diff options
Diffstat (limited to 'share/man/man4/man4.i386/ctau.4')
| -rw-r--r-- | share/man/man4/man4.i386/ctau.4 | 119 |
1 files changed, 119 insertions, 0 deletions
diff --git a/share/man/man4/man4.i386/ctau.4 b/share/man/man4/man4.i386/ctau.4 new file mode 100644 index 000000000000..e18dc347ad32 --- /dev/null +++ b/share/man/man4/man4.i386/ctau.4 @@ -0,0 +1,119 @@ +.\" Copyright (c) 2004 Roman Kurakin <rik@cronyx.ru> +.\" Copyright (c) 2004 Cronyx Engineering +.\" All rights reserved. +.\" +.\" This software is distributed with NO WARRANTIES, not even the implied +.\" warranties for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" Authors grant any other persons or organisations a permission to use, +.\" modify and redistribute this software in source and binary forms, +.\" as long as this message is kept with the software, all derivative +.\" works or modified versions. +.\" +.\" Cronyx Id: ct.4,v 1.1.2.6 2004/06/21 17:56:40 rik Exp $ +.\" $FreeBSD$ +.\" +.Dd September 6, 2004 +.Dt CTAU 4 i386 +.Os +.Sh NAME +.Nm ctau +.Nd driver for synchronous Cronyx Tau WAN adapters +.Sh SYNOPSIS +.Cd "device ctau" +.Pp +Additional options: +.Cd "device sppp" +.Cd "options NETGRAPH" +.Cd "options NETGRAPH_CRONYX" +.Pp +In +.Pa /boot/device.hints : +.Cd hint.ctau.0.at="isa" +.Cd hint.ctau.0.port="0x240" +.Cd hint.ctau.0.irq="15" +.Cd hint.ctau.0.drq="7" +.Sh DESCRIPTION +The +.Nm +driver needs either +.Xr sppp 4 +or +.Xr netgraph 4 . +Which one to use is determined by the +.Dv NETGRAPH_CRONYX +option. +If this option is present in your kernel configuration file, the +.Nm +driver will be compiled with +.Xr netgraph 4 +support. +Otherwise, it will be compiled with +.Xr sppp 4 +support. +.Pp +The base I/O port address specified in +.Pa /boot/device.hints +must match the port address set by the jumpers on the board. +The DMA I/O channel and interrupt request numbers are configured +by software at adapter initialization. +Legal values are: +.Pp +.Bl -tag -compact -width Port: +.It Port : +0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, +0x300, 0x320, 0x340, 0x360, 0x380, 0x3a0, 0x3c0, 0x3e0 +.It IRQ : +3, 5, 7, 10, 11, 12, 15 +.It DMA : +5, 6, 7 +.El +.Pp +The +.Nm +driver supports autodetection. +As for all non-PNP hardware, using +autodetection could lead to some potential problems with other devices during +the hardware detection process. +It is always better to specify hardware resources manually. +.Pp +Refer to +.Xr sconfig 8 +for information about the +.Nm +adapter configuration. +.Sh HARDWARE +The +.Nm +driver supports the following cards: +.Pp +.Bl -bullet -compact +.It +Cronyx Tau (RS-232/V.35) +.It +Cronyx Tau/R (RS-530/RS-449) +.It +Cronyx Tau/E1 (fractional E1) +.It +Cronyx Tau/G703 (unframed E1) +.El +.Sh SEE ALSO +.Xr cp 4 , +.Xr cx 4 , +.Xr sppp 4 , +.Xr ifconfig 8 , +.Xr sconfig 8 , +.Xr spppcontrol 8 +.Sh HISTORY +The +.Nm +driver was added in +.Fx 5.3 +and +.Fx 4.10 . +The +.Nm +driver for previous versions of +.Fx +is available from +.Pa http://www.cronyx.ru/ . |