aboutsummaryrefslogtreecommitdiff
path: root/crypto/openssl/config
diff options
context:
space:
mode:
Diffstat (limited to 'crypto/openssl/config')
-rwxr-xr-xcrypto/openssl/config717
1 files changed, 0 insertions, 717 deletions
diff --git a/crypto/openssl/config b/crypto/openssl/config
deleted file mode 100755
index 4f7b41877fec..000000000000
--- a/crypto/openssl/config
+++ /dev/null
@@ -1,717 +0,0 @@
-#!/bin/sh
-#
-# OpenSSL config: determine the operating system and run ./Configure
-#
-# "config -h" for usage information.
-#
-# this is a merge of minarch and GuessOS from the Apache Group.
-# Originally written by Tim Hudson <tjh@cryptsoft.com>.
-
-# Original Apache Group comments on GuessOS
-
-# Simple OS/Platform guesser. Similar to config.guess but
-# much, much smaller. Since it was developed for use with
-# Apache, it follows under Apache's regular licensing
-# with one specific addition: Any changes or additions
-# to this script should be Emailed to the Apache
-# group (apache@apache.org) in general and to
-# Jim Jagielski (jim@jaguNET.com) in specific.
-#
-# Be as similar to the output of config.guess/config.sub
-# as possible.
-
-# First get uname entries that we use below
-
-MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown"
-RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown"
-SYSTEM=`(uname -s) 2>/dev/null` || SYSTEM="unknown"
-VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown"
-
-
-# Now test for ISC and SCO, since it is has a braindamaged uname.
-#
-# We need to work around FreeBSD 1.1.5.1
-(
-XREL=`uname -X 2>/dev/null | grep "^Release" | awk '{print $3}'`
-if [ "x$XREL" != "x" ]; then
- if [ -f /etc/kconfig ]; then
- case "$XREL" in
- 4.0|4.1)
- echo "${MACHINE}-whatever-isc4"; exit 0
- ;;
- esac
- else
- case "$XREL" in
- 3.2v4.2)
- echo "whatever-whatever-sco3"; exit 0
- ;;
- 3.2v5.0*)
- echo "whatever-whatever-sco5"; exit 0
- ;;
- 4.2MP)
- if [ "x$VERSION" = "x2.01" ]; then
- echo "${MACHINE}-whatever-unixware201"; exit 0
- elif [ "x$VERSION" = "x2.02" ]; then
- echo "${MACHINE}-whatever-unixware202"; exit 0
- elif [ "x$VERSION" = "x2.03" ]; then
- echo "${MACHINE}-whatever-unixware203"; exit 0
- elif [ "x$VERSION" = "x2.1.1" ]; then
- echo "${MACHINE}-whatever-unixware211"; exit 0
- elif [ "x$VERSION" = "x2.1.2" ]; then
- echo "${MACHINE}-whatever-unixware212"; exit 0
- elif [ "x$VERSION" = "x2.1.3" ]; then
- echo "${MACHINE}-whatever-unixware213"; exit 0
- else
- echo "${MACHINE}-whatever-unixware2"; exit 0
- fi
- ;;
- 4.2)
- echo "whatever-whatever-unixware1"; exit 0
- ;;
- OpenUNIX)
- if [ "`echo x$VERSION | sed -e 's/\..*//'`" = "x8" ]; then
- echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0
- fi
- ;;
- 5)
- if [ "`echo x$VERSION | sed -e 's/\..*//'`" = "x7" ]; then
- echo "${MACHINE}-sco-unixware7"; exit 0
- fi
- ;;
- esac
- fi
-fi
-# Now we simply scan though... In most cases, the SYSTEM info is enough
-#
-case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
- MPE/iX:*)
- MACHINE=`echo "$MACHINE" | sed -e 's/-/_/g'`
- echo "parisc-hp-MPE/iX"; exit 0
- ;;
- A/UX:*)
- echo "m68k-apple-aux3"; exit 0
- ;;
-
- AIX:[3456789]:4:*)
- echo "${MACHINE}-ibm-aix43"; exit 0
- ;;
-
- AIX:*:[56789]:*)
- echo "${MACHINE}-ibm-aix43"; exit 0
- ;;
-
- AIX:*)
- echo "${MACHINE}-ibm-aix"; exit 0
- ;;
-
- dgux:*)
- echo "${MACHINE}-dg-dgux"; exit 0
- ;;
-
- HI-UX:*)
- echo "${MACHINE}-hi-hiux"; exit 0
- ;;
-
- HP-UX:*)
- HPUXVER=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- case "$HPUXVER" in
- 11.*)
- echo "${MACHINE}-hp-hpux11"; exit 0
- ;;
- 10.*)
- echo "${MACHINE}-hp-hpux10"; exit 0
- ;;
- *)
- echo "${MACHINE}-hp-hpux"; exit 0
- ;;
- esac
- ;;
-
- IRIX:5.*)
- echo "mips2-sgi-irix"; exit 0
- ;;
-
- IRIX:6.*)
- echo "mips3-sgi-irix"; exit 0
- ;;
-
- IRIX64:*)
- echo "mips4-sgi-irix64"; exit 0
- ;;
-
- Linux:[2-9].*)
- echo "${MACHINE}-whatever-linux2"; exit 0
- ;;
-
- Linux:1.*)
- echo "${MACHINE}-whatever-linux1"; exit 0
- ;;
-
- LynxOS:*)
- echo "${MACHINE}-lynx-lynxos"; exit 0
- ;;
-
- BSD/OS:4.*) # BSD/OS always says 386
- echo "i486-whatever-bsdi4"; exit 0
- ;;
-
- BSD/386:*:*:*486*|BSD/OS:*:*:*:*486*)
- case `/sbin/sysctl -n hw.model` in
- Pentium*)
- echo "i586-whatever-bsdi"; exit 0
- ;;
- *)
- echo "i386-whatever-bsdi"; exit 0
- ;;
- esac;
- ;;
-
- BSD/386:*|BSD/OS:*)
- echo "${MACHINE}-whatever-bsdi"; exit 0
- ;;
-
- FreeBSD:*)
- VERS=`echo ${RELEASE} | sed -e 's/[-(].*//'`
- MACH=`sysctl -n hw.model`
- ARCH='whatever'
- case ${MACH} in
- *386* ) MACH="i386" ;;
- *486* ) MACH="i486" ;;
- Pentium\ II*) MACH="i686" ;;
- Pentium* ) MACH="i586" ;;
- Alpha* ) MACH="alpha" ;;
- * ) MACH="$MACHINE" ;;
- esac
- case ${MACH} in
- i[0-9]86 ) ARCH="pc" ;;
- esac
- echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0
- ;;
-
- NetBSD:*:*:*386*)
- echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0
- ;;
-
- NetBSD:*)
- echo "${MACHINE}-whatever-netbsd"; exit 0
- ;;
-
- OpenBSD:*)
- echo "${MACHINE}-whatever-openbsd"; exit 0
- ;;
-
- OpenUNIX:*)
- echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0
- ;;
-
- OSF1:*:*:*alpha*)
- OSFMAJOR=`echo ${RELEASE}| sed -e 's/^V\([0-9]*\)\..*$/\1/'`
- case "$OSFMAJOR" in
- 4|5)
- echo "${MACHINE}-dec-tru64"; exit 0
- ;;
- 1|2|3)
- echo "${MACHINE}-dec-osf"; exit 0
- ;;
- *)
- echo "${MACHINE}-dec-osf"; exit 0
- ;;
- esac
- ;;
-
- QNX:*)
- case "$RELEASE" in
- 4*)
- echo "${MACHINE}-whatever-qnx4"
- ;;
- 6*)
- echo "${MACHINE}-whatever-qnx6"
- ;;
- *)
- echo "${MACHINE}-whatever-qnx"
- ;;
- esac
- exit 0
- ;;
-
- Paragon*:*:*:*)
- echo "i860-intel-osf1"; exit 0
- ;;
-
- Rhapsody:*)
- echo "ppc-apple-rhapsody"; exit 0
- ;;
-
- Darwin:*)
- echo "ppc-apple-darwin"; exit 0
- ;;
-
- SunOS:5.*)
- echo "${MACHINE}-whatever-solaris2"; exit 0
- ;;
-
- SunOS:*)
- echo "${MACHINE}-sun-sunos4"; exit 0
- ;;
-
- UNIX_System_V:4.*:*)
- echo "${MACHINE}-whatever-sysv4"; exit 0
- ;;
-
- *:4*:R4*:m88k)
- echo "${MACHINE}-whatever-sysv4"; exit 0
- ;;
-
- DYNIX/ptx:4*:*)
- echo "${MACHINE}-whatever-sysv4"; exit 0
- ;;
-
- *:4.0:3.0:3[34]?? | *:4.0:3.0:3[34]??,*)
- echo "i486-ncr-sysv4"; exit 0
- ;;
-
- ULTRIX:*)
- echo "${MACHINE}-unknown-ultrix"; exit 0
- ;;
-
- SINIX*|ReliantUNIX*)
- echo "${MACHINE}-siemens-sysv4"; exit 0
- ;;
-
- POSIX-BC*)
- echo "${MACHINE}-siemens-sysv4"; exit 0 # Here, $MACHINE == "BS2000"
- ;;
-
- machten:*)
- echo "${MACHINE}-tenon-${SYSTEM}"; exit 0;
- ;;
-
- library:*)
- echo "${MACHINE}-ncr-sysv4"; exit 0
- ;;
-
- ConvexOS:*:11.0:*)
- echo "${MACHINE}-v11-${SYSTEM}"; exit 0;
- ;;
-
- NEWS-OS:4.*)
- echo "mips-sony-newsos4"; exit 0;
- ;;
-
- CYGWIN*)
- case "$RELEASE" in
- [bB]*|1.0|1.[12].*)
- echo "${MACHINE}-whatever-cygwin_pre1.3"
- ;;
- *)
- echo "${MACHINE}-whatever-cygwin"
- ;;
- esac
- exit 0
- ;;
-
- *"CRAY T3E")
- echo "t3e-cray-unicosmk"; exit 0;
- ;;
-
- *CRAY*)
- echo "j90-cray-unicos"; exit 0;
- ;;
-esac
-
-#
-# Ugg. These are all we can determine by what we know about
-# the output of uname. Be more creative:
-#
-
-# Do the Apollo stuff first. Here, we just simply assume
-# that the existance of the /usr/apollo directory is proof
-# enough
-if [ -d /usr/apollo ]; then
- echo "whatever-apollo-whatever"
- exit 0
-fi
-
-# Now NeXT
-ISNEXT=`hostinfo 2>/dev/null`
-case "$ISNEXT" in
- *'NeXT Mach 3.3'*)
- echo "whatever-next-nextstep3.3"; exit 0
- ;;
- *NeXT*)
- echo "whatever-next-nextstep"; exit 0
- ;;
-esac
-
-# At this point we gone through all the one's
-# we know of: Punt
-
-echo "${MACHINE}-whatever-${SYSTEM}"
-exit 0
-) 2>/dev/null | (
-
-# ---------------------------------------------------------------------------
-# this is where the translation occurs into SSLeay terms
-# ---------------------------------------------------------------------------
-
-PREFIX=""
-SUFFIX=""
-TEST="false"
-
-# pick up any command line args to config
-for i
-do
-case "$i" in
--d*) PREFIX="debug-";;
--t*) TEST="true";;
--h*) TEST="true"; cat <<EOF
-Usage: config [options]
- -d Add a debug- prefix to machine choice.
- -t Test mode, do not run the Configure perl script.
- -h This help.
-
-Any other text will be passed to the Configure perl script.
-See INSTALL for instructions.
-
-EOF
-;;
-*) options=$options" $i" ;;
-esac
-done
-
-# figure out if gcc is available and if so we use it otherwise
-# we fallback to whatever cc does on the system
-GCCVER=`(gcc -dumpversion) 2>/dev/null`
-if [ "$GCCVER" != "" ]; then
- CC=gcc
- # Since gcc 3.1 gcc --version behaviour has changed. gcc -dumpversion
- # does give us what we want though, so we use that. We just just the
- # major and minor version numbers.
- # peak single digit before and after first dot, e.g. 2.95.1 gives 29
- GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
-else
- CC=cc
-fi
-if [ "$SYSTEM" = "HP-UX" ];then
- # By default gcc is a ILP32 compiler (with long long == 64).
- GCC_BITS="32"
- if [ $GCCVER -ge 30 ]; then
- # PA64 support only came in with gcc 3.0.x.
- # We look for the preprocessor symbol __LP64__ indicating
- # 64bit bit long and pointer. sizeof(int) == 32 on HPUX64.
- if gcc -v -E -x c /dev/null 2>&1 | grep __LP64__ > /dev/null; then
- GCC_BITS="64"
- fi
- fi
-fi
-if [ "$SYSTEM" = "SunOS" ]; then
- # check for WorkShop C, expected output is "cc: blah-blah C x.x"
- CCVER=`(cc -V 2>&1) 2>/dev/null | \
- egrep -e '^cc: .* C [0-9]\.[0-9]' | \
- sed 's/.* C \([0-9]\)\.\([0-9]\).*/\1\2/'`
- CCVER=${CCVER:-0}
- if [ $CCVER -gt 40 ]; then
- CC=cc # overrides gcc!!!
- if [ $CCVER -eq 50 ]; then
- echo "WARNING! Detected WorkShop C 5.0. Do make sure you have"
- echo " patch #107357-01 or later applied."
- sleep 5
- fi
- elif [ "$CC" = "cc" -a $CCVER -gt 0 ]; then
- CC=sc3
- fi
-fi
-
-if [ "${SYSTEM}-${MACHINE}" = "Linux-alpha" ]; then
- # check for Compaq C, expected output is "blah-blah C Vx.x"
- CCCVER=`(ccc -V 2>&1) 2>/dev/null | \
- egrep -e '.* C V[0-9]\.[0-9]' | \
- sed 's/.* C V\([0-9]\)\.\([0-9]\).*/\1\2/'`
- CCCVER=${CCCVER:-0}
- if [ $CCCVER -gt 60 ]; then
- CC=ccc # overrides gcc!!! well, ccc outperforms inoticeably
- # only on hash routines and des, otherwise gcc (2.95)
- # keeps along rather tight...
- fi
-fi
-
-GCCVER=${GCCVER:-0}
-CCVER=${CCVER:-0}
-
-# read the output of the embedded GuessOS
-read GUESSOS
-
-echo Operating system: $GUESSOS
-
-# now map the output into SSLeay terms ... really should hack into the
-# script above so we end up with values in vars but that would take
-# more time that I want to waste at the moment
-case "$GUESSOS" in
- mips2-sgi-irix)
- CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
- CPU=${CPU:-0}
- if [ $CPU -ge 4000 ]; then
- options="$options -mips2"
- fi
- OUT="irix-$CC"
- ;;
- mips3-sgi-irix)
- CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
- CPU=${CPU:-0}
- if [ $CPU -ge 5000 ]; then
- options="$options -mips4"
- else
- options="$options -mips3"
- fi
- OUT="irix-mips3-$CC"
- ;;
- mips4-sgi-irix64)
- echo "WARNING! If you wish to build 64-bit library, then you have to"
- echo " invoke './Configure irix64-mips4-$CC' *manually*."
- echo " Type return if you want to continue, Ctrl-C to abort."
- read waste < /dev/tty
- CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
- CPU=${CPU:-0}
- if [ $CPU -ge 5000 ]; then
- options="$options -mips4"
- else
- options="$options -mips3"
- fi
- OUT="irix-mips3-$CC"
- ;;
- alpha-*-linux2)
- ISA=`awk '/cpu model/{print$4}' /proc/cpuinfo`
- case ${ISA:-generic} in
- *[67]) OUT="linux-alpha+bwx-$CC" ;;
- *) OUT="linux-alpha-$CC" ;;
- esac
- if [ "$CC" = "gcc" ]; then
- case ${ISA:-generic} in
- EV5|EV45) options="$options -mcpu=ev5";;
- EV56|PCA56) options="$options -mcpu=ev56";;
- EV6|EV67|PCA57) options="$options -mcpu=ev6";;
- esac
- fi
- ;;
- mips-*-linux?)
- cat >dummy.c <<EOF
-#include <stdio.h> /* for printf() prototype */
- int main (argc, argv) int argc; char *argv[]; {
-#ifdef __MIPSEB__
- printf ("linux-%s\n", argv[1]);
-#endif
-#ifdef __MIPSEL__
- printf ("linux-%sel\n", argv[1]);
-#endif
- return 0;
-}
-EOF
- ${CC} -o dummy dummy.c && OUT=`./dummy ${MACHINE}`
- rm dummy dummy.c
- ;;
- ppc64-*-linux2)
- #Use the standard target for PPC architecture until we create a
- #special one for the 64bit architecture.
- OUT="linux-ppc" ;;
- ppc-*-linux2) OUT="linux-ppc" ;;
- m68k-*-linux*) OUT="linux-m68k" ;;
- ia64-*-linux?) OUT="linux-ia64" ;;
- ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;;
- ppc-apple-darwin) OUT="darwin-ppc-cc" ;;
- sparc64-*-linux2)
- #Before we can uncomment following lines we have to wait at least
- #till 64-bit glibc for SPARC is operational:-(
- #echo "WARNING! If you wish to build 64-bit library, then you have to"
- #echo " invoke './Configure linux64-sparcv9' *manually*."
- #echo " Type return if you want to continue, Ctrl-C to abort."
- #read waste < /dev/tty
- OUT="linux-sparcv9" ;;
- sparc-*-linux2)
- KARCH=`awk '/^type/{print$3}' /proc/cpuinfo`
- case ${KARCH:-sun4} in
- sun4u*) OUT="linux-sparcv9" ;;
- sun4m) OUT="linux-sparcv8" ;;
- sun4d) OUT="linux-sparcv8" ;;
- *) OUT="linux-sparcv7" ;;
- esac ;;
- parisc-*-linux2)
- CPUARCH=`awk '/cpu family/{print substr($5,1,3)}' /proc/cpuinfo`
- CPUSCHEDULE=`awk '/^cpu.[ ]: PA/{print substr($3,3)}' /proc/cpuinfo`
-
- # ??TODO ?? Model transformations
- # 0. CPU Architecture for the 1.1 processor has letter suffixes. We strip that off
- # assuming no further arch. identification will ever be used by GCC.
- # 1. I'm most concerned about whether is a 7300LC is closer to a 7100 versus a 7100LC.
- # 2. The variant 64-bit processors cause concern should GCC support explicit schedulers
- # for these chips in the future.
- # PA7300LC -> 7100LC (1.1)
- # PA8200 -> 8000 (2.0)
- # PA8500 -> 8000 (2.0)
- # PA8600 -> 8000 (2.0)
-
- CPUSCHEDULE=`echo $CPUSCHEDULE|sed -e 's/7300LC/7100LC/' -e 's/8?00/8000/'`
- # Finish Model transformations
-
- options="$options -mschedule=$CPUSCHEDULE -march=$CPUARCH"
- OUT="linux-parisc" ;;
- arm*-*-linux2) OUT="linux-elf-arm" ;;
- s390-*-linux2) OUT="linux-s390" ;;
- s390x-*-linux?) OUT="linux-s390x" ;;
- *-*-linux2) OUT="linux-elf" ;;
- *-*-linux1) OUT="linux-aout" ;;
- sun4u*-*-solaris2)
- ISA64=`(isalist) 2>/dev/null | grep sparcv9`
- if [ "$ISA64" != "" -a "$CC" = "cc" -a $CCVER -ge 50 ]; then
- echo "WARNING! If you wish to build 64-bit library, then you have to"
- echo " invoke './Configure solaris64-sparcv9-cc' *manually*."
- echo " Type return if you want to continue, Ctrl-C to abort."
- read waste < /dev/tty
- fi
- OUT="solaris-sparcv9-$CC" ;;
- sun4m-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
- sun4d-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
- sun4*-*-solaris2) OUT="solaris-sparcv7-$CC" ;;
- *86*-*-solaris2) OUT="solaris-x86-$CC" ;;
- *-*-sunos4) OUT="sunos-$CC" ;;
- alpha*-*-freebsd*) OUT="FreeBSD-alpha" ;;
- *-freebsd[3-9]*) OUT="FreeBSD-elf" ;;
- *-freebsd[1-2]*) OUT="FreeBSD" ;;
- *86*-*-netbsd) OUT="NetBSD-x86" ;;
- sun3*-*-netbsd) OUT="NetBSD-m68" ;;
- *-*-netbsd) OUT="NetBSD-sparc" ;;
- *86*-*-openbsd) OUT="OpenBSD-x86" ;;
- alpha*-*-openbsd) OUT="OpenBSD-alpha" ;;
- pmax*-*-openbsd) OUT="OpenBSD-mips" ;;
- *-*-openbsd) OUT="OpenBSD" ;;
- *86*-*-bsdi4) OUT="bsdi-elf-gcc" ;;
- *-*-osf) OUT="alphaold-cc" ;;
- *-*-tru64) OUT="alpha-cc" ;;
- *-*-OpenUNIX*)
- if [ "$CC" = "gcc" ]; then
- OUT="OpenUNIX-8-gcc"
- else
- OUT="OpenUNIX-8"
- fi
- ;;
- *-*-unixware7) OUT="unixware-7" ;;
- *-*-UnixWare7) OUT="unixware-7" ;;
- *-*-Unixware7) OUT="unixware-7" ;;
- *-*-unixware20*) OUT="unixware-2.0" ;;
- *-*-unixware21*) OUT="unixware-2.1" ;;
- *-*-UnixWare20*) OUT="unixware-2.0" ;;
- *-*-UnixWare21*) OUT="unixware-2.1" ;;
- *-*-Unixware20*) OUT="unixware-2.0" ;;
- *-*-Unixware21*) OUT="unixware-2.1" ;;
- BS2000-siemens-sysv4) OUT="BS2000-OSD" ;;
- RM*-siemens-sysv4) OUT="ReliantUNIX" ;;
- *-siemens-sysv4) OUT="SINIX" ;;
- *-hpux1*)
- if [ $CC = "gcc" ];
- then
- if [ $GCC_BITS = "64" ]; then
- OUT="hpux64-parisc-gcc"
- else
- OUT="hpux-parisc-gcc"
- fi
- else
- OUT="hpux-parisc-$CC"
- fi
- options="$options -D_REENTRANT" ;;
- *-hpux) OUT="hpux-parisc-$CC" ;;
- # these are all covered by the catchall below
- # *-aix) OUT="aix-$CC" ;;
- # *-dgux) OUT="dgux" ;;
- mips-sony-newsos4) OUT="newsos4-gcc" ;;
- *-*-cygwin_pre1.3) OUT="Cygwin-pre1.3" ;;
- *-*-cygwin) OUT="Cygwin" ;;
- t3e-cray-unicosmk) OUT="cray-t3e" ;;
- j90-cray-unicos) OUT="cray-j90" ;;
- *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
-esac
-
-# See whether we can compile Atalla support
-if [ -f /usr/include/atasi.h ]
-then
- options="$options -DATALLA"
-fi
-
-# gcc < 2.8 does not support -mcpu=ultrasparc
-if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ]
-then
- echo "WARNING! Do consider upgrading to gcc-2.8 or later."
- sleep 5
- OUT=solaris-sparcv9-gcc27
-fi
-if [ "$OUT" = "linux-sparcv9" -a $GCCVER -lt 28 ]
-then
- echo "WARNING! Falling down to 'linux-sparcv8'."
- echo " Upgrade to gcc-2.8 or later."
- sleep 5
- OUT=linux-sparcv8
-fi
-
-case "$GUESSOS" in
- i386-*) options="$options 386" ;;
-esac
-
-for i in bf cast des dh dsa hmac idea md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa sha
-do
- if [ ! -d crypto/$i ]
- then
- options="$options no-$i"
- fi
-done
-
-if [ -z "$OUT" ]; then
- OUT="$CC"
-fi
-
-if [ ".$PERL" = . ] ; then
- for i in . `echo $PATH | sed 's/:/ /g'`; do
- if [ -f "$i/perl5" ] ; then
- PERL="$i/perl5"
- break;
- fi;
- done
-fi
-
-if [ ".$PERL" = . ] ; then
- for i in . `echo $PATH | sed 's/:/ /g'`; do
- if [ -f "$i/perl" ] ; then
- if "$i/perl" -e 'exit($]<5.0)'; then
- PERL="$i/perl"
- break;
- fi;
- fi;
- done
-fi
-
-if [ ".$PERL" = . ] ; then
- echo "You need Perl 5."
- exit 1
-fi
-
-# run Configure to check to see if we need to specify the
-# compiler for the platform ... in which case we add it on
-# the end ... otherwise we leave it off
-
-$PERL ./Configure LIST | grep "$OUT-$CC" > /dev/null
-if [ $? = "0" ]; then
- OUT="$OUT-$CC"
-fi
-
-OUT="$PREFIX$OUT"
-
-$PERL ./Configure LIST | grep "$OUT" > /dev/null
-if [ $? = "0" ]; then
- echo Configuring for $OUT
-
- if [ "$TEST" = "true" ]; then
- echo $PERL ./Configure $OUT $options
- else
- $PERL ./Configure $OUT $options
- fi
-else
- echo "This system ($OUT) is not supported. See file INSTALL for details."
-fi
-)
generated by cgit v1.2.3 (git 2.25.1) at 2025-04-12 22:40:50 +0000