From 89f1cf1c518a2e680365997040382df1c68906fe Mon Sep 17 00:00:00 2001
From: Andrzej Bialecki <abial@FreeBSD.org>
Date: Sun, 20 Sep 1998 00:52:34 +0000
Subject: Use system-wide MAKEDEV, instead of our own copy.

Suggested by:	Ockham's razor
---
 release/picobsd/net/mfs.tree/MAKEDEV | 1167 ----------------------------------
 1 file changed, 1167 deletions(-)
 delete mode 100755 release/picobsd/net/mfs.tree/MAKEDEV

(limited to 'release/picobsd/net')

diff --git a/release/picobsd/net/mfs.tree/MAKEDEV b/release/picobsd/net/mfs.tree/MAKEDEV
deleted file mode 100755
index 6e8560f29d2d..000000000000
--- a/release/picobsd/net/mfs.tree/MAKEDEV
+++ /dev/null
@@ -1,1167 +0,0 @@
-#!/bin/sh -
-#
-# Copyright (c) 1990 The Regents of the University of California.
-# All rights reserved.
-#
-# Written and contributed by W. Jolitz 12/90
-#
-# Redistribution and use in source and binary forms are permitted provided
-# that: (1) source distributions retain this entire copyright notice and
-# comment, and (2) distributions including binaries display the following
-# acknowledgement:  ``This product includes software developed by the
-# University of California, Berkeley and its contributors'' in the
-# documentation or other materials provided with the distribution and in
-# all advertising materials mentioning features or use of this software.
-# Neither the name of the University nor the names of its contributors may
-# be used to endorse or promote products derived from this software without
-# specific prior written permission.
-# THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-#
-#	@(#)MAKEDEV	5.2 (Berkeley) 6/22/90
-#
-# Device "make" file.  Valid arguments:
-#	all	makes all known devices, standard number of units (or close)
-#	std	standard devices
-#	local	configuration specific devices
-#	mach-4	mach4&lites+devices for Mach's XFree86 distribution
-#	(see http://www.cs.hut.fi/lites.html for more info on LITES)
-#
-# Tapes:
-#	wt*	QIC-interfaced (e.g. not SCSI) 3M cartridge tape
-#	st*	"NEW type scsi tapes" (old driver uses the
-#		block devices of the disks to get access)
-#	ft*	QIC-40/QIC-80 3M cartridge tape (interfaced
-#		via the floppy disk controller)
-#
-# Disks:
-#	wd*	"Winchester" disk drives (ST506,IDE,ESDI,RLL,...)
-#	wfd*	"IDE floppy" disk drives (LS-120)
-#	fd*	"floppy" disk drives (3 1/2", 5 1/4")
-#	sd*	"SCSI disks"
-#	cd*	"SCSI CD-ROM disks"
-#	mcd*	"Mitsumi CD-ROM disks"
-#	scd*	"Sony CD-ROM disks"
-#	matcd*	"Matsushita (Panasonic) CD-ROM disks"
-#	wcd*	"IDE CD-ROM disks"
-#	vn*	"vnode disks"
-#	od*	"optical disks"
-#
-# Console ports:
-#	vty*	virtual console devices for syscons/pcvt/codrv
-#
-# Pointing devices:
-#	mse*	Logitech and ATI Inport bus mouse
-#	psm*	PS/2 mouse
-#	sysmouse Mousesystems mouse emulator for syscons
-#
-# Time devices:
-#	refclock-*  serial ports used by xntpd parse refclocks
-#
-# Terminal ports:
-#	tty*	general purpose serial ports
-#	cua*	dialout serial ports
-#	ttyA*	Specialix SI/XIO dialin ports ('*' = number of devices)
-#	cuaA*	Specialix SI/XIO dialout ports
-#	ttyD*	Digiboard - 16 dialin ports
-#	cuaD*	Digiboard - 16 dialout ports
-#	ttyR*	Rocketport dialin ports
-#	cuaR*	Rocketport dialout ports
-#
-# Pseudo terminals:
-#	pty*	set of 32 master and slave pseudo terminals
-#	vty*	virtual terminals using syscons/pcvt/codrv console
-#
-# Printers:
-#	lpt*	stock lp
-#
-# SCSI devices (other than CD-ROM, tape and disk):
-#	ssc	The ``super scsi'' device
-#	uk*	"unknown" device (supports ioctl calls only)
-#	worm*	WORM driver
-#	pt*	Processor Type (HP scanner, as one example)
-#
-# PC-CARD (previously called PCMCIA) support
-#	card*	PC-CARD slots
-#
-# Special purpose devices:
-#	apm	Advanced Power Management BIOS
-#	bpf*	packet filter
-#	speaker	pc speaker
-#	tw*	xten power controller
-#	snd*	various sound cards
-#	pcaudio PCM audio driver
-#	socksys iBCS2 socket system driver
-#	vat	VAT compatibility audio driver (requires snd*)
-#	gsc	Genius GS-4500 hand scanner
-#	joy	pc joystick
-#	tun*	Tunneling IP device
-#	snp*	tty snoop devices
-#	spigot	Video Spigot video acquisition card
-#	ctx*    Cortex-I video acquisition card
-#	meteor*	Matrox Meteor video acquisition card (pci)
-#	bktr*	Bt848 based video acquisition card (pci)
-#	labpc*	National Instrument's Lab-PC and LAB-PC+
-#	perfmon	CPU performance-monitoring counters
-#	pci	PCI configuration-space access from user mode
-#	ipl	ipfilter control devices (ipl, ipnat, ipstate, ipauth)
-#
-#	$Id: MAKEDEV,v 1.1.1.1 1998/07/14 07:30:51 abial Exp $
-#
-
-PATH=/sbin:/bin/:/usr/bin:/usr/sbin:$PATH
-umask 77
-
-# Usage: die exitcode msg
-die() {
-	echo $2
-	exit $1
-}
-
-# Convert integer to partition name
-dkitop() {
-	local p
-
-	case $1 in
-	0) p=a;; 1) p=b;; 2) p=c;; 3) p=d;; 4) p=e;; 5) p=f;; 6) p=g;; 7) p=h;;
-	*) p="?";;
-	esac
-	echo $p
-}
-
-# Convert integer to slice name
-dkitos() {
-	local s
-
-	case $1 in
-	0) s="";;
-	1) s="";;
-	*) s=s$(($1-1));;
-	esac
-	echo $s
-}
-
-# Convert disk (type, unit, slice, partition) to minor number
-dkminor()
-{
-	echo $(($1 << 25 | ($2 / 32) << 21 | ($2 % 32) << 3 | $3 << 16 | $4))
-}
-
-# Override mknod(2) to add extra handling to it.
-mknod() {
-	rm -f "$1" || exit 1
-	/sbin/mknod "$@" || die 2 "/sbin/mknod $@ failed"
-	chown root.wheel "$1" || exit 1
-}
-
-# Convert the last character of a tty name to a minor number.
-ttyminor()
-{
-	case $unit in
-	[0-9]) m=$unit;;
-	a) m=10;; b) m=11;; c) m=12;; d) m=13;; e) m=14;; f) m=15;; g) m=16;;
-	h) m=17;; i) m=18;; j) m=19;; k) m=20;; l) m=21;; m) m=22;; n) m=23;;
-	o) m=24;; p) m=25;; q) m=26;; r) m=27;; s) m=28;; t) m=29;; u) m=30;;
-	v) m=31;;
-	*) m="?";;
-	esac
-	echo $m
-}
-
-# Raw partition for disks
-dkrawpart=2
-
-# Compatibility slice for disks
-dkcompatslice=0
-
-# Raw slice for disks
-dkrawslice=1
-
-# Control bit for SCSI
-scsictl=$((1 << 29))
-
-# Standard umasks
-disk_umask=037			# allow group operator to read disks
-tape_umask=017			# allow group operator to read/write tapes
-
-for i in $*; do
-case $i in
-
-all)
-	sh MAKEDEV std					# standard
-	sh MAKEDEV fd0 fd1				# bdev, floppy disk
-	sh MAKEDEV sd0 sd1 sd2 sd3 wd0 wd1 wd2 wd3	# bdev, ordinary disk
-	sh MAKEDEV od0					# bdev, optical disk
-	sh MAKEDEV wfd0					# bdev, LS-120 floppy
-	sh MAKEDEV vn0					# bdev, virtual disk
-	sh MAKEDEV cd0 matcd0 mcd0 scd0 wcd0		# bdev, cdrom
-	sh MAKEDEV ft0 st0 wt0				# bdev, tape
-	sh MAKEDEV vty4					# cdev, virtual tty
-	sh MAKEDEV cuaa0 cuaa1 cuaa2 cuaa3		# cdev, serial tty
-	sh MAKEDEV pty0					# cdev, pseudo tty
-	sh MAKEDEV ttyd0 ttyd1 ttyd2 ttyd3		# cdev, serial tty
-	sh MAKEDEV mse0 psm0 sysmouse			# cdev, mouse
-	sh MAKEDEV pcaudio speaker			# cdev, noise
-	sh MAKEDEV lpt0 lpt1 lpt2			# cdev, printer
-	sh MAKEDEV bpf0 ipl tun0			# cdev, network
-	sh MAKEDEV ch0 perfmon tw0			# cdev, miscellaneous
-	sh MAKEDEV apm card0 card1			# cdev, laptop
-	;;
-std)
-	mknod console	c 0 0;	chmod 600 console
-	mknod drum	c 4 0;	chmod 640 drum;		chgrp kmem drum
-	mknod kmem	c 2 1;	chmod 640 kmem;		chgrp kmem kmem
-	mknod mem	c 2 0;	chmod 640 mem;		chgrp kmem mem
-	mknod null	c 2 2;	chmod 666 null
-	mknod random	c 2 3;	chmod 644 random
-	mknod urandom	c 2 4;	chmod 644 urandom
-	mknod zero	c 2 12;	chmod 666 zero
-	mknod io	c 2 14;	chmod 600 io
-	mknod tty	c 1 0;	chmod 666 tty
-	mknod klog	c 7 0;	chmod 600 klog
-	mknod stdin	c 22 0; chmod 666 stdin
-	mknod stdout	c 22 1; chmod 666 stdout
-	mknod stderr	c 22 2; chmod 666 stderr
-	mknod lkm	c 32 0;	chmod 644 lkm
-	mknod pci	c 78 0; chmod 644 pci
-	mkdir -p fd
-	(cd fd && eval `echo "" | awk ' BEGIN { \
-		for (i = 0; i < 64; i++) \
-			printf("mknod %d c 22 %d;", i, i)}'`)
-	chown -R bin.bin fd
-	chmod 555 fd
-	chmod 666 fd/*
-	;;
-
-mach-4)
-	mknod iopl c 22 0
-	mknod kbd c 23 0
-	mknod mouse c 24 0
-	mknod time c 25 0
-	mknod timezone c 26 0
-	;;
-
-# Create device files for new Archive/Wangtek QIC-02 tape driver (vak)
-wt*)
-	umask $tape_umask
-	u=`expr $i : '..\(.*\)'`
-	if [ x$u = x ]; then u=0; fi
-	mknod rwt${u}   c 10 `expr  0 + $u`	# default density, 512b blocks
-	mknod nrwt${u}  c 10 `expr  4 + $u`
-#	mknod rWt${u}   c 10 `expr 64 + $u`	# default density, 1024b blocks
-#	mknod nrWt${u}  c 10 `expr 68 + $u`
-	mknod rwt${u}b  c 10 `expr 16 + $u`	# 60 megabytes
-	mknod nrwt${u}b c 10 `expr 20 + $u`
-	mknod rwt${u}c  c 10 `expr 24 + $u`	# 120 megabytes
-	mknod nrwt${u}c c 10 `expr 28 + $u`
-	mknod rwt${u}d  c 10 `expr 32 + $u`	# 150 megabytes
-	mknod nrwt${u}d c 10 `expr 36 + $u`
-#	mknod rwt${u}e  c 10 `expr 40 + $u`	# 300 megabytes?
-#	mknod nrwt${u}e c 10 `expr 44 + $u`
-#	mknod rwt${u}f  c 10 `expr 48 + $u`	# 600 megabytes?
-#	mknod nrwt${u}f c 10 `expr 52 + $u`
-	chgrp operator r[Ww]t$u nr[Ww]t$u r[Ww]t$u[a-f] nr[Ww]t$u[a-f]
-	umask 77
-	;;
-
-# Individual slices.
-od*s*|sd*s*|vn*s*|wd*s*|wfd*s*)
-	umask $disk_umask
-	case $i in
-	od*s*) name=od; blk=20; chr=70;;
-	sd*s*) name=sd; blk=4;  chr=13;;
-	wd*s*) name=wd; blk=0;  chr=3;;
-	vn*s*) name=vn; blk=15; chr=43;;
-	wfd*s*) name=wfd; blk=1; chr=87;;
-	esac
-	case $i in
-	wfd*s*)
-		unit=`expr $i : '...\([0-9]*\)s'`
-		slice=`expr $i : '...[0-9]*s\([0-9]*\)'`
-		part=`expr $i : '...[0-9]*s[0-9]*\(.*\)'`
-		;;
-	*)
-		unit=`expr $i : '..\([0-9]*\)s'`
-		slice=`expr $i : '..[0-9]*s\([0-9]*\)'`
-		part=`expr $i : '..[0-9]*s[0-9]*\(.*\)'`
-		;;
-	esac
-	case $unit in
-	[0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
-		case $slice in
-		[0-9]|[1-2][0-9]|30)
-			oldslice=$slice
-			slice=$(($slice+1))
-			slicename=`dkitos $slice`
-			minor=`dkminor 0 $unit $slice $dkrawpart`
-			mknod  $name$unit$slicename b $blk $minor
-			mknod r$name$unit$slicename c $chr $minor
-			case $part in
-			[a-h])
-				case $oldslice in
-				0) slice=$oldslice ;;
-				esac
-				for part in 0 1 2 3 4 5 6 7
-				do
-					minor=`dkminor 0 $unit $slice $part`
-					partname=`dkitop $part`
-					mknod  $name$unit$slicename$partname \
-					      b $blk $minor
-					mknod r$name$unit$slicename$partname \
-					      c $chr $minor
-				done
-				;;
-			"")
-				;;
-			*)
-				echo bad partition for disk in: $i
-				;;
-			esac
-			chgrp operator $name$unit$slicename* \
-				      r$name$unit$slicename*
-			;;
-		*)
-			echo bad slice for disk in: $i
-			;;
-		esac
-		;;
-	*)
-		echo bad unit for disk in: $i "(unit=$unit, slice=$slice, part=$part)"
-		;;
-	esac
-	umask 77
-	;;
-
-fd*)
-	umask $disk_umask
-	unit=`expr $i : '..\(.*\)'`
-	name=fd; blk=2; chr=9
-	case $unit in
-	0|1|2|3)
-		mknod ${name}${unit}   b $blk `expr $unit '*' 64`
-		mknod r${name}${unit}  c $chr `expr $unit '*' 64`
-		# Fake BSD partitions
-		for i in a b c d e f g h
-		do
-			ln ${name}${unit} ${name}${unit}$i
-			ln r${name}${unit} r${name}${unit}$i
-		done
-		# User-readable and programmer-readable name sets
-
-		mknod ${name}${unit}.1720  b $blk `expr $unit '*' 64 + 1`
-		mknod r${name}${unit}.1720 c $chr `expr $unit '*' 64 + 1`
-		# ln ${name}${unit}.1720 ${name}${unit}135hs21
-		# ln r${name}${unit}.1720 r${name}${unit}135hs21
-
-		mknod ${name}${unit}.1480  b $blk `expr $unit '*' 64 + 2`
-		mknod r${name}${unit}.1480 c $chr `expr $unit '*' 64 + 2`
-		# ln ${name}${unit}.1480 ${name}${unit}135hs18
-		# ln r${name}${unit}.1480 r${name}${unit}135hs18
-		# ln ${name}${unit}.1480 ${name}${unit}96hs18
-		# ln r${name}${unit}.1480 r${name}${unit}96hs18
-
-		mknod ${name}${unit}.1440  b $blk `expr $unit '*' 64 + 3`
-		mknod r${name}${unit}.1440 c $chr `expr $unit '*' 64 + 3`
-		# ln ${name}${unit}.1440 ${name}${unit}135
-		# ln r${name}${unit}.1440 r${name}${unit}135
-		# ln ${name}${unit}.1440 ${name}${unit}135ds18
-		# ln r${name}${unit}.1440 r${name}${unit}135ds18
-		# ln ${name}${unit}.1440 ${name}${unit}96ds18
-		# ln r${name}${unit}.1440 r${name}${unit}96ds18
-
-		mknod ${name}${unit}.1200  b $blk `expr $unit '*' 64 + 4`
-		mknod r${name}${unit}.1200 c $chr `expr $unit '*' 64 + 4`
-		# ln ${name}${unit}.1200 ${name}${unit}96
-		# ln r${name}${unit}.1200 r${name}${unit}96
-		# ln ${name}${unit}.1200 ${name}${unit}96ds15
-		# ln r${name}${unit}.1200 r${name}${unit}96ds15
-		# ln ${name}${unit}.1200 ${name}${unit}135ds15
-		# ln r${name}${unit}.1200 r${name}${unit}135ds15
-
-		mknod ${name}${unit}.820  b $blk `expr $unit '*' 64 + 5`
-		mknod r${name}${unit}.820 c $chr `expr $unit '*' 64 + 5`
-		# ln ${name}${unit}.820 ${name}${unit}96hs10
-		# ln r${name}${unit}.820 r${name}${unit}96hs10
-		# ln ${name}${unit}.820 ${name}${unit}135hs10
-		# ln r${name}${unit}.820 r${name}${unit}135hs10
-
-		mknod ${name}${unit}.800  b $blk `expr $unit '*' 64 + 6`
-		mknod r${name}${unit}.800 c $chr `expr $unit '*' 64 + 6`
-		# ln ${name}${unit}.800 ${name}${unit}96ds10
-		# ln r${name}${unit}.800 r${name}${unit}96ds10
-		# ln ${name}${unit}.800 ${name}${unit}135ds10
-		# ln r${name}${unit}.800 r${name}${unit}135ds10
-
-		mknod ${name}${unit}.720  b $blk `expr $unit '*' 64 + 7`
-		mknod r${name}${unit}.720 c $chr `expr $unit '*' 64 + 7`
-		# ln ${name}${unit}.720 ${name}${unit}96ds9
-		# ln r${name}${unit}.720 r${name}${unit}96ds9
-		# ln ${name}${unit}.720 ${name}${unit}135ds9
-		# ln r${name}${unit}.720 r${name}${unit}135ds9
-
-		mknod ${name}${unit}.360  b $blk `expr $unit '*' 64 + 8`
-		mknod r${name}${unit}.360 c $chr `expr $unit '*' 64 + 8`
-		# ln ${name}${unit}.360 ${name}${unit}48
-		# ln r${name}${unit}.360 r${name}${unit}48
-		# ln ${name}${unit}.360 ${name}${unit}48ds9
-		# ln r${name}${unit}.360 r${name}${unit}48ds9
-
-		chgrp operator ${name}${unit}* r${name}${unit}*
-		;;
-	*)
-		echo bad unit for disk in: $i
-		;;
-	esac
-	umask 77
-	;;
-
-ft*)
-	umask $tape_umask
-	unit=`expr $i : '..\(.*\)'`
-	name=ft; blk=2; chr=9
-	case $unit in
-	0|1|2|3)
-		mknod ${name}${unit}   b $blk `expr $unit '*' 64 + 32`
-		mknod r${name}${unit}  c $chr `expr $unit '*' 64 + 32`
-		ln ${name}${unit} ${name}${unit}a
-		ln r${name}${unit} r${name}${unit}a
-		chgrp operator ${name}${unit}* r${name}${unit}*
-		;;
-	*)
-		echo bad unit for tape in: $i
-		;;
-	esac
-	umask 77
-	;;
-
-od*|sd*|vn*|wd*|wfd*)
-	umask $disk_umask
-	case $i in
-	od*) name=od; blk=20; chr=70;;
-	sd*) name=sd; blk=4;  chr=13;;
-	vn*) name=vn; blk=15; chr=43;;
-	wd*) name=wd; blk=0;  chr=3;;
-	wfd*) name=wfd; blk=1; chr=87;;
-	esac
-	case $i in
-	wfd*)
-		unit=`expr $i : '...\(.*\)'`
-		;;
-	*)
-		unit=`expr $i : '..\(.*\)'`
-		;;
-	esac
-	case $unit in
-	[0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
-		for slicepartname in s0h s1 s2 s3 s4
-		do
-			sh MAKEDEV $name$unit$slicepartname
-		done
-		case $name in
-		od|sd)
-			minor=`dkminor 0 $unit 0 0`
-			mknod r${name}${unit}.ctl c $chr $(($minor | $scsictl))
-			chmod 600 r${name}${unit}.ctl
-			;;
-		esac
-		;;
-	*)
-		echo bad unit for disk in: $i
-		;;
-	esac
-	umask 77
-	;;
-
-ccd*)
-	umask $disk_umask
-	name=ccd
-	blk=21; chr=74
-	unit=`expr $i : '...\(.*\)'`
-	case $unit in
-	[0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
-		for part in 0 1 2 3 4 5 6 7
-		do
-			minor=`dkminor 0 $unit 0 $part` 
-			partname=`dkitop $part`
-			mknod  $name$unit$partname b $blk $minor
-			mknod r$name$unit$partname c $chr $minor
-		done
-		chgrp operator ${name}${unit}[a-h] r${name}${unit}[a-h]
-		;;
-	*)
-		echo bad unit for disk in: $i
-		;;
-	esac
-	umask 77
-	;;
-
-ssc*)
-	mknod ssc c 49 0
-	;;
-
-uk*)
-	unit=`expr $i : 'uk\(.*\)'`
-	mknod uk$unit c 31 $unit
-	;;
-
-worm*)
-	umask $disk_umask
-	unit=`expr $i : 'worm\(.*\)'`
-	if [ "X${unit}" = "X" ]; then
-		unit=0
-	fi
-	chr=62
-	blk=23
-	name=worm
-	mknod ${name}${unit} b $blk ${unit}
-	mknod r${name}${unit} c $chr ${unit}
-	chgrp operator ${name}${unit} r${name}${unit}
-	umask 077
-	mknod r${name}${unit}.ctl c $chr `expr $unit + $scsictl `
-	;;
-
-# SCSI processor type driver
-pt[0-9]*)
-	chr=61
-	name=pt
-	unit=`expr $i : 'pt\([0-9][0-9]*\)'`
-	if [ "X${unit}" = "X" ]; then
-		unit=0
-	fi
-	unit=`expr $unit + 1 - 1`
-	mknod ${name}${unit} c $chr $unit
-	mknod ${name}${unit}.ctl c $chr `expr $unit + $scsictl `
-	;;
-
-pty*)
-	class=`expr $i : 'pty\(.*\)'`
-	case $class in
-	0) offset=0 name=p;;
-	1) offset=32 name=q;;
-	2) offset=64 name=r;;
-	3) offset=96 name=s;;
-# Note that xterm (at least) only look at p-s.
-	4) offset=128 name=P;;
-	5) offset=160 name=Q;;
-	6) offset=192 name=R;;
-	7) offset=224 name=S;;
-	# This still leaves [tuTU].
-	*) echo bad unit for pty in: $i;;
-	esac
-	case $class in
-	0|1|2|3|4|5|6|7)
-		umask 0
-		eval `echo $offset $name | awk ' { b=$1; n=$2 } END { \
-			for (i = 0; i < 32; i++) {
-				c = substr("0123456789abcdefghijklmnopqrstuv", i + 1, 1); \
-				printf("mknod tty%s%s c 5 %d; \
-					mknod pty%s%s c 6 %d;", \
-					n, c, b+i, \
-					n, c, b+i); \
-			} \
-		}'`
-		umask 77
-		;;
-	esac
-	;;
-
-st*)
-	umask $tape_umask
-	unit=`expr $i : '..\(.*\)'`
-	chr=14
-
-	case $unit in
-	0|1|2|3|4|5|6)
-		for mode in 0 1 2 3
-		do
-			mknod rst${unit}.${mode} c $chr `expr $unit '*' 16 + $mode '*' 4 + 0`
-			mknod nrst${unit}.${mode} c $chr `expr $unit '*' 16 + $mode '*' 4 + 1`
-			mknod erst${unit}.${mode} c $chr `expr $unit '*' 16 + $mode '*' 4 + 2`
-			mknod st${unit}ctl.${mode} c $chr `expr $unit '*' 16 + $mode '*' 4 + 3`
-			chgrp operator	rst${unit}.${mode}\
-					nrst${unit}.${mode} \
-					erst${unit}.${mode} \
-					st${unit}ctl.${mode}
-			chmod 600	st${unit}ctl.${mode}
-		done
-		mknod rst${unit}.ctl c $chr `expr $unit '*' 16 + $scsictl `
-		chmod 600 rst${unit}.ctl
-
-		ln rst${unit}.0 rst${unit}
-		ln nrst${unit}.0 nrst${unit}
-		ln erst${unit}.0 erst${unit}
-		;;
-	*)
-		echo bad unit for tape in: $i
-		;;
-	esac
-	umask 77
-	;;
-
-ch*)
-	umask 37
-	unit=`expr $i : '..\(.*\)'`
-	case $i in
-	ch*) name=ch;  chr=17;;
-	esac
-	case $unit in
-	0|1|2|3|4|5|6)
-		mknod ${name}${unit}	c $chr `expr $unit '*' 16 + 0`
-		chgrp operator ${name}${unit}
-		mknod r${name}${unit}.ctl c $chr `expr $unit '*' 16 + $scsictl `
-		chmod 600 r${name}${unit}.ctl
-		;;
-	*)
-		echo bad unit for media changer in: $i
-		;;
-	esac
-	umask 77
-	;;
-
-cd*|mcd*|scd*)
-	umask $disk_umask
-	case $i in
-	cd*) unit=`expr $i : '..\(.*\)'`; name=cd; blk=6; chr=15;;
-	mcd*) unit=`expr $i : '...\(.*\)'`; name=mcd; blk=7; chr=29;;
-	scd*) unit=`expr $i : '...\(.*\)'`; name=scd; blk=16; chr=45;;
-	esac
-	case $unit in
-	0|1|2|3|4|5|6)
-		mknod ${name}${unit}a	b $blk `expr $unit '*' 8 + 0`
-		mknod ${name}${unit}c	b $blk `expr $unit '*' 8 + 2`
-		mknod r${name}${unit}a	c $chr `expr $unit '*' 8 + 0`
-		mknod r${name}${unit}c	c $chr `expr $unit '*' 8 + 2`
-		chgrp operator ${name}${unit}[a-h] r${name}${unit}[a-h]
-		case $name in
-		cd)
-			mknod r${name}${unit}.ctl c $chr `expr $unit '*' 8 + $scsictl `
-			chmod 600 r${name}${unit}.ctl
-			;;
-		esac
-		;;
-	*)
-		echo bad unit for disk in: $i
-		;;
-	esac
-	umask 77
-	;;
-
-matcd*)
-	umask 2
-	case $i in
-	matcd*) unit=`expr $i : '.....\(.*\)'`; name=matcd; blk=17; chr=46;;
-	esac
-	case $unit in
-	0|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15)
-		mknod ${name}${unit}a	b $blk `expr $unit '*' 8 + 0`
-		mknod ${name}${unit}c   b $blk `expr $unit '*' 8 + 2`
-		mknod r${name}${unit}a	c $chr `expr $unit '*' 8 + 0`
-		mknod r${name}${unit}c  c $chr `expr $unit '*' 8 + 2`
-		chgrp operator ${name}${unit}[a-h] r${name}${unit}[a-h]
-		chmod 640 ${name}${unit}[a-h] r${name}${unit}[a-h]
-
-		mknod ${name}${unit}la  b $blk `expr $unit '*' 8 + 128`
-		mknod ${name}${unit}lc  b $blk `expr $unit '*' 8 + 130`
-		mknod r${name}${unit}la c $chr `expr $unit '*' 8 + 128`
-		mknod r${name}${unit}lc c $chr `expr $unit '*' 8 + 130`
-		chgrp operator ${name}${unit}l[a-h] r${name}${unit}l[a-h]
-		chmod 640 ${name}${unit}l[a-h] r${name}${unit}l[a-h]
-		;;
-	*)
-		echo bad unit for disk in: $i
-		;;
-	esac
-	umask 77
-	;;
-
-wcd*)
-	umask 2 ;
-	unit=`expr $i : '...\(.*\)'`
-	blk=19
-	chr=69
-	case $unit in
-	0|1|2|3)
-		mknod wcd${unit}a  b $blk `expr $unit '*' 8 + 0`
-		mknod rwcd${unit}a c $chr `expr $unit '*' 8 + 0`
-		mknod wcd${unit}c  b $blk `expr $unit '*' 8 + 2`
-		mknod rwcd${unit}c c $chr `expr $unit '*' 8 + 2`
-		chgrp operator wcd${unit}[a-h] rwcd${unit}[a-h]
-		chmod 640 wcd${unit}[a-h] rwcd${unit}[a-h]
-		;;
-	*)
-		echo bad unit for disk in: $i
-		;;
-	esac
-	umask 77
-	;;
-
-lpt*)
-	unit=`expr $i : 'lpt\(.*\)'`
-	mknod lpt$unit c 16 $unit
-	mknod lpctl$unit c 16 `expr $unit + 128`
-	;;
-
-tw*)
-	unit=`expr $i : 'tw\(.*\)'`
-	mknod tw$unit c 19 $unit
-	chgrp operator tw$unit
-	;;
-
-# Use this to create virtual consoles for syscons, pcvt or codrv
-# ttyv0-b
-# use as MAKEDEV vtyNN to create NN entries
-vty*)
-	chr=12
-	units=`expr $i : 'vty\(.*\)'`
-	eval `echo ${chr} ${units} | awk ' { c=$1; n=$2 } END {
-		for (i = 0; i < n; i++)
-			printf("mknod ttyv%01x c %d %d;", i, c, i); }'`
-	ln -fs ttyv0 vga	# XXX X still needs this pccons relic
-	;;
-
-bpf*)
-	unit=`expr $i : 'bpf\(.*\)'`
-	mknod bpf$unit c 23 $unit
-	;;
-
-speaker)
-	mknod speaker c 26 0
-	;;
-
-cuaa?|cua?)
-	umask 7
-	unit=`expr $i : 'cua.*\(.\)$'`
-	m=`ttyminor $unit`
-	mknod cuaa$unit c 28 `expr $m + 128`
-	mknod cuaia$unit c 28 `expr $m + 32 + 128`
-	mknod cuala$unit c 28 `expr $m + 64 + 128`
-	chown uucp.dialer cua*a$unit
-	umask 77
-	;;
-
-tty0?|ttyd?|tty?)
-	unit=`expr $i : 'tty.*\(.\)$'`
-	m=`ttyminor $unit`
-	mknod ttyd$unit c 28 $m
-	mknod ttyid$unit c 28 `expr $m + 32`
-	mknod ttyld$unit c 28 `expr $m + 64`
-	;;
-
-cuac?)
-	umask 7
-	portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f
-		  g h i j k l m n o p q r s t u v"
-	major=48
-	card=`expr $i : 'cua.*\(.\)$'`
-	for unit in $portlist
-	do
-		minor=`ttyminor $unit`
-		minor=`expr $card \* 65536 + $minor`
-		name=$card$unit
-		mknod cuac$name c $major `expr $minor + 128`
-		mknod cuaic$name c $major `expr $minor + 32 + 128`
-		mknod cualc$name c $major `expr $minor + 64 + 128`
-		chown uucp.dialer cuac$name cuaic$name cualc$name
-	done
-	umask 77
-	;;
-
-ttyc?)
-	portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f
-		  g h i j k l m n o p q r s t u v"
-	major=48
-	card=`expr $i : 'tty.*\(.\)$'`
-	for unit in $portlist
-	do
-		minor=`ttyminor $unit`
-		minor=`expr $card \* 65536 + $minor`
-		name=$card$unit
-		mknod ttyc$name c $major $minor
-		mknod ttyic$name c $major `expr $minor + 32`
-		mknod ttylc$name c $major `expr $minor + 64`
-	done
-	;;
-
-# RISCom8 'rc' driver entries
-
-cuam?)
-	umask 7
-	unit=`expr $i : 'cua.*\(.\)$'`
-	m=`ttyminor $unit`
-	mknod cuam$unit c 63 `expr $m + 128`
-	chown uucp.dialer cuam$unit
-	umask 77
-	;;
-
-ttym?)
-	unit=`expr $i : 'tty.*\(.\)$'`
-	m=`ttyminor $unit`
-	mknod ttym$unit c 63 $m
-	;;
-
-# Specialix SI/XIO.
-# Note: these are 'base 1' to match the numbers on the panels, and to match
-#       the manual that comes with the system.
-ttyA*)
-	major=68
-	nports=`expr $i : 'ttyA\(.*\)$'`
-	port=1
-	while [ $port -le $nports ]; do
-		minor=`expr $port - 1`
-		name=`expr $port + 1000 | cut -c 3-4` 
-		mknod ttyA$name c $major $minor
-		mknod ttyiA$name c $major `expr $minor + 65536`
-		mknod ttylA$name c $major `expr $minor + 131072`
-		port=`expr $port + 1`
-	done
-	# For the user-mode control program, 'sicontrol'
-	mknod si_control c 68 262144
-	;;
-
-cuaA*)
-	umask 7
-	major=68
-	nports=`expr $i : 'cuaA\(.*\)$'`
-	port=1
-	while [ $port -le $nports ]; do
-		minor=`expr $port - 1`
-		name=`expr $port + 1000 | cut -c 3-4` 
-		mknod cuaA$name c $major `expr $minor + 128`
-		mknod cuaiA$name c $major `expr $minor + 128 + 65536`
-		mknod cualA$name c $major `expr $minor + 128 + 131072`
-		chown uucp.dialer cuaA$name cuaiA$name cualA$name
-		port=`expr $port + 1`
-	done
-	umask 77
-	;;
-
-# Digiboard PC/?? 16 port card.
-# The current scheme of minor numbering is:
-#
-#       unused{14} CARD{2} major{8} CALLOUT{1} LOCK{1} INIT{1} PORT{5}
-#
-#   CARD bitfield in future versions may be extended to 3 bits.
-#
-# See dgb(4)
-#
-ttyD?)
-	portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
-	major=58
-	card=`expr $i : 'tty.*\(.\)$'`
-	for unit in $portlist
-	do
-		minor=`ttyminor $unit`
-		minor=`expr $card \* 65536 + $minor`
-		name=$card$unit
-		mknod ttyD$name c $major $minor
-		mknod ttyiD$name c $major `expr $minor + 32`
-		mknod ttylD$name c $major `expr $minor + 64`
-	done
-	;;
-
-cuaD?)
-	umask 7
-	portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
-	major=58
-	card=`expr $i : 'cua.*\(.\)$'`
-	for unit in $portlist
-	do
-		minor=`ttyminor $unit`
-		minor=`expr $card \* 65536 + $minor`
-		name=$card$unit
-		mknod cuaD$name c $major `expr $minor + 128`
-		mknod cuaiD$name c $major `expr $minor + 32 + 128`
-		mknod cualD$name c $major `expr $minor + 64 + 128`
-		chown uucp.dialer cua*D$name
-	done
-	umask 77
-	;;
-
-ttyR?)
-	major=81
-	BOARD=1; MINOR=65536; Rnum=0
-	MINOR=`expr $BOARD \* 65536`
-	dmesg | grep ^RocketPort[0-4] > /tmp/rp_list
-	controllers=`awk '{print $1}' < /tmp/rp_list`
-	rm -f /dev/ttyR*; rm -f /dev/ttyiR*; rm -f /dev/ttylR*
-	for i in $controllers;do
- 	   ndevices=`grep ^$i /tmp/rp_list | sed -e 's/.* \([0-9]*\) ports/\1/'`
-	   echo -n "Creating $ndevices devices for $i: "
-	   for dev in `jot $ndevices 0`;do
-		   mknod /dev/ttyR$Rnum c $major $MINOR 
-		   mknod /dev/ttylR$Rnum c $major `expr $MINOR + 32`
-		   mknod /dev/ttyiR$Rnum c $major `expr $MINOR + 64` 
-		   Rnum=`expr $Rnum + 1`
-		   MINOR=`expr $MINOR + 1`
-	   done
-		BOARD=`expr $BOARD + 1`
-		MINOR=`expr $BOARD \* 65536`
-	   echo " "
-	done
-	;;
-
-cuaR?)
-	major=81
-	BOARD=1; MINOR=65536; Rnum=0
-	MINOR=`expr $BOARD \* 65536`
-	dmesg | grep ^RocketPort[0-4] > /tmp/rp_list
-	controllers=`awk '{print $1}' < /tmp/rp_list`
-	rm -f /dev/cuaR*; rm -f /dev/cuaiR*; rm -f /dev/cualR*
-	for i in $controllers;do
- 	   ndevices=`grep ^$i /tmp/rp_list | sed -e 's/.* \([0-9]*\) ports/\1/'`
-	   echo -n "Creating $ndevices devices for $i: "
-	   for dev in `jot $ndevices 0`;do
-		   mknod /dev/cuaR$Rnum c  $major `expr $MINOR + 128`
-		   mknod /dev/cualR$Rnum c $major `expr $MINOR + 128 + 32`
-		   mknod /dev/cuaiR$Rnum c $major `expr $MINOR + 128 + 64` 
-		   Rnum=`expr $Rnum + 1`
-		   MINOR=`expr $MINOR + 1`
-	   done
-		BOARD=`expr $BOARD + 1`
-		MINOR=`expr $BOARD \* 65536`
-	   echo " "
-	done
-	chown uucp.dialer /dev/cuaR*
-	;;
-
-mse*)
-	unit=`expr $i : 'mse\(.*\)'`
-	chr=27
-	mknod mse$unit c $chr `expr $unit '*' 2 + 1`	# non-blocking for X11
-	;;
-
-psm*)
-	unit=`expr $i : 'psm\(.*\)'`
-	chr=21
-	mknod psm$unit c $chr `expr $unit '*' 2 + 1`	# non-blocking for X11
-	;;
-
-mouse*)
-	name=`expr $i : 'mouse\(.*\)'`
-	if [ ! -c $name ]; then
-		$0 $name			# make the appropriate device
-	fi
-	ln -fs $name mouse
-	;;
-
-pcaudio)
-	mknod pcaudio c 24 0
-	mknod pcaudioctl c 24 128
-	;;
-
-socksys)
-	mknod socksys c 41 0
-	mknod spx c 41 1
-	ln -fs socksys nfsd
-	chmod 666 socksys nfsd spx
-	;;
-
-snd*)
-#
-# changes from Linux voxware
-# minor		Linux			FreeBSD
-# 8		sequencer2 (aka music0)	music0
-# 17		patmgr0			sequencer1
-# 33		patmgr1			sequencer2
-#
-
-	unit=`expr $i : 'snd\(.*\)'`
-	chr=30
-
-	# XXX write this less verbosely, like std
-	snd_security_hole=0	# XXX
-	umask $snd_security_hole
-
-	if [ $unit = "0" ] ; then
-		ln -fs mixer$unit mixer
-		ln -fs sequencer$unit sequencer
-		ln -fs dsp$unit dsp
-		ln -fs audio$unit audio
-		ln -fs dspW$unit dspW
-		ln -fs music$unit music
-		ln -fs pss$unit pss
-	fi
-
-	mknod mixer$unit	c $chr `expr $unit '*' 16 + 0`
-	mknod sequencer$unit	c $chr `expr $unit '*' 16 + 1`
-	mknod midi$unit		c $chr `expr $unit '*' 16 + 2`
-	mknod dsp$unit		c $chr `expr $unit '*' 16 + 3`
-	mknod audio$unit	c $chr `expr $unit '*' 16 + 4`
-	mknod dspW$unit		c $chr `expr $unit '*' 16 + 5`
-	mknod sndstat		c $chr 6
-				# minor number 7 is unused
-	mknod music$unit	c $chr `expr $unit '*' 16 + 8`
-	mknod pss$unit		c $chr `expr $unit '*' 16 + 9`
-				# minor numbers 10-15 are unused
-	umask 77
-	;;
-
-vat)
-	mknod vatio c 25 128
-	chmod 660 vatio
-	;;
-
-gsc*)
-	unit=`expr $i : 'gsc\(.*\)'`
-	mknod gsc${unit} c 47 $unit
-	mknod gsc${unit}p c 47 $(($unit + 8))
-	mknod gsc${unit}d c 47 $(($unit + 32))
-	mknod gsc${unit}pd c 47 $(($unit + 40))
-	chmod 666 gsc${unit}*
-	;;
-
-apm*)
-	chr=39
-	mknod apm c $chr 0
-	chgrp operator apm
-	chmod 660 apm
-	;;
-
-card*)
-	unit=`expr $i : 'card\(.*\)'`
-	chr=50
-	mknod card$unit c $chr $unit
-	chmod 644 card$unit
-	;;
-
-ttyx?|ttyy?|ttyz?)
-	case $i in
-	*0) unit=0;;	*1) unit=1;;	*2) unit=2;;	*3) unit=3;;
-	*4) unit=4;;	*5) unit=5;;	*6) unit=6;;	*7) unit=7;;
-	*8) unit=8;;	*9) unit=9;;	*a) unit=10;;	*b) unit=11;;
-	*c) unit=12;;	*d) unit=13;;	*e) unit=14;;	*f) unit=15;;
-	esac
-	case $i in
-	ttyy?)  unit=`expr $unit \+ 16`;;
-	ttyz?)  unit=`expr $unit \+ 32`;;
-	esac
-	mknod $i c 42 $unit
-	chown uucp.wheel $i
-	;;
-
-cronyx)
-	mknod cronyx c 42 63
-	;;
-
-joy)
-	mknod joy0 c 51 0
-	mknod joy1 c 51 1
-	chgrp operator joy0 joy1
-	chmod 640  joy0 joy1
-	;;
-
-spigot)
-	mknod spigot c 11 0
-	chmod 444 spigot
-	;;
-
-ctx?)
-	unit=`expr $i : 'ctx\(.*\)'`
-	mknod ctx$unit c 40 $unit
-	chmod 444 ctx$unit
-	;;
-
-meteor?)
-	unit=`expr $i : 'meteor\(.*\)'`
-	mknod meteor$unit c 67 $unit
-	chmod 444 meteor$unit
-	;;
-
-bktr?)
-	unit=`expr $i : 'bktr\(.*\)'`
-	mknod bktr$unit c 92 $unit
-	mknod tuner$unit c 92 $((16 + $unit ))
-	chmod 444 bktr$unit tuner$unit
-	;;
-
-tun*)
-	ntun=`expr $i : 'tun\(.*\)$'`
-	unit=0
-	while [ $unit -le $ntun ]; do
-		mknod tun$unit c 52 $unit
-		chown uucp.dialer tun$unit
-		unit=`expr $unit + 1`
-	done
-	;;
-
-sysmouse)
-	mknod sysmouse c 12 128
-	mknod consolectl c 12 255
-	;;
-
-snp?)
-	unit=`expr $i : 'snp\(.*\)'`
-	mknod snp$unit c 53 $unit
-	;;
-
-# dufault@hda.com: If I do much more work on other A-D boards
-# then eventually we'll have a "ad" and "dio" interface and some of these
-# "labpcaio" ones will be gone.
-# labpcaio: D-A and A-D.
-# labpcdio: Digital in and Digital out.
-#
-labpc*)
-	umask 7
-	case $i in
-	labpcaio*)
-		name=labpcaio
-		unit=`expr $i : 'labpcaio\(.*\)'`
-		all="0 1 2 3 4 5 6 7"
-		offset=0
-		;;
-	labpcdio*)
-		name=labpcdio
-		unit=`expr $i : 'labpcdio\(.*\)'`
-		all="0 1 2 3"
-		offset=8
-		;;
-	*)
-		die 3 "Don't know LabPC type $i"
-		;;
-	esac
-	if [ "X${unit}" = "X" ]; then
-		unit=all
-	fi
-	case $unit in
-		0|1|2|3|4|5|6|7)
-				mknod $name$unit c 66 `expr $offset + $unit `
-		;;
-		all)
-			for i in $all
-			do
-				mknod $name$i c 66 `expr $offset + $i `
-			done
-			;;
-		*)
-			echo "No such LabPC unit: $unit"
-			;;
-	esac
-	umask 77
-	;;
-
-perfmon)
-	mknod perfmon c 2 32
-	chgrp kmem perfmon
-	chmod 640 perfmon
-	;;
-
-ipl)
-	mknod ipl c 79 0
-	mknod ipnat c 79 1
-	mknod ipstate c 79 2
-	mknod ipauth c 79 3
-	;;
-
-local)
-	umask 0			# XXX should be elsewhere
-	sh MAKEDEV.local
-	umask 77
-	;;
-
-*)
-	echo $i - no such device name
-	;;
-
-esac
-done
-- 
cgit v1.2.3