diff options
Diffstat (limited to 'share/examples/etc/make.conf')
| -rw-r--r-- | share/examples/etc/make.conf | 272 |
1 files changed, 272 insertions, 0 deletions
diff --git a/share/examples/etc/make.conf b/share/examples/etc/make.conf new file mode 100644 index 000000000000..1e08f79c8a9f --- /dev/null +++ b/share/examples/etc/make.conf @@ -0,0 +1,272 @@ +# $FreeBSD$ +# +# NOTE: Please would any committer updating this file also update the +# make.conf(5) manual page, if necessary, which is located in +# src/share/man/man5/make.conf.5. +# +# /etc/make.conf, if present, will be read by make (see +# /usr/share/mk/sys.mk). It allows you to override macro definitions +# to make without changing your source tree, or anything the source +# tree installs. +# +# This file must be in valid Makefile syntax. +# +# There are additional things you can put into /etc/make.conf. +# You have to find those in the Makefiles and documentation of +# the source tree. +# +# Note, that you should not set MAKEOBJDIRPREFIX or MAKEOBJDIR +# from make.conf (or as command line variables to make). +# Both variables are environment variables for make and must be used as: +# +# env MAKEOBJDIRPREFIX=/big/directory make +# +# +# The CPUTYPE variable controls which processor should be targeted for +# generated code. This controls processor-specific optimizations in +# certain code (currently only OpenSSL) as well as modifying the value +# of CFLAGS to contain the appropriate optimization directive to gcc. +# The automatic setting of CFLAGS may be overridden using the +# NO_CPU_CFLAGS variable below. +# Currently the following CPU types are recognized: +# Intel x86 architecture: +# (AMD CPUs) opteron athlon64 athlon-mp athlon-xp athlon-4 +# athlon-tbird athlon k8 k6-3 k6-2 k6 k5 +# (Intel CPUs) core2 core nocona pentium4m pentium4 prescott +# pentium3m pentium3 pentium-m pentium2 +# pentiumpro pentium-mmx pentium i486 i386 +# (Via CPUs) c3 c3-2 +# Alpha/AXP architecture: ev67 ev6 pca56 ev56 ev5 ev45 ev4 +# AMD64 architecture: opteron, athlon64, nocona, prescott, core2 +# Intel ia64 architecture: itanium2, itanium +# +# (?= allows to buildworld for a different CPUTYPE.) +# +#CPUTYPE?=pentium3 +#NO_CPU_CFLAGS= # Don't add -march=<cpu> to CFLAGS automatically +#NO_CPU_COPTFLAGS= # Don't add -march=<cpu> to COPTFLAGS automatically +# +# CFLAGS controls the compiler settings used when compiling C code. +# Note that optimization settings other than -O and -O2 are not recommended +# or supported for compiling the world or the kernel - please revert any +# nonstandard optimization settings to "-O" or "-O2 -fno-strict-aliasing" +# before submitting bug reports without patches to the developers. +# +# Compiling with -fstrict-aliasing optimization breaks some [notable] ports. +# GCC turns on -fstrict-aliasing optimization at all levels above -O[1], so +# explicitly turn it off when using compiling with the -O2 optimization level. +# +#CFLAGS= -O2 -fno-strict-aliasing -pipe +# +# CXXFLAGS controls the compiler settings used when compiling C++ code. +# Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish +# to add to CXXFLAGS value, "+=" must be used rather than "=". Using "=" +# alone will remove the often needed contents of CFLAGS from CXXFLAGS. +# +#CXXFLAGS+= -fconserve-space +# +# MAKE_SHELL controls the shell used internally by make(1) to process the +# command scripts in makefiles. Three shells are supported, sh, ksh, and +# csh. Using sh is most common, and advised. Using ksh *may* work, but is +# not guaranteed to. Using csh is absurd. The default is to use sh. +# +#MAKE_SHELL?=sh +# +# BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested +# for use in developing FreeBSD and testing changes. They can be used by +# putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not +# included here due to compiler bugs, e.g., mkdir()'s mode_t argument. +# +#BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \ +# -Wcast-qual -Wchar-subscripts -Winline \ +# -Wmissing-prototypes -Wnested-externs -Wpointer-arith \ +# -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings +# +# To compile just the kernel with special optimizations, you should use +# this instead of CFLAGS (which is not applicable to kernel builds anyway). +# There is very little to gain by using higher optimization levels, and doing +# so can cause problems. +# +#COPTFLAGS= -O -pipe +# +# Compare before install +#INSTALL=install -C +# +# Mtree will follow symlinks +#MTREE_FOLLOWS_SYMLINKS= -L +# +# To enable installing ssh(1) with the setuid bit turned on +#ENABLE_SUID_SSH= +# +# To enable installing newgrp(1) with the setuid bit turned on. +# Without the setuid bit, newgrp cannot change users' groups. +#ENABLE_SUID_NEWGRP= +# +# To avoid building various parts of the base system: +#NO_MODULES= # do not build modules with the kernel +#NO_SHARE= # do not go into the share subdir +#NO_SHARED= # build /bin and /sbin statically linked (bad idea) +# +# Variables that control how ppp(8) is built. +#PPP_NO_NAT= # do not build with NAT support (see make.conf(5)) +#PPP_NO_NETGRAPH= # do not build with Netgraph support +#PPP_NO_RADIUS= # do not build with RADIUS support +#PPP_NO_SUID= # build with normal permissions +# +#TRACEROUTE_NO_IPSEC= # do not build traceroute(8) with IPSEC support +# +# To build sys/modules when building the world (our old way of doing things) +#MODULES_WITH_WORLD= # do not build modules when building kernel +# +# The list of modules to build instead of all of them. +#MODULES_OVERRIDE= linux ipfw +# +# The list of modules to never build, applied *after* MODULES_OVERRIDE. +#WITHOUT_MODULES= bktr plip +# +# If you do not want unformatted manual pages to be compressed +# when they are installed: +# +#NO_MANCOMPRESS= +# +# +# Default format for system documentation, depends on your printer. +# Set this to "ascii" for simple printers or screen +# +#PRINTERDEVICE= ps +# +# +# How long to wait for a console keypress before booting the default kernel. +# This value is approximately in milliseconds. Keypresses are accepted by the +# BIOS before booting from disk, making it possible to give custom boot +# parameters even when this is set to 0. +# +#BOOTWAIT=0 +#BOOTWAIT=30000 +# +# By default, the system will always use the keyboard/video card as system +# console. However, the boot blocks may be dynamically configured to use a +# serial port in addition to or instead of the keyboard/video console. +# +# By default we use COM1 as our serial console port *if* we're going to use +# a serial port as our console at all. Alter as necessary. +# +# COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8 +# +#BOOT_COMCONSOLE_PORT= 0x3F8 +# +# The default serial console speed is 9600. Set the speed to a larger value +# for better interactive response. +# +#BOOT_COMCONSOLE_SPEED= 115200 +# +# By default the 'pxeboot' loader retrieves the kernel via NFS. Defining +# this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel +# via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet +# still mount the server's '/' (i.e. rather than load the server's kernel). +# +#LOADER_TFTP_SUPPORT= YES +# +# +# Kerberos 5 su (k5su) +# If you want to use the k5su utility, define this to have it installed +# set-user-ID. +#ENABLE_SUID_K5SU= +# +# +# CVSup update flags. Edit SUPFILE settings to reflect whichever distribution +# file(s) you use on your site (see /usr/share/examples/cvsup/README for more +# information on CVSup and these files). To use, do "make update" in /usr/src. +# +#SUP_UPDATE= +# +#SUP= /usr/bin/csup +#SUPFLAGS= -g -L 2 +#SUPHOST= cvsup.uk.FreeBSD.org +#SUPFILE= /usr/share/examples/cvsup/standard-supfile +#PORTSSUPFILE= /usr/share/examples/cvsup/ports-supfile +#DOCSUPFILE= /usr/share/examples/cvsup/doc-supfile +# +# top(1) uses a hash table for the user names. The size of this hash +# can be tuned to match the number of local users. The table size should +# be a prime number approximately twice as large as the number of lines in +# /etc/passwd. The default number is 20011. +# +#TOP_TABLE_SIZE= 101 +# +# Documentation +# +# The list of languages and encodings to build and install +# +#DOC_LANG= en_US.ISO8859-1 ru_RU.KOI8-R +# +# +# sendmail +# +# The following sets the default m4 configuration file to use at +# install time. Use with caution as a make install will overwrite +# any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now +# deprecated. The value should be a fully qualified path name. +# +#SENDMAIL_MC=/etc/mail/myconfig.mc +# +# The following sets the default m4 configuration file for mail +# submission to use at install time. Use with caution as a make +# install will overwrite any existing /etc/mail/submit.cf. The +# value should be a fully qualified path name. +# +#SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc +# +# If you need to build additional .cf files during a make buildworld, +# include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC. +# +#SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc +# +# The following overrides the default location for the m4 configuration +# files used to build a .cf file from a .mc file. +# +#SENDMAIL_CF_DIR=/usr/local/share/sendmail/cf +# +# Setting the following variable modifies the flags passed to m4 when +# building a .cf file from a .mc file. It can be used to enable +# features disabled by default. +# +#SENDMAIL_M4_FLAGS= +# +# Setting the following variables modifies the build environment for +# sendmail and its related utilities. For example, SASL support can be +# added with settings such as: +# +# with SASLv1: +# SENDMAIL_CFLAGS=-I/usr/local/include/sasl1 -DSASL +# SENDMAIL_LDFLAGS=-L/usr/local/lib +# SENDMAIL_LDADD=-lsasl +# +# with SASLv2: +# SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2 +# SENDMAIL_LDFLAGS=-L/usr/local/lib +# SENDMAIL_LDADD=-lsasl2 +# +# Note: If you are using Cyrus SASL with other applications which require +# access to the sasldb file, you should add the following to your +# sendmail.mc file: +# +# define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile') +# +#SENDMAIL_CFLAGS= +#SENDMAIL_LDFLAGS= +#SENDMAIL_LDADD= +#SENDMAIL_DPADD= +# +# Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a +# set-user-ID root binary instead of a set-group-ID smmsp binary and will +# prevent the installation of /etc/mail/submit.cf. +# This is a deprecated mode of operation. See etc/mail/README for more +# information. +# +#SENDMAIL_SET_USER_ID= +# +# The permissions to use on alias and map databases generated using +# /etc/mail/Makefile. Defaults to 0640. +# +#SENDMAIL_MAP_PERMS= |