diff options
Diffstat (limited to 'share/man/man4/bge.4')
-rw-r--r-- | share/man/man4/bge.4 | 262 |
1 files changed, 262 insertions, 0 deletions
diff --git a/share/man/man4/bge.4 b/share/man/man4/bge.4 new file mode 100644 index 000000000000..d4cc265237b7 --- /dev/null +++ b/share/man/man4/bge.4 @@ -0,0 +1,262 @@ +.\" Copyright (c) 2001 Wind River Systems +.\" Copyright (c) 1997, 1998, 1999, 2000, 2001 +.\" Bill Paul <wpaul@windriver.com>. All rights reserved. +.\" +.\" Redistribution and use in source and binary forms, with or without +.\" modification, are permitted provided that the following conditions +.\" are met: +.\" 1. Redistributions of source code must retain the above copyright +.\" notice, this list of conditions and the following disclaimer. +.\" 2. Redistributions in binary form must reproduce the above copyright +.\" notice, this list of conditions and the following disclaimer in the +.\" documentation and/or other materials provided with the distribution. +.\" 3. All advertising materials mentioning features or use of this software +.\" must display the following acknowledgement: +.\" This product includes software developed by Bill Paul. +.\" 4. Neither the name of the author nor the names of any co-contributors +.\" may be used to endorse or promote products derived from this software +.\" without specific prior written permission. +.\" +.\" THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND +.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +.\" ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD +.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF +.\" THE POSSIBILITY OF SUCH DAMAGE. +.\" +.\" $FreeBSD$ +.\" +.Dd May 19, 2009 +.Dt BGE 4 +.Os +.Sh NAME +.Nm bge +.Nd "Broadcom BCM570x/5714/5721/5722/5750/5751/5752/5789 PCI Gigabit Ethernet adapter driver" +.Sh SYNOPSIS +To compile this driver into the kernel, +place the following lines in your +kernel configuration file: +.Bd -ragged -offset indent +.Cd "device miibus" +.Cd "device bge" +.Ed +.Pp +Alternatively, to load the driver as a +module at boot time, place the following line in +.Xr loader.conf 5 : +.Bd -literal -offset indent +if_bge_load="YES" +.Ed +.Sh DESCRIPTION +The +.Nm +driver provides support for various NICs based on the Broadcom BCM570x, +5714, 5721, 5722, 5750, 5751, 5752 and 5789 families of Gigabit Ethernet +controller chips. +.Pp +All of these NICs are capable of 10, 100 and 1000Mbps speeds over CAT5 +copper cable, except for the SysKonnect SK-9D41 which supports only +1000Mbps over multimode fiber. +The BCM570x builds upon the technology of the Alteon Tigon II. +It has two R4000 CPU cores and is PCI v2.2 and PCI-X v1.0 compliant. +It supports IP, TCP +and UDP checksum offload for both receive and transmit, +multiple RX and TX DMA rings for QoS applications, rules-based +receive filtering, and VLAN tag stripping/insertion as well as +a 256-bit multicast hash filter. +Additional features may be +provided via value-add firmware updates. +The BCM570x supports TBI (ten bit interface) and GMII +transceivers, which means it can be used with either copper or 1000baseX +fiber applications. +Note however the device only supports a single +speed in TBI mode. +.Pp +Most BCM5700-based cards also use the Broadcom BCM5401 or BCM5411 10/100/1000 +copper gigabit transceivers, +which support autonegotiation of 10, 100 and 1000Mbps modes in +full or half duplex. +.Pp +The BCM5700, BCM5701, BCM5702, BCM5703 and BCM5704 also support +jumbo frames, which can be configured +via the interface MTU setting. +Selecting an MTU larger than 1500 bytes with the +.Xr ifconfig 8 +utility configures the adapter to receive and transmit jumbo frames. +Using jumbo frames can greatly improve performance for certain tasks, +such as file transfers and data streaming. +.Pp +The +.Nm +driver supports the following media types: +.Bl -tag -width ".Cm 10baseT/UTP" +.It Cm autoselect +Enable autoselection of the media type and options. +The user can manually override +the autoselected mode by adding media options to +.Xr rc.conf 5 . +.It Cm 10baseT/UTP +Set 10Mbps operation. +The +.Xr ifconfig 8 +.Ic mediaopt +option can also be used to select either +.Cm full-duplex +or +.Cm half-duplex +modes. +.It Cm 100baseTX +Set 100Mbps (Fast Ethernet) operation. +The +.Xr ifconfig 8 +.Ic mediaopt +option can also be used to select either +.Cm full-duplex +or +.Cm half-duplex +modes. +.It Cm 1000baseTX +Set 1000baseTX operation over twisted pair. +Only +.Cm full-duplex +mode is supported. +.It Cm 1000baseSX +Set 1000Mbps (Gigabit Ethernet) operation. +Both +.Cm full-duplex +and +.Cm half-duplex +modes are supported. +.El +.Pp +The +.Nm +driver supports the following media options: +.Bl -tag -width ".Cm full-duplex" +.It Cm full-duplex +Force full duplex operation. +.It Cm half-duplex +Force half duplex operation. +.El +.Pp +The +.Nm +driver also supports one special link option for 1000baseTX cards: +.Bl -tag -width ".Cm link0" +.It Cm link0 +With 1000baseTX cards, establishing a link between two ports requires +that one port be configured as a master and the other a slave. +With autonegotiation, +the master/slave settings will be chosen automatically. +However when manually selecting the link state, it is necessary to +force one side of the link to be a master and the other a slave. +The +.Nm +driver configures the ports as slaves by default. +Setting the +.Cm link0 +flag with +.Xr ifconfig 8 +will set a port as a master instead. +.El +.Pp +For more information on configuring this device, see +.Xr ifconfig 8 . +.Sh HARDWARE +The +.Nm +driver provides support for various NICs based on the Broadcom BCM570x +family of Gigabit Ethernet controller chips, including the +following: +.Pp +.Bl -bullet -compact +.It +3Com 3c996-SX (1000baseSX) +.It +3Com 3c996-T (10/100/1000baseTX) +.It +Dell PowerEdge 1750 integrated BCM5704C NIC (10/100/1000baseTX) +.It +Dell PowerEdge 2550 integrated BCM5700 NIC (10/100/1000baseTX) +.It +Dell PowerEdge 2650 integrated BCM5703 NIC (10/100/1000baseTX) +.It +Dell PowerEdge R200 integrated BCM5750 NIC (10/100/1000baseTX) +.It +Dell PowerEdge R300 integrated BCM5722 NIC (10/100/1000baseTX) +.It +IBM x235 server integrated BCM5703x NIC (10/100/1000baseTX) +.It +HP Compaq dc7600 integrated BCM5752 NIC (10/100/1000baseTX) +.It +HP ProLiant NC7760 embedded Gigabit NIC (10/100/1000baseTX) +.It +HP ProLiant NC7770 PCI-X Gigabit NIC (10/100/1000baseTX) +.It +HP ProLiant NC7771 PCI-X Gigabit NIC (10/100/1000baseTX) +.It +HP ProLiant NC7781 embedded PCI-X Gigabit NIC (10/100/1000baseTX) +.It +Netgear GA302T (10/100/1000baseTX) +.It +SysKonnect SK-9D21 (10/100/1000baseTX) +.It +SysKonnect SK-9D41 (1000baseSX) +.El +.Sh LOADER TUNABLES +The following tunable can be set at the +.Xr loader 8 +prompt before booting the kernel, or stored in +.Xr loader.conf 5 . +.Bl -tag -width indent +.It Va hw.bge.allow_asf +Allow the ASF feature for cooperating with IPMI. +Can cause system lockup problems on a small number of systems. +Enabled by default. +.El +.Sh DIAGNOSTICS +.Bl -diag +.It "bge%d: couldn't map memory" +A fatal initialization error has occurred. +.It "bge%d: couldn't map ports" +A fatal initialization error has occurred. +.It "bge%d: couldn't map interrupt" +A fatal initialization error has occurred. +.It "bge%d: no memory for softc struct!" +The driver failed to allocate memory for per-device instance information +during initialization. +.It "bge%d: failed to enable memory mapping!" +The driver failed to initialize PCI shared memory mapping. +This might +happen if the card is not in a bus-master slot. +.It "bge%d: no memory for jumbo buffers!" +The driver failed to allocate memory for jumbo frames during +initialization. +.It "bge%d: watchdog timeout" +The device has stopped responding to the network, or there is a problem with +the network connection (cable). +.El +.Sh SEE ALSO +.Xr altq 4 , +.Xr arp 4 , +.Xr miibus 4 , +.Xr netintro 4 , +.Xr ng_ether 4 , +.Xr polling 4 , +.Xr vlan 4 , +.Xr ifconfig 8 +.Sh HISTORY +The +.Nm +device driver first appeared in +.Fx 4.5 . +.Sh AUTHORS +The +.Nm +driver was written by +.An Bill Paul Aq wpaul@windriver.com . |