIABILITY TO LICENSEE, ITS LICENSEES
* OR ANY OTHER THIRD PARTY, FOR ANY LOST PROFITS, LOST DATA, LOSS OF USE OR
* COSTS OF PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, OR FOR ANY INDIRECT,
* SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THIS AGREEMENT, UNDER ANY
* CAUSE OF ACTION OR THEORY OF LIABILITY, AND IRRESPECTIVE OF WHETHER INTEL
* HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES. THESE LIMITATIONS
* SHALL APPLY NOTWITHSTANDING THE FAILURE OF THE ESSENTIAL PURPOSE OF ANY
* LIMITED REMEDY.
*
* 4.3. Licensee shall not export, either directly or indirectly, any of this
* software or system incorporating such software without first obtaining any
* required license or other approval from the U. S. Department of Commerce or
* any other agency or department of the United States Government. In the
* event Licensee exports any such software from the United States or
* re-exports any such software from a foreign destination, Licensee shall
* ensure that the distribution and export/re-export of the software is in
* compliance with all laws, regulations, orders, or other restrictions of the
* U.S. Export Administration Regulations. Licensee agrees that neither it nor
* any of its subsidiaries will export/re-export any technical data, process,
* software, or service, directly or indirectly, to any country for which the
* United States government or any agency thereof requires an export license,
* other governmental approval, or letter of assurance, without first obtaining
* such license, approval or letter.
*
*****************************************************************************/
#ifndef __ACMACROS_H__
#define __ACMACROS_H__
/*
* Data manipulation macros
*/
#ifndef LOWORD
#define LOWORD(l) ((UINT16)(NATIVE_UINT)(l))
#endif
#ifndef HIWORD
#define HIWORD(l) ((UINT16)((((NATIVE_UINT)(l)) >> 16) & 0xFFFF))
#endif
#ifndef LOBYTE
#define LOBYTE(l) ((UINT8)(UINT16)(l))
#endif
#ifndef HIBYTE
#define HIBYTE(l) ((UINT8)((((UINT16)(l)) >> 8) & 0xFF))
#endif
#define BIT0(x) ((((x) & 0x01) > 0) ? 1 : 0)
#define BIT1(x) ((((x) & 0x02) > 0) ? 1 : 0)
#define BIT2(x) ((((x) & 0x04) > 0) ? 1 : 0)
#define BIT3(x) ((((x) & 0x08) > 0) ? 1 : 0)
#define BIT4(x) ((((x) & 0x10) > 0) ? 1 : 0)
#define BIT5(x) ((((x) & 0x20) > 0) ? 1 : 0)
#define BIT6(x) ((((x) & 0x40) > 0) ? 1 : 0)
#define BIT7(x) ((((x) & 0x80) > 0) ? 1 : 0)
#define LOW_BASE(w) ((UINT16) ((w) & 0x0000FFFF))
#define MID_BASE(b) ((UINT8) (((b) & 0x00FF0000) >> 16))
#define HI_BASE(b) ((UINT8) (((b) & 0xFF000000) >> 24))
#define LOW_LIMIT(w) ((UINT16) ((w) & 0x0000FFFF))
#define HI_LIMIT(b) ((UINT8) (((b) & 0x00FF0000) >> 16))
#ifdef _IA16
/*
* For 16-bit addresses, we have to assume that the upper 32 bits
* are zero.
*/
#ifndef LODWORD
#define LODWORD(l) (l)
#endif
#ifndef HIDWORD
#define HIDWORD(l) (0)
#endif
#define ACPI_GET_ADDRESS(a) ((a).Lo)
#define ACPI_STORE_ADDRESS(a,b) {(a).Hi=0;(a).Lo=(b);}
#define ACPI_VALID_ADDRESS(a) ((a).Hi | (a).Lo)
#else
#ifdef ACPI_NO_INTEGER64_SUPPORT
/*
* ACPI_INTEGER is 32-bits, no 64-bit support on this platform
*/
#ifndef LODWORD
#define LODWORD(l) ((UINT32)(l))
#endif
#ifndef HIDWORD
#define HIDWORD(l) (0)
#endif
#define ACPI_GET_ADDRESS(a) (a)
#define ACPI_STORE_ADDRESS(a,b) ((a)=(b))
#define ACPI_VALID_ADDRESS(a) (a)
#else
/*
* Full 64-bit address/integer on both 32-bit and 64-bit platforms
*/
#ifndef LODWORD
#define LODWORD(l) ((UINT32)(UINT64)(l))
#endif
#ifndef HIDWORD
#define HIDWORD(l) ((UINT32)(((*(UINT64_STRUCT *)(&l))).Hi))
#endif
#define ACPI_GET_ADDRESS(a) (a)
#define ACPI_STORE_ADDRESS(a,b) ((a)=(b))
#define ACPI_VALID_ADDRESS(a) (a)
#endif
#endif
/*
* Extract a byte of data using a pointer. Any more than a byte and we
* get into potential aligment issues -- see the STORE macros below
*/
#define GET8(addr) (*(UINT8*)(addr))
/* Pointer arithmetic */
#define POINTER_ADD(t,a,b) (t *) ((NATIVE_UINT)(a) + (NATIVE_UINT)(b))
#define POINTER_DIFF(a,b) ((UINT32) ((NATIVE_UINT)(a) - (NATIVE_UINT)(b)))
/*
* Macros for moving data around to/from buffers that are possibly unaligned.
* If the hardware supports the transfer of unaligned data, just do the store.
* Otherwise, we have to move one byte at a time.
*/
#ifdef _HW_ALIGNMENT_SUPPORT
/* The hardware supports unaligned transfers, just do the move */
#define MOVE_UNALIGNED16_TO_16(d,s) *(UINT16*)(d) = *(UINT16*)(s)
#define MOVE_UNALIGNED32_TO_32(d,s) *(UINT32*)(d) = *(UINT32*)(s)
#define MOVE_UNALIGNED16_TO_32(d,s) *(UINT32*)(d) = *(UINT16*)(s)
#define MOVE_UNALIGNED64_TO_64(d,s) *(UINT64*)(d) = *(UINT64*)(s)
#else
/*
* The hardware does not support unaligned transfers. We must move the
* data one byte at a time. These macros work whether the source or
* the destination (or both) is/are unaligned.
*/
#define MOVE_UNALIGNED16_TO_16(d,s) {((UINT8 *)(d))[0] = ((UINT8 *)(s))[0];\
((UINT8 *)(d))[1] = ((UINT8 *)(s))[1];}
#define MOVE_UNALIGNED32_TO_32(d,s) {((UINT8 *)(d))[0] = ((UINT8 *)(s))[0];\
((UINT8 *)(d))[1] = ((UINT8 *)(s))[1];\
((UINT8 *)(d))[2] = ((UINT8 *)(s))[2];\
((UINT8 *)(d))[3] = ((UINT8 *)(s))[3];}
#define MOVE_UNALIGNED16_TO_32(d,s) {(*(UINT32*)(d)) = 0; MOVE_UNALIGNED16_TO_16(d,s);}
#define MOVE_UNALIGNED64_TO_64(d,s) {((UINT8 *)(d))[0] = ((UINT8 *)(s))[0];\
((UINT8 *)(d))[1] = ((UINT8 *)(s))[1];\
((UINT8 *)(d))[2] = ((UINT8 *)(s))[2];\
((UINT8 *)(d))[3] = ((UINT8 *)(s))[3];\
((UINT8 *)(d))[4] = ((UINT8 *)(s))[4];\
((UINT8 *)(d))[5] = ((UINT8 *)(s))[5];\
((UINT8 *)(d))[6] = ((UINT8 *)(s))[6];\
((UINT8 *)(d))[7] = ((UINT8 *)(s))[7];}
#endif
/*
* Fast power-of-two math macros for non-optimized compilers
*/
#define _DIV(value,PowerOf2) ((UINT32) ((value) >> (PowerOf2)))
#define _MUL(value,PowerOf2) ((UINT32) ((value) << (PowerOf2)))
#define _MOD(value,Divisor) ((UINT32) ((value) & ((Divisor) -1)))
#define DIV_2(a) _DIV(a,1)
#define MUL_2(a) _MUL(a,1)
#define MOD_2(a) _MOD(a,2)
#define DIV_4(a) _DIV(a,2)
#define MUL_4(a) _MUL(a,2)
#define MOD_4(a) _MOD(a,4)
#define DIV_8(a) _DIV(a,3)
#define MUL_8(a) _MUL(a,3)
#define MOD_8(a) _MOD(a,8)
#define DIV_16(a) _DIV(a,4)
#define MUL_16(a) _MUL(a,4)
#define MOD_16(a) _MOD(a,16)
/*
* Rounding macros (Power of two boundaries only)
*/
#define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1)))
#define ROUND_UP(value,boundary) (((value) + ((boundary)-1)) & (~((boundary)-1)))
#define ROUND_DOWN_TO_32_BITS(a) ROUND_DOWN(a,4)
#define ROUND_DOWN_TO_64_BITS(a) ROUND_DOWN(a,8)
#define ROUND_DOWN_TO_NATIVE_WORD(a) ROUND_DOWN(a,ALIGNED_ADDRESS_BOUNDARY)
#define ROUND_UP_TO_32BITS(a) ROUND_UP(a,4)
#define ROUND_UP_TO_64BITS(a) ROUND_UP(a,8)
#define ROUND_UP_TO_NATIVE_WORD(a) ROUND_UP(a,ALIGNED_ADDRESS_BOUNDARY)
#define ROUND_PTR_UP_TO_4(a,b) ((b *)(((NATIVE_UINT)(a) + 3) & ~3))
#define ROUND_PTR_UP_TO_8(a,b) ((b *)(((NATIVE_UINT)(a) + 7) & ~7))
#define ROUND_BITS_UP_TO_BYTES(a) DIV_8((a) + 7)
#define ROUND_BITS_DOWN_TO_BYTES(a) DIV_8((a))
#define ROUND_UP_TO_1K(a) (((a) + 1023) >> 10)
/* Generic (non-power-of-two) rounding */
#define ROUND_UP_TO(value,boundary) (((value) + ((boundary)-1)) / (boundary))
/*
* Bitmask creation
* Bit positions start at zero.
* MASK_BITS_ABOVE creates a mask starting AT the position and above
* MASK_BITS_BELOW creates a mask starting one bit BELOW the position
*/
#define MASK_BITS_ABOVE(position) (~(((ACPI_INTEGER)(-1)) << ((UINT32) (position))))
#define MASK_BITS_BELOW(position) (((ACPI_INTEGER)(-1)) << ((UINT32) (position)))
/* Macros for GAS addressing */
#ifndef _IA16
#define ACPI_PCI_DEVICE_MASK (UINT64) 0x0000FFFF00000000
#define ACPI_PCI_FUNCTION_MASK (UINT64) 0x00000000FFFF0000
#define ACPI_PCI_REGISTER_MASK (UINT64) 0x000000000000FFFF
#define ACPI_PCI_FUNCTION(a) (UINT16) ((((a) & ACPI_PCI_FUNCTION_MASK) >> 16))
#define ACPI_PCI_DEVICE(a) (UINT16) ((((a) & ACPI_PCI_DEVICE_MASK) >> 32))
#define ACPI_PCI_REGISTER(a) (UINT16) (((a) & ACPI_PCI_REGISTER_MASK))
#else
/* No support for GAS and PCI IDs in 16-bit mode */
#define ACPI_PCI_FUNCTION(a) (UINT16) ((a) & 0xFFFF0000)
#define ACPI_PCI_DEVICE(a) (UINT16) ((a) & 0x0000FFFF)
#define ACPI_PCI_REGISTER(a) (UINT16) ((a) & 0x0000FFFF)
#endif
/*
* An ACPI_NAMESPACE_NODE * can appear in some contexts,
* where a pointer to an ACPI_OPERAND_OBJECT can also
* appear. This macro is used to distinguish them.
*
* The DataType field is the first field in both structures.
*/
#define VALID_DESCRIPTOR_TYPE(d,t) (((ACPI_NAMESPACE_NODE *)d)->DataType == t)
/* Macro to test the object type */
#define IS_THIS_OBJECT_TYPE(d,t) (((ACPI_OPERAND_OBJECT *)d)->Common.Type == (UINT8)t)
/* Macro to check the table flags for SINGLE or MULTIPLE tables are allowed */
#define IS_SINGLE_TABLE(x) (((x) & 0x01) == ACPI_TABLE_SINGLE ? 1 : 0)
/*
* Macro to check if a pointer is within an ACPI table.
* Parameter (a) is the pointer to check. Parameter (b) must be defined
* as a pointer to an ACPI_TABLE_HEADER. (b+1) then points past the header,
* and ((UINT8 *)b+b->Length) points one byte past the end of the table.
*/
#ifndef _IA16
#define IS_IN_ACPI_TABLE(a,b) (((UINT8 *)(a) >= (UINT8 *)(b + 1)) &&\
((UINT8 *)(a) < ((UINT8 *)b + b->Length)))
#else
#define IS_IN_ACPI_TABLE(a,b) (_segment)(a) == (_segment)(b) &&\
(((UINT8 *)(a) >= (UINT8 *)(b + 1)) &&\
((UINT8 *)(a) < ((UINT8 *)b + b->Length)))
#endif
/*
* Macros for the master AML opcode table
*/
#ifdef ACPI_DEBUG
#define ACPI_OP(Name,PArgs,IArgs,ObjType,Class,Type,Flags) {Name,PArgs,IArgs,Flags,ObjType,Class,Type}
#else
#define ACPI_OP(Name,PArgs,IArgs,ObjType,Class,Type,Flags) {PArgs,IArgs,Flags,ObjType,Class,Type}
#endif
#define ARG_TYPE_WIDTH 5
#define ARG_1(x) ((UINT32)(x))
#define ARG_2(x) ((UINT32)(x) << (1 * ARG_TYPE_WIDTH))
#define ARG_3(x) ((UINT32)(x) << (2 * ARG_TYPE_WIDTH))
#define ARG_4(x) ((UINT32)(x) << (3 * ARG_TYPE_WIDTH))
#define ARG_5(x) ((UINT32)(x) << (4 * ARG_TYPE_WIDTH))
#define ARG_6(x) ((UINT32)(x) << (5 * ARG_TYPE_WIDTH))
#define ARGI_LIST1(a) (ARG_1(a))
#define ARGI_LIST2(a,b) (ARG_1(b)|ARG_2(a))
#define ARGI_LIST3(a,b,c) (ARG_1(c)|ARG_2(b)|ARG_3(a))
#define ARGI_LIST4(a,b,c,d) (ARG_1(d)|ARG_2(c)|ARG_3(b)|ARG_4(a))
#define ARGI_LIST5(a,b,c,d,e) (ARG_1(e)|ARG_2(d)|ARG_3(c)|ARG_4(b)|ARG_5(a))
#define ARGI_LIST6(a,b,c,d,e,f) (ARG_1(f)|ARG_2(e)|ARG_3(d)|ARG_4(c)|ARG_5(b)|ARG_6(a))
#define ARGP_LIST1(a) (ARG_1(a))
#define ARGP_LIST2(a,b) (ARG_1(a)|ARG_2(b))
#define ARGP_LIST3(a,b,c) (ARG_1(a)|ARG_2(b)|ARG_3(c))
#define ARGP_LIST4(a,b,c,d) (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d))
#define ARGP_LIST5(a,b,c,d,e) (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)|ARG_5(e))
#define ARGP_LIST6(a,b,c,d,e,f) (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)|ARG_5(e)|ARG_6(f))
#define GET_CURRENT_ARG_TYPE(List) (List & ((UINT32) 0x1F))
#define INCREMENT_ARG_LIST(List) (List >>= ((UINT32) ARG_TYPE_WIDTH))
/*
* Build a GAS structure from earlier ACPI table entries (V1.0 and 0.71 extensions)
*
* 1) Address space
* 2) Length in bytes -- convert to length in bits
* 3) Bit offset is zero
* 4) Reserved field is zero
* 5) Expand address to 64 bits
*/
#define ASL_BUILD_GAS_FROM_ENTRY(a,b,c,d) {a.AddressSpaceId = (UINT8) d;\
a.RegisterBitWidth = (UINT8) MUL_8 (b);\
a.RegisterBitOffset = 0;\
a.Reserved = 0;\
ACPI_STORE_ADDRESS (a.Address,c);}
/* ACPI V1.0 entries -- address space is always I/O */
#define ASL_BUILD_GAS_FROM_V1_ENTRY(a,b,c) ASL_BUILD_GAS_FROM_ENTRY(a,b,c,ACPI_ADR_SPACE_SYSTEM_IO)
/*
* Reporting macros that are never compiled out
*/
#define PARAM_LIST(pl) pl
/*
* Error reporting. These versions add callers module and line#. Since
* _THIS_MODULE gets compiled out when ACPI_DEBUG isn't defined, only
* use it in debug mode.
*/
#ifdef ACPI_DEBUG
#define REPORT_INFO(fp) {AcpiUtReportInfo(_THIS_MODULE,__LINE__,_COMPONENT); \
AcpiOsPrintf PARAM_LIST(fp);}
#define REPORT_ERROR(fp) {AcpiUtReportError(_THIS_MODULE,__LINE__,_COMPONENT); \
AcpiOsPrintf PARAM_LIST(fp);}
#define REPORT_WARNING(fp) {AcpiUtReportWarning(_THIS_MODULE,__LINE__,_COMPONENT); \
AcpiOsPrintf PARAM_LIST(fp);}
#else
#define REPORT_INFO(fp) {AcpiUtReportInfo("ACPI",__LINE__,_COMPONENT); \
AcpiOsPrintf PARAM_LIST(fp);}
#define REPORT_ERROR(fp) {AcpiUtReportError("ACPI",__LINE__,_COMPONENT); \
AcpiOsPrintf PARAM_LIST(fp);}
#define REPORT_WARNING(fp) {AcpiUtReportWarning("ACPI",__LINE__,_COMPONENT); \
AcpiOsPrintf PARAM_LIST(fp);}
#endif
/* Error reporting. These versions pass thru the module and line# */
#define _REPORT_INFO(a,b,c,fp) {AcpiUtReportInfo(a,b,c); \
AcpiOsPrintf PARAM_LIST(fp);}
#define _REPORT_ERROR(a,b,c,fp) {AcpiUtReportError(a,b,c); \
AcpiOsPrintf PARAM_LIST(fp);}
#define _REPORT_WARNING(a,b,c,fp) {AcpiUtReportWarning(a,b,c); \
AcpiOsPrintf PARAM_LIST(fp);}
/*
* Debug macros that are conditionally compiled
*/
#ifdef ACPI_DEBUG
#define MODULE_NAME(name) static char *_THIS_MODULE = name;
/*
* Function entry tracing.
* The first parameter should be the procedure name as a quoted string. This is declared
* as a local string ("_ProcName) so that it can be also used by the function exit macros below.
*/
#define PROC_NAME(a) ACPI_DEBUG_PRINT_INFO _Dbg; \
_Dbg.ComponentId = _COMPONENT; \
_Dbg.ProcName = a; \
_Dbg.ModuleName = _THIS_MODULE;
#define FUNCTION_TRACE(a) PROC_NAME(a)\
AcpiUtTrace(__LINE__,&_Dbg)
#define FUNCTION_TRACE_PTR(a,b) PROC_NAME(a)\
AcpiUtTracePtr(__LINE__,&_Dbg,(void *)b)
#define FUNCTION_TRACE_U32(a,b) PROC_NAME(a)\
AcpiUtTraceU32(__LINE__,&_Dbg,(UINT32)b)
#define FUNCTION_TRACE_STR(a,b) PROC_NAME(a)\
AcpiUtTraceStr(__LINE__,&_Dbg,(NATIVE_CHAR *)b)
#define FUNCTION_ENTRY() AcpiUtTrackStackPtr()
/*
* Function exit tracing.
* WARNING: These macros include a return statement. This is usually considered
* bad form, but having a separate exit macro is very ugly and difficult to maintain.
* One of the FUNCTION_TRACE macros above must be used in conjunction with these macros
* so that "_ProcName" is defined.
*/
#define return_VOID {AcpiUtExit(__LINE__,&_Dbg);return;}
#define return_ACPI_STATUS(s) {AcpiUtStatusExit(__LINE__,&_Dbg,s);return(s);}
#define return_VALUE(s) {AcpiUtValueExit(__LINE__,&_Dbg,s);return(s);}
#define return_PTR(s) {AcpiUtPtrExit(__LINE__,&_Dbg,(UINT8 *)s);return(s);}
/* Conditional execution */
#define DEBUG_EXEC(a) a
#define NORMAL_EXEC(a)
#define DEBUG_DEFINE(a) a;
#define DEBUG_ONLY_MEMBERS(a) a;
#define _OPCODE_NAMES
#define _VERBOSE_STRUCTURES
/* Stack and buffer dumping */
#define DUMP_STACK_ENTRY(a) AcpiExDumpOperand(a)
#define DUMP_OPERANDS(a,b,c,d,e) AcpiExDumpOperands(a,b,c,d,e,_THIS_MODULE,__LINE__)
#define DUMP_ENTRY(a,b) AcpiNsDumpEntry (a,b)
#define DUMP_TABLES(a,b) AcpiNsDumpTables(a,b)
#define DUMP_PATHNAME(a,b,c,d) AcpiNsDumpPathname(a,b,c,d)
#define DUMP_RESOURCE_LIST(a) AcpiRsDumpResourceList(a)
#define DUMP_BUFFER(a,b) AcpiUtDumpBuffer((UINT8 *)a,b,DB_BYTE_DISPLAY,_COMPONENT)
#define BREAK_MSG(a) AcpiOsSignal (ACPI_SIGNAL_BREAKPOINT,(a))
/*
* Generate INT3 on ACPI_ERROR (Debug only!)
*/
#define ERROR_BREAK
#ifdef ERROR_BREAK
#define BREAK_ON_ERROR(lvl) if ((lvl)&ACPI_ERROR) AcpiOsSignal(ACPI_SIGNAL_BREAKPOINT,"Fatal error encountered\n")
#else
#define BREAK_ON_ERROR(lvl)
#endif
/*
* Master debug print macros
* Print iff:
* 1) Debug print for the current component is enabled
* 2) Debug error level or trace level for the print statement is enabled
*/
#define ACPI_DEBUG_PRINT(pl) AcpiUtDebugPrint PARAM_LIST(pl)
#define ACPI_DEBUG_PRINT_RAW(pl) AcpiUtDebugPrintRaw PARAM_LIST(pl)
#else
/*
* This is the non-debug case -- make everything go away,
* leaving no executable debug code!
*/
#define MODULE_NAME(name)
#define _THIS_MODULE ""
#define DEBUG_EXEC(a)
#define NORMAL_EXEC(a) a;
#define DEBUG_DEFINE(a)
#define DEBUG_ONLY_MEMBERS(a)
#define PROC_NAME(a)
#define FUNCTION_TRACE(a)
#define FUNCTION_TRACE_PTR(a,b)
#define FUNCTION_TRACE_U32(a,b)
#define FUNCTION_TRACE_STR(a,b)
#define FUNCTION_EXIT
#define FUNCTION_STATUS_EXIT(s)
#define FUNCTION_VALUE_EXIT(s)
#define FUNCTION_ENTRY()
#define DUMP_STACK_ENTRY(a)
#define DUMP_OPERANDS(a,b,c,d,e)
#define DUMP_ENTRY(a,b)
#define DUMP_TABLES(a,b)
#define DUMP_PATHNAME(a,b,c,d)
#define DUMP_RESOURCE_LIST(a)
#define DUMP_BUFFER(a,b)
#define ACPI_DEBUG_PRINT(pl)
#define ACPI_DEBUG_PRINT_RAW(pl)
#define BREAK_MSG(a)
#define return_VOID return
#define return_ACPI_STATUS(s) return(s)
#define return_VALUE(s) return(s)
#define return_PTR(s) return(s)
#endif
/*
* Some code only gets executed when the debugger is built in.
* Note that this is entirely independent of whether the
* DEBUG_PRINT stuff (set by ACPI_DEBUG) is on, or not.
*/
#ifdef ENABLE_DEBUGGER
#define DEBUGGER_EXEC(a) a
#else
#define DEBUGGER_EXEC(a)
#endif
/*
* For 16-bit code, we want to shrink some things even though
* we are using ACPI_DEBUG to get the debug output
*/
#ifdef _IA16
#undef DEBUG_ONLY_MEMBERS
#undef _VERBOSE_STRUCTURES
#define DEBUG_ONLY_MEMBERS(a)
#endif
#ifdef ACPI_DEBUG
/*
* 1) Set name to blanks
* 2) Copy the object name
*/
#define ADD_OBJECT_NAME(a,b) MEMSET (a->Common.Name, ' ', sizeof (a->Common.Name));\
STRNCPY (a->Common.Name, AcpiGbl_NsTypeNames[b], sizeof (a->Common.Name))
#else
#define ADD_OBJECT_NAME(a,b)
#endif
/*
* Memory allocation tracking (DEBUG ONLY)
*/
#ifndef ACPI_DBG_TRACK_ALLOCATIONS
/* Memory allocation */
#define ACPI_MEM_ALLOCATE(a) AcpiOsAllocate(a)
#define ACPI_MEM_CALLOCATE(a) AcpiOsCallocate(a)
#define ACPI_MEM_FREE(a) AcpiOsFree(a)
#define ACPI_MEM_TRACKING(a)
#else
/* Memory allocation */
#define ACPI_MEM_ALLOCATE(a) AcpiUtAllocate(a,_COMPONENT,_THIS_MODULE,__LINE__)
#define ACPI_MEM_CALLOCATE(a) AcpiUtCallocate(a, _COMPONENT,_THIS_MODULE,__LINE__)
#define ACPI_MEM_FREE(a) AcpiUtFree(a,_COMPONENT,_THIS_MODULE,__LINE__)
#define ACPI_MEM_TRACKING(a) a
#endif /* ACPI_DBG_TRACK_ALLOCATIONS */
#define ACPI_GET_STACK_POINTER _asm {mov eax, ebx}
#endif /* ACMACROS_H */
