diff options
Diffstat (limited to 'html/driver35.htm')
| -rw-r--r-- | html/driver35.htm | 80 |
1 files changed, 0 insertions, 80 deletions
diff --git a/html/driver35.htm b/html/driver35.htm deleted file mode 100644 index 0e6aebf96e9c..000000000000 --- a/html/driver35.htm +++ /dev/null @@ -1,80 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN"> -<html> -<head> -<title>Conrad parallel port radio clock</title> -</head> -<body> - -<h3>Conrad parallel port radio clock</h3> -<hr> - -<h4>Synopsis</h4> - -<p>Address: 127.127.35.<i>u</i><br> -Reference ID: <tt>PCF</tt><br> -Driver ID: <tt>PCF</tt><br> -Parallel Port: <tt>/dev/pcfclocks/<i>u</i></tt> or <tt>/dev/pcfclock<i>u</i></tt> -</p> - -<h4>Description</h4> - -<p>This driver supports the parallel port radio clock sold by -<a href="http://www.conrad-electronic.com/">Conrad Electronic</a> under -order numbers 967602 and 642002. This clock is put between a parallel -port and your printer. It receives the legal German time, which is -either CET or CEST, from the DCF77 transmitter and uses it to set its -internal quartz clock. The DCF77 transmitter is located near to -Frankfurt/Main and covers a radius of more than 1500 kilometers. - -<p>The pcfclock device driver is required in order to use this -reference clock driver. Currently device drivers for -<a href="http://home.pages.de/~voegele/pcf.html">Linux</a> and -<a href="http://schumann.cx/pcfclock/">FreeBSD</a> are available.</p> - -<p>This driver uses C library functions to convert the received -timecode to UTC and thus requires that the local timezone be CET or -CEST. If your server is not located in Central Europe you have to set -the environment variable TZ to CET before starting <tt>ntpd</tt>. -</p> - -<h4>Monitor Data</h4> - -<p>Each timecode is written to the <tt>clockstats</tt> file in the format -<tt>YYYY MM DD HH MI SS</tt>.</p> - -<h4>Fudge Factors</h4> - -<dl> -<dt><tt>time1 <i>time</i></tt></dt> -<dd>Specifies the time offset calibration factor, in seconds and fraction, -with default 0.1725.</dd> - -<dt><tt>time2 <i>time</i></tt></dt> -<dd>Not used by this driver.</dd> - -<dt><tt>stratum <i>number</i></tt></dt> -<dd>Specifies the driver stratum, in decimal from 0 to 15, with default 0. -</dd> - -<dt><tt>refid <i>string</i></tt></dt> -<dd>Specifies the driver reference identifier, an ASCII string from one to -four characters, with default <tt>PCF</tt>.</dd> - -<dt><tt>flag1 0 | 1</tt></dt> -<dd>Not used by this driver.</dd> - -<dt><tt>flag2 0 | 1</tt></dt> -<dd>If set to 1, the radio clock's synchronisation status bit is -ignored, ie the timecode is used without a check.</dd> - -<dt><tt>flag3 0 | 1</tt></dt> -<dd>Not used by this driver.</dd> - -<dt><tt>flag4 0 | 1</tt></dt> -<dd>Not used by this driver.</dd> -</dl> - -<hr> -<address>Andreas Voegele <voegelas@users.sourceforge.net></address> -</body> -</html> |