aboutsummaryrefslogtreecommitdiff
path: root/sys/i386/isa/bt742a.c
diff options
context:
space:
mode:
Diffstat (limited to 'sys/i386/isa/bt742a.c')
-rw-r--r--sys/i386/isa/bt742a.c52
1 files changed, 26 insertions, 26 deletions
diff --git a/sys/i386/isa/bt742a.c b/sys/i386/isa/bt742a.c
index b2fed05f5831..cda418b72b74 100644
--- a/sys/i386/isa/bt742a.c
+++ b/sys/i386/isa/bt742a.c
@@ -12,13 +12,13 @@
* on the understanding that TFS is not responsible for the correct
* functioning of this software in any circumstances.
*
- * $Id: bt742a.c,v 1.34 1995/04/23 21:58:35 gibbs Exp $
+ * $Id: bt742a.c,v 1.35 1995/05/11 19:26:16 rgrimes Exp $
*/
/*
* Bulogic/Bustek 32 bit Addressing Mode SCSI driver.
*
- * NOTE: 1. Some bt5xx card can NOT handle 32 bit addressing mode.
+ * NOTE: 1. Some bt5xx card can NOT handle 32 bit addressing mode.
* 2. OLD bt445s Revision A,B,C,D(nowired) + any firmware version
* has broken busmaster for handling 32 bit addressing on H/W bus
* side.
@@ -599,7 +599,7 @@ bt_cmd(unit, icnt, ocnt, wait, retval, opcode, args)
}
if (i == 0) {
if(!btprobing)
- printf("bt%d: bt_cmd, host not finished(0x%x)\n",
+ printf("bt%d: bt_cmd, host not finished(0x%x)\n",
unit, sts);
return (ENXIO);
}
@@ -693,7 +693,7 @@ btattach(dev)
{
int unit = dev->id_unit;
struct bt_data *bt = btdata[unit];
-
+
btprobing = 0;
/*
* fill in the prototype scsi_link.
@@ -717,7 +717,7 @@ btattach(dev)
* Return some information to the caller about the adapter and its
* capabilities.
*/
-u_int32
+u_int32
bt_adapter_info(unit)
int unit;
{
@@ -745,7 +745,7 @@ btintr(unit)
/*
* First acknowlege the interrupt, Then if it's
* not telling about a completed operation
- * just return.
+ * just return.
*/
stat = inb(BT_INTR_PORT);
@@ -824,7 +824,7 @@ btintr(unit)
,wmbi->stat, wmbi);
printf("addr = 0x%x\n", ccb);
}
-#endif
+#endif
}
wmbi->stat = BT_MBI_FREE;
if (ccb) {
@@ -885,7 +885,7 @@ bt_free_ccb(unit, ccb, flags)
}
/*
- * Get a free ccb
+ * Get a free ccb
*
* If there are none, see if we can allocate a new one. If so, put it in
* the hash table too otherwise either return an error or sleep.
@@ -968,7 +968,7 @@ bt_ccb_phys_kv(bt, ccb_phys)
}
/*
- * Get a MBO and then Send it
+ * Get a MBO and then Send it
*/
BT_MBO *
bt_send_mbo(int unit, int flags, int cmd, struct bt_ccb *ccb)
@@ -988,7 +988,7 @@ bt_send_mbo(int unit, int flags, int cmd, struct bt_ccb *ccb)
wmbx->tmbo = (wmbo == &(wmbx->mbo[BT_MBX_SIZE - 1]) ?
&(wmbx->mbo[0]) : wmbo + 1);
- /*
+ /*
* Check the outmail box is free or not.
* Note: Under the normal operation, it shuld NOT happen to wait.
*/
@@ -1102,7 +1102,7 @@ bt_init(unit)
struct bt_board_info binfo;
/*
- * reset board, If it doesn't respond, assume
+ * reset board, If it doesn't respond, assume
* that it's not there.. good for the probe
*/
@@ -1131,7 +1131,7 @@ bt_init(unit)
*/
i = bt_cmd(unit, 1, sizeof(binfo),0,
&binfo,BT_GET_BOARD_INFO,sizeof(binfo));
- if(i)
+ if(i)
return i;
printf("bt%d: Bt%c%c%c%c/%c%d-", unit,
binfo.id[0],
@@ -1152,10 +1152,10 @@ bt_init(unit)
switch (info.bus_type) {
case BT_BUS_TYPE_24bit: /* PC/AT 24 bit address bus */
printf("ISA(24bit) bus\n");
- break;
+ break;
case BT_BUS_TYPE_32bit: /* EISA/VLB/PCI 32 bit bus */
printf("PCI/EISA/VLB(32bit) bus\n");
- break;
+ break;
case BT_BUS_TYPE_MCA: /* forget it right now */
printf("MCA bus architecture...");
printf("giving up\n");
@@ -1170,7 +1170,7 @@ bt_init(unit)
if ( binfo.id[0] == '5' ) {
printf("bt%d: This driver is designed for using 32 bit addressing\n",unit);
printf("bt%d: mode firmware and EISA/PCI/VLB bus architectures\n",unit);
- printf("bt%d: Bounce-buffering will be used (and is necessary)\n", unit);
+ printf("bt%d: Bounce-buffering will be used (and is necessary)\n", unit);
printf("bt%d: if you have more than 16MBytes memory.\n",unit);
} else if ( info.bus_type == BT_BUS_TYPE_24bit ) {
printf("bt%d: Your board should report a 32bit bus architecture type..\n",unit);
@@ -1247,7 +1247,7 @@ bt_init(unit)
/* who are we on the scsi bus */
bt->bt_scsi_dev = conf.scsi_dev;
/*
- * Initialize mail box
+ * Initialize mail box
*/
*((physaddr *) ad) = KVTOPHYS(&bt->bt_mbx);
bt_cmd(unit, 5, 0, 0, 0, BT_MBX_INIT_EXTENDED
@@ -1307,7 +1307,7 @@ bt_inquire_setup_information(
* Get a SCSI Synchronous value
*/
if ( info->s.sync ) {
- bt_cmd(unit, 1, sizeof(sync), 100,
+ bt_cmd(unit, 1, sizeof(sync), 100,
&sync,BT_GET_SYNC_VALUE,sizeof(sync));
}
@@ -1359,7 +1359,7 @@ bt_inquire_setup_information(
/*
* Displayi SCSI negotiation value by each target.
- * amurai@spec.co.jp
+ * amurai@spec.co.jp
*/
for (i = 0; i < 8; i++) {
if (!setup.sync[i].valid )
@@ -1377,9 +1377,9 @@ bt_inquire_setup_information(
}
}
- /*
+ /*
* Enable round-robin scheme - appeared at firmware rev. 3.31
- * Below rev 3.XX firmware has a problem for issuing
+ * Below rev 3.XX firmware has a problem for issuing
* BT_ROUND_ROBIN command amurai@spec.co.jp
*/
if ( bID.firm_revision >= '3' ) {
@@ -1395,7 +1395,7 @@ bt_inquire_setup_information(
#define min(x,y) (x < y ? x : y)
#endif /* min */
-void
+void
btminphys(bp)
struct buf *bp;
{
@@ -1408,7 +1408,7 @@ btminphys(bp)
* start a scsi operation given the command and the data address. Also needs
* the unit, target and lu.
*/
-int32
+int32
bt_scsi_cmd(xs)
struct scsi_xfer *xs;
{
@@ -1512,8 +1512,8 @@ bt_scsi_cmd(xs)
nextphys = thisphys;
while ((datalen) && (thisphys == nextphys))
/*
- * This page is contiguous (physically) with
- * the the last, just extend the length
+ * This page is contiguous (physically) with
+ * the the last, just extend the length
*/
{
/* how far to the end of the page */
@@ -1589,7 +1589,7 @@ bt_scsi_cmd(xs)
/*
* Poll a particular unit, looking for a particular xs
*/
-int
+int
bt_poll(unit, xs, ccb)
int unit;
struct scsi_xfer *xs;
@@ -1700,7 +1700,7 @@ bt_timeout(void *arg1)
ccb->xfer->retries = 0; /* I MEAN IT ! */
ccb->host_stat = BT_ABORTED;
bt_done(unit, ccb);
- } else {
+ } else {
/* abort the operation that has timed out */
printf("bt%d: Try to abort\n", unit);
bt_send_mbo(unit, ~SCSI_NOMASK,
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-26 06:28:13 +0000