From f3ac09ee9a8675459d6d0c6fb58058a10a3d3e90 Mon Sep 17 00:00:00 2001 From: "Jordan K. Hubbard" Date: Wed, 16 Nov 1994 07:51:45 +0000 Subject: 1. Split these scripts into smaller distinct functional units that will be callable _after_ installation in 2.1's system admin tools. This is almost totally revamped now. 2. Support installation from DOS partition or floppy. 3. Many stray bogons eliminated. Perhaps a few introduced. One more rev should fix this up, once I've spammed my test machine a couple of times. 4. Installation from CD now *really* possible. 5. Allow user to specify arbitary subdirectories for NFS mountpoints - UFS, NFS and CD distributions now share many common elements. --- release/bininst | 567 ++++----------------------------------------------- release/instdist.sh | 401 ++++++++++++++++++++++++++++++++++++ release/miscfuncs.sh | 86 ++++++++ release/netinst.sh | 174 ++++++++++++++++ 4 files changed, 698 insertions(+), 530 deletions(-) create mode 100644 release/instdist.sh create mode 100644 release/miscfuncs.sh create mode 100644 release/netinst.sh diff --git a/release/bininst b/release/bininst index 8ff83845c924..a9c820897c0b 100755 --- a/release/bininst +++ b/release/bininst @@ -13,552 +13,52 @@ # putting your name on top after doing something trivial like reindenting # it, just to make it look like you wrote it!). # -# $Id: bininst,v 1.37 1994/11/13 07:27:35 jkh Exp $ +# $Id: bininst,v 1.38 1994/11/15 13:40:00 jkh Exp $ -# Some useful constants. -PATH=/usr/bin:/usr/sbin:/bin:/sbin:/stand -export PATH - -TAR=tar -TAR_FLAGS=xvf +if [ "$_BININST_LOADED_" = "yes" ]; then + echo "Error, $0 loaded more than once!" + return 1 +else + _BININST_LOADED_=yes +fi +# Set some useful variables +HOME=/; export HOME TMP=/tmp -IFCONFIG=ifconfig - -ROUTE=route -ROUTE_FLAGS="add default" -HOME=/ -export HOME +# Grab the miscellaneous functions. +. miscfuncs.sh +# Grab the installation routines +. instdist.sh -interrupt() { - if dialog --clear --title "User Interrupt Requested" \ - --yesno "Do you wish to abort the installation?" 5 70; then - exit 0; - fi -} +# Grab the network setup routines +. netinst.sh # Deal with trigger-happy users. trap interrupt 1 2 15 -# Set the initial state of the system. +# set initial defaults set_defaults() { - media_type="" - media_device="" - clear="--clear" - ipaddr="" - hostname="" - ether_intr="" - domain="" - netmask="0xffffff00" - ifconfig_flags="" - remote_hostip="" - tmp_dir="/usr/tmp" - ftp_path="ftp://ftp.freebsd.org/pub/FreeBSD/2.0-ALPHA/bindist" - nfs_path="" - cdrom_path="" - serial_interface="/dev/tty00" - serial_speed="38400" + set_media_defaults installing=1 mkdir -p ${TMP} cp /stand/etc/* /etc } -# Handle the return value from a dialog, doing some pre-processing -# so that each client doesn't have to. -handle_rval() { - case $1 in - 0) - return 0 - ;; - 255) - PS1="subshell# " /stand/sh - ;; - *) - return 1 - ;; - esac -} - -# A simple user-confirmation dialog. -confirm() { - dialog --title "User Confirmation" --msgbox "$*" 8 72 -} - -# A simple message box dialog. -message() { - dialog --title "Progress" --infobox "$*" 5 72 -} - -# A simple error dialog. -error() { - dialog --title "Error!" --msgbox "$*" 10 72 -} - -# Something isn't supported yet! :-( -not_supported() { - dialog --title "Sorry!" \ - --msgbox "This feature is not supported in the current version of the \ -installation tools. Barring some sort of fatal accident, we do \ -expect it to be in the release. Please press RETURN to go on." 10 60 -} - -# Get a string from the user -input() -{ - dialog --title "$title" $clear \ - --inputbox "$*" 17 72 "$default_value" 2> ${TMP}/inputbox.tmp.$$ - if ! handle_rval $?; then rm -f ${TMP}/inputbox.tmp.$$; return 1; fi - answer=`cat ${TMP}/inputbox.tmp.$$` - rm -f ${TMP}/inputbox.tmp.$$ -} - -# Ask a networking question -network_dialog() -{ - title="Network Configuration" - if ! input "$*"; then return 1; fi -} - # Print welcome banner. welcome() { dialog --title "Welcome to FreeBSD!" $clear \ ---msgbox " We're now ready to install one or more packed distribution -sets onto your machine. At the minimum, you need a bindist -distribution, though a secrdist is also useful if you want your -system to use the same DES and/or Kerberos security model used -by other commercial systems (though the md5 based FreeBSD model -is not bad in and of itself). The secrdist is also a bit of a -special case since it cannot be legally obtained via U.S. ftp -sites from outside the U.S. due to export restrictions, but -non-U.S. versions are also available. See the release notes for -more information on obtaining a secrdist for your part of the -world. If you wish to run a 1.x binary (and can't simply recompile -it from source), it's also recommended that you install the -compat1xdist. If you're interested in doing FreeBSD development, -a srcdist is also very highly recommended! Finally, many useful -pre-compiled packages are available and may be obtained from: - - ftp://ftp.freebsd.org/pub/FreeBSD/2.0-ALPHA/packages" 22 72 - if ! handle_rval $?; then return 1; fi -} - -# Get values into $media_type and $media_device. Call network initialization -# if necessary. -choose_media() { - while [ "$media_device" = "" ]; do - - dialog $clear --title "Installation From" \ ---menu "Before installing a distribution, you need to chose \n\ -and/or configure your method of installation. Please pick from \n\ -one of the following options. If none of the listed options works \n\ -for you then your best bet may be to simply hit ESC twice to get \n\ -a subshell and proceed manually on your own. If you are already \n\ -finished with installation, select cancel to go on.\n\n\ - Please choose one of the following:" 20 72 7 \ - "?Kern" "Please show me the kernel boot messages again!" \ - "Tape" "Load distribution from SCSI, QIC or floppy tape" \ - "CDROM" "Load distribution from SCSI or Mitsumi CDROM" \ - "DOS" "Load from DOS floppies or a DOS hard disk partition" \ - "FTP" "Load distribution using FTP" \ - "UFS" "Load the distribution from existing UFS partition" \ - "NFS" "Load the distribution over NFS" 2> ${TMP}/menu.tmp.$$ - retval=$? - choice=`cat ${TMP}/menu.tmp.$$` - rm -f ${TMP}/menu.tmp.$$ - if ! handle_rval $retval; then return 1; fi - - case $choice in - ?Kern) - if dmesg > ${TMP}/dmesg.out; then - dialog $clear \ - --title "What do I have in this machine again?" \ - --textbox ${TMP}/dmesg.out 22 76 - else - error "Couldn't get dmesg information! :-(" - fi - ;; - - Tape) - dialog $clear --title "Chose Tape Type" \ ---menu "Which type of tape drive do you have attached to your \n\ -system? FreeBSD supports the following types:\n\n\ - Choose one of the following:" 20 72 3 \ - "SCSI" "SCSI tape drive attached to supported SCSI controller" \ - "QIC" "QIC tape drive (Colorado Jumbo, etc)" \ - "floppy" "Floppy tape drive" \ - 2> ${TMP}/menu.tmp.$$ - retval=$? - choice=`cat ${TMP}/menu.tmp.$$` - rm -f ${TMP}/menu.tmp.$$ - if ! handle_rval $retval; then continue; fi - media_type=tape; - case $choice in - SCSI) - media_device=/dev/rst0 - ;; - QIC) - media_device=/dev/rwt0 - ;; - floppy) - media_device=ftape - ;; - esac - ;; - - CDROM) - dialog $clear --title "Chose CDROM Type" \ ---menu "Which type of CDROM drive do you have attached to your \n\ -system? FreeBSD supports the following types:\n\n\ - Choose one of the following:" 15 72 2 \ - "SCSI" "SCSI CDROM drive attached to supported SCSI controller" \ - "Mitsumi" "Mitsumi CDROM drive" \ - 2> ${TMP}/menu.tmp.$$ - retval=$? - choice=`cat ${TMP}/menu.tmp.$$` - rm -f ${TMP}/menu.tmp.$$ - if ! handle_rval $retval; then continue; fi - media_type=cdrom; - case $choice in - SCSI) - media_device=/dev/cd0a - ;; - Mitsumi) - media_device=/dev/mcd0a - ;; - esac - ;; - - DOS) - not_supported - ;; - - FTP) - if ! setup_network; then continue; fi - title="FTP Installation Information" - default_value="$ftp_path" - if ! input \ -"Please specify the machine and directory location of the -distribution you wish to load. This should be either a \"URL style\" -specification (e.g. ftp://ftp.freeBSD.org/pub/FreeBSD/...) or simply -the name of a host to connect to. If only a host name is specified, -the installation assumes that you will properly connect and \"mget\" -the files yourself.\n\n"; then continue; fi - media_type=ftp - media_device=$answer - ftp_path=$media_device - ;; - - NFS) - if ! setup_network; then continue; fi - title="NFS Installation Information" - default_value="$nfs_path" - if ! input \ -"Please specify the machine and directory location of the -distribution you wish to load. This must be in machine:dir -format (e.g. zooey:/a/FreeBSD/bindist). The remote directory -must be be exported to your machine (or globally) for this to -work!\n\n"; then continue; fi - media_type=nfs - nfs_path=$answer - if ! mount_nfs $nfs_path /mnt > /dev/ttyv1 2>&1; then - error "Unable to mount $nfs_path" - else - media_device=$nfs_path - message "$nfs_path mounted successfully" - fi - ;; - - UFS) - dialog $clear --title "User Intervention Requested" --msgbox " -Please mount the filesystem you wish to use somewhere convenient and -exit the shell when you're through. I'll ask you for the location -of the distribution when we come back." 12 72 - dialog --clear - /stand/sh - title="Please enter directory" - default_value="/mnt/bindist" - if input "Ok, now give me the full pathname of the directory where you've got the distribution."; then - if [ ! -f $answer/extract.sh ]; then - error "That's not a valid distribution" - else - media_type=ufs - media_device=$answer - fi - fi - ;; - esac - done -} - -# Set the location of our temporary unpacking directory. -set_tmpdir() -{ - title="Chose temporary directory" - default_value="/usr/tmp" - if ! input \ -"Please specify the name of a directory containing enough free -space to hold the temporary files for this distribution. At -minimum, a binary distribution will require around 21MB of -temporary space. At maximum, a srcdist may take 40MB or more. -If the directory you specify does not exist, it will be created -for you. If you do not have enough free space to hold both the -packed and unpacked distribution files, consider using the NFS -or CDROM installation methods as they require no temporary -storage.\n\n"; then return 1; fi - tmp_dir=$answer - mkdir -p $tmp_dir - return 0 -} - -cd_tmpdir() -{ - if ! cd $tmp_dir; then - error "No such file or directory for ${tmp_dir}, sorry! Please fix this and try again." - return 1 - fi -} - -rm_tmpdir() -{ - if dialog --title "Delete contents?" $clear \ - --yesno "Do you wish to delete the contents of ${tmp_dir}?" 5 72; then - rm -rf $tmp_dir/* - fi -} - -setup_network_ether() -{ - dialog $clear --title "Ethernet Interface Name" \ - --menu "Please select the type of ethernet interface you have:\n\n" \ - 20 76 6 \ - "ed0" "WD80x3, SMC, Novell NE[21]000 or 3C503 generic NIC at 0x280/5" \ - "ed1" "Same as above, but at address 0x300 and IRQ 5" \ - "de0" "DEC PCI ethernet adapter (or compatible)" \ - "ie0" "AT&T StarLan and EN100 family at 0x360 and IRQ 7" \ - "is0" "Isolan 4141-0 or Isolink 4110 at 0x280 and IRQ 7" \ - "ze0" "PCMCIA IBM or National card at 0x300 and IRQ 5" \ - 2> ${TMP}/menu.tmp.$$ - - retval=$? - interface=`cat ${TMP}/menu.tmp.$$` - rm -f ${TMP}/menu.tmp.$$ - if ! handle_rval $retval; then return 1; fi -} - -setup_network_slip() -{ - clear="" - default_value="" - if ! network_dialog "What is the IP number for the remote host?"; then return 1; fi - remote_hostip=$answer - interface=sl0 - - default_value=$serial_interface - if ! network_dialog "What is the name of the serial interface?"; then return 1; fi - serial_interface=$answer - - default_value=$serial_speed - if ! network_dialog "What speed is the serial interface?"; then return 1; fi - serial_speed=$answer - clear="--clear" - - if dialog $clear --title "Dial" --yesno "Do you need to dial the phone or otherwise talk to the modem?"; then - mkdir -p /var/log - touch -f /var/log/aculog > /dev/null 2>&1 - chmod 666 /var/log/aculog > /dev/null 2>&1 - confirm "You may now dialog with your modem and set up the slip connection.\nBe sure to disable DTR sensitivity (usually with AT&D0) or the modem may\nhang up when you exit 'cu'. Use ~. to exit cu and continue." - dialog --clear - cu -l $serial_interface -s $serial_speed - dialog --clear - fi -} - -setup_network_plip() -{ - default_value="" - if ! network_dialog "What is the IP number for the remote host?"; then return 1; fi - remote_hostip=$answer - interface=lp0 -} - -setup_network() -{ - done=0 - while [ "$interface" = "" ]; do - clear="--clear" - dialog $clear --title "Set up network interface" \ - --menu "Please select the type of network connection you have:\n\n" \ - 15 72 3 \ - "ether" "A supported ethernet card" \ - "SLIP" "A point-to-point SLIP (Serial Line IP) connection" \ - "PLIP" "A Parallel-Line IP setup (sort of like lap-link)" \ - 2> ${TMP}/menu.tmp.$$ - - retval=$? - choice=`cat ${TMP}/menu.tmp.$$` - rm -f ${TMP}/menu.tmp.$$ - if ! handle_rval $retval; then return 1; fi - case $choice in - ether) - if ! setup_network_ether; then continue; fi - ;; - - SLIP) - if ! setup_network_slip; then continue; fi - ;; - - PLIP) - if ! setup_network_plip; then continue; fi - ;; - esac - if [ "$interface" = "" ]; then continue; fi - - clear="" - default_value="" - if ! network_dialog "What is the fully qualified name of this host?"; then clear="--clear"; return 1; fi - hostname=$answer - echo $hostname > /etc/myname - hostname $hostname - - default_value=`echo $hostname | sed -e 's/[^.]*\.//'` - if network_dialog "What is the domain name of this host (Internet, not YP/NIS)?"; then - domain=$answer - fi - - default_value="" - if ! network_dialog "What is the IP address of this host?"; then clear="--clear"; return 1; fi - ipaddr=$answer - - echo "$ipaddr $hostname `echo $hostname | sed -e 's/\.$domain//'`" >> /etc/hosts - - default_value="$netmask" - if network_dialog "Please specify the netmask"; then - if [ "$answer" != "" ]; then - netmask=$answer - fi - fi - - default_value="" - if network_dialog "Any extra flags to ifconfig?" ; then - ifconfig_flags=$answer - fi - echo "Progress <$IFCONFIG $interface $ipaddr $remote_hostip netmask $netmask $ifconfig_flags>" >/dev/ttyv1 - if ! $IFCONFIG $interface $ipaddr $remote_hostip netmask $netmask $ifconfig_flags > /dev/ttyv1 2>&1 ; then - error "Unable to configure interface $interface" - ipaddr=""; interface="" - continue - fi - if [ "$interface" = "sl0" ]; then - slattach -a -s $serial_speed $serial_interface - fi - echo "$ipaddr $remote_hostip netmask $netmask $ifconfig_flags" > /etc/hostname.$interface - default_value="" - if network_dialog "If you have a default gateway, enter its IP address"; then - if [ "$answer" != "" ]; then - gateway=$answer - echo "Progress <$ROUTE $ROUTE_FLAGS $gateway>" > /dev/ttyv1 2>&1 - $ROUTE $ROUTE_FLAGS $gateway > /dev/ttyv1 2>&1 - fi - fi - - default_value="" - if network_dialog "If you have a name server, enter its IP address"; then - if [ "$answer" != "" ]; then - nameserver=$answer - echo "domain $domain" > /etc/resolv.conf - echo "nameserver $nameserver" >> /etc/resolv.conf - fi - fi - done -} - -extract_dist() -{ - if [ -f extract.sh ]; then - message "Extracting distribution.. Please wait!" - sh ./extract.sh < /dev/ttyv1 > /dev/ttyv1 2>&1 - else - error "Improper distribution. No installation script found." - fi -} - -install_set() -{ - case $media_type in - tape) - if ! set_tmpdir; then return; fi - if ! cd_tmpdir; then return; fi - confirm "Please mount tape for ${media_device}." - if [ "$media_device" = "ftape" ]; then - dialog --title "Results of tape extract" $clear \ - --prgbox "ft | $TAR $TAR_FLAGS -" 10 72 - else - dialog --title "Results of tape extract" $clear \ - --prgbox "$TAR $TAR_FLAGS $media_device" 10 72 - fi - extract_dist - rm_tmpdir - ;; - - cdrom) - if ! mount_cd9660 $media_device /mnt > /dev/ttyv1 2>&1; then - error "Unable to mount $media_device on /mnt" - else - title="CDROM Information" - default_value="$cdrom_path" - if ! input "Directory on CD containing distribution"; then return; fi - cdrom_path=$answer - cd /mnt/$cdrom_path - extract_dist - fi - return - ;; - - dos) - if ! set_tmpdir; then return; fi - if ! cd_tmpdir; then return; fi - not_supported - return - ;; - ftp) - if ! set_tmpdir; then return; fi - if ! cd_tmpdir; then return; fi - if ! echo $media_device | grep -v 'ftp://'; then - message "Fetching distribution using ncftp. Use ALT-F2 to see output, ALT-F1 to return." - if ! ncftp $media_device/* < /dev/null > /dev/ttyv1 2>&1; then - error "Couldn't fetch distribution from ${media_device}!" - else - extract_dist - fi - else - dialog --clear - ftp $media_device - dialog --clear - extract_dist - fi - rm_tmpdir - return - ;; - - nfs) - message "Extracting from NFS directory" - cd /mnt - extract_dist - cd / - umount /mnt > /dev/tty1 2>&1 - return - ;; - - ufs) - message "Unpacking from prepared UFS directory" - cd $media_device - extract_dist - cd / - ;; - esac + --msgbox \ +"We're now ready to install one or more packed distribution +sets onto your machine. Installation may be done from tape, +CD, network (NFS or ftp over ethernet, SLIP or parallel port), +a DOS partition or DOS floppies. If you're installing over +the network, make sure your cables are plugged in and ready to +go. If you're installing from tape, CD or floppies, now would +be a good time to remember where you put the distribution +media! :-) If you're set up and ready to go, please press return!" 16 72 } do_last_config() @@ -574,16 +74,23 @@ The login name \"root\" has no password. If you're new to UN*X, log in as root when prompted for a user name and run vipw to add a new user for yourself. -Any install-related comments to jkh, phk or paul (@freebsd.org)." 18 72 +There are also many useful pre-compiled packages for ${DISTNAME} +available which you may wish to investigate. Look in: + + ftp://ftp.freebsd.org/pub/FreeBSD/${DISTNAME}/packages + +Any install-related comments to jkh@freebsd.org, phk@freebsd.org or +paul@freebsd.org." 22 72 } welcome set_defaults while [ $installing -eq 1 ]; do - if choose_media; then - install_set - media_device=""; media_type="" + if media_select_distribution; then + if media_chose; then + install_set + fi else do_last_config installing=0 diff --git a/release/instdist.sh b/release/instdist.sh new file mode 100644 index 000000000000..c4bbfe9759df --- /dev/null +++ b/release/instdist.sh @@ -0,0 +1,401 @@ +#!/stand/sh +# +# instdist - Install a distribution from some sort of media. +# +# Written: November 11th, 1994 +# Copyright (C) 1994 by Jordan K. Hubbard +# +# Permission to copy or use this software for any purpose is granted +# provided that this message stay intact, and at this location (e.g. no +# putting your name on top after doing something trivial like reindenting +# it, just to make it look like you wrote it!). +# +# $Id$ + +if [ "$_INSTINST_SH_LOADED_" = "yes" ]; then + return 0 +else + _INSTINST_SH_LOADED_=yes +fi + +# Grab the miscellaneous functions. +. miscfuncs.sh + +# Set some reasonable defaults. +TAR=tar +TAR_FLAGS="--unlink -xvf" +MNT=/mnt + +# Set the initial state for media installation. +media_set_defaults() { + media_type="" + media_device="" + media_distribution="" + clear="--clear" + ipaddr="" + hostname="" + ether_intr="" + domain="" + netmask="0xffffff00" + ifconfig_flags="" + remote_hostip="" + tmp_dir="/usr/tmp" + ftp_path="ftp://ftp.freebsd.org/pub/FreeBSD/2.0-ALPHA" + nfs_path="" + serial_interface="/dev/tty00" + serial_speed="38400" +} + +# Set the installation media to undefined. +media_reset() +{ + media_device="" + media_type="" + media_distribution="" +} + +# Set the location of our temporary unpacking directory. +media_set_tmpdir() +{ + title="Chose temporary directory" + default_value="/usr/tmp" + if ! input \ +"Please specify the name of a directory containing enough free +space to hold the temporary files for this distribution. At +minimum, a binary distribution will require around 21MB of +temporary space. At maximum, a srcdist may take 30MB or more. +If the directory you specify does not exist, it will be created +for you. If you do not have enough free space to hold both the +packed and unpacked distribution files, consider using the NFS +or CDROM installation methods as they require no temporary +storage.\n\n"; then return 1; fi + tmp_dir=$answer + mkdir -p $tmp_dir + return 0 +} + +media_cd_tmpdir() +{ + if ! cd $tmp_dir; then + error "No such file or directory for ${tmp_dir}, sorry! Please fix this and try again." + return 1 + fi +} + +media_rm_tmpdir() +{ + cd / + if dialog --title "Delete contents?" $clear \ + --yesno "Do you wish to delete the contents of ${tmp_dir}?" 5 72; then + rm -rf $tmp_dir/* + fi +} + +media_extract_dist() +{ + if [ -f extract.sh ]; then + message "Extracting distribution.. Please wait!" + sh ./extract.sh < /dev/ttyv1 > /dev/ttyv1 2>&1 + else + error "Improper distribution. No installation script found!" + fi +} + +media_install_set() +{ + case $media_type in + cdrom|nfs|ufs|doshd) + message "Extracting ${media_distribution} using ${media_type}." + cd ${media_device}/${media_distribution} + media_extract_dist + cd / + return + ;; + + tape) + if ! media_set_tmpdir; then return; fi + if ! media_cd_tmpdir; then return; fi + confirm "Please mount tape for ${media_device}." + if [ "$media_device" = "ftape" ]; then + dialog --title "Results of tape extract" $clear \ + --prgbox "ft | $TAR $TAR_FLAGS -" 10 72 + else + dialog --title "Results of tape extract" $clear \ + --prgbox "$TAR $TAR_FLAGS $media_device" 10 72 + fi + media_extract_dist + media_rm_tmpdir + ;; + + dosfd) + if ! media_set_tmpdir; then return; fi + if ! media_cd_tmpdir; then return; fi + copying="yes" + while [ "$copying" = "yes" ]; do + if dialog --title "Insert distribution diskette" \ + $clear --yesno "Please enter the next diskette and press OK to continue or Cancel if finished" 5 72; then + if ! mount_msdos ${media_device} ${MNT}; then + error "Unable to mount floppy! Please correct." + else + ( tar -cf - -C ${MNT} . | tar -xvf - ) >/dev/ttyv1 2>&1 + umount ${MNT} + fi + else + copying="no" + fi + done + media_extract_dist + media_rm_tmpdir + return + ;; + + ftp) + if ! media_set_tmpdir; then return; fi + if ! media_cd_tmpdir; then return; fi + if ! echo $media_device | grep -v 'ftp://'; then + message "Fetching distribution using ncftp. Use ALT-F2 to see output, ALT-F1 to return." + if ! ncftp $media_device/${media_distribution}/* < /dev/null > /dev/ttyv1 2>&1; then + error "Couldn't fetch ${media_distribution} distribution from ${media_device}!" + else + media_extract_dist + fi + else + dialog --clear + ftp $media_device + dialog --clear + media_extract_dist + fi + media_rm_tmpdir + return + ;; + esac +} + +media_select_distribution() +{ + media_distribution="" + while [ "$media_distribution" = "" ]; do + + dialog $clear --title "Please specify a distribution to load" \ + --menu \ +"FreeBSD is separated into a number of distributions for ease \n\ +of installation. Depending on how much hard disk space you have \n\ +available, you may chose to load one or all of them. Optional \n\ +and mandatory distributions are so noted. Please also note that \n\ +the secrdist is NOT FOR EXPORT from the U.S.! Please don't \n\ +endanger U.S. ftp sites by getting it illegally. Thank you!\n\n" \ +"Please select one (we'll come back to this menu later):" 20 76 6 \ + "?diskfree" "Uh, first, how much disk space do I have free?" + "bindist" "The ${DISTNAME} base distribution (mandatory - 80MB)" \ + "srcdist" "The ${DISTNAME} source distribution (optional - 120MB)" \ + "secrdist" "The ${DISTNAME} DES distribution (optional - 5MB)" \ + "compat1xdist" "The FreeBSD 1.x binary compatability dist (optional - 2MB)"\ + "packages" "The ${DISTNAME} optional software distribution (user choice)" \ + 2> ${TMP}/menu.tmp.$$ + retval=$? + media_distribution=`cat ${TMP}/menu.tmp.$$` + rm -f ${TMP}/menu.tmp.$$ + if ! handle_rval $retval; then return 1; fi + if [ $media_distribution = "?diskfree" ]; then + if df -k > ${TMP}/df.out; then + dialog $clear \ + --title "How much free space do I have?" \ + --textbox ${TMP}/df.out 15 76 + else + error "Couldn't get disk usage information! :-(" + fi + media_distribution="" + fi + done +} + +media_get_possible_subdir() +{ + default_value="" + title="Distribution Subdirectory" + if input \ +"If the distributions are in a subdirectory of the mount point, +please enter it here (no leading slash - it should be relative +to the mount point).\n\n"; then + if [ "$answer" != "" ]; then + media_device=${media_device}/$answer + fi + fi +} + +# Get values into $media_type and $media_device. Call network initialization +# if necessary. +media_chose() { + while [ "$media_device" = "" ]; do + + dialog $clear --title "Installation From" \ +--menu "Before installing a distribution, you need to chose \n\ +and/or configure your method of installation. Please pick from \n\ +one of the following options. If none of the listed options works \n\ +for you then your best bet may be to simply hit ESC twice to get \n\ +a subshell and proceed manually on your own. If you are already \n\ +finished with installation, select cancel to go on.\n\n\ + Please choose one of the following:" 20 72 7 \ + "?Kern" "Please show me the kernel boot messages again!" \ + "Tape" "Load distribution from SCSI, QIC or floppy tape" \ + "CDROM" "Load distribution from SCSI or Mitsumi CDROM" \ + "DOS" "Load from DOS floppies or a DOS hard disk partition" \ + "FTP" "Load distribution using FTP" \ + "UFS" "Load the distribution from existing UFS partition" \ + "NFS" "Load the distribution over NFS" 2> ${TMP}/menu.tmp.$$ + retval=$? + choice=`cat ${TMP}/menu.tmp.$$` + rm -f ${TMP}/menu.tmp.$$ + if ! handle_rval $retval; then return 1; fi + + case $choice in + ?Kern) + if dmesg > ${TMP}/dmesg.out; then + dialog $clear \ + --title "What do I have in this machine again?" \ + --textbox ${TMP}/dmesg.out 22 76 + else + error "Couldn't get dmesg information! :-(" + fi + ;; + + Tape) + dialog $clear --title "Chose Tape Type" \ +--menu "Which type of tape drive do you have attached to your \n\ +system? FreeBSD supports the following types:\n\n\ + Choose one of the following:" 20 72 3 \ + "SCSI" "SCSI tape drive attached to supported SCSI controller" \ + "QIC" "QIC tape drive (Colorado Jumbo, etc)" \ + "floppy" "Floppy tape drive" \ + 2> ${TMP}/menu.tmp.$$ + retval=$? + choice=`cat ${TMP}/menu.tmp.$$` + rm -f ${TMP}/menu.tmp.$$ + if ! handle_rval $retval; then continue; fi + media_type=tape; + case $choice in + SCSI) + media_device=/dev/rst0 + ;; + QIC) + media_device=/dev/rwt0 + ;; + floppy) + media_device=ftape + ;; + esac + ;; + + CDROM) + dialog $clear --title "Chose CDROM Type" \ +--menu "Which type of CDROM drive do you have attached to your \n\ +system? FreeBSD supports the following types:\n\n\ + Choose one of the following:" 15 72 2 \ + "SCSI" "SCSI CDROM drive attached to supported SCSI controller" \ + "Mitsumi" "Mitsumi CDROM drive" \ + 2> ${TMP}/menu.tmp.$$ + retval=$? + choice=`cat ${TMP}/menu.tmp.$$` + rm -f ${TMP}/menu.tmp.$$ + if ! handle_rval $retval; then continue; fi + media_type=cdrom; + case $choice in + SCSI) + media_device=/dev/cd0a + ;; + Mitsumi) + media_device=/dev/mcd0a + ;; + esac + if ! mount_cd9660 $media_device ${MNT} > /dev/ttyv1 2>&1; then + error "Unable to mount $media_device on ${MNT}" + media_device="" + else + media_device=${MNT} + media_get_possible_subdir + fi + ;; + + DOS) + default_value="/dev/fd0" + if input \ +"Please specify the device pointing at your DOS partition or +floppy media. For a hard disk, this might be something like +/dev/wd0h or /dev/sd0h (as identified in the disklabel editor). +For the "A" floppy drive, it's /dev/fd0, for the "B" floppy +drive it's /dev/fd1\n\n"; then + media_device=$answer + if echo $media_device | grep -v 'fd://'; then + if ! mount_msdos $media_device ${MNT} > /dev/ttyv1 2>&1; then + error "Unable to mount $media_device" + media_device="" + else + message "$media_device mounted successfully" + media_type=doshd + media_device=${MNT} + media_get_possible_subdir + fi + else + media_type=dosfd + fi + fi + ;; + + FTP) + if ! setup_network; then continue; fi + title="FTP Installation Information" + default_value="$ftp_path" + if ! input \ +"Please specify the machine and directory location of the +distribution you wish to load. This should be either a \"URL style\" +specification (e.g. ftp://ftp.freeBSD.org/pub/FreeBSD/...) or simply +the name of a host to connect to. If only a host name is specified, +the installation assumes that you will properly connect and \"mget\" +the files yourself.\n\n"; then continue; fi + media_type=ftp + media_device=$answer + ftp_path=$media_device + ;; + + NFS) + if ! setup_network; then continue; fi + title="NFS Installation Information" + default_value="$nfs_path" + if ! input \ +"Please specify a machine and directory mount point for the +distribution you wish to load. This must be in machine:dir +format (e.g. zooey:/a/FreeBSD/${DISTNAME}). The remote +directory *must* be be exported to your machine (or globally) +for this to work!\n\n"; then continue; fi + media_type=nfs + nfs_path=$answer + if ! mount_nfs $nfs_path ${MNT} > /dev/ttyv1 2>&1; then + error "Unable to mount $nfs_path" + else + message "$nfs_path mounted successfully" + media_device=${MNT} + media_get_possible_subdir + fi + ;; + + UFS) + dialog $clear --title "User Intervention Requested" --msgbox " +Please mount the filesystem you wish to use somewhere convenient and +exit the shell when you're through. I'll ask you for the location +of the distribution when we come back." 12 72 + dialog --clear + /stand/sh + title="Please enter directory" + default_value="${MNT}/bindist" + if input "Ok, now give me the full pathname of the directory where you've got the distribution."; then + if [ ! -f $answer/extract.sh ]; then + error "That's not a valid distribution" + else + media_type=ufs + media_device=$answer + fi + fi + ;; + esac + done +} diff --git a/release/miscfuncs.sh b/release/miscfuncs.sh new file mode 100644 index 000000000000..f899850fa3ad --- /dev/null +++ b/release/miscfuncs.sh @@ -0,0 +1,86 @@ +#!/stand/sh +# +# miscfuncs - miscellaneous functions for the other distribution scripts. +# +# Written: November 15th, 1994 +# Copyright (C) 1994 by Jordan K. Hubbard +# +# Permission to copy or use this software for any purpose is granted +# provided that this message stay intact, and at this location (e.g. no +# putting your name on top after doing something trivial like reindenting +# it, just to make it look like you wrote it!). +# +# $Id$ + +if [ "$_MISCFUNCS_SH_LOADED_" = "yes" ]; then + return 0 +else + _MISCFUNCS_SH_LOADED_=yes +fi + +PATH=/usr/bin:/usr/sbin:/bin:/sbin:/stand +export PATH +DISTNAME=2.0-ALPHA + +interrupt() { + if dialog --clear --title "User Interrupt Requested" \ + --yesno "Do you wish to abort the installation?" 5 70; then + exit 0; + fi +} + +# Handle the return value from a dialog, doing some pre-processing +# so that each client doesn't have to. +handle_rval() { + case $1 in + 0) + return 0 + ;; + 255) + PS1="subshell# " /stand/sh + ;; + *) + return 1 + ;; + esac +} + +# A simple user-confirmation dialog. +confirm() { + dialog --title "User Confirmation" --msgbox "$*" 8 72 +} + +# A simple message box dialog. +message() { + dialog --title "Progress" --infobox "$*" 5 72 +} + +# A simple error dialog. +error() { + dialog --title "Error!" --msgbox "$*" 10 72 +} + +# Something isn't supported yet! :-( +not_supported() { + dialog --title "Sorry!" \ + --msgbox "This feature is not supported in the current version of the \ +installation tools. Barring some sort of fatal accident, we do \ +expect it to be in the release. Please press RETURN to go on." 10 60 +} + +# Get a string from the user +input() +{ + dialog --title "$title" $clear \ + --inputbox "$*" 17 72 "$default_value" 2> ${TMP}/inputbox.tmp.$$ + if ! handle_rval $?; then rm -f ${TMP}/inputbox.tmp.$$; return 1; fi + answer=`cat ${TMP}/inputbox.tmp.$$` + rm -f ${TMP}/inputbox.tmp.$$ +} + +# Ask a networking question +network_dialog() +{ + title="Network Configuration" + if ! input "$*"; then return 1; fi +} diff --git a/release/netinst.sh b/release/netinst.sh new file mode 100644 index 000000000000..417293a1c81c --- /dev/null +++ b/release/netinst.sh @@ -0,0 +1,174 @@ +#!/stand/sh +# +# netinst - configure the user's network. +# +# Written: November 11th, 1994 +# Copyright (C) 1994 by Jordan K. Hubbard +# +# Permission to copy or use this software for any purpose is granted +# provided that this message stay intact, and at this location (e.g. no +# putting your name on top after doing something trivial like reindenting +# it, just to make it look like you wrote it!). +# +# $Id: bininst,v 1.38 1994/11/15 13:40:00 jkh Exp $ + +if [ "$_NETINST_SH_LOADED_" = "yes" ]; then + return 0 +else + _NETINST_SH_LOADED_=yes +fi + +# Set some useful variables. +IFCONFIG=ifconfig +ROUTE=route +ROUTE_FLAGS="add default" + +# Grab the miscellaneous functions. +. miscfuncs.sh + +network_setup_ether() +{ + dialog $clear --title "Ethernet Interface Name" \ + --menu "Please select the type of ethernet interface you have:\n\n" \ + 20 76 7 \ + "ed0" "WD80x3, SMC, Novell NE[21]000 or 3C503 generic NIC at 0x280" \ + "ed1" "Same as above, but at address 0x300 and IRQ 5" \ + "ep0" "3COM 3C509 at address 0x300 and IRQ 10" \ + "de0" "DEC PCI ethernet adapter (or compatible)" \ + "ie0" "AT&T StarLan and EN100 family at 0x360 and IRQ 7" \ + "is0" "Isolan 4141-0 or Isolink 4110 at 0x280 and IRQ 7" \ + "ze0" "PCMCIA IBM or National card at 0x300 and IRQ 5" \ + 2> ${TMP}/menu.tmp.$$ + + retval=$? + interface=`cat ${TMP}/menu.tmp.$$` + rm -f ${TMP}/menu.tmp.$$ + if ! handle_rval $retval; then return 1; fi +} + +network_setup_slip() +{ + clear="" + default_value="" + if ! network_dialog "What is the IP number for the remote host?"; then return 1; fi + remote_hostip=$answer + interface=sl0 + + default_value=$serial_interface + if ! network_dialog "What is the name of the serial interface?"; then return 1; fi + serial_interface=$answer + + default_value=$serial_speed + if ! network_dialog "What speed is the serial interface?"; then return 1; fi + serial_speed=$answer + clear="--clear" + + if dialog $clear --title "Dial" --yesno "Do you need to dial the phone or otherwise talk to the modem?"; then + mkdir -p /var/log + touch -f /var/log/aculog > /dev/null 2>&1 + chmod 666 /var/log/aculog > /dev/null 2>&1 + confirm "You may now dialog with your modem and set up the slip connection.\nBe sure to disable DTR sensitivity (usually with AT&D0) or the modem may\nhang up when you exit 'cu'. Use ~. to exit cu and continue." + dialog --clear + cu -l $serial_interface -s $serial_speed + dialog --clear + fi +} + +network_setup_plip() +{ + default_value="" + if ! network_dialog "What is the IP number for the remote host?"; then return 1; fi + remote_hostip=$answer + interface=lp0 +} + +network_setup() +{ + done=0 + while [ "$interface" = "" ]; do + clear="--clear" + dialog $clear --title "Set up network interface" \ + --menu "Please select the type of network connection you have:\n\n" \ + 15 72 3 \ + "ether" "A supported ethernet card" \ + "SLIP" "A point-to-point SLIP (Serial Line IP) connection" \ + "PLIP" "A Parallel-Line IP setup (sort of like lap-link)" \ + 2> ${TMP}/menu.tmp.$$ + + retval=$? + choice=`cat ${TMP}/menu.tmp.$$` + rm -f ${TMP}/menu.tmp.$$ + if ! handle_rval $retval; then return 1; fi + case $choice in + ether) + if ! network_setup_ether; then continue; fi + ;; + + SLIP) + if ! network_setup_slip; then continue; fi + ;; + + PLIP) + if ! network_setup_plip; then continue; fi + ;; + esac + if [ "$interface" = "" ]; then continue; fi + + clear="" + default_value="" + if ! network_dialog "What is the fully qualified name of this host?"; then clear="--clear"; return 1; fi + hostname=$answer + echo $hostname > /etc/myname + hostname $hostname + + default_value=`echo $hostname | sed -e 's/[^.]*\.//'` + if network_dialog "What is the domain name of this host (Internet, not YP/NIS)?"; then + domain=$answer + fi + + default_value="" + if ! network_dialog "What is the IP address of this host?"; then clear="--clear"; return 1; fi + ipaddr=$answer + + echo "$ipaddr $hostname `echo $hostname | sed -e 's/\.$domain//'`" >> /etc/hosts + + default_value="$netmask" + if network_dialog "Please specify the netmask"; then + if [ "$answer" != "" ]; then + netmask=$answer + fi + fi + + default_value="" + if network_dialog "Any extra flags to ifconfig?" ; then + ifconfig_flags=$answer + fi + echo "Progress <$IFCONFIG $interface $ipaddr $remote_hostip netmask $netmask $ifconfig_flags>" >/dev/ttyv1 + if ! $IFCONFIG $interface $ipaddr $remote_hostip netmask $netmask $ifconfig_flags > /dev/ttyv1 2>&1 ; then + error "Unable to configure interface $interface" + ipaddr=""; interface="" + continue + fi + if [ "$interface" = "sl0" ]; then + slattach -a -s $serial_speed $serial_interface + fi + echo "$ipaddr $remote_hostip netmask $netmask $ifconfig_flags" > /etc/hostname.$interface + default_value="" + if network_dialog "If you have a default gateway, enter its IP address"; then + if [ "$answer" != "" ]; then + gateway=$answer + echo "Progress <$ROUTE $ROUTE_FLAGS $gateway>" > /dev/ttyv1 2>&1 + $ROUTE $ROUTE_FLAGS $gateway > /dev/ttyv1 2>&1 + fi + fi + + default_value="" + if network_dialog "If you have a name server, enter its IP address"; then + if [ "$answer" != "" ]; then + nameserver=$answer + echo "domain $domain" > /etc/resolv.conf + echo "nameserver $nameserver" >> /etc/resolv.conf + fi + fi + done +} -- cgit v1.2.3