diff options
Diffstat (limited to 'resources/rsmisc.c')
-rw-r--r-- | resources/rsmisc.c | 266 |
1 files changed, 262 insertions, 4 deletions
diff --git a/resources/rsmisc.c b/resources/rsmisc.c index 45415faacc2b..3cdd5f10add2 100644 --- a/resources/rsmisc.c +++ b/resources/rsmisc.c @@ -94,6 +94,11 @@ AcpiRsConvertAmlToResource ( ACPI_FUNCTION_TRACE (RsConvertAmlToResource); + if (!Info) + { + return_ACPI_STATUS (AE_BAD_PARAMETER); + } + if (((ACPI_SIZE) Resource) & 0x3) { /* Each internal resource struct is expected to be 32-bit aligned */ @@ -112,7 +117,6 @@ AcpiRsConvertAmlToResource ( * table length (# of table entries) */ Count = INIT_TABLE_LENGTH (Info); - while (Count) { /* @@ -162,6 +166,15 @@ AcpiRsConvertAmlToResource ( break; + case ACPI_RSC_3BITFLAG: + /* + * Mask and shift the flag bits + */ + ACPI_SET8 (Destination) = (UINT8) + ((ACPI_GET8 (Source) >> Info->Value) & 0x07); + break; + + case ACPI_RSC_COUNT: ItemCount = ACPI_GET8 (Source); @@ -182,6 +195,75 @@ AcpiRsConvertAmlToResource ( break; + case ACPI_RSC_COUNT_GPIO_PIN: + + Target = ACPI_ADD_PTR (void, Aml, Info->Value); + ItemCount = ACPI_GET16 (Target) - ACPI_GET16 (Source); + + Resource->Length = Resource->Length + ItemCount; + ItemCount = ItemCount / 2; + ACPI_SET16 (Destination) = ItemCount; + break; + + + case ACPI_RSC_COUNT_GPIO_VEN: + + ItemCount = ACPI_GET8 (Source); + ACPI_SET8 (Destination) = (UINT8) ItemCount; + + Resource->Length = Resource->Length + + (Info->Value * ItemCount); + break; + + + case ACPI_RSC_COUNT_GPIO_RES: + + /* + * Vendor data is optional (length/offset may both be zero) + * Examine vendor data length field first + */ + Target = ACPI_ADD_PTR (void, Aml, (Info->Value + 2)); + if (ACPI_GET16 (Target)) + { + /* Use vendor offset to get resource source length */ + + Target = ACPI_ADD_PTR (void, Aml, Info->Value); + ItemCount = ACPI_GET16 (Target) - ACPI_GET16 (Source); + } + else + { + /* No vendor data to worry about */ + + ItemCount = Aml->LargeHeader.ResourceLength + + sizeof (AML_RESOURCE_LARGE_HEADER) - + ACPI_GET16 (Source); + } + + Resource->Length = Resource->Length + ItemCount; + ACPI_SET16 (Destination) = ItemCount; + break; + + + case ACPI_RSC_COUNT_SERIAL_VEN: + + ItemCount = ACPI_GET16 (Source) - Info->Value; + + Resource->Length = Resource->Length + ItemCount; + ACPI_SET16 (Destination) = ItemCount; + break; + + + case ACPI_RSC_COUNT_SERIAL_RES: + + ItemCount = (AmlResourceLength + + sizeof (AML_RESOURCE_LARGE_HEADER)) - + ACPI_GET16 (Source) - Info->Value; + + Resource->Length = Resource->Length + ItemCount; + ACPI_SET16 (Destination) = ItemCount; + break; + + case ACPI_RSC_LENGTH: Resource->Length = Resource->Length + Info->Value; @@ -204,6 +286,66 @@ AcpiRsConvertAmlToResource ( break; + case ACPI_RSC_MOVE_GPIO_PIN: + + /* Generate and set the PIN data pointer */ + + Target = (char *) ACPI_ADD_PTR (void, Resource, + (Resource->Length - ItemCount * 2)); + *(UINT16 **) Destination = ACPI_CAST_PTR (UINT16, Target); + + /* Copy the PIN data */ + + Source = ACPI_ADD_PTR (void, Aml, ACPI_GET16 (Source)); + AcpiRsMoveData (Target, Source, ItemCount, Info->Opcode); + break; + + + case ACPI_RSC_MOVE_GPIO_RES: + + /* Generate and set the ResourceSource string pointer */ + + Target = (char *) ACPI_ADD_PTR (void, Resource, + (Resource->Length - ItemCount)); + *(UINT8 **) Destination = ACPI_CAST_PTR (UINT8, Target); + + /* Copy the ResourceSource string */ + + Source = ACPI_ADD_PTR (void, Aml, ACPI_GET16 (Source)); + AcpiRsMoveData (Target, Source, ItemCount, Info->Opcode); + break; + + + case ACPI_RSC_MOVE_SERIAL_VEN: + + /* Generate and set the Vendor Data pointer */ + + Target = (char *) ACPI_ADD_PTR (void, Resource, + (Resource->Length - ItemCount)); + *(UINT8 **) Destination = ACPI_CAST_PTR (UINT8, Target); + + /* Copy the Vendor Data */ + + Source = ACPI_ADD_PTR (void, Aml, Info->Value); + AcpiRsMoveData (Target, Source, ItemCount, Info->Opcode); + break; + + + case ACPI_RSC_MOVE_SERIAL_RES: + + /* Generate and set the ResourceSource string pointer */ + + Target = (char *) ACPI_ADD_PTR (void, Resource, + (Resource->Length - ItemCount)); + *(UINT8 **) Destination = ACPI_CAST_PTR (UINT8, Target); + + /* Copy the ResourceSource string */ + + Source = ACPI_ADD_PTR (void, Aml, (ACPI_GET16 (Source) + Info->Value)); + AcpiRsMoveData (Target, Source, ItemCount, Info->Opcode); + break; + + case ACPI_RSC_SET8: ACPI_MEMSET (Destination, Info->AmlOffset, Info->Value); @@ -243,11 +385,12 @@ AcpiRsConvertAmlToResource ( * Optional ResourceSource (Index and String). This is the more * complicated case used by the Interrupt() macro */ - Target = ACPI_ADD_PTR (char, Resource, Info->AmlOffset + (ItemCount * 4)); + Target = ACPI_ADD_PTR (char, Resource, + Info->AmlOffset + (ItemCount * 4)); Resource->Length += - AcpiRsGetResourceSource (AmlResourceLength, - (ACPI_RS_LENGTH) (((ItemCount - 1) * sizeof (UINT32)) + Info->Value), + AcpiRsGetResourceSource (AmlResourceLength, (ACPI_RS_LENGTH) + (((ItemCount - 1) * sizeof (UINT32)) + Info->Value), Destination, Aml, Target); break; @@ -356,6 +499,7 @@ AcpiRsConvertResourceToAml ( { void *Source = NULL; void *Destination; + char *Target; ACPI_RSDESC_SIZE AmlLength = 0; UINT8 Count; UINT16 Temp16 = 0; @@ -365,6 +509,11 @@ AcpiRsConvertResourceToAml ( ACPI_FUNCTION_TRACE (RsConvertResourceToAml); + if (!Info) + { + return_ACPI_STATUS (AE_BAD_PARAMETER); + } + /* * First table entry must be ACPI_RSC_INITxxx and must contain the * table length (# of table entries) @@ -420,6 +569,15 @@ AcpiRsConvertResourceToAml ( break; + case ACPI_RSC_3BITFLAG: + /* + * Mask and shift the flag bits + */ + ACPI_SET8 (Destination) |= (UINT8) + ((ACPI_GET8 (Source) & 0x07) << Info->Value); + break; + + case ACPI_RSC_COUNT: ItemCount = ACPI_GET8 (Source); @@ -437,6 +595,68 @@ AcpiRsConvertResourceToAml ( break; + case ACPI_RSC_COUNT_GPIO_PIN: + + ItemCount = ACPI_GET16 (Source); + ACPI_SET16 (Destination) = (UINT16) AmlLength; + + AmlLength = (UINT16) (AmlLength + ItemCount * 2); + Target = ACPI_ADD_PTR (void, Aml, Info->Value); + ACPI_SET16 (Target) = (UINT16) AmlLength; + AcpiRsSetResourceLength (AmlLength, Aml); + break; + + + case ACPI_RSC_COUNT_GPIO_VEN: + + ItemCount = ACPI_GET16 (Source); + ACPI_SET16 (Destination) = (UINT16) ItemCount; + + AmlLength = (UINT16) (AmlLength + (Info->Value * ItemCount)); + AcpiRsSetResourceLength (AmlLength, Aml); + break; + + + case ACPI_RSC_COUNT_GPIO_RES: + + /* Set resource source string length */ + + ItemCount = ACPI_GET16 (Source); + ACPI_SET16 (Destination) = (UINT16) AmlLength; + + /* Compute offset for the Vendor Data */ + + AmlLength = (UINT16) (AmlLength + ItemCount); + Target = ACPI_ADD_PTR (void, Aml, Info->Value); + + /* Set vendor offset only if there is vendor data */ + + if (Resource->Data.Gpio.VendorLength) + { + ACPI_SET16 (Target) = (UINT16) AmlLength; + } + + AcpiRsSetResourceLength (AmlLength, Aml); + break; + + + case ACPI_RSC_COUNT_SERIAL_VEN: + + ItemCount = ACPI_GET16 (Source); + ACPI_SET16 (Destination) = ItemCount + Info->Value; + AmlLength = (UINT16) (AmlLength + ItemCount); + AcpiRsSetResourceLength (AmlLength, Aml); + break; + + + case ACPI_RSC_COUNT_SERIAL_RES: + + ItemCount = ACPI_GET16 (Source); + AmlLength = (UINT16) (AmlLength + ItemCount); + AcpiRsSetResourceLength (AmlLength, Aml); + break; + + case ACPI_RSC_LENGTH: AcpiRsSetResourceLength (Info->Value, Aml); @@ -456,6 +676,44 @@ AcpiRsConvertResourceToAml ( break; + case ACPI_RSC_MOVE_GPIO_PIN: + + Destination = (char *) ACPI_ADD_PTR (void, Aml, + ACPI_GET16 (Destination)); + Source = * (UINT16 **) Source; + AcpiRsMoveData (Destination, Source, ItemCount, Info->Opcode); + break; + + + case ACPI_RSC_MOVE_GPIO_RES: + + /* Used for both ResourceSource string and VendorData */ + + Destination = (char *) ACPI_ADD_PTR (void, Aml, + ACPI_GET16 (Destination)); + Source = * (UINT8 **) Source; + AcpiRsMoveData (Destination, Source, ItemCount, Info->Opcode); + break; + + + case ACPI_RSC_MOVE_SERIAL_VEN: + + Destination = (char *) ACPI_ADD_PTR (void, Aml, + (AmlLength - ItemCount)); + Source = * (UINT8 **) Source; + AcpiRsMoveData (Destination, Source, ItemCount, Info->Opcode); + break; + + + case ACPI_RSC_MOVE_SERIAL_RES: + + Destination = (char *) ACPI_ADD_PTR (void, Aml, + (AmlLength - ItemCount)); + Source = * (UINT8 **) Source; + AcpiRsMoveData (Destination, Source, ItemCount, Info->Opcode); + break; + + case ACPI_RSC_ADDRESS: /* Set the Resource Type, General Flags, and Type-Specific Flags */ |