aboutsummaryrefslogtreecommitdiff
path: root/sys
diff options
context:
space:
mode:
Diffstat (limited to 'sys')
-rw-r--r--sys/dev/hyperv/storvsc/hv_storvsc_drv_freebsd.c158
-rw-r--r--sys/dev/hyperv/storvsc/hv_vstorage.h34
2 files changed, 168 insertions, 24 deletions
diff --git a/sys/dev/hyperv/storvsc/hv_storvsc_drv_freebsd.c b/sys/dev/hyperv/storvsc/hv_storvsc_drv_freebsd.c
index cab86500ace1..968de9d14e7b 100644
--- a/sys/dev/hyperv/storvsc/hv_storvsc_drv_freebsd.c
+++ b/sys/dev/hyperv/storvsc/hv_storvsc_drv_freebsd.c
@@ -151,6 +151,12 @@ SYSCTL_UINT(_hw_storvsc, OID_AUTO, max_io, CTLFLAG_RDTUN,
static int hv_storvsc_chan_cnt = 0;
SYSCTL_INT(_hw_storvsc, OID_AUTO, chan_cnt, CTLFLAG_RDTUN,
&hv_storvsc_chan_cnt, 0, "# of channels to use");
+#ifdef DIAGNOSTIC
+static int hv_storvsc_srb_status = -1;
+SYSCTL_INT(_hw_storvsc, OID_AUTO, srb_status, CTLFLAG_RW,
+ &hv_storvsc_srb_status, 0, "srb_status to inject");
+TUNABLE_INT("hw_storvsc.srb_status", &hv_storvsc_srb_status);
+#endif /* DIAGNOSTIC */
#define STORVSC_MAX_IO \
vmbus_chan_prplist_nelem(hv_storvsc_ringbuffer_size, \
@@ -704,7 +710,16 @@ hv_storvsc_io_request(struct storvsc_softc *sc,
vstor_packet->operation = VSTOR_OPERATION_EXECUTESRB;
ch_sel = (vstor_packet->u.vm_srb.lun + curcpu) % sc->hs_nchan;
- outgoing_channel = sc->hs_sel_chan[ch_sel];
+ /*
+ * If we are panic'ing, then we are dumping core. Since storvsc_polls
+ * always uses sc->hs_chan, then we must send to that channel or a poll
+ * timeout will occur.
+ */
+ if (panicstr) {
+ outgoing_channel = sc->hs_chan;
+ } else {
+ outgoing_channel = sc->hs_sel_chan[ch_sel];
+ }
mtx_unlock(&request->softc->hs_lock);
if (request->prp_list.gpa_range.gpa_len) {
@@ -2155,26 +2170,133 @@ storvsc_io_done(struct hv_storvsc_request *reqp)
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
int srb_status = SRB_STATUS(vm_srb->srb_status);
+#ifdef DIAGNOSTIC
+ if (hv_storvsc_srb_status != -1) {
+ srb_status = SRB_STATUS(hv_storvsc_srb_status & 0x3f);
+ hv_storvsc_srb_status = -1;
+ }
+#endif /* DIAGNOSTIC */
if (vm_srb->scsi_status == SCSI_STATUS_OK) {
if (srb_status != SRB_STATUS_SUCCESS) {
- /*
- * If there are errors, for example, invalid LUN,
- * host will inform VM through SRB status.
- */
- if (bootverbose) {
- if (srb_status == SRB_STATUS_INVALID_LUN) {
- xpt_print(ccb->ccb_h.path,
- "invalid LUN %d for op: %s\n",
- vm_srb->lun,
- scsi_op_desc(cmd->opcode, NULL));
- } else {
- xpt_print(ccb->ccb_h.path,
- "Unknown SRB flag: %d for op: %s\n",
- srb_status,
- scsi_op_desc(cmd->opcode, NULL));
- }
+ bool log_error = true;
+ switch (srb_status) {
+ case SRB_STATUS_PENDING:
+ /* We should never get this */
+ panic("storvsc_io_done: SRB_STATUS_PENDING");
+ break;
+ case SRB_STATUS_ABORTED:
+ /*
+ * storvsc doesn't support aborts yet
+ * but if we ever get this status
+ * the I/O is complete - treat it as a
+ * timeout
+ */
+ ccb->ccb_h.status |= CAM_CMD_TIMEOUT;
+ break;
+ case SRB_STATUS_ABORT_FAILED:
+ /* We should never get this */
+ panic("storvsc_io_done: SRB_STATUS_ABORT_FAILED");
+ break;
+ case SRB_STATUS_ERROR:
+ /*
+ * We should never get this.
+ * Treat it as a CAM_UNREC_HBA_ERROR.
+ * It will be retried
+ */
+ ccb->ccb_h.status |= CAM_UNREC_HBA_ERROR;
+ break;
+ case SRB_STATUS_BUSY:
+ /* Host is busy. Delay and retry */
+ ccb->ccb_h.status |= CAM_BUSY;
+ break;
+ case SRB_STATUS_INVALID_REQUEST:
+ case SRB_STATUS_INVALID_PATH_ID:
+ case SRB_STATUS_NO_DEVICE:
+ case SRB_STATUS_INVALID_TARGET_ID:
+ /*
+ * These indicate an invalid address
+ * and really should never be seen.
+ * A CAM_PATH_INVALID could be
+ * used here but I want to run
+ * down retries. Do a CAM_BUSY
+ * since the host might be having issues.
+ */
+ ccb->ccb_h.status |= CAM_BUSY;
+ break;
+ case SRB_STATUS_TIMEOUT:
+ case SRB_STATUS_COMMAND_TIMEOUT:
+ /* The backend has timed this out */
+ ccb->ccb_h.status |= CAM_BUSY;
+ break;
+ /* Some old pSCSI errors below */
+ case SRB_STATUS_SELECTION_TIMEOUT:
+ case SRB_STATUS_MESSAGE_REJECTED:
+ case SRB_STATUS_PARITY_ERROR:
+ case SRB_STATUS_NO_HBA:
+ case SRB_STATUS_DATA_OVERRUN:
+ case SRB_STATUS_UNEXPECTED_BUS_FREE:
+ case SRB_STATUS_PHASE_SEQUENCE_FAILURE:
+ /*
+ * Old pSCSI responses, should never get.
+ * If we do treat as a CAM_UNREC_HBA_ERROR
+ * which will be retried
+ */
+ ccb->ccb_h.status |= CAM_UNREC_HBA_ERROR;
+ break;
+ case SRB_STATUS_BUS_RESET:
+ ccb->ccb_h.status |= CAM_SCSI_BUS_RESET;
+ break;
+ case SRB_STATUS_BAD_SRB_BLOCK_LENGTH:
+ /*
+ * The request block is malformed and
+ * I doubt it is from the guest. Just retry.
+ */
+ ccb->ccb_h.status |= CAM_UNREC_HBA_ERROR;
+ break;
+ /* Not used statuses just retry */
+ case SRB_STATUS_REQUEST_FLUSHED:
+ case SRB_STATUS_BAD_FUNCTION:
+ case SRB_STATUS_NOT_POWERED:
+ ccb->ccb_h.status |= CAM_UNREC_HBA_ERROR;
+ break;
+ case SRB_STATUS_INVALID_LUN:
+ /*
+ * Don't log an EMS for this response since
+ * there is no device at this LUN. This is a
+ * normal and expected response when a device
+ * is detached.
+ */
+ ccb->ccb_h.status |= CAM_DEV_NOT_THERE;
+ log_error = false;
+ break;
+ case SRB_STATUS_ERROR_RECOVERY:
+ case SRB_STATUS_LINK_DOWN:
+ /*
+ * I don't ever expect these from
+ * the host but if we ever get
+ * retry after a delay
+ */
+ ccb->ccb_h.status |= CAM_BUSY;
+ break;
+ default:
+ /*
+ * An undefined response assert on
+ * on debug builds else retry
+ */
+ ccb->ccb_h.status |= CAM_UNREC_HBA_ERROR;
+ KASSERT(srb_status <= SRB_STATUS_LINK_DOWN,
+ ("storvsc: %s, unexpected srb_status of 0x%x",
+ __func__, srb_status));
+ break;
+ }
+ if (log_error) {
+ xpt_print(ccb->ccb_h.path, "The hypervisor's I/O adapter "
+ "driver received an unexpected response code 0x%x "
+ "for operation: %s. If this continues to occur, "
+ "report the condition to your hypervisor vendor so "
+ "they can rectify the issue.\n", srb_status,
+ scsi_op_desc(cmd->opcode, NULL));
}
- ccb->ccb_h.status |= CAM_DEV_NOT_THERE;
} else {
ccb->ccb_h.status |= CAM_REQ_CMP;
}
diff --git a/sys/dev/hyperv/storvsc/hv_vstorage.h b/sys/dev/hyperv/storvsc/hv_vstorage.h
index 866623c22e7a..f1d4c1dfd2e2 100644
--- a/sys/dev/hyperv/storvsc/hv_vstorage.h
+++ b/sys/dev/hyperv/storvsc/hv_vstorage.h
@@ -241,12 +241,34 @@ struct vstor_packet {
/**
* SRB (SCSI Request Block) Status Codes
*/
-#define SRB_STATUS_PENDING 0x00
-#define SRB_STATUS_SUCCESS 0x01
-#define SRB_STATUS_ABORTED 0x02
-#define SRB_STATUS_ERROR 0x04
-#define SRB_STATUS_DATA_OVERRUN 0x12
-#define SRB_STATUS_INVALID_LUN 0x20
+#define SRB_STATUS_PENDING 0x00
+#define SRB_STATUS_SUCCESS 0x01
+#define SRB_STATUS_ABORTED 0x02
+#define SRB_STATUS_ABORT_FAILED 0x03
+#define SRB_STATUS_ERROR 0x04
+#define SRB_STATUS_BUSY 0x05
+#define SRB_STATUS_INVALID_REQUEST 0x06
+#define SRB_STATUS_INVALID_PATH_ID 0x07
+#define SRB_STATUS_NO_DEVICE 0x08
+#define SRB_STATUS_TIMEOUT 0x09
+#define SRB_STATUS_SELECTION_TIMEOUT 0x0A
+#define SRB_STATUS_COMMAND_TIMEOUT 0x0B
+#define SRB_STATUS_MESSAGE_REJECTED 0x0D
+#define SRB_STATUS_BUS_RESET 0x0E
+#define SRB_STATUS_PARITY_ERROR 0x0F
+#define SRB_STATUS_REQUEST_SENSE_FAILED 0x10
+#define SRB_STATUS_NO_HBA 0x11
+#define SRB_STATUS_DATA_OVERRUN 0x12
+#define SRB_STATUS_UNEXPECTED_BUS_FREE 0x13
+#define SRB_STATUS_PHASE_SEQUENCE_FAILURE 0x14
+#define SRB_STATUS_BAD_SRB_BLOCK_LENGTH 0x15
+#define SRB_STATUS_REQUEST_FLUSHED 0x16
+#define SRB_STATUS_INVALID_LUN 0x20
+#define SRB_STATUS_INVALID_TARGET_ID 0x21
+#define SRB_STATUS_BAD_FUNCTION 0x22
+#define SRB_STATUS_ERROR_RECOVERY 0x23
+#define SRB_STATUS_NOT_POWERED 0x24
+#define SRB_STATUS_LINK_DOWN 0x25
/**
* SRB Status Masks (can be combined with above status codes)
*/
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-23 08:24:06 +0000