# Makefile.in generated by automake 1.6.1 from Makefile.am. # @configure_input@ # Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 # Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # $Id: Makefile.am,v 1.33 2002/09/10 19:59:25 joda Exp $ # $Id: Makefile.am.common,v 1.5 2002/05/19 18:35:37 joda Exp $ # $Id: Makefile.am.common,v 1.37.2.1 2003/05/08 17:08:09 joda Exp $ SHELL = @SHELL@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ bindir = @bindir@ sbindir = @sbindir@ libexecdir = @libexecdir@ datadir = @datadir@ sysconfdir = @sysconfdir@ sharedstatedir = @sharedstatedir@ localstatedir = @localstatedir@ libdir = @libdir@ infodir = @infodir@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = .. ACLOCAL = @ACLOCAL@ AUTOCONF = @AUTOCONF@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_DATA = @INSTALL_DATA@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ EXEEXT = @EXEEXT@ OBJEXT = @OBJEXT@ PATH_SEPARATOR = @PATH_SEPARATOR@ AIX_EXTRA_KAFS = @AIX_EXTRA_KAFS@ AMTAR = @AMTAR@ AS = @AS@ AWK = @AWK@ CANONICAL_HOST = @CANONICAL_HOST@ CATMAN = @CATMAN@ CATMANEXT = @CATMANEXT@ CC = @CC@ COMPILE_ET = @COMPILE_ET@ CPP = @CPP@ DBLIB = @DBLIB@ DEPDIR = @DEPDIR@ DIR_com_err = @DIR_com_err@ DIR_des = @DIR_des@ DIR_roken = @DIR_roken@ DLLTOOL = @DLLTOOL@ ECHO = @ECHO@ EXTRA_LIB45 = @EXTRA_LIB45@ GROFF = @GROFF@ INCLUDES_roken = @INCLUDES_roken@ INCLUDE_ = @INCLUDE_@ INCLUDE_des = @INCLUDE_des@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LEX = @LEX@ LEXLIB = @LEXLIB@ LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ LIBTOOL = @LIBTOOL@ LIB_ = @LIB_@ LIB_AUTH_SUBDIRS = @LIB_AUTH_SUBDIRS@ LIB_NDBM = @LIB_NDBM@ LIB_com_err = @LIB_com_err@ LIB_com_err_a = @LIB_com_err_a@ LIB_com_err_so = @LIB_com_err_so@ LIB_des = @LIB_des@ LIB_des_a = @LIB_des_a@ LIB_des_appl = @LIB_des_appl@ LIB_des_so = @LIB_des_so@ LIB_kdb = @LIB_kdb@ LIB_otp = @LIB_otp@ LIB_roken = @LIB_roken@ LIB_security = @LIB_security@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ NEED_WRITEAUTH_FALSE = @NEED_WRITEAUTH_FALSE@ NEED_WRITEAUTH_TRUE = @NEED_WRITEAUTH_TRUE@ NROFF = @NROFF@ OBJDUMP = @OBJDUMP@ PACKAGE = @PACKAGE@ RANLIB = @RANLIB@ STRIP = @STRIP@ VERSION = @VERSION@ VOID_RETSIGTYPE = @VOID_RETSIGTYPE@ WFLAGS = @WFLAGS@ WFLAGS_NOIMPLICITINT = @WFLAGS_NOIMPLICITINT@ WFLAGS_NOUNUSED = @WFLAGS_NOUNUSED@ X_CFLAGS = @X_CFLAGS@ X_EXTRA_LIBS = @X_EXTRA_LIBS@ X_LIBS = @X_LIBS@ X_PRE_LIBS = @X_PRE_LIBS@ YACC = @YACC@ am__include = @am__include@ am__quote = @am__quote@ dpagaix_cflags = @dpagaix_cflags@ dpagaix_ldadd = @dpagaix_ldadd@ dpagaix_ldflags = @dpagaix_ldflags@ install_sh = @install_sh@ AUTOMAKE_OPTIONS = foreign no-dependencies 1.6 SUFFIXES = .et .h .x .1 .3 .5 .8 .cat1 .cat3 .cat5 .cat8 INCLUDES = -I$(top_builddir)/include $(INCLUDES_roken) -DHOST=\"$(CANONICAL_HOST)\" @do_roken_rename_TRUE@ROKEN_RENAME = -DROKEN_RENAME AM_CFLAGS = $(WFLAGS) CP = cp buildinclude = $(top_builddir)/include LIB_XauReadAuth = @LIB_XauReadAuth@ LIB_crypt = @LIB_crypt@ LIB_dbm_firstkey = @LIB_dbm_firstkey@ LIB_dbopen = @LIB_dbopen@ LIB_dlopen = @LIB_dlopen@ LIB_dn_expand = @LIB_dn_expand@ LIB_el_init = @LIB_el_init@ LIB_getattr = @LIB_getattr@ LIB_gethostbyname = @LIB_gethostbyname@ LIB_getpwent_r = @LIB_getpwent_r@ LIB_getpwnam_r = @LIB_getpwnam_r@ LIB_getsockopt = @LIB_getsockopt@ LIB_logout = @LIB_logout@ LIB_logwtmp = @LIB_logwtmp@ LIB_odm_initialize = @LIB_odm_initialize@ LIB_openpty = @LIB_openpty@ LIB_pidfile = @LIB_pidfile@ LIB_res_search = @LIB_res_search@ LIB_setpcred = @LIB_setpcred@ LIB_setsockopt = @LIB_setsockopt@ LIB_socket = @LIB_socket@ LIB_syslog = @LIB_syslog@ LIB_tgetent = @LIB_tgetent@ HESIODLIB = @HESIODLIB@ HESIODINCLUDE = @HESIODINCLUDE@ INCLUDE_hesiod = @INCLUDE_hesiod@ LIB_hesiod = @LIB_hesiod@ INCLUDE_krb4 = @INCLUDE_krb4@ LIB_krb4 = @LIB_krb4@ INCLUDE_openldap = @INCLUDE_openldap@ LIB_openldap = @LIB_openldap@ INCLUDE_readline = @INCLUDE_readline@ LIB_readline = @LIB_readline@ NROFF_MAN = groff -mandoc -Tascii LIB_kafs = $(top_builddir)/lib/kafs/libkafs.la $(AIX_EXTRA_KAFS) @KRB5_TRUE@LIB_krb5 = $(top_builddir)/lib/krb5/libkrb5.la \ @KRB5_TRUE@ $(top_builddir)/lib/asn1/libasn1.la @KRB5_TRUE@LIB_gssapi = $(top_builddir)/lib/gssapi/libgssapi.la @DCE_TRUE@LIB_kdfs = $(top_builddir)/lib/kdfs/libkdfs.la SUBDIRS = kadm5 noinst_PROGRAMS = bits make_crypto CHECK_LOCAL = include_HEADERS = krb5-types.h noinst_HEADERS = crypto-headers.h CLEANFILES = \ asn1.h \ asn1_err.h \ base64.h \ com_err.h \ com_right.h \ crypto-headers.h\ der.h \ des.h \ editline.h \ err.h \ getarg.h \ glob.h \ gssapi.h \ hdb.h \ hdb_asn1.h \ hdb_err.h \ heim_err.h \ kafs.h \ krb5-protos.h \ krb5-private.h \ krb5-types.h \ krb5.h \ krb5_err.h \ md4.h \ md5.h \ rc4.h \ otp.h \ parse_time.h \ parse_units.h \ resolve.h \ roken-common.h \ roken.h \ sha.h \ sl.h \ xdbm.h subdir = include mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = noinst_PROGRAMS = bits$(EXEEXT) make_crypto$(EXEEXT) PROGRAMS = $(noinst_PROGRAMS) bits_SOURCES = bits.c bits_OBJECTS = bits.$(OBJEXT) bits_LDADD = $(LDADD) bits_DEPENDENCIES = bits_LDFLAGS = make_crypto_SOURCES = make_crypto.c make_crypto_OBJECTS = make_crypto.$(OBJEXT) make_crypto_LDADD = $(LDADD) make_crypto_DEPENDENCIES = make_crypto_LDFLAGS = DEFS = @DEFS@ DEFAULT_INCLUDES = -I. -I$(srcdir) -I. CPPFLAGS = @CPPFLAGS@ LDFLAGS = @LDFLAGS@ LIBS = @LIBS@ depcomp = am__depfiles_maybe = COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \ $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ CFLAGS = @CFLAGS@ DIST_SOURCES = bits.c make_crypto.c HEADERS = $(include_HEADERS) $(noinst_HEADERS) RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \ uninstall-info-recursive all-recursive install-data-recursive \ install-exec-recursive installdirs-recursive install-recursive \ uninstall-recursive check-recursive installcheck-recursive DIST_COMMON = $(include_HEADERS) $(noinst_HEADERS) Makefile.am \ Makefile.in DIST_SUBDIRS = $(SUBDIRS) SOURCES = bits.c make_crypto.c all: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: .SUFFIXES: .et .h .x .1 .3 .5 .8 .cat1 .cat3 .cat5 .cat8 .c .lo .o .obj $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/Makefile.am.common $(top_srcdir)/cf/Makefile.am.common $(top_srcdir)/configure.in $(ACLOCAL_M4) cd $(top_srcdir) && \ $(AUTOMAKE) --foreign include/Makefile Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) config.h: stamp-h1 @if test ! -f $@; then \ rm -f stamp-h1; \ $(MAKE) stamp-h1; \ else :; fi stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status include/config.h $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(top_srcdir)/configure.in $(ACLOCAL_M4) cd $(top_srcdir) && $(AUTOHEADER) touch $(srcdir)/config.h.in distclean-hdr: -rm -f config.h clean-noinstPROGRAMS: -test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS) bits$(EXEEXT): $(bits_OBJECTS) $(bits_DEPENDENCIES) @rm -f bits$(EXEEXT) $(LINK) $(bits_LDFLAGS) $(bits_OBJECTS) $(bits_LDADD) $(LIBS) make_crypto$(EXEEXT): $(make_crypto_OBJECTS) $(make_crypto_DEPENDENCIES) @rm -f make_crypto$(EXEEXT) $(LINK) $(make_crypto_LDFLAGS) $(make_crypto_OBJECTS) $(make_crypto_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) core *.core distclean-compile: -rm -f *.tab.c .c.o: $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< .c.obj: $(COMPILE) -c `cygpath -w $<` .c.lo: $(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: includeHEADERS_INSTALL = $(INSTALL_HEADER) install-includeHEADERS: $(include_HEADERS) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(includedir) @list='$(include_HEADERS)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f="`echo $$p | sed -e 's|^.*/||'`"; \ echo " $(includeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(includedir)/$$f"; \ $(includeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(includedir)/$$f; \ done uninstall-includeHEADERS: @$(NORMAL_UNINSTALL) @list='$(include_HEADERS)'; for p in $$list; do \ f="`echo $$p | sed -e 's|^.*/||'`"; \ echo " rm -f $(DESTDIR)$(includedir)/$$f"; \ rm -f $(DESTDIR)$(includedir)/$$f; \ done # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @set fnord $$MAKEFLAGS; amf=$$2; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @set fnord $$MAKEFLAGS; amf=$$2; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ETAGS = etags ETAGSFLAGS = tags: TAGS ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(ETAGS_ARGS)$$tags$$unique" \ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) top_distdir = .. distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) distdir: $(DISTFILES) @for file in $(DISTFILES); do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkinstalldirs) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d $(distdir)/$$subdir \ || mkdir $(distdir)/$$subdir \ || exit 1; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" \ distdir=../$(distdir)/$$subdir \ distdir) \ || exit 1; \ fi; \ done $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="${top_distdir}" distdir="$(distdir)" \ dist-hook check-am: all-am $(MAKE) $(AM_MAKEFLAGS) check-local check: check-recursive all-am: Makefile $(PROGRAMS) $(HEADERS) config.h all-local installdirs: installdirs-recursive installdirs-am: $(mkinstalldirs) $(DESTDIR)$(includedir) install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]* maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool clean-noinstPROGRAMS \ mostlyclean-am distclean: distclean-recursive distclean-am: clean-am distclean-compile distclean-generic distclean-hdr \ distclean-libtool distclean-tags dvi: dvi-recursive dvi-am: info: info-recursive info-am: install-data-am: install-includeHEADERS @$(NORMAL_INSTALL) $(MAKE) $(AM_MAKEFLAGS) install-data-hook install-exec-am: @$(NORMAL_INSTALL) $(MAKE) $(AM_MAKEFLAGS) install-exec-hook install-info: install-info-recursive install-man: installcheck-am: maintainer-clean: maintainer-clean-recursive maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool uninstall-am: uninstall-includeHEADERS uninstall-info-am uninstall-info: uninstall-info-recursive .PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am all-local check check-am \ check-local clean clean-generic clean-libtool \ clean-noinstPROGRAMS clean-recursive distclean \ distclean-compile distclean-generic distclean-hdr \ distclean-libtool distclean-recursive distclean-tags distdir \ dvi dvi-am dvi-recursive info info-am info-recursive install \ install-am install-data install-data-am install-data-recursive \ install-exec install-exec-am install-exec-recursive \ install-includeHEADERS install-info install-info-am \ install-info-recursive install-man install-recursive \ install-strip installcheck installcheck-am installdirs \ installdirs-am installdirs-recursive maintainer-clean \ maintainer-clean-generic maintainer-clean-recursive mostlyclean \ mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ mostlyclean-recursive tags tags-recursive uninstall \ uninstall-am uninstall-includeHEADERS uninstall-info-am \ uninstall-info-recursive uninstall-recursive install-suid-programs: @foo='$(bin_SUIDS)'; \ for file in $$foo; do \ x=$(DESTDIR)$(bindir)/$$file; \ if chown 0:0 $$x && chmod u+s $$x; then :; else \ echo "*"; \ echo "* Failed to install $$x setuid root"; \ echo "*"; \ fi; done install-exec-hook: install-suid-programs install-build-headers:: $(include_HEADERS) $(build_HEADERZ) @foo='$(include_HEADERS) $(nodist_include_HEADERS) $(build_HEADERZ)'; \ for f in $$foo; do \ f=`basename $$f`; \ if test -f "$(srcdir)/$$f"; then file="$(srcdir)/$$f"; \ else file="$$f"; fi; \ if cmp -s $$file $(buildinclude)/$$f 2> /dev/null ; then \ : ; else \ echo " $(CP) $$file $(buildinclude)/$$f"; \ $(CP) $$file $(buildinclude)/$$f; \ fi ; \ done all-local: install-build-headers check-local:: @if test '$(CHECK_LOCAL)'; then \ foo='$(CHECK_LOCAL)'; else \ foo='$(PROGRAMS)'; fi; \ if test "$$foo"; then \ failed=0; all=0; \ for i in $$foo; do \ all=`expr $$all + 1`; \ if ./$$i --version > /dev/null 2>&1; then \ echo "PASS: $$i"; \ else \ echo "FAIL: $$i"; \ failed=`expr $$failed + 1`; \ fi; \ done; \ if test "$$failed" -eq 0; then \ banner="All $$all tests passed"; \ else \ banner="$$failed of $$all tests failed"; \ fi; \ dashes=`echo "$$banner" | sed s/./=/g`; \ echo "$$dashes"; \ echo "$$banner"; \ echo "$$dashes"; \ test "$$failed" -eq 0; \ fi .x.c: @cmp -s $< $@ 2> /dev/null || cp $< $@ #NROFF_MAN = nroff -man .1.cat1: $(NROFF_MAN) $< > $@ .3.cat3: $(NROFF_MAN) $< > $@ .5.cat5: $(NROFF_MAN) $< > $@ .8.cat8: $(NROFF_MAN) $< > $@ dist-cat1-mans: @foo='$(man1_MANS)'; \ bar='$(man_MANS)'; \ for i in $$bar; do \ case $$i in \ *.1) foo="$$foo $$i";; \ esac; done ;\ for i in $$foo; do \ x=`echo $$i | sed 's/\.[^.]*$$/.cat1/'`; \ echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ done dist-cat3-mans: @foo='$(man3_MANS)'; \ bar='$(man_MANS)'; \ for i in $$bar; do \ case $$i in \ *.3) foo="$$foo $$i";; \ esac; done ;\ for i in $$foo; do \ x=`echo $$i | sed 's/\.[^.]*$$/.cat3/'`; \ echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ done dist-cat5-mans: @foo='$(man5_MANS)'; \ bar='$(man_MANS)'; \ for i in $$bar; do \ case $$i in \ *.5) foo="$$foo $$i";; \ esac; done ;\ for i in $$foo; do \ x=`echo $$i | sed 's/\.[^.]*$$/.cat5/'`; \ echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ done dist-cat8-mans: @foo='$(man8_MANS)'; \ bar='$(man_MANS)'; \ for i in $$bar; do \ case $$i in \ *.8) foo="$$foo $$i";; \ esac; done ;\ for i in $$foo; do \ x=`echo $$i | sed 's/\.[^.]*$$/.cat8/'`; \ echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ done dist-hook: dist-cat1-mans dist-cat3-mans dist-cat5-mans dist-cat8-mans install-cat-mans: $(SHELL) $(top_srcdir)/cf/install-catman.sh "$(INSTALL_DATA)" "$(mkinstalldirs)" "$(srcdir)" "$(DESTDIR)$(mandir)" '$(CATMANEXT)' $(man_MANS) $(man1_MANS) $(man3_MANS) $(man5_MANS) $(man8_MANS) install-data-hook: install-cat-mans .et.h: $(COMPILE_ET) $< .et.c: $(COMPILE_ET) $< krb5-types.h: bits$(EXEEXT) ./bits$(EXEEXT) krb5-types.h crypto-headers.h: make_crypto$(EXEEXT) ./make_crypto$(EXEEXT) crypto-headers.h # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: