1 files changed, 491 insertions, 0 deletions
diff --git a/usr.bin/sed/tests/multi_test.sh b/usr.bin/sed/tests/multi_test.sh
new file mode 100644
index 000000000000..1aef0524092a
--- /dev/null
+++ b/usr.bin/sed/tests/multi_test.sh
@@ -0,0 +1,491 @@
+#!/bin/sh -
+#
+# Copyright (c) 1992 Diomidis Spinellis.
+# Copyright (c) 1992, 1993
+#	The Regents of the University of California.  All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+# 3. Neither the name of the University nor the names of its contributors
+#    may be used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+# SUCH DAMAGE.
+
+# sed Regression Tests
+#
+# The directory regress.test.out contains the expected test results
+#
+# These are the regression tests mostly created during the development
+# of the BSD sed.  Each test should have a unique mark name, which is
+# used for naming the corresponding file in regress.multitest.out.
+
+SRCDIR=$(dirname $0)
+
+main()
+{
+	REGRESS=${SRCDIR}/regress.multitest.out
+	DICT=/usr/share/dict/words
+
+	awk 'END { for (i = 1; i < 15; i++) print "l1_" i}' </dev/null >lines1
+	awk 'END { for (i = 1; i < 10; i++) print "l2_" i}' </dev/null >lines2
+
+	echo "1..130"
+
+	exec 4>&1 5>&2
+	tests
+	exec 1>&4 2>&5
+
+	# Remove temporary files
+	rm -f current.out lines[1-4] script[1-2]
+}
+
+tests()
+{
+	SED=sed
+	MARK=0
+
+	test_args
+	test_addr
+	test_group
+	test_acid
+	test_branch
+	test_pattern
+	test_print
+	test_subst
+	test_error
+	# Handle the result of the last test
+	result
+}
+
+# Display a test's result
+result()
+{
+	if [ "$TODO" = '1' ] ; then
+		TODO='TODO '
+	else
+		TODO=''
+	fi
+	if ! [ -r $REGRESS/${TESTNAME} ] ; then
+		echo "Seeding $REGRESS/${TESTNAME} with current result" 1>&2
+		cp current.out $REGRESS/${TESTNAME}
+	fi
+	if diff -c $REGRESS/${TESTNAME} current.out ; then
+		echo "ok $MARK $TESTNAME # $TODO$OCOMMENT"
+	else
+		echo "not ok $MARK $TESTNAME # $TODO$OCOMMENT"
+	fi 1>&4 2>&5
+}
+
+# Mark the beginning of each test
+mark()
+{
+	[ $MARK -gt 0 ] && result
+	OCOMMENT=$COMMENT
+	MARK=`expr $MARK + 1`
+	TESTNAME=$1
+	exec 1>&4 2>&5
+	exec >"current.out"
+}
+
+test_args()
+{
+	COMMENT='Argument parsing - first type'
+	mark '1.1'
+	$SED 's/^/e1_/p' lines1
+	mark '1.2' ; $SED -n 's/^/e1_/p' lines1
+	mark '1.3'
+	$SED 's/^/e1_/p' <lines1
+	mark '1.4' ; $SED -n 's/^/e1_/p' <lines1
+	COMMENT='Argument parsing - second type'
+	mark '1.4.1'
+	$SED -e '' <lines1
+	echo 's/^/s1_/p' >script1
+	echo 's/^/s2_/p' >script2
+	mark '1.5'
+	$SED -f script1 lines1
+	mark '1.6'
+	$SED -f script1 <lines1
+	mark '1.7'
+	$SED -e 's/^/e1_/p' lines1
+	mark '1.8'
+	$SED -e 's/^/e1_/p' <lines1
+	mark '1.9' ; $SED -n -f script1 lines1
+	mark '1.10' ; $SED -n -f script1 <lines1
+	mark '1.11' ; $SED -n -e 's/^/e1_/p' lines1
+	mark '1.12'
+	$SED -n -e 's/^/e1_/p' <lines1
+	mark '1.13'
+	$SED -e 's/^/e1_/p' -e 's/^/e2_/p' lines1
+	mark '1.14'
+	$SED -f script1 -f script2 lines1
+	mark '1.15'
+	$SED -e 's/^/e1_/p' -f script1 lines1
+	mark '1.16'
+	$SED -e 's/^/e1_/p' lines1 lines1
+	# POSIX D11.2:11251
+	mark '1.17' ; $SED p <lines1 lines1
+cat >script1 <<EOF
+#n
+# A comment
+
+p
+EOF
+	mark '1.18' ; $SED -f script1 <lines1 lines1
+}
+
+test_addr()
+{
+	COMMENT='Address ranges'
+	mark '2.1' ; $SED -n -e '4p' lines1
+	mark '2.2' ; $SED -n -e '20p' lines1 lines2
+	mark '2.3' ; $SED -n -e '$p' lines1
+	mark '2.4' ; $SED -n -e '$p' lines1 lines2
+	mark '2.5' ; $SED -n -e '$a\
+hello' /dev/null
+	mark '2.6' ; $SED -n -e '$p' lines1 /dev/null lines2
+	# Should not print anything
+	mark '2.7' ; $SED -n -e '20p' lines1
+	mark '2.8' ; $SED -n -e '/NOTFOUND/p' lines1
+	mark '2.9' ; $SED -n '/l1_7/p' lines1
+	mark '2.10' ; $SED -n ' /l1_7/ p' lines1
+	mark '2.11' ; $SED -n '\_l1\_7_p' lines1
+	mark '2.12' ; $SED -n '1,4p' lines1
+	mark '2.13' ; $SED -n '1,$p' lines1 lines2
+	mark '2.14' ; $SED -n '1,/l2_9/p' lines1 lines2
+	mark '2.15' ; $SED -n '/4/,$p' lines1 lines2
+	mark '2.16' ; $SED -n '/4/,20p' lines1 lines2
+	mark '2.17' ; $SED -n '/4/,/10/p' lines1 lines2
+	mark '2.18' ; $SED -n '/l2_3/,/l1_8/p' lines1 lines2
+	mark '2.19' ; $SED -n '12,3p' lines1 lines2
+	mark '2.20' ; $SED -n '/l1_7/,3p' lines1 lines2
+	mark '2.21' ; $SED -n '13,+4p' lines1 lines2
+	mark '2.22' ; $SED -n '/l1_6/,+2p' lines1 lines2
+	# For PR bin/192108
+	mark '2.23'; $SED -n '12,+1p' lines1
+}
+
+test_group()
+{
+	COMMENT='Brace and other grouping'
+	mark '3.1' ; $SED -e '
+4,12 {
+	s/^/^/
+	s/$/$/
+	s/_/T/
+}' lines1
+	mark '3.2' ; $SED -e '
+4,12 {
+	s/^/^/
+	/6/,/10/ {
+		s/$/$/
+		/8/ s/_/T/
+	}
+}' lines1
+	mark '3.3' ; $SED -e '
+4,12 !{
+	s/^/^/
+	/6/,/10/ !{
+		s/$/$/
+		/8/ !s/_/T/
+	}
+}' lines1
+	mark '3.4' ; $SED -e '4,12!s/^/^/' lines1
+}
+
+test_acid()
+{
+	COMMENT='Commands a c d and i'
+	mark '4.1' ; $SED -n -e '
+s/^/before_i/p
+20i\
+inserted
+s/^/after_i/p
+' lines1 lines2
+	mark '4.2' ; $SED -n -e '
+5,12s/^/5-12/
+s/^/before_a/p
+/5-12/a\
+appended
+s/^/after_a/p
+' lines1 lines2
+	mark '4.3'
+	$SED -n -e '
+s/^/^/p
+/l1_/a\
+appended
+8,10N
+s/$/$/p
+' lines1 lines2
+	mark '4.4' ; $SED -n -e '
+c\
+hello
+' lines1
+	mark '4.5' ; $SED -n -e '
+8c\
+hello
+' lines1
+	mark '4.6' ; $SED -n -e '
+3,14c\
+hello
+' lines1
+# SunOS and GNU sed behave differently.   We follow POSIX
+	mark '4.7' ; $SED -n -e '
+8,3c\
+hello
+' lines1
+	mark '4.8' ; $SED d <lines1
+}
+
+test_branch()
+{
+	COMMENT='Labels and branching'
+	mark '5.1' ; $SED -n -e '
+b label4
+:label3
+s/^/label3_/p
+b end
+:label4
+2,12b label1
+b label2
+:label1
+s/^/label1_/p
+b
+:label2
+s/^/label2_/p
+b label3
+:end
+' lines1
+	mark '5.2'
+	$SED -n -e '
+s/l1_/l2_/
+t ok
+b
+:ok
+s/^/tested /p
+' lines1 lines2
+# SunOS and GNU sed behave as follows: lines 9-$ aren't printed at all
+	mark '5.3' ; $SED -n -e '
+5,8b inside
+1,5 {
+	s/^/^/p
+	:inside
+	s/$/$/p
+}
+' lines1
+# Check that t clears the substitution done flag
+	mark '5.4' ; $SED -n -e '
+1,8s/^/^/
+t l1
+:l1
+t l2
+s/$/$/p
+b
+:l2
+s/^/ERROR/
+' lines1
+# Check that reading a line clears the substitution done flag
+	mark '5.5'
+	$SED -n -e '
+t l2
+1,8s/^/^/p
+2,7N
+b
+:l2
+s/^/ERROR/p
+' lines1
+	mark '5.6' ; $SED 5q lines1
+	mark '5.7' ; $SED -e '
+5i\
+hello
+5q' lines1
+# Branch across block boundary
+	mark '5.8' ; $SED -e '
+{
+:b
+}
+s/l/m/
+tb' lines1
+}
+
+test_pattern()
+{
+COMMENT='Pattern space commands'
+# Check that the pattern space is deleted
+	mark '6.1' ; $SED -n -e '
+c\
+changed
+p
+' lines1
+	mark '6.2' ; $SED -n -e '
+4d
+p
+' lines1
+	mark '6.3'
+	$SED -e 'N;N;N;D' lines1
+	mark '6.4' ; $SED -e '
+2h
+3H
+4g
+5G
+6x
+6p
+6x
+6p
+' lines1
+	mark '6.5' ; $SED -e '4n' lines1
+	mark '6.6' ; $SED -n -e '4n' lines1
+}
+
+test_print()
+{
+	COMMENT='Print and file routines'
+	awk 'END {for (i = 1; i < 256; i++) printf("%c", i);print "\n"}' \
+		</dev/null >lines3
+	# GNU and SunOS sed behave differently here
+	mark '7.1'
+	$SED -n l lines3
+	mark '7.2' ; $SED -e '/l2_/=' lines1 lines2
+	rm -f lines4
+	mark '7.3' ; $SED -e '3,12w lines4' lines1
+	COMMENT='w results'
+	cat lines4
+	mark '7.4' ; $SED -e '4r lines2' lines1
+	mark '7.5' ; $SED -e '5r /dev/dds' lines1
+	mark '7.6' ; $SED -e '6r /dev/null' lines1
+	mark '7.7'
+	sed '200q' $DICT | sed 's$.*$s/^/&/w tmpdir/&$' >script1
+	rm -rf tmpdir
+	mkdir tmpdir
+	$SED -f script1 lines1
+	cat tmpdir/*
+	rm -rf tmpdir
+	mark '7.8'
+	echo line1 > lines3
+	echo "" >> lines3
+	$SED -n -e '$p' lines3 /dev/null
+		
+}
+
+test_subst()
+{
+	COMMENT='Substitution commands'
+	mark '8.1' ; $SED -e 's/./X/g' lines1
+	mark '8.2' ; $SED -e 's,.,X,g' lines1
+# SunOS sed thinks we are escaping . as wildcard, not as separator
+	mark '8.3'
+	$SED -e 's.\..X.g' lines1
+	mark '8.4' ; $SED -e 's/[\/]/Q/' lines1
+	mark '8.5' ; $SED -e 's_\__X_' lines1
+	mark '8.6' ; $SED -e 's/./(&)/g' lines1
+	mark '8.7' ; $SED -e 's/./(\&)/g' lines1
+	mark '8.8' ; $SED -e 's/\(.\)\(.\)\(.\)/x\3x\2x\1/g' lines1
+	mark '8.9' ; $SED -e 's/_/u0\
+u1\
+u2/g' lines1
+	mark '8.10'
+	$SED -e 's/./X/4' lines1
+	rm -f lines4
+	mark '8.11' ; $SED -e 's/1/X/w lines4' lines1
+	COMMENT='s wfile results'
+	cat lines4
+	mark '8.12' ; $SED -e 's/[123]/X/g' lines1
+	mark '8.13' ; $SED -e 'y/0123456789/9876543210/' lines1
+	mark '8.14' ; 
+	$SED -e 'y10\123456789198765432\101' lines1
+	mark '8.15' ; $SED -e '1N;2y/\n/X/' lines1
+	mark '8.16'
+	echo 'eeefff' | $SED -e '
+		p
+		s/e/X/p
+		:x
+		s//Y/p 
+		# Establish limit counter in the hold space
+		# GNU sed version 3.02 enters into an infinite loop here
+		x 
+		/.\{10\}/ {
+			s/.*/ERROR/
+			b
+		}
+		s/.*/&./
+		x 
+		/f/bx
+	'
+	# POSIX does not say that this should work,
+	# but it does for GNU, BSD, and SunOS
+	mark '8.17' ; $SED -e 's/[/]/Q/' lines1
+
+	COMMENT='[ as an s delimiter and its escapes'
+	mark '8.18' ; $SED -e 's[_[X[' lines1
+	# This is a matter of interpretation
+	# POSIX 1003.1, 2004 says "Within the BRE and the replacement,
+	# the BRE delimiter itself can be used as a *literal* character
+	# if it is preceded by a backslash"
+	# SunOS 5.1 /usr/bin/sed and Mac OS X follow the literal POSIX
+	# interpretation.
+	# GNU sed version 4.1.5 treats \[ as the beginning of a character
+	# set specification (both with --posix and without).
+	mark '8.19' ; sed 's/l/[/' lines1 | $SED -e 's[\[.[X['
+	mark '8.20' ; sed 's/l/[/' lines1 | $SED -e 's[\[.[X\[['
+	COMMENT='\ in y command'
+	mark '8.21'
+	echo 'a\b(c' |
+	$SED 'y%ABCDEFGHIJKLMNOPQRSTUVWXYZ, /\\()"%abcdefghijklmnopqrstuvwxyz,------%'
+	COMMENT='\n in a character class and a BRE'
+	mark '8.22' ; (echo 1; echo 2) | $SED -n '1{;N;s/[\n]/X/;p;}'
+	mark '8.23' ; (echo 1; echo 2) | $SED -n '1{;N;s/\n/X/;p;}'
+}
+
+test_error()
+{
+	COMMENT='Error cases'
+	mark '9.1' ; $SED -x 2>/dev/null ; echo $?
+	mark '9.2' ; $SED -f 2>/dev/null ; echo $?
+	mark '9.3' ; $SED -e 2>/dev/null ; echo $?
+	mark '9.4' ; $SED -f /dev/xyzzyxyzy 2>/dev/null ; echo $?
+	mark '9.5' ; $SED p /dev/xyzzyxyzy 2>/dev/null ; echo $?
+	mark '9.6' ; $SED -f /bin/sh 2>/dev/null ; echo $?
+	mark '9.7' ; $SED '{' 2>/dev/null ; echo $?
+	mark '9.8' ; $SED '{' 2>/dev/null ; echo $?
+	mark '9.9' ; $SED '/hello/' 2>/dev/null ; echo $?
+	mark '9.10' ; $SED '1,/hello/' 2>/dev/null ; echo $?
+	mark '9.11' ; $SED -e '-5p' 2>/dev/null ; echo $?
+	mark '9.12' ; $SED '/jj' 2>/dev/null ; echo $?
+	mark '9.13' ; $SED 'a hello' 2>/dev/null ; echo $?
+	mark '9.14' ; $SED 'a \ hello' 2>/dev/null ; echo $?
+	mark '9.15' ; $SED 'b foo' 2>/dev/null ; echo $?
+	mark '9.16' ; $SED 'd hello' 2>/dev/null ; echo $?
+	mark '9.17' ; $SED 's/aa' 2>/dev/null ; echo $?
+	mark '9.18' ; $SED 's/aa/' 2>/dev/null ; echo $?
+	mark '9.19' ; $SED 's/a/b' 2>/dev/null ; echo $?
+	mark '9.20' ; $SED 's/a/b/c/d' 2>/dev/null ; echo $?
+	mark '9.21' ; $SED 's/a/b/ 1 2' 2>/dev/null ; echo $?
+	mark '9.22' ; $SED 's/a/b/ 1 g' 2>/dev/null ; echo $?
+	mark '9.23' ; $SED 's/a/b/w' 2>/dev/null ; echo $?
+	mark '9.24' ; $SED 'y/aa' 2>/dev/null ; echo $?
+	mark '9.25' ; $SED 'y/aa/b/' 2>/dev/null ; echo $?
+	mark '9.26' ; $SED 'y/aa/' 2>/dev/null ; echo $?
+	mark '9.27' ; $SED 'y/a/b' 2>/dev/null ; echo $?
+	mark '9.28' ; $SED 'y/a/b/c/d' 2>/dev/null ; echo $?
+	mark '9.29' ; $SED '!' 2>/dev/null ; echo $?
+	mark '9.30' ; $SED supercalifrangolisticexprialidociussupercalifrangolisticexcius 2>/dev/null ; echo $?
+	mark '9.31' ; $SED '' /dev/null 2>/dev/null ; echo $?
+}
+
+main