diff options
Diffstat (limited to 'crypto/openssl/doc/apps/x509.pod')
| -rw-r--r-- | crypto/openssl/doc/apps/x509.pod | 706 |
1 files changed, 0 insertions, 706 deletions
diff --git a/crypto/openssl/doc/apps/x509.pod b/crypto/openssl/doc/apps/x509.pod deleted file mode 100644 index 84f76cb421be..000000000000 --- a/crypto/openssl/doc/apps/x509.pod +++ /dev/null @@ -1,706 +0,0 @@ - -=pod - -=head1 NAME - -x509 - Certificate display and signing utility - -=head1 SYNOPSIS - -B<openssl> B<x509> -[B<-inform DER|PEM|NET>] -[B<-outform DER|PEM|NET>] -[B<-keyform DER|PEM>] -[B<-CAform DER|PEM>] -[B<-CAkeyform DER|PEM>] -[B<-in filename>] -[B<-out filename>] -[B<-serial>] -[B<-hash>] -[B<-subject>] -[B<-issuer>] -[B<-nameopt option>] -[B<-email>] -[B<-startdate>] -[B<-enddate>] -[B<-purpose>] -[B<-dates>] -[B<-modulus>] -[B<-fingerprint>] -[B<-alias>] -[B<-noout>] -[B<-trustout>] -[B<-clrtrust>] -[B<-clrreject>] -[B<-addtrust arg>] -[B<-addreject arg>] -[B<-setalias arg>] -[B<-days arg>] -[B<-signkey filename>] -[B<-x509toreq>] -[B<-req>] -[B<-CA filename>] -[B<-CAkey filename>] -[B<-CAcreateserial>] -[B<-CAserial filename>] -[B<-text>] -[B<-C>] -[B<-md2|-md5|-sha1|-mdc2>] -[B<-clrext>] -[B<-extfile filename>] -[B<-extensions section>] - -=head1 DESCRIPTION - -The B<x509> command is a multi purpose certificate utility. It can be -used to display certificate information, convert certificates to -various forms, sign certificate requests like a "mini CA" or edit -certificate trust settings. - -Since there are a large number of options they will split up into -various sections. - - -=head1 INPUT, OUTPUT AND GENERAL PURPOSE OPTIONS - -=over 4 - -=item B<-inform DER|PEM|NET> - -This specifies the input format normally the command will expect an X509 -certificate but this can change if other options such as B<-req> are -present. The DER format is the DER encoding of the certificate and PEM -is the base64 encoding of the DER encoding with header and footer lines -added. The NET option is an obscure Netscape server format that is now -obsolete. - -=item B<-outform DER|PEM|NET> - -This specifies the output format, the options have the same meaning as the -B<-inform> option. - -=item B<-in filename> - -This specifies the input filename to read a certificate from or standard input -if this option is not specified. - -=item B<-out filename> - -This specifies the output filename to write to or standard output by -default. - -=item B<-md2|-md5|-sha1|-mdc2> - -the digest to use. This affects any signing or display option that uses a message -digest, such as the B<-fingerprint>, B<-signkey> and B<-CA> options. If not -specified then MD5 is used. If the key being used to sign with is a DSA key then -this option has no effect: SHA1 is always used with DSA keys. - - -=back - -=head1 DISPLAY OPTIONS - -Note: the B<-alias> and B<-purpose> options are also display options -but are described in the B<TRUST OPTIONS> section. - -=over 4 - -=item B<-text> - -prints out the certificate in text form. Full details are output including the -public key, signature algorithms, issuer and subject names, serial number -any extensions present and any trust settings. - -=item B<-noout> - -this option prevents output of the encoded version of the request. - -=item B<-modulus> - -this option prints out the value of the modulus of the public key -contained in the certificate. - -=item B<-serial> - -outputs the certificate serial number. - -=item B<-hash> - -outputs the "hash" of the certificate subject name. This is used in OpenSSL to -form an index to allow certificates in a directory to be looked up by subject -name. - -=item B<-subject> - -outputs the subject name. - -=item B<-issuer> - -outputs the issuer name. - -=item B<-nameopt option> - -option which determine how the subject or issuer names are displayed. This -option may be used more than once to set multiple options. See the B<NAME -OPTIONS> section for more information. - -=item B<-email> - -outputs the email address(es) if any. - -=item B<-startdate> - -prints out the start date of the certificate, that is the notBefore date. - -=item B<-enddate> - -prints out the expiry date of the certificate, that is the notAfter date. - -=item B<-dates> - -prints out the start and expiry dates of a certificate. - -=item B<-fingerprint> - -prints out the digest of the DER encoded version of the whole certificate. - -=item B<-C> - -this outputs the certificate in the form of a C source file. - -=back - -=head1 TRUST SETTINGS - -Please note these options are currently experimental and may well change. - -A B<trusted certificate> is an ordinary certificate which has several -additional pieces of information attached to it such as the permitted -and prohibited uses of the certificate and an "alias". - -Normally when a certificate is being verified at least one certificate -must be "trusted". By default a trusted certificate must be stored -locally and must be a root CA: any certificate chain ending in this CA -is then usable for any purpose. - -Trust settings currently are only used with a root CA. They allow a finer -control over the purposes the root CA can be used for. For example a CA -may be trusted for SSL client but not SSL server use. - -See the description of the B<verify> utility for more information on the -meaning of trust settings. - -Future versions of OpenSSL will recognize trust settings on any -certificate: not just root CAs. - - -=over 4 - -=item B<-trustout> - -this causes B<x509> to output a B<trusted> certificate. An ordinary -or trusted certificate can be input but by default an ordinary -certificate is output and any trust settings are discarded. With the -B<-trustout> option a trusted certificate is output. A trusted -certificate is automatically output if any trust settings are modified. - -=item B<-setalias arg> - -sets the alias of the certificate. This will allow the certificate -to be referred to using a nickname for example "Steve's Certificate". - -=item B<-alias> - -outputs the certificate alias, if any. - -=item B<-clrtrust> - -clears all the permitted or trusted uses of the certificate. - -=item B<-clrreject> - -clears all the prohibited or rejected uses of the certificate. - -=item B<-addtrust arg> - -adds a trusted certificate use. Any object name can be used here -but currently only B<clientAuth> (SSL client use), B<serverAuth> -(SSL server use) and B<emailProtection> (S/MIME email) are used. -Other OpenSSL applications may define additional uses. - -=item B<-addreject arg> - -adds a prohibited use. It accepts the same values as the B<-addtrust> -option. - -=item B<-purpose> - -this option performs tests on the certificate extensions and outputs -the results. For a more complete description see the B<CERTIFICATE -EXTENSIONS> section. - -=back - -=head1 SIGNING OPTIONS - -The B<x509> utility can be used to sign certificates and requests: it -can thus behave like a "mini CA". - -=over 4 - -=item B<-signkey filename> - -this option causes the input file to be self signed using the supplied -private key. - -If the input file is a certificate it sets the issuer name to the -subject name (i.e. makes it self signed) changes the public key to the -supplied value and changes the start and end dates. The start date is -set to the current time and the end date is set to a value determined -by the B<-days> option. Any certificate extensions are retained unless -the B<-clrext> option is supplied. - -If the input is a certificate request then a self signed certificate -is created using the supplied private key using the subject name in -the request. - -=item B<-clrext> - -delete any extensions from a certificate. This option is used when a -certificate is being created from another certificate (for example with -the B<-signkey> or the B<-CA> options). Normally all extensions are -retained. - -=item B<-keyform PEM|DER> - -specifies the format (DER or PEM) of the private key file used in the -B<-signkey> option. - -=item B<-days arg> - -specifies the number of days to make a certificate valid for. The default -is 30 days. - -=item B<-x509toreq> - -converts a certificate into a certificate request. The B<-signkey> option -is used to pass the required private key. - -=item B<-req> - -by default a certificate is expected on input. With this option a -certificate request is expected instead. - -=item B<-CA filename> - -specifies the CA certificate to be used for signing. When this option is -present B<x509> behaves like a "mini CA". The input file is signed by this -CA using this option: that is its issuer name is set to the subject name -of the CA and it is digitally signed using the CAs private key. - -This option is normally combined with the B<-req> option. Without the -B<-req> option the input is a certificate which must be self signed. - -=item B<-CAkey filename> - -sets the CA private key to sign a certificate with. If this option is -not specified then it is assumed that the CA private key is present in -the CA certificate file. - -=item B<-CAserial filename> - -sets the CA serial number file to use. - -When the B<-CA> option is used to sign a certificate it uses a serial -number specified in a file. This file consist of one line containing -an even number of hex digits with the serial number to use. After each -use the serial number is incremented and written out to the file again. - -The default filename consists of the CA certificate file base name with -".srl" appended. For example if the CA certificate file is called -"mycacert.pem" it expects to find a serial number file called "mycacert.srl". - -=item B<-CAcreateserial filename> - -with this option the CA serial number file is created if it does not exist: -it will contain the serial number "02" and the certificate being signed will -have the 1 as its serial number. Normally if the B<-CA> option is specified -and the serial number file does not exist it is an error. - -=item B<-extfile filename> - -file containing certificate extensions to use. If not specified then -no extensions are added to the certificate. - -=item B<-extensions section> - -the section to add certificate extensions from. If this option is not -specified then the extensions should either be contained in the unnamed -(default) section or the default section should contain a variable called -"extensions" which contains the section to use. - -=back - -=head1 NAME OPTIONS - -The B<nameopt> command line switch determines how the subject and issuer -names are displayed. If no B<nameopt> switch is present the default "oneline" -format is used which is compatible with previous versions of OpenSSL. -Each option is described in detail below, all options can be preceded by -a B<-> to turn the option off. Only the first four will normally be used. - -=over 4 - -=item B<compat> - -use the old format. This is equivalent to specifying no name options at all. - -=item B<RFC2253> - -displays names compatible with RFC2253 equivalent to B<esc_2253>, B<esc_ctrl>, -B<esc_msb>, B<utf8>, B<dump_nostr>, B<dump_unknown>, B<dump_der>, -B<sep_comma_plus>, B<dn_rev> and B<sname>. - -=item B<oneline> - -a oneline format which is more readable than RFC2253. It is equivalent to -specifying the B<esc_2253>, B<esc_ctrl>, B<esc_msb>, B<utf8>, B<dump_nostr>, -B<dump_der>, B<use_quote>, B<sep_comma_plus_spc>, B<spc_eq> and B<sname> -options. - -=item B<multiline> - -a multiline format. It is equivalent B<esc_ctrl>, B<esc_msb>, B<sep_multiline>, -B<spc_eq> and B<lname>. - -=item B<esc_2253> - -escape the "special" characters required by RFC2253 in a field That is -B<,+"E<lt>E<gt>;>. Additionally B<#> is escaped at the beginnging of a string -and a space character at the beginning or end of a string. - -=item B<esc_ctrl> - -escape control characters. That is those with ASCII values less than -0x20 (space) and the delete (0x7f) character. They are escaped using the -RFC2253 \XX notation (where XX are two hex digits representing the -character value). - -=item B<esc_msb> - -escape characters with the MSB set, that is with ASCII values larger than -127. - -=item B<use_quote> - -escapes some characters by surrounding the whole string with B<"> characters, -without the option all escaping is done with the B<\> character. - -=item B<utf8> - -convert all strings to UTF8 format first. This is required by RFC2253. If -you are lucky enough to have a UTF8 compatible terminal then the use -of this option (and B<not> setting B<esc_msb>) may result in the correct -display of multibyte (international) characters. Is this option is not -present then multibyte characters larger than 0xff will be represented -using the format \UXXXX for 16 bits and \WXXXXXXXX for 32 bits. -Also if this option is off any UTF8Strings will be converted to their -character form first. - -=item B<no_type> - -this option does not attempt to interpret multibyte characters in any -way. That is their content octets are merely dumped as though one octet -represents each character. This is useful for diagnostic purposes but -will result in rather odd looking output. - -=item B<show_type> - -show the type of the ASN1 character string. The type precedes the -field contents. For example "BMPSTRING: Hello World". - -=item B<dump_der> - -when this option is set any fields that need to be hexdumped will -be dumped using the DER encoding of the field. Otherwise just the -content octets will be displayed. Both options use the RFC2253 -B<#XXXX...> format. - -=item B<dump_nostr> - -dump non character string types (for example OCTET STRING) if this -option is not set then non character string types will be displayed -as though each content octet repesents a single character. - -=item B<dump_all> - -dump all fields. This option when used with B<dump_der> allows the -DER encoding of the structure to be unambiguously determined. - -=item B<dump_unknown> - -dump any field whose OID is not recognised by OpenSSL. - -=item B<sep_comma_plus>, B<sep_comma_plus_space>, B<sep_semi_plus_space>, -B<sep_multiline> - -these options determine the field separators. The first character is -between RDNs and the second between multiple AVAs (multiple AVAs are -very rare and their use is discouraged). The options ending in -"space" additionally place a space after the separator to make it -more readable. The B<sep_multiline> uses a linefeed character for -the RDN separator and a spaced B<+> for the AVA separator. It also -indents the fields by four characters. - -=item B<dn_rev> - -reverse the fields of the DN. This is required by RFC2253. As a side -effect this also reverses the order of multiple AVAs but this is -permissible. - -=item B<nofname>, B<sname>, B<lname>, B<oid> - -these options alter how the field name is displayed. B<nofname> does -not display the field at all. B<sname> uses the "short name" form -(CN for commonName for example). B<lname> uses the long form. -B<oid> represents the OID in numerical form and is useful for -diagnostic purpose. - -=item B<spc_eq> - -places spaces round the B<=> character which follows the field -name. - -=back - -=head1 EXAMPLES - -Note: in these examples the '\' means the example should be all on one -line. - -Display the contents of a certificate: - - openssl x509 -in cert.pem -noout -text - -Display the certificate serial number: - - openssl x509 -in cert.pem -noout -serial - -Display the certificate subject name: - - openssl x509 -in cert.pem -noout -subject - -Display the certificate subject name in RFC2253 form: - - openssl x509 -in cert.pem -noout -subject -nameopt RFC2253 - -Display the certificate subject name in oneline form on a terminal -supporting UTF8: - - openssl x509 -in cert.pem -noout -subject -nameopt oneline -nameopt -escmsb - -Display the certificate MD5 fingerprint: - - openssl x509 -in cert.pem -noout -fingerprint - -Display the certificate SHA1 fingerprint: - - openssl x509 -sha1 -in cert.pem -noout -fingerprint - -Convert a certificate from PEM to DER format: - - openssl x509 -in cert.pem -inform PEM -out cert.der -outform DER - -Convert a certificate to a certificate request: - - openssl x509 -x509toreq -in cert.pem -out req.pem -signkey key.pem - -Convert a certificate request into a self signed certificate using -extensions for a CA: - - openssl x509 -req -in careq.pem -extfile openssl.cnf -extensions v3_ca \ - -signkey key.pem -out cacert.pem - -Sign a certificate request using the CA certificate above and add user -certificate extensions: - - openssl x509 -req -in req.pem -extfile openssl.cnf -extensions v3_usr \ - -CA cacert.pem -CAkey key.pem -CAcreateserial - - -Set a certificate to be trusted for SSL client use and change set its alias to -"Steve's Class 1 CA" - - openssl x509 -in cert.pem -addtrust sslclient \ - -alias "Steve's Class 1 CA" -out trust.pem - -=head1 NOTES - -The PEM format uses the header and footer lines: - - -----BEGIN CERTIFICATE---- - -----END CERTIFICATE---- - -it will also handle files containing: - - -----BEGIN X509 CERTIFICATE---- - -----END X509 CERTIFICATE---- - -Trusted certificates have the lines - - -----BEGIN TRUSTED CERTIFICATE---- - -----END TRUSTED CERTIFICATE---- - -The conversion to UTF8 format used with the name options assumes that -T61Strings use the ISO8859-1 character set. This is wrong but Netscape -and MSIE do this as do many certificates. So although this is incorrect -it is more likely to display the majority of certificates correctly. - -The B<-fingerprint> option takes the digest of the DER encoded certificate. -This is commonly called a "fingerprint". Because of the nature of message -digests the fingerprint of a certificate is unique to that certificate and -two certificates with the same fingerprint can be considered to be the same. - -The Netscape fingerprint uses MD5 whereas MSIE uses SHA1. - -The B<-email> option searches the subject name and the subject alternative -name extension. Only unique email addresses will be printed out: it will -not print the same address more than once. - -=head1 CERTIFICATE EXTENSIONS - -The B<-purpose> option checks the certificate extensions and determines -what the certificate can be used for. The actual checks done are rather -complex and include various hacks and workarounds to handle broken -certificates and software. - -The same code is used when verifying untrusted certificates in chains -so this section is useful if a chain is rejected by the verify code. - -The basicConstraints extension CA flag is used to determine whether the -certificate can be used as a CA. If the CA flag is true then it is a CA, -if the CA flag is false then it is not a CA. B<All> CAs should have the -CA flag set to true. - -If the basicConstraints extension is absent then the certificate is -considered to be a "possible CA" other extensions are checked according -to the intended use of the certificate. A warning is given in this case -because the certificate should really not be regarded as a CA: however -it is allowed to be a CA to work around some broken software. - -If the certificate is a V1 certificate (and thus has no extensions) and -it is self signed it is also assumed to be a CA but a warning is again -given: this is to work around the problem of Verisign roots which are V1 -self signed certificates. - -If the keyUsage extension is present then additional restraints are -made on the uses of the certificate. A CA certificate B<must> have the -keyCertSign bit set if the keyUsage extension is present. - -The extended key usage extension places additional restrictions on the -certificate uses. If this extension is present (whether critical or not) -the key can only be used for the purposes specified. - -A complete description of each test is given below. The comments about -basicConstraints and keyUsage and V1 certificates above apply to B<all> -CA certificates. - - -=over 4 - -=item B<SSL Client> - -The extended key usage extension must be absent or include the "web client -authentication" OID. keyUsage must be absent or it must have the -digitalSignature bit set. Netscape certificate type must be absent or it must -have the SSL client bit set. - -=item B<SSL Client CA> - -The extended key usage extension must be absent or include the "web client -authentication" OID. Netscape certificate type must be absent or it must have -the SSL CA bit set: this is used as a work around if the basicConstraints -extension is absent. - -=item B<SSL Server> - -The extended key usage extension must be absent or include the "web server -authentication" and/or one of the SGC OIDs. keyUsage must be absent or it -must have the digitalSignature, the keyEncipherment set or both bits set. -Netscape certificate type must be absent or have the SSL server bit set. - -=item B<SSL Server CA> - -The extended key usage extension must be absent or include the "web server -authentication" and/or one of the SGC OIDs. Netscape certificate type must -be absent or the SSL CA bit must be set: this is used as a work around if the -basicConstraints extension is absent. - -=item B<Netscape SSL Server> - -For Netscape SSL clients to connect to an SSL server it must have the -keyEncipherment bit set if the keyUsage extension is present. This isn't -always valid because some cipher suites use the key for digital signing. -Otherwise it is the same as a normal SSL server. - -=item B<Common S/MIME Client Tests> - -The extended key usage extension must be absent or include the "email -protection" OID. Netscape certificate type must be absent or should have the -S/MIME bit set. If the S/MIME bit is not set in netscape certificate type -then the SSL client bit is tolerated as an alternative but a warning is shown: -this is because some Verisign certificates don't set the S/MIME bit. - -=item B<S/MIME Signing> - -In addition to the common S/MIME client tests the digitalSignature bit must -be set if the keyUsage extension is present. - -=item B<S/MIME Encryption> - -In addition to the common S/MIME tests the keyEncipherment bit must be set -if the keyUsage extension is present. - -=item B<S/MIME CA> - -The extended key usage extension must be absent or include the "email -protection" OID. Netscape certificate type must be absent or must have the -S/MIME CA bit set: this is used as a work around if the basicConstraints -extension is absent. - -=item B<CRL Signing> - -The keyUsage extension must be absent or it must have the CRL signing bit -set. - -=item B<CRL Signing CA> - -The normal CA tests apply. Except in this case the basicConstraints extension -must be present. - -=back - -=head1 BUGS - -Extensions in certificates are not transferred to certificate requests and -vice versa. - -It is possible to produce invalid certificates or requests by specifying the -wrong private key or using inconsistent options in some cases: these should -be checked. - -There should be options to explicitly set such things as start and end -dates rather than an offset from the current time. - -The code to implement the verify behaviour described in the B<TRUST SETTINGS> -is currently being developed. It thus describes the intended behaviour rather -than the current behaviour. It is hoped that it will represent reality in -OpenSSL 0.9.5 and later. - -=head1 SEE ALSO - -L<req(1)|req(1)>, L<ca(1)|ca(1)>, L<genrsa(1)|genrsa(1)>, -L<gendsa(1)|gendsa(1)>, L<verify(1)|verify(1)> - -=cut |