diff options
Diffstat (limited to 'contrib/texinfo/ChangeLog')
| -rw-r--r-- | contrib/texinfo/ChangeLog | 2346 |
1 files changed, 0 insertions, 2346 deletions
diff --git a/contrib/texinfo/ChangeLog b/contrib/texinfo/ChangeLog deleted file mode 100644 index 06d0464a688f..000000000000 --- a/contrib/texinfo/ChangeLog +++ /dev/null @@ -1,2346 +0,0 @@ -Fri Oct 4 07:49:49 1996 Karl Berry <karl@cs.umb.edu> - - * Version 3.9. - - * Makefile.in (install): Say to install texinfo.tex manually. - - * util/texi2dvi, - * util/texindex.c, - * makeinfo/makeinfo.c, - * info/info.c: Include only the current year in the copyright message. - - * util/texi2dvi: Exit successfully. - From: Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>. - -Thu Oct 3 12:58:32 1996 Karl Berry <karl@cs.umb.edu> - - * Rename install.sh to the preferred install-sh. - - * Makefile.in (VERSION), - * util/texi2dvi, - * util/texindex.c, - * util/install-info.c, - * makeinfo/makeinfo.c (minor_version, print_version_info), - * info/info.c: Update version number. - - * util/texi2dvi: Only show diff if verbose. - - * util/install-info.c (main): Check for a missing dir file as well - as a missing info files. - (main): At start of a node, completely initialize the newly-malloced - node structure. - - * texinfo.texi: Fix incorrect uses of @key, - insert missing newline in Installing Dir Entries' @menu item, - document install-info invocation. - - * Makefile.in (DISTFILES): Do not put .gdbinit's in distribution. - (dist): Use || instead of && (and invert sense) so make doesn't think - the command failed. - (dist): Exclude more junk. - - * makeinfo/makeinfo.c (cm_xref): Back out patch from Tom T., since - we generate a good-enough error message that is suppressible - without it. - - * util/gen-dir-node: The recommended name for the top-level info - file is dir, not dir.info. - - * util/install-info.c (main): At `Mark the end of the Top node', - make sure the node name is non-NULL before comparing it. From - lvirden@cas.org. - - * configure.in (AC_REPLACE_FUNCS): Use this for memcpy, memmove, - and strdup. - (AC_CHECK_FUNCS): Instead of this. - Because both bcopy and memmove are missing on the 3b2, as reported by - Gaylen Miller <gaylen@proaxis.com>, hence we must provide our own. - * libtxi/Makefile.in (LIBOBJS): New variable. - (OBJS): Include it. - * libtxi/memcpy.c, libtxi/memmove.c, libtxi/strdup.c: New files, - taken from fileutils 3.13. - * makeinfo/makeinfo.c, - * info/clib.c (strdup): Move to libtxi. - -Wed Oct 2 18:23:30 1996 Karl Berry <karl@cs.umb.edu> - - * info/info-utils.h (memcpy) [!HAVE_MEMCPY], - * info/termdep.h (memcpy) [!HAVE_MEMCPY], - * makeinfo/makeinfo.c (memmove) [!HAVE_MEMMOVE]: Remove this - #ifdef, as we now include it in libtxi if missing. - -Tue Oct 1 17:41:52 1996 Karl Berry <karl@cs.umb.edu> - - * makeinfo/Makefile.in (install), - * info/Makefile.in (install), - * Makefile.in (install): Use new option name --info-dir instead of - --infodir. - - * makeinfo/multi.c (out_char): New fn. Replace all calls to - putc/fprintf with calls to this. - - * util/install-info.c: Rename --infodir to info-dir. - -Mon Sep 30 10:07:21 1996 Karl Berry <karl@cs.umb.edu> - - * Version 3.8. - - * texinfo.tex: Untabify. - - * texinfo.tex (\ptexl, \ptexL): Do not save, we have our own - commands now. - (\onepageout): Reformat for readability, and call \indexdummies - to avoid expansion of Texinfo commands (e.g., accents) in \write's. - (\,, \dotaccent, \ringaccent, \tieaccent, \ubaraccent, udotaccent, - \questiondown, \exclamdown, \dotless): New macros. - (\l): Let plain TeX definition remain, instead of switching - to ``lisp'' font. - (\multitable): Ensure space between the columns, - insert struts to make interline spacing constant, - use real strut instead of a box containing `Xy'. - (\indexdummies): Do not define \rm, \char, but - do define \@, \{, \}, \dotless, and \,. And \t should generate - \t, not \r. - (\indexnofonts): Define \, and \dotless as \indexdummyfont, - and let \@ be @. - (\doind): Reformat for readability, and use temp control sequence - names that actually make sense. - (\doublecolumnout, \pagesofar, \enddoublecolumns): Restore - Knuth's original code to avoid spurious overfull vbox messages. - (No boxes are actually overfull). - (\shortcontents): Do not allow hyphenations. - (\dochapentry, \tocentry): Make glue above and below flexible, to allow - better page breaks. - (\tex): Reset \, to its plain TeX meaning, - and do not reset \l. - - * COPYING: Update for new FSF address (from gcc dist). - - * libtxi/Makefile.in: Various simplifications. - -Sun Sep 29 12:58:44 1996 Karl Berry <karl@cs.umb.edu> - - * util/texi2dvi: Use $progname instead of $0 for --version. - - * util/install-info.c (xmalloc, xrealloc): Declare malloc and - realloc as returning void *, - to avoid ptr/int problems on Digital Unix. - - * info/tilde.c (tilde_expand_word): Declare getenv as returning char *, - to avoid warning on Digital Unix. - - * makeinfo/multi.c (multitable_active): Declare extern here to - avoid ld warning on rs6000. - - * util/texindex.c (usage): Avoid ??' trigraph. - - * util/install-info.c: Include <sys/fcntl.h> or <fnctl.h>, - according to HAVE_SYS_FCNTL_H, - and only include <sys/file.h> if HAVE_SYS_FILE_H. - (readlines): Oops, had NULL's and 0's reversed for ptr/int members. - - * info/terminal.c (terminal_goto_xy): Remove spurious extra ;. - - * util/install-info.c: Untabify. (input_sections): Initialize. - (find_lines): Initialize the terminating element of the array. - (print_help): Document --infodir. - (main): Compare the basename of infile sans .info to the dir entry, - not infile itself. - * util/Makefile.in (clean): Remove the install-info binary. - - * info/Makefile.in (distclean): Remove *.info* files. - - * Makefile.in (install), - * info/Makefile.in (install), - * makeinfo/Makefile.in (install): Use --infodir instead of --info-file. - - * info/info.c, - * makeinfo/makeinfo.c: Avoid newlines in string constants for the - sake of SunOS cc. - - * makeinfo/multi.c: Do not assume ANSI C. - - * info/info.texi: Oops, need @end vtable for a @vtable. - -Sat Sep 28 16:31:28 1996 Karl Berry <karl@cs.umb.edu> - - * Makefile.in (texinfo): Do not depend on sub-all, as then - makeinfo is always run. Instead, depend on texinfo.texi. - - * makeinfo/Makefile.in (info, dvi): New targets. - makeinfo.info, makeinfo.dvi: Do not depend on macro.texi for now. - - * info/Makefile.in (install): Must call install-info twice. - - * info/info-stnd.texi, - * info/info.texi, - * makeinfo/makeinfo.texi: Include direntry. - - * emacs/Makefile.in: Use && after cd, etc. - - * texinfo.texi: Kludges so makeinfo -E will not create spurious - differences. Add new direntries. - - * util/install-info.c, - * util/texindex.c, - * makeinfo/makeinfo.c, - * info/info.c: Standardize --version output. - - * makeinfo/makeinfo.c (defun_internal): Don't insert index command - if expanding macros. - (cm_footnotestyle): Don't change the footnote style if it was set - on the command line. - - * util/texi2dvi: Recompute original index files each time through loop. - Make indentation uniform. - Use same basename for the temp input files. - Standardize --version output. - - * info/Makefile.in (install), - * makeinfo/Makefile.in (install): Insert $(POST_INSTALL). - -Fri Sep 27 13:27:30 1996 Karl Berry <karl@cs.umb.edu> - - * texinfo.texi (Format with texi2dvi): Rewrite now that the script - runs in a loop. - - * info/Makefile.in (MAKEINFO): Simplify to ../makeinfo/makeinfo. - -Fri Sep 27 00:26:03 1996 Miles Bader <miles@gnu.ai.mit.edu> - - * info/terminal.c [HAVE_TERMIOS_H] (terminal_prep_terminal, - terminal_unprep_terminal): Add code for termios. - [HAVE_TERMIOS_H] (original_termios, ttybuff): New variables. - * info/termdep.h: [HAVE_TERMIOS_H]: Add include of <termios.h>. - * configure.in: Add check for <termios.h>. - -Thu Sep 26 10:46:34 1996 Karl Berry <karl@cs.umb.edu> - - * emacs/texnfo-upd.el, - * emacs/texinfo.el, - * emacs/texinfmt.el: Update from bob for new Texinfo commands, etc. - - * emacs/info.el, emacs/informat.el, emacs/makeinfo.el, - emacs/texnfo-tex.el: Update from Emacs 19.34 dist. - - * emacs/elisp-comp: Use TMPDIR if set. - - * util/Makefile.in (libdir): Remove. - - * makeinfo/Makefile.in (install), - * Makefile.in (install), - * info/Makefile.in (install): Run install-info. - (libdir): Remove. - - * texinfo.texi: Various fixes as I make this go through TeX. - - * util/install-info.c: Quote newlines in help message. - - * util/texi2dvi (texi2dvi): Run TeX until the aux/index files - stabilize, instead of just twice. From: David Shaw - <daves@gsms01.alcatel.com.au>. - -Tue Sep 24 14:43:03 1996 Karl Berry <karl@cs.umb.edu> - - * dir: Blank dir file for installation on new systems. - -Mon Sep 23 12:18:43 1996 Karl Berry <karl@cs.umb.edu> - - * makeinfo/makeinfo.c (args_from_string): Do not back up at a }; - that leads to an infinite loop. - -Sat Sep 21 17:48:04 1996 Karl Berry <karl@cs.umb.edu> - - * makeinfo/makeinfo.c (cm_xref): Do not seg fault if outside of - any node. From: Tom Tromey <tromey@creche.cygnus.com>. - (cm_ctrl): Make obsolete. - -Tue Sep 17 13:30:08 1996 Karl Berry <karl@cs.umb.edu> - - * texinfo.tex (\inforef): Move to more appropriate place. - (\pounds): Remove spurious extra $. - (\email): Typeset argument in angle brackets. - (\macro): Use \doignore for robustness, instead of just letting TeX - parse the argument. - (\unmacro): Define. - -Sat Sep 14 16:17:35 1996 Karl Berry <karl@cs.umb.edu> - - * texinfo.texi: Document multitables, new ISBN number. - -Wed Sep 11 18:01:24 1996 Karl Berry <karl@cs.umb.edu> - - * makeinfo/multi.c (struct env): Remove unused output_position - field; this needs to be global. - (setup_multitable_parameters): Implement template-defined multitables. - (output_multitable_row): Remove trailing whitespace. - - * makeinfo/makeinfo.c (_READ_BUFFER_GROWTH, struct _defines): - Remove leading underscore for POSIX/ANSI pedants. - (init_conversion): Initialize output_position here. - (init_paragraph): Instead of here, where it loses with the - multitable calls, eventually resulting in negative counts to the - write call when the output file is split. - - * texinfo.texi: First cut at macro documentation. - Change accent doc to use tables. - Remove whitespace experiments, they are now the default. - -Mon Sep 9 14:16:24 1996 Karl Berry <karl@cs.umb.edu> - - * makeinfo/makeinfo.c: Use putc instead of fprintf where possible. - (cm_accent): Put _ from @ubaraccent after argument. - - * util/texindex.c (strerror) [!strerror]: Conditionalize - declaration. - -Sat Sep 7 14:13:24 1996 Karl Berry <karl@cs.umb.edu> - - * makeinfo/makeinfo.c (commandTable): Obsolete @setchapterstyle. - -Thu Sep 5 15:45:11 1996 Karl Berry <karl@cs.umb.edu> - - * makeinfo/makeinfo.c (convert_from_loaded_file): Oops, fix - wording of initial output comment. - - * makeinfo/makeinfo.c (cm_angle_brackets): Rename from cm_key. - (commandTable): @email should produce angle brackets. - @key: Change name. - -Tue Sep 3 14:52:17 1996 Karl Berry <karl@cs.umb.edu> - - * texinfo.tex (\hsize): Decrease. - (\hoffset): Increase. - (\setleading): Decrease dramatically. - This change affects 8.5x11 format only. - - * texinfo.texi: Document accent commands. - -Mon Sep 2 11:10:49 1996 Karl Berry <karl@cs.umb.edu> - - * makeinfo/makeinfo.c (commandTable): Deprecate @ichapter and - @titlespec. - Move all the deprecated @i<section> commands to the end of the list. - - * texinfo.texi: Document @pounds{} and @centerchap{}. - - * texinfo.tex (\centerchfplain): Rewrite to use \chfplain, and to - actually center. - (\unnchfplain): Just call \chfplain. - (\chfplain): Rewrite to be generally callable. - (\centerparametersmaybe): Hook, a no-op except with @centerchap. - -Sun Sep 1 15:01:49 1996 Karl Berry <karl@cs.umb.edu> - - * texinfo.texi: Document @<whitespace>, rearrange spacing section. - - * makeinfo.c (commandTable): Make @. @? @! insert themselves, - not be sentence-non-enders. They are sentence *enders*. Also, - make @\t and @\n insert a normal space character, not themselves. - Also, define @hyphenation. - (insert_space): New function. - (cm_ignore_sentence_ender): Remove this. - (flush_output): Check only for META-SPC, not META-<sentence-ender>. - -Fri Aug 30 18:55:30 1996 Karl Berry <karl@cs.umb.edu> - - * texinfo.texi: Document @- and @hyphenation{}. - Miscellanous fixes. - - * makeinfo/makeinfo.c (commandTable): Define @- as cm_no_op, since - makeinfo doesn't do hyphenation. - -Thu Aug 29 13:05:38 1996 Karl Berry <karl@cs.umb.edu> - - * texinfo.tex (\key): Do not uppercase the argument; key names - can be mixed case, e.g., `Control'. - - * makeinfo/makeinfo.c: @infotop, @infounnumbered, - @infounnumberedsec, @infounnumberedsubsec, - @infounnumberedsubsubsec, @infoappendix, @infoappendixsec, - @infoappendixsubsec, @infoappendixsubsubsec, @infochapter, - @infosection, @infosubsection, @infosubsubsection: - Remove these long-since obsolete commands. - @iappendix, @iappendixsection, @iappendixsec, @iappendixsubsec, - @iappendixsubsubsec, @ichapter, @isection, @isubsection, - @isubsubsection, @iunnumbered, @iunnumberedsec, @iunnumberedsubsec, - @iunnumberedsubsubsec: - Deprecate these. - @infoinclude: - Obsolete this. - @,: Have to take an argument, since have to do @,{c} not c@,; can't - feasibly implement the latter in TeX. - - * makeinfo/makeinfo.c: Rename @d to @udotaccent, since this is - relatively infrequently used. - -Tue Aug 27 14:58:56 1996 Karl Berry <karl@cs.umb.edu> - - * info/info.c (print_short_help), - * util/install-info.c (print_help), - * util/texi2dvi, - * makeinfo/makeinfo.c (usage) Include bug reporting address. - -Mon Aug 26 15:27:17 1996 Karl Berry <karl@cs.umb.edu> - - * makeinfo/makeinfo.c (commandTable): Remove @input, @medbreak, - @smallbreak, @overfullrule, @br. - -Sun Aug 25 17:25:48 1996 Karl Berry <karl@cs.umb.edu> - - * makeinfo/makeinfo.c (commandTable): Unify commands that perform - the same operation, such as cm_file, cm_samp, cm_email, - etc., which all do cm_code. - - * texinfo.texi: Document @ifhtml ... @end ifhtml. Change - `PlainTeX' to `plain TeX'. - -Fri Aug 23 16:03:16 1996 Karl Berry <karl@cs.umb.edu> - - * texinfo.tex (\pounds): New Texinfo command @pounds{}. - (\parskip): New smaller value. - (\chapheadingskip, \secheadingskip, \subsecheadingskip): New smaller - values, both for 8.5x11 and @smallbook formats. From Bob. - - * makeinfo/makeinfo.c (cm_special_char): @pounds{} prints a #. - (commandTable): Add new command @pounds. - -Tue Aug 20 13:47:20 1996 Karl Berry <karl@cs.umb.edu> - - * makeinfo/makeinfo.c (CommandTable): Restore "!", accidentally - removed previously. - - * texinfo.tex (\key): Typeset a lozenge around the argument (from - gildea@intouchsys.com). - * makeinfo/makeinfo.c (cm_key): Surround arg with <...> to match - new lozenge style in TeX. - -Wed Aug 14 16:59:23 1996 Karl Berry <karl@cs.umb.edu> - - * texinfo.texi: Propagate change from rms. - -Tue Aug 13 11:33:27 1996 Karl Berry <karl@cs.umb.edu> - - * texinfo.texi: Propagate change from rms. - - * texinfo.texi: Document other @headings options. - -Sun Aug 11 13:19:42 1996 Karl Berry <karl@cs.umb.edu> - - * makeinfo/makeinfo.c (cm_accent, cm_special_char, cm_dotless): - New functions. - (CommandTable): Add new commands for all of plain.tex's - accents and non-English characters. - -Fri Aug 9 14:12:07 1996 Karl Berry <karl@cs.umb.edu> - - * makeinfo/makeinfo.c (convert_from_loaded_file): Say we're making - ``text'' file if no_headers. Also, use `input_filename' instead - of just `name' for clarity. - (suffixes): Check for no suffix last, i.e., prefer `foo.texi' as an - input file to `foo'. (The latter is probably a binary.) - -Mon Aug 5 13:52:39 1996 Karl Berry <karl@cs.umb.edu> - - * texinfo.tex (\heading, \subheading, \subsubheading): Can no - longer call the nonexistent \*secheadingi series. Instead, call - \plain*secheading. - (\plainsubsecheading, \plainsubsubsecheading): New macros, by analogy - with \plainsecheading. - (\unnumberedsubseczzz, \unnumberedsubsubseczzz): Call them. - -Sun Aug 4 16:46:10 1996 Karl Berry <karl@cs.umb.edu> - - * makeinfo/makeinfo.c (flush_output): Mask out eighth bit, that we - turned on in non-sentence enders. - -Sat Aug 3 14:03:10 1996 Karl Berry <karl@cs.umb.edu> - - * texinfo.tex (\HEADINGSdouble, \HEADINGSsingle, - HEADINGSdoubleafter, \HEADINGSsingleafter, \CHAPPAGoff, - \CHAPPAGon, \CHAPPAGodd): Set \contentsalignmacro, analogous to - \pagealignmacro. - (\startcontents): Call \contentsalignmacro instead of \pagealignmacro. - -Mon Jul 29 14:44:33 1996 Karl Berry <karl@cs.umb.edu> - - * texinfo.tex (\indexfonts): Make leading be 12pt. Otherwise, it's - too crammed. - (\smalllispx): Remove \setleading{10pt}. That was too small. - (\doprintindex): Do not call \tex ... \Etex. Index files are Texinfo - source, not TeX source, except for using \ instead of @ as the - escape character (for now). - -Sun Jul 28 13:37:05 1996 Karl Berry <karl@cs.umb.edu> - - * texinfo.tex (paragraphindent): Move to more reasonable place in - the source file. - (chapfonts, secfonts, subsecfonts, indexfonts): Call \setleading. - (\chfplain, \secheading, \plainsecheading, \subsecheading, - \subsubheading): Rewrite to properly \hangindent the title. - (\sectionheading): New generic macro to print section titles. - - * texinfo.texi: Update the `Obtaining TeX' node. - -Fri Jul 26 14:11:48 1996 Karl Berry <karl@cs.umb.edu> - - * util/texi2dvi: Do macro expansion with makeinfo before running TeX. - Various expansion safety measures added for test; avoid use of -o. - - * makeinfo/makeinfo.c (usage): More usage message tweaks. - -Fri Jul 26 11:55:37 1996 Karl Berry <karl@laurie> - - * util/texi2dvi: Format usage message to conform to the other *utils. - -Thu Jul 25 17:05:47 1996 Karl Berry <karl@cs.umb.edu> - - * emacs/Makefile.in: Do not compile the Elisp by default. We - don't install it, so it confuses people to compile it. - -Sun Jul 21 07:20:09 1996 Karl Berry <karl@cs.umb.edu> - - * util/Makefile.in (install-info): Dependency should be - install-info.o, not install-info. Also, update copyright years. - - * makeinfo/makeinfo.c (cm_printindex): Don't call execute_string - to print index entries, we've already done the expansion now. - - * makeinfo/makeinfo.h: Add copyright. Finish merge of rms changes. - * makeinfo/makeinfo.c: Finish merge, add my expansion changes again. - * makeinfo/multi.c: Add copyright message. - -Fri Jul 19 10:35:22 1996 Karl Berry <karl@cs.umb.edu> - - * info/info.c: Update copyright date. - - * info/info.texi, - * util/install-info.c, - * emacs/Makefile.in, - * emacs/texnfo-tex.el, - * emacs/Makefile.in: Change FSF address. - - * Merged changes from bfox -- below, plus multitable changes, plus - lots more. - - Sun Apr 14 08:49:50 1996 Brian J. Fox <bfox@nirvana.samsara.com> - - * makeinfo/makeinfo.c (remember_node_reference): Numerous commands - call remember_node_reference. If a node has not yet been defined, - use the empty string as the current node for those cases. - - Mon Feb 12 17:35:38 1996 Brian J. Fox <bfox@nirvana.samsara.com> - - * makeinfo/makeinfo.c (push_node_filename): Clean up calls to - xmalloc and xrealloc. Only have to call xrealloc. - - Fri Jan 26 08:00:38 1996 Brian J. Fox <bfox@nirvana.samsara.com> - - * info/session.c (info_input_buffer_space_available): Fix typo - which forced the limitation of the sizeof (int) instead of sizeof - (buffer). - - * Makefile.in (PACKVER): now at 3.8. Add TERMIOS support to - Info. Minor bugs fixed in Makeinfo. - -Sat Jul 13 11:58:57 1996 Karl Berry <karl@cs.umb.edu> - - * texinfo.texi (ftable vtable): Mention example. - -Sun Jun 30 14:59:51 1996 Karl Berry <karl@goldman.gnu.ai.mit.edu> - - * makeinfo/makeinfo.c (cm_email): New function for new @email command. - * texinfo.texi (email): New node documenting it. - -Wed Apr 17 18:07:34 1996 Richard Stallman <rms@mole.gnu.ai.mit.edu> - - * makeinfo/makeinfo.c (cm_kbd): Do nothing if in @example or @code. - (struct brace_element): New field in_fixed_with_font. - (remember_brace_1): Save in_fixed_with_font. - (pop_and_call_brace): Restore in_fixed_with_font. - (cm_code): Don't decrement in_fixed_with_font at end of construct. - (struct istack_elt): New field in_fixed_with_font. - (push_insertion, pop_insertion): Save and restore in_fixed_with_font. - (end_insertion): Don't decrement in_fixed_with_font here. - (not_fixed_width): New function. - (cm_sc, cm_var, cm_italic, cm_roman, cm_titlefont): - Use not_fixed_width. - -Sat Apr 13 23:22:05 1996 Richard Stallman <rms@mole.gnu.ai.mit.edu> - - * util/install-info.c (main): Fatal error if no input file spec'd. - Look for START-INFO-DIR-ENTRY, not BEGIN-INFO-DIR-ENTRY. - -Thu Apr 11 18:21:50 1996 Richard Stallman <rms@mole.gnu.ai.mit.edu> - - * makeinfo/makeinfo.c (cm_enddots): New function. - (self_delimiting): Accept -, ^ and ". - (CommandTable): Add commands -, ^, ", enddots, centerchap. - -Sun Mar 24 12:18:32 1996 Richard Stallman <rms@mole.gnu.ai.mit.edu> - - * makeinfo/makeinfo.c (enum insertion_type): Add `direntry'. - (insertion_type_names): Add "direntry". - (cm_dircategory): New function. - (cm_direntry): New function. - (CommandTable): Add "dircategory" and "direntry". - (insert_string): New function. - (end_insertion): Handle direntry. - (begin_insertion): Handle direntry. - -Sun Mar 24 11:10:05 1996 Karl Berry <karl@spiff.gnu.ai.mit.edu> - - * makeinfo/makeinfo.c (cm_url): New function for new @url command. - -Fri Feb 23 21:14:40 1996 Richard Stallman <rms@mole.gnu.ai.mit.edu> - - * info/Makefile.in (install, uninstall): Use manprefix. - -Fri Feb 23 19:50:18 1996 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu> - - * util/Makefile.in (install-info, install-info.o): New targets. - (all): Depend on install-info. - (install, uninstall): Operate on install-info. - - * install-info.c: New file. - -Wed Jan 3 10:01:45 1996 Brian J. Fox <bfox@nirvana.datawave.net> - - * makeinfo/makeinfo.c (make_index_entries_unique): Be a little bit - stricter about what makes two index entries identical. - -Fri Dec 29 13:00:24 1995 Brian J. Fox <bfox@wizard.datawave.net> - - * makeinfo/makeinfo.c (Whole File): Add @detailmenu for allowing - detailed menu listings to appear while still defaulting nodes. - -Wed Dec 27 13:54:30 1995 Brian Fox <bfox@albert.gnu.ai.mit.edu> - - * makeinfo/makeinfo.c (cm_code): Always notice that we are in - fixed_width_font, even if other formatting changes are not to take - place. - -Sat Dec 23 11:48:43 1995 Brian J. Fox <bfox@wizard.datawave.net> - - * info/man.c: (clean_manpage) Remove ^L's from page. - - * makeinfo/makeinfo.c (get_brace_args): Change some memcpy's to - memmoves. - - * info/info.c (main): Prefer caseless matches over partial - matches. - - * Makefile.in (All Subdir Targets): Change suggested by Debian - people which allows errors in recursive makes to kill the - top-level make. - - * makeinfo/Makefile.in (makeinfo.dvi): New target. - - * info/info.c (main): Print version of containing texinfo package. - - * makeinfo/makeinfo.c (flush_output): Don't strip high-bit from - sentence_enders. - Print the version number of the containing texinfo package. - - * info/man.c (locate_manpage_xref): Count the 0th entry. - - * makeinfo/makeinfo.c (cm_menu): If a menu is seen before a node - has been defined, warn, and create the node `Top'. - -Wed Jun 21 03:19:39 1995 Brian Fox <bfox@albert.gnu.ai.mit.edu> - - * makeinfo/makeinfo.c (cm_infoinclude): Clean up after printing - error if the file couldn't be included. - (discard_braces): Print errors only for those unmatched open - braces that belong to a texinfo command. - - * */Makefile.in: Use @CFLAGS@ and @LDFLAGS@. - - * makeinfo/makeinfo.c: End `node_search_string' and friends with a - terminating null character. - -Wed Jun 21 01:23:49 1995 Jim Meyering (meyering@comco.com) - - * makeinfo/makeinfo.c: Close comment after #endif. - -Tue Jun 20 04:58:26 1995 Brian Fox <bfox@albert.gnu.ai.mit.edu> - - * emacs/Makefile.in (install): Fix typo: "fle" -> "file". - - * Makefile.in (VERSION): Bump to 3.6 - - * info/clib.c: Include general.h for `info_toupper' and friends. - - * info/clib.h: strncmp and strncascmp return an int. What kind of - drugs was I on? - -Mon Jun 19 23:34:47 1995 Brian Fox <bfox@albert.gnu.ai.mit.edu> - - * makeinfo/makeinfo.c (make_index_entries_unique): Copy the last - index entry. - -Mon Jun 19 21:55:49 1995 Noah Friedman <friedman@prep.ai.mit.edu> - - * util/texi2dvi (--version): New option. - Cosmetic changes. - -Mon Jun 19 16:06:40 1995 Brian Fox <bfox@albert.gnu.ai.mit.edu> - - * makeinfo/makeinfo.c (cm_macro): Fix typo. `x != y' is not the - same as `x |= y'. - - * info/Makefile.in (exec_prefix): Use @exec_prefix@ not $(prefix). - * makeinfo/Makefile.in (exec_prefix): Use @exec_prefix@ not $(prefix). - * util/Makefile.in (exec_prefix): Use @exec_prefix@ not $(prefix). - * libtxi/Makefile.in (exec_prefix): Use @exec_prefix@ not $(prefix). - - * emacs/Makefile.in (uninstall): New target. - (install): Use the definition of $(lispdir), don't dynamically - find it. Use INSTALL_DATA not cp. - (exec_prefix): use @exec_prefix@ not $(prefix). - - * makeinfo/makeinfo.c (apply): If there isn't an actual argument - for a named argument, default it to "". - - * Makefile.in (VERSION): Now at 3.5. - (texinfo): Make ./makeinfo/makeinfo depend on sub-all for parallel - makes. - - * emacs/Makefile.in (ELISP_OBJS): Explictly declare .el and .elc - in the SUFFIXES list. - - * makeinfo/makeinfo.c (cm_today): Special case for losing alpha. - * (minor_version): Increase to 63. - - * info/info.c (version_string): Now at 2.14. - * info/tilde.c: Declare getenv to return (char *). - * info/window.c (build_message_buffer): Jump through hoops to keep - DEC Alpha's happy. - - * info/xmalloc.c: Declare malloc and realloc as (void *) returning - functions. - -Sun Jun 18 12:47:21 1995 Richard Stallman <rms@mole.gnu.ai.mit.edu> - - * emacs/detexinfo.el (detexinfo-line-cmds-without-arg): - Handle ifhtml. - -Fri Jun 16 13:48:14 1995 Brian Fox <bfox@albert.gnu.ai.mit.edu> - - * util/texindex.c: Update TEXINDEX_VERSION_STRING for texinfo 3.4 - - * (All *.c *.h *.in): Change FSF old address to new. - * texinfo.texi (Obtaining TeX): Change FSF old address to new - address. Change Old phone numbers to new phone numbers. - - * Makefile.in (VERSION): Change to 3.4. - -Thu Jun 15 22:49:07 1995 Robert J. Chassell <bob@hill.gnu.ai.mit.edu> - - * texinfo.texi, emacs/=development/cover.texi: update - Texinfo distribution package version number - -Thu Jun 15 09:23:02 1995 Brian J. Fox <bfox@wizard.datawave.net> - - * info/info.c: (minor_version): Set to 13. - - * info/clib.c,h: New files gather together replacement functions - for those POSIX-style C library functions that are not present on - the target system. - - * info/Makefile.in (SRCS): Add clib.c and clib.h. makedoc now - needs clib.o to build on systems missing various string.h stuff. - - * info/variables.c (whole file): Call strdup, not savestring. - * info/tilde.c (whole file): Call strdup, not savestring. - * info/search.c (whole file): Call strdup, not savestring. - * info/nodes.c (whole file): Call strdup, not savestring. - * info/nodemenu.c (whole file): Call strdup, not savestring. - * info/man.c (whole file): Call strdup, not savestring. - * info/makedoc.c (whole file): Call strdup, not savestring. - * info/m-x.c (whole file): Call strdup, not savestring. - * info/info.c (whole file): Call strdup, not savestring. - * info/indices.c (whole file): Call strdup, not savestring. - * info/echo_area.c (whole file): Call strdup, not savestring. - * info/session.c (whole file): Call strdup, not savestring. - * info/filesys.c (whole file): Call strdup, not savestring. - - * makeinfo/makeinfo.c (minor_version): Change to 1.62. - * makeinfo/makeinfo.c (get_execution_string): Initialize `i' to 0 - in case there are no execution_strings. - -Wed Jun 14 17:48:06 1995 Brian J. Fox <bfox@wizard.datawave.net> - - * texinfo.texi: include "texinfo.tex", not "texinfo". - * info/session.c (forget_window_and_nodes): Place a sequence point - in between "info_windows[i] = info_windows[++i];" as per various - compiler experts. - - * makeinfo/makeinfo.c (strdup): Create this function if the system - doesn't have it. - (discard_insertions): Use the insertion's filename, not the - current input file. - (push_insertion): Remember the current input file with each - insertion. - (pop_insertion): Free storage used by remembered input file. - - * makeinfo/makeinfo.c (whole file): Use `strdup' instead of - `savestring'. - * configure.in: Check for `strdup'. - -Wed Jun 14 15:58:51 1995 Brian Fox <bfox@albert.gnu.ai.mit.edu> - - * libtxi/Makefile.in (prefix): Use @prefix@, not /usr/local/ - -Wed Jun 14 10:50:57 1995 Brian J. Fox <bfox@wizard.datawave.net> - - * Makefile.in (DISTFILES): Don't include *.elc files in the list - of files to distribute. - (installdirs): Include `emacs' in the list of sub-dirs with - Makefile.in's. - - * emacs/elisp-comp: Shell script which batch compiles the *.el files. - * emacs/Makefile.in: New file contains targets to build the elc files. - * configure.in: Add `emacs/Makefile' to the list of created makefiles. - * makeinfo/makeinfo.c (whole file): Give every function a return - type. All cm_xxx functions are now void. Add declarations for - functions to top of file. - -Mon Jun 12 12:00:57 1995 Brian J. Fox <bfox@wizard.datawave.net> - - * info/man.c (reference_section_starters): Add versions of "SEE - ALSO" and "RELATED INFORMATION" with tabs instead of spaces as - well. - - * util/texindex.c: Back out changes for OFF_T. Explicity coerce - the result of lseek to a long, and use longs everywhere. - - * texinfo.texi: Change "@end shorttitlepage" to "@end titlepage". - * makeinfo/makeinfo.c: Make @shorttitlepage ignore the rest of the - line. - - * util/texindex.c (strrchr): Create if not present. - Test for HAVE_STRCHR and HAVE_STRING_H. - (main): Make PROGRAM_NAME be just the last path componenet of argv[0]. - (decode_command): Rewrite. - (usage): Rewrite. Now texindex handles --version. - - * makeinfo/makeinfo.c (make_index_entries_unique): Rewrite from - scratch. - - * Don't distribute created info files with texinfo. After all, - the user will have the tools necessary to create them, yes? - - * Makefile.in (distclean): Remove *.log - - * info/man.c (read_from_fd): Change timeout value for select to 15 - seconds. Some systems (e.g., albert.ai.mit.edu) actually need - more than 10 seconds to format a man page. - - * info/tilde.c: Fix typo in declaration for - `tilde_expansion_failure_hook'. - -Wed Jun 7 13:36:53 1995 Brian Fox <bfox@albert.gnu.ai.mit.edu> - - * info/tilde.h: Change type of tilde_expansion_failure_hook to - a pointer to a function returning a (char *). - * info/tilde.c: Change type of tilde_expansion_failure_hook to a - pointer to function returning a (char *). - - * makeinfo/makeinfo.c (get_execution_string): Don't use `i' in the - latter assignment, use `execution_strings_index' instead. - - * info/man.c (read_from_fd): Change logic to avoid using FIONREAD. - - * info/xmalloc.c (xrealloc): Use (void *), not (caddr_t *). - * info/xmalloc.c (xmalloc): Use (void *), not (caddr_t *). - - * Makefile.in (DISTFILES): Don't find RCS no "=" directories. - - * util/Makefile.in (prefix): Use @prefix@ as the value. - * info/Makefile.in (prefix): Use @prefix@ as the value. - * makeinfo/Makefile.in (prefix): Use @prefix@ as the value. - -Wed Jun 7 12:29:28 1995 Robert J. Chassell <bob@hill.gnu.ai.mit.edu> - - * texinfo.texi: Correct minor typos. - - * emacs/texinfmt.el: Don't require @shorttitlepage to be inside - of @iftex ... @end iftex - -Mon May 8 18:33:52 1995 Brian J. Fox <bfox@wizard.datawave.net> - - * info/nodes.c: #include "man.h" if HANDLE_MAN_PAGES. - (info_get_node_of_file_buffer): If the file buffer is one - associated with manpages, call the manpage node finding - function instead. - (info_find_file_internal): If the file buffer is one associated - with manpages, avoid doing any file I/O. - (info_reload_file_buffer_contents): Ditto. - (info_find_file_internal): Call create_manpage_file_buffer instead - of info_load_file_internal. - - * info/info.c: #include "man.h" if HANDLE_MAN_PAGES. - (main): If the initial node cannot be found, perhaps find it as a - manpage. - * info/info-utils.c: #include "man.h" if HANDLE_MAN_PAGES. - (info_xrefs_of_node): If handling man pages, and this is a manpage - node, use xrefs_of_manpage. - - * info/session.c (info_set_input_from_file): Only fclose (stream) - if it is non-null and not stdin. - #include "man.h" if HANDLE_MAN_PAGES. - (info_menu_or_ref_item): If handling man pages, and this is a - manpage node, get the xrefs from manpage_xrefs_in_binding. - (info_man): Compile in for M-x man if handling man pages. - (info_move_to_xref): If handling man pages, and the current node - is a manpage node, use locate_manpage_xref to get xrefs. - -Thu May 4 08:55:23 1995 Brian J. Fox <bfox@wizard.datawave.net> - - * info/info.c (main): If the output device is not a terminal, and - no output filename has been specified, make user_output_filename - be "-", so that the info is written to stdout, and turn on the - dumping of subnodes. - -Thu Apr 13 18:05:06 1995 Daniel Hagerty <hag@churchy.gnu.ai.mit.edu> - - * texinfo.texi: Fixed @end titlepage/@end shorttitlepage - -Sat Apr 8 12:51:49 1995 Roland McGrath <roland@churchy.gnu.ai.mit.edu> - - * makeinfo/makeinfo.c [! HAVE_STRERROR] (strerror): New function, - snarfed from ../info/filesys.c. - (cm_infoinclude): Use strerror instead of sys_errlist. - -Tue Apr 4 18:44:00 1995 Brian J. Fox <bfox@wizard.datawave.net> - - * util/texindex.c (sort_offline): Change TOTAL to be an off_t. - * util/texindex.c (sort_in_core): Change TOTAL to be an off_t. - * util/texindex.c (MAX_IN_CORE_SORT): Cast to off_t. - -Sun Apr 2 16:20:13 1995 Brian J. Fox <bfox@wizard.datawave.net> - - * info/Makefile.in: Define DEFAULT_INFOPATH in case we are - compiling in the current directory. - * info/Makefile.in (info.o): Add filesys.h because of DEFAULT_INFOPATH. - * info/(search.c,h, nodes.c info-utils.c) Use strcasecmp and - strncasecmp instead of stricmp and strnicmp. Define strcasecmp - and strncasecmp in search.c if !HAVE_STRCASECMP. - * info/search.c: If HAVE_STRING_H include it. - * info/nodes.c: If HAVE_STRING_H include it. - * info/info-utils.c: If HAVE_STRING_H include it. - * info/info.h: If HAVE_STRING_H include it. - * configure.in (AC_HAVE_FUNCS): Check for strcasecmp. - * makeinfo/makeinfo.c (strcasecmp): Define if !HAVE_STRCASECMP. - * makeinfo/makeinfo.c (entire file): Use `strcasecmp' instead of - `stricmp'. - * makeinfo/makeinfo.c (cm_ifeq): New command takes three args. - Compares first two, executes remainder if the first two are - string-wise eq. - * makeinfo/makeinfo.c (ifhtml): Add to command list. Shouldn't be - used, but it is by people who don't want to hack macros. - -Sat Apr 1 09:20:14 1995 Brian J. Fox <bfox@wizard.datawave.net> - - * makeinfo/makeinfo.c (begin_insertion): Fix reversed arguments to - line_error. - - * info/info-stnd.texi: Use "end" footnote style instead of "separate". - - * info/Makefile.in: Change "rm -f" to $(RM). - - * info/general.h: Define zero_mem in terms of memset if we have - it, else in terms of bzero if we have that, else as inline code. - - * info/NEWS: Updated to reflect changes in 2.11. - -Fri Mar 31 22:38:31 1995 Brian J. Fox <bfox@wizard.datawave.net> - - * Makefile (DISTFILES): Don't include *.a, *orig, nor *.e - files. - (DISTFILES): - -Sat Mar 4 12:16:29 1995 Brian J. Fox <bfox@wizard.datawave.net> - - * Makefile.in: Use @prefix@ instead of hardwired `/usr/local'. - Clean up makefile rules which make in subdirs. - (ALL_SUBDIRS): Add makeinfo/macros to list of subdirectories. - - * configure.in (AC_CHECK_FUNCS): Add `bcopy' to list of things to - check for. - -Fri Mar 3 13:54:10 1995 Robert J. Chassell <bob@hill.gnu.ai.mit.edu> - - * texinfo.texi: Minor changes for incremental new edition 2.20. - -Fri Mar 3 19:01:36 1995 Brian J. Fox <bfox@wizard.datawave.net> - - * filesys.c (filesys_read_info_file): Local variable ST_SIZE is a - long which has the value of finfo->st_size casted to it. - * nodes.c (whole file): Similar changes. - - These changes and the following for makedoc.c were required for - proper operation on HPm68k NetBSD. - -Mon Feb 27 15:16:27 1995 Brian J. Fox <bfox@wizard.datawave.net> - - * makedoc.c (process_one_file): Local variable FILE_SIZE is a long - which has the value of finfo.st_size casted to it. - - -Fri Mar 3 18:58:38 1995 Brian J. Fox <bfox@wizard.datawave.net> - - * makeinfo.c (find_and_load): Cast fileinfo.st_size to a long for - internal use. This makes things work on NetBSD. - - -Fri Mar 3 13:54:10 1995 Robert J. Chassell <bob@hill.gnu.ai.mit.edu> - - * texinfo.texi: Minor changes for incremental new edition 2.20. - -Fri Mar 3 09:41:39 1995 Brian J. Fox <bfox@wizard.datawave.net> - - * configure.in (TERMLIBS): Use AC_CHECK_LIB instead of - AC_HAVE_LIBRARY. - -Mon Jan 9 16:55:31 1995 Brian Fox <bfox@churchy.gnu.ai.mit.edu> - - * Makefile.in (DISTFILES): Add the directory EMACS-BACKUPS to the - list of things to avoid distributing. - -Tue Nov 29 17:48:37 1994 David J. MacKenzie <djm@duality.gnu.ai.mit.edu> - - * configure.in: Check for off_t. - * util/texindex.c (main): Use it. - -Fri Nov 11 14:46:28 1994 David J. MacKenzie <djm@duality.gnu.ai.mit.edu> - - * configure.in: Update for Autoconf v2. - -Thu Oct 13 02:17:38 1994 Richard Stallman <rms@mole.gnu.ai.mit.edu> - - * emacs/detexinfo.el (detexinfo): Handle @!, @?, @^, @". - -Mon Aug 1 03:26:13 1994 Richard Stallman <rms@mole.gnu.ai.mit.edu> - - * texindex.c: Move the memset define down past string.h include. - -Tue Jun 28 14:21:43 1994 David J. MacKenzie (djm@churchy.gnu.ai.mit.edu) - - * makeinfo/makeinfo.c: Add --help option. - (usage): Take args for stream and error code. - Change callers. - (print_version_info): Write to stdout, not stderr. - -Wed May 18 18:55:24 1994 Brian J. Fox (bfox@ai.mit.edu) - - * info/session.c (forget_window_and_nodes): Negate test for - internal_info_node_p. We only want to free the text if it is - not an internal node. - -Thu Mar 10 03:07:18 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) - - * texindex.c (memset): Fix invalid parm name (was 0). - -Thu Feb 10 12:56:52 1994 Noah Friedman (friedman@prep.ai.mit.edu) - - * makeinfo/makeinfo.c (current_item_function): Don't loop if elt - is NULL. - -Wed Feb 9 12:21:09 1994 Brian J. Fox (bfox@ai.mit.edu) - - * makeinfo/makeinfo.c (minor_version): Release now at 1.60. - - * makeinfo/makeinfo.c (expand_filename): Additional fixes. Now - when called with NULL filename, makes an output filename from the - input filename. - (convert_from_loaded_file): If REQUIRE_SETFILENAME is #defined (no - longer the default case) then error if no @setfilename was found - in the file. If REQUIRE_SETFILENAME is not #defined, the input - file starts either at the first line, or at the second line if the - first line contains the text "\input", and the output filename is - the input file name without directory and with ".info" replacing - any extension found. - (convert_from_loaded_file): Fixed bug in search for first - occurence of "@setfilename". - -Tue Feb 8 14:16:58 1994 Noah Friedman (friedman@prep.ai.mit.edu) - - * configure.in: Check for sys/file.h. - info/dir.c, info/filesys.c, info/makedoc.c, info/nodes.c, - info/session.c, info/termdep.h, makeinfo/makeinfo.c - [HAVE_SYS_FILE_H]: Include <sys/file.h>. - - * makeinfo/makeinfo.c (convert_from_loaded_file): Print - real_output_filename instead of output_filename, so user knows - exactly where output file is going. - - Fri Jun 11 14:34:30 1993 Ian Lance Taylor (ian@cygnus.com) - * configure.in: Check for sigprocmask and sigsetmask. - * info/signals.h (HAVE_SIGSETMASK): Don't define. - (HAVE_SIGPROCMASK): Use instead of _POSIX_VERSION. - (BLOCK_SIGNAL, UNBLOCK_SIGNAL): If neither HAVE_SIGPROCMASK nor - HAVE_SIGSETMASK is defined, define these to do nothing. - * info/signals.c (sigprocmask): Don't compile if HAVE_SIGSETMASK - is not defined. - - * info/terminal.c (terminal_prep_terminal): Don't clobber VINTR - and VQUIT in conditionals. - -Mon Feb 7 18:10:22 1994 Brian J. Fox (bfox@ai.mit.edu) - - * makeinfo/makeinfo.c (full_pathname): Correct to really return - the full pathname of the input argument. Now makeinfo - /foo/bar.texi, where /foo/bar.texi contains "@setfilename - bar.info", correctly leaves the output file in "./bar.info". - Note that "@setfilename ../bar.info" still works; this is already - an absolute pathname. - -Sat Feb 5 13:04:05 1994 Brian J. Fox (bfox@ai.mit.edu) - - * makeinfo/makeinfo.c: Version 1.59 released. - - * makeinfo/makeinfo.c (whole file): Large number of changes allow - the "-E filename" option to be used to write a macro expanded - output file. On a file which contains no @include's and no - @macro's, the output file is identical to the input file. - - * makeinfo/makeinfo.c (declarations): Remove cm_tex (). It is - never used since it is implemented with `command_name_condition'. - - * makeinfo/makeinfo.c (add_char): Shift braces following the - current break point if we have deleted any characters. - (adjust_braces_following): New function adjusts all of the markers - in the brace stack which follow HERE by AMOUNT. This fixes a bug - where (for example) @var{} immediately following a line break - which is the end of a sentence modified the output incorrectly. - -Wed Feb 2 14:14:03 1994 Brian J. Fox (bfox@ai.mit.edu) - - * makeinfo: Version 1.58. - - * makeinfo/makeinfo.c (cm_node): Add extra hair to allow - backtracking through execution strings. Add extra hair to allow - the first node seen after a @top node is seen to adjust the - sectioning level of the @top node and associated menus. - Fix a few typos. - Add facility for macros to invoke the original definition. This - works by not allowing a single macro to recurse. Mutual recursion - is also disallowed with this plan. - - * makeinfo/macros: New directory contains shippable macros. - * makeinfo/macros/simpledoc.texi: Macros which simplify the most - common uses of TeXinfo. See the example file. - Macros are now a reasonable way to get people started using - TeXinfo. - -Mon Jan 31 12:54:36 1994 Brian J. Fox (bfox@ai.mit.edu) - - * makeinfo/makeinfo.c (minor_version): Increase to 57. - - * makeinfo/makeinfo.c (cm_node): Call execute_string on the node, - next, prev, and up pointers. - (reader_loop): Change logic for `@bye'. No longer required at the - ends of executed strings. - (execute_string): Do not append `@bye' to the string to execute. - - * makeinfo/makeinfo.c (whole file): Use COMMAND_PREFIX instead of - hardcoding `@' character in strings and searches. - - * makeinfo/makeinfo.c (read_command): If HAVE_MACROS is defined, - then recognize and execute macros here. - (CommandTable): Add "macro" and "unmacro" to table if HAVE_MACROS - is defined. - - * makeinfo/makeinfo.c (cm_macro, cm_unmacro, execute_macro) - makeinfo/makeinfo.c (get_macro_args, find_macro, add_macro) - makeinfo/makeinfo.c (delete_macro, array_len, apply): - New functions implement macro facility if HAVE_MACROS is - defined. - - * makeinfo/macro.texi (new file): Examples of using the new macro - facility. - -Mon Jan 31 10:24:52 1994 Noah Friedman (friedman@prep.ai.mit.edu) - - * makeinfo/makeinfo.c (executing_string): Restore global - declaration. - -Mon Jan 24 23:48:26 1994 Noah Friedman (friedman@prep.ai.mit.edu) - - * texinfo.texi: Various typo fixes from Bob Chassell - <bob@gnu.ai.mit.edu>. - -Thu Jan 6 13:34:21 1994 Noah Friedman (friedman@prep.ai.mit.edu) - - * texinfo.texi: Turned on smallbook format and @set smallbook. - -Wed Dec 15 20:08:43 1993 Noah Friedman (friedman@prep.ai.mit.edu) - - * info/filesys.h (DEFAULT_INFOPATH): Added /usr/local/info, - /opt/gnu/info, /usr/share/info, and /usr/local/share/info. - -Tue Dec 14 19:10:20 1993 Noah Friedman (friedman@prep.ai.mit.edu) - - * libtxi/Makefile.in (ALLOCA): Define from configure. - -Fri Dec 10 04:33:12 1993 Noah Friedman (friedman@prep.ai.mit.edu) - - * util/texi2dvi: Put under RCS control. - -Sun Dec 26 11:55:46 1993 Brian J. Fox (bfox@ai.mit.edu) - - * info/session.c (info_numeric_digit_arg_loop): Fix doc string. - - * info/infodoc.c (create_internal_info_help_node): Print out list - of functions which have to keystroke equivalent if we support - NAMED_FUNCTIONS. - - * info/filesys.c (compress_suffixes): Add ".gz" for "gunzip" to - alist. - - * info/footnotes.c (make_footnotes_node): If refs[i] doesn't have - a nodename, then it couldn't be a reference to a footnote. - - * info/nodemenu.c (get_visited_nodes): Handle the case where - filter_func has left no possible buffers to select. - -Sat Dec 25 10:35:56 1993 Brian J. Fox (bfox@ai.mit.edu) - - * info/infodoc.c (create_internal_info_help_node): Conditionalize - generation of the help node based on the #define - HELP_NODE_GETS_REGENERATED. When this is not set (the default) - the help node is generated exactly once, and is not gc'able. - Otherwise, a new node is always created for the help window, and - the old node gets garbage collected by the gc system. - (info_find_or_create_help_window): Conditionalize window node - selected based on the #define HELP_NODE_GETS_REGENERATED. - - * info/dir.c (add_menu_to_file_buffer): Place exactly one blank - line between directory entries. - - * info/info.c (version_string): Update minor version to "11". - - * info/info.h: Update comment to "2.11". - - * info/dir.c (maybe_build_dir_node): Only add the contents of a - new file if it is not identical to the file of the DIR buffer. - - * info/nodes.c (info_get_node): Call `maybe_build_dir_node' on - "dir" as well as "localdir" to mimic emacs-19.22 "dir" merging - behaviour. - -Fri Dec 3 13:41:44 1993 Brian J. Fox (bfox@ai.mit.edu) - - * info/info-utils.c (canonicalize_whitespace): Suppress whitespace - found at the start of STRING. - -Sat Nov 20 14:00:50 1993 Brian J. Fox (bfox@hippie) - - * info/indices.c (DECLARE_INFO_COMMAND): Fix typo in assignment to - `old_offset' (= instead of ==). - -Tue Nov 2 12:22:40 1993 Brian J. Fox (bfox@ai.mit.edu) - - * makeinfo/makeinfo.c (make_index_entries_unique): New function - makes a sorted array have all unique entries by appending numbers - to the ends of strings. - (sort_index): Call `make_index_entries_unique'. - -Mon Sep 20 12:04:05 1993 Brian J. Fox (bfox@ai.mit.edu) - - * makeinfo/makeinfo.c (get_execution_string): New Function returns - a pointer to an EXECUTION_STRING structure. - (execute_string): No longer uses a static string; call - `get_execution_string' instead in order to get a free buffer for - consing. - -Sun May 23 07:00:20 1993 Noah Friedman (friedman@prep.ai.mit.edu) - - * Texinfo 3.1 released. - -Sat May 22 18:21:27 1993 Noah Friedman (friedman@prep.ai.mit.edu) - - * info/info.c (info_patch_level): Increment constant to 1. - - * info/Makefile.in (DEFAULT_INFOPATH): Default definition deleted. - Makefile.in: Put it here instead. - * Makefile.in (MDEFINES): Add DEFAULT_INFOPATH. - - * configure.in: check for vfprintf and vsprintf. - - * makeinfo/makeinfo.c: Version 1.55. - - * makeinfo/makeinfo.c (add_word_args, execute_string) [HAVE_VARARGS_H]: - Don't use this definition unless HAVE_VSPRINTF is also defined. - (error, line_error, warning) [HAVE_VARARGS_H]: Don't use this - definition unless HAVE_VFPRINTF is also defined. - Remove indentation of all cpp directives, except for #pragma. - -Fri May 21 14:34:24 1993 Noah Friedman (friedman@prep.ai.mit.edu) - - * texinfo.texi: Rename to texi.texi. - Change @setfilenname and START-INFO-DIR-ENTRY to `texi.info'. - - * Makefile.in (MDEFINES): Pass LDFLAGS to sub-makes. - (realclean): Delete `configure'. - Changed all references to texinfo.info to texi.info - - * configure.in: Add AC_PROG_RANLIB, and AC_CONST. - Check for `rindex' function. - Check for varargs.h. - Clean up symbol names for header files so a single AC_HAVE_HEADERS - can be used. - (AC_INIT): Use texi.texi instead of makeinfo/makeinfo.c - - * info/info-utils.h: Copy definitions of bcopy, index, and rindex - (with appropriate #ifdef wrappers) from termdep.h. These are - included by a mutually exclusive set of files. - - * info/termdep.h [HAVE_SYS_PTEM]: Use HAVE_SYS_PTEM_H instead. - - * info/terminal.c, info/termdep.h [HAVE_TERMIO]: Use HAVE_TERMIO_H - instead. - - * info/makedoc.c, info/filesys.c [!O_RDONLY]: Include fcntl.h or - sys/fnctl.h, depending on whether HAVE_SYS_FCNTL_H is set. - - * info/termdep.h: Remove all indentation in #-exprs. - Remove old assumptions about bcopy, index, and rindex. - [HAVE_BCOPY]: Define bcopy. - [HAVE_RINDEX]: Define index and rindex. - - * info/nodes.c (info_get_node): Don't call stricmp if nodename is - NULL. Remove indentation in #-exprs. - - * info/echo_area.c (echo_area_stack_depth): Declare static. - - * info/Makefile.in (DEFAULT_INFOPATH): Make separate Makefile - variable so it can be overridden more easily by the user. Add `.' - to beginning of path. - (clean): Delete core.* (386bsd core files). - (MAKEDOC): Variable removed. Refer to `makedoc' explicitly. - (funs.h): Add `:' commands after if, to avoid spurious nonzero - exit statuses. - - * info/userdoc.texi: Improved comments explaining its purpose. - - * makeinfo/makeinfo.c [HAVE_VARARGS_H]: Include varargs.h. - (error, line_error, warning, add_word_args, - execute_string)[HAVE_VARARGS_H]: New versions that - use varargs. From bfox. - - * makeinfo/Makefile.in (clean): Delete core.* (386bsd core files). - - * util/Makefile.in (clean): Remove core.* (386bsd core files). - - * libtxi/Makefile.in: Remove all references to $(common). - (RANLIB): New variable, set from autoconf. - (libtxi.a): Use $(RANLIB) instead of `ranlib' in target rules. - (clean): Delete core.* (386bsd core files). - -Tue May 18 12:08:24 1993 Robert J. Chassell (bob at grackle.stockbridge.ma.us) - - * emacs/texinfmt.el (texinfo-format-refill): Do not fill a section - title line with the asterisks, hyphens, etc. that underline - it in any circumstance. - -Sun May 16 13:53:43 1993 Noah Friedman (friedman@prep.ai.mit.edu) - - * util/mkinstalldirs: handle relative pathnames. - -Fri May 14 20:18:49 1993 Noah Friedman (friedman@prep.ai.mit.edu) - - * util/mkinstalldirs: initialize IFS if unset. - -Tue May 11 06:33:14 1993 Noah Friedman (friedman@prep.ai.mit.edu) - - * makeinfo/makeinfo.c (cm_item): don't dereference item_func if NULL. - -Mon May 10 14:50:31 1993 Noah Friedman (friedman@prep.ai.mit.edu) - - * Texinfo 3.0 released. - - * Makefile.in (ALLOCA): Provide for substitution. - -Mon May 10 10:12:53 1993 Noah Friedman (friedman@prep.ai.mit.edu) - - * emacs/texinfmt.el (texinfmt-version): Updated year. - -Fri Apr 16 04:48:03 1993 Noah Friedman (friedman@prep.ai.mit.edu) - - * makeinfo/makeinfo.c: Version 1.54 from bfox. - - * util/fixfonts: Replace instances of `[..]' with `test'. - Use more portable `test' arguments: `z$foo = z' instead of `! $foo'. - Robustify quoting in eval assignments. - (textfmdir, texpkdir, texgfdir): Don't override definition from - environment, if any. - Trap EXIT, SIGHUP, SIGINT, SIGQUIT, SIGTERM to delete temp files - instead of trying to remove them explicitly before calling exit. - When changing cwd, do so in subshell, in case various tex*dir - variables are relative. - Don't use `head', `dirname', or `basename'. These don't behave - consistently and/or don't even exist on some systems. They can - all be emulated with `sed' anyway. - (tempfile2_line1): New variable. Use it instead of running - process to extract first line out of tempfile2 multiple times. - Eliminate some gratuitous uses of $tempfile2, such as in for loops. - -Fri Mar 26 23:25:13 1993 Noah Friedman (friedman@prep.ai.mit.edu) - - * texinfo.texi: @setfilename texinfo.info. - - * makeinfo/makeinfo.c (reader_loop, end_insertion): Fix typos in - comments. - (handle_variable_internal): Handle the case that there further - menu text after a false ifset/ifclear. - - * util/texi2dvi: Version 0.4 - Replace all instances of `[ ... ]' with `test'. - Updated bug-reporting address. - -Thu Mar 25 12:31:30 1993 Noah Friedman (friedman@prep.ai.mit.edu) - - * info/Makefile.in (install): Install info.1 man page. - (uninstall): Remove installed info.1 man page. - - * info/infoman.texi: Standalone manual renamed to info-stnd.texi. - Makefile.in: Targets updated appropriately. - - * info/Makefile.in (LDEFS): New variable. Use it for info-local - macros, since DEFS will be inherited from parent make and any - local definitions will get clobbered. - - * info/RELEASE: Renamed to info/NEWS. - - * README: New file. - - * Makefile.in (topclean): New target. - - * Getting-started: Renamed to INTRODUCTION. Former name is too - long (over 14 chars). - - * New-features: Renamed to NEWS. - - * Makefile.in (MDEFINES): Set it. - - * Makefile.in (dist): Use --gzip option to tar to make sure - resulting file is compressed with gzip. Change tar file - extension from `.Z' to `.z'. - - * Makefile.in (DISTFILES): Filter out any file or directory names - starting with `='. - - * fixfonts: Moved to util/fixfonts. - - * RELEASE: Deleted. - - * makeinfo/Makefile.in (VPATH): Use $(srcdir), not @srcdir@. - (common): Use ../libtxi, not ../common. - (makeinfo.in): Run makeinfo with --no-split. - - * makeinfo/makeinfo.texi: Changes from bob. - - * util/Makefile.in (VPATH): Use $(srcdir), not @srcdir@. - (common): Use ../libtxi, not ../common. - - * util/fixfonts: Moved from top-level directory. - -Wed Mar 24 10:21:31 1993 Robert J. Chassell (bob at grackle) - - * emacs/texinfmt.el (texinfo-format-region): Do not require - `@setfilename' line; delete `\input texinfo' line if part of - region. - - * emacs/texinfmt.el (texinfo-raise-lower-sections): Raise or lower the - hierarchical level of chapters, sections, etc. according to - `@raisesections' and `@lowersections' commands. - -Thu Mar 18 16:02:27 1993 Robert J. Chassell (bob at grackle) - - * emacs/texinfo.el (texinfo-show-structure): Indent *Occur* buffer - according to the structure of the file. - -Sat Mar 6 05:16:44 1993 Noah Friedman (friedman@prep.ai.mit.edu) - - * util/texi2dvi: use ${1+"$@"}, not just "$@". - -Tue Feb 2 08:38:06 1993 Noah Friedman (friedman@prep.ai.mit.edu) - - * info/Makefile.in: Replace all "--nosplit" arguments to makeinfo - with "--no-split" - -Sun Jan 31 18:16:58 1993 Noah Friedman (friedman@prep.ai.mit.edu) - - * util/texi2dvi: Don't put .dvi and related auxillary files in same - directory as source files. Put them in current directory instead. - (TEXINPUTS_orig): New variable. - (file_texi): Variable removed. - (filename_texi): New variable. - (command_line_filename): Use this wherever references to file_texi - occured except in setting filename_noext. - (TEXINPUTS): Current directory and source directory where input - file resides prepended to standard path before invoking TeX. - -Wed Jan 27 16:24:37 1993 Noah Friedman (friedman@prep.ai.mit.edu) - - * util/Makefile.in: overhauled. - -Tue Jan 26 21:04:23 1993 Noah Friedman (friedman@prep.ai.mit.edu) - - * Makefile.in, info/Makefile.in, makeinfo/Makefile.in: Overhauled. - - * configure.in: Renamed from texinfo.in. - Incorporated makeinfo/makeinfo.in, info/info.in, and - util/util.in. Create all child Makefiles. - - * makeinfo/makeinfo.in, info/info.in: Deleted (incorporated into - top configure.in). - - * util/util.in: Deleted (incorporated into ../configure.in). - -Mon Jan 25 10:59:49 1993 Brian Fox (bfox@cubit) - - * info/info.c: New version 2.9; new variable INFO_PATCH_LEVEL - appears in the version string if it is non-zero. New function - version_string () produces the current version string, as in 2.8-p1. - - * info/dir.c: New file implements Gillespies `localdir' hacks. - - * info/nodes.c (info_get_node): Now calls maybe_build_dir_node () - if the file name to look for is "dir". - - * info/nodes.h: New flag N_CannotGC unconditionally prevents garbage - collection of a file buffer's contents. Used when "dir" is made - from at least one "localdir". - -Fri Jan 22 11:36:42 1993 Brian Fox (bfox@cubit) - - * info/footnotes.c: Do not declare auto_footnotes_p as "extern" in - this file. - -Thu Jan 21 08:57:08 1993 Brian Fox (bfox@cubit) - - * info/info.c: New version 2.8. - - * info/userdoc.texi, info/infoman.texi, info/info.texi: Fully - document Info; create both online and printed manual versions. - "userdoc.texi" contains exactly the documentation for GNU Info 2.x. - "infoman.texi" is a wrapper for that file; it is meant to produce - printed documentation. "info.texi" has the user documentation as a - complete chapter within itself, but continues to contain the Info - tutorial. - - * info/makedoc.c: Convert "ea_" into "echo_area_" when creating the - command name. - -Fri Jan 15 16:50:35 1993 Brian Fox (bfox@cubit) - - * info/search.c (skip_node_characters): New argument NEWLINES_OKAY if - non-zero says that newlines should be skipped over during parsing. - - * info/info-utils.c (info_parse_node): New argument NEWLINES_OKAY if - non-zero says that newlines should be skipped while parsing out - the nodename specification. - -Wed Jan 13 14:42:33 1993 Brian Fox (bfox@cubit) - - * info/makedoc.c: Remove "info_" from the front of the command name - before installing it. - - * info/session.c (info_menu_or_ref_item): A label of "Menu" is okay if - the builder is not info_menu_of_node (); - - * info/m-x.c: New function replace_in_documentation () replaces \\[foo] - with the keystrokes you type to get that command. Now used in - indices.c, info.c, infodoc.c. - -Mon Jan 11 10:27:41 1993 Brian Fox (bfox@cubit) - - * info/variables.c, h: New files contain describe-variable and stuff - moved out of m-x.c. - - * info/m-x.c: Move VARIABLE_ALIST and variable functions into - variables.c. Add documentation string to variable definition. - - * info/echo_area.c (push_echo_area): Zero the contents of - echo_area_completion_items after pushing the vars. - -Sat Jan 9 11:59:47 1993 Brian Fox (bfox@cubit) - - * info/Makefile.in: Add footnotes.c,h,o to the appropriate Makefile - variables. - - * info/window.c (window_tile_windows): New function divides the - available space among the visible windows. - - * info/session.c (info_tile_windows): New function calls - window_tile_windows. - - * info/footnotes.c, footnotes.h: New file implements functions for - aiding automatic footnote display when entering a node which has - footnotes. - - * info/m-x.c: New user-variable "automatic-footnotes". - - * info/window.c (window_physical_lines) New function counts the - carriage returns found in NODE. - -Wed Jan 6 11:24:19 1993 Brian Fox (bfox@cubit) - - * info/general.h: #include <unistd.h> if we have it. - -Tue Jan 5 11:12:33 1993 Brian Fox (bfox@cubit) - - * info/info-utils.c (info_concatenate_references): If either arg is - NULL, return the other arg. - - * info/indices.c (info_indices_of_file_buffer): Simplified and - corrected loop through tags/nodes of file buffer looking for - indices. - - * info/search.c (skip_node_characters): Rewrite "if" statement for - clarification and conciseness. - -Fri Jan 1 03:18:26 1993 Brian Fox (bfox@cubit) - - * info/info.in: Check for setvbuf (), and check to see whether the args - are reversed. - - * info/dribble.c (open_dribble_file) Check HAVE_SETVBUF and - SETVBUF_REVERSED when setting the buffering on info_dribble_file. - -Thu Dec 31 20:14:13 1992 Brian Fox (bfox@cubit) - - * info/session.c (info_select_reference) If the node couldn't be found, - look for the label as a filename (i.e., "(LABEL)Top"). - -Wed Dec 30 01:57:50 1992 Brian Fox (bfox@cubit) - - * New Version 2.7 Beta. - - * info/echo_area.c: Numerous functions now do something with the - numeric argument. Kill ring implemented, as well as yank and - yank_pop. Also transpose-chars. - - * info/window.c (window_make_modeline): Check node->flags for - N_IsCompressed and display "zz" in the modeline if the node comes - from a file which is compressed on disk. - -Mon Dec 28 17:33:12 1992 Brian Fox (bfox@cubit) - - * info/filesys.c, info/nodes.c: New member of FILE_BUFFER "FILESIZE" - contains the size of file_buffer->contents. finfo.st_size is no - longer relied upon to read the contents of files, since the new - function (filesys_read_info_file) can read compressed files. - - * info/filesys.c (info_find_fullpath) If a file starts with a slash (or - tilde expansion causes it to start with a slash) still call - info_find_file_in_path () on it so that we can find files with - compression suffixes. - - * info/m-x.c: New variable "gc-compressed-files". - -Tue Dec 22 03:45:28 1992 Brian Fox (bfox@cubit) - - * info/info.c: Version 2.6 Beta. - - * info/indices.c (info_index_next): Improve the final search for the - matched index entry. - - * info/session.c (move_to_screen_line): New function implements `M-r'. - Given a numeric argument, move point to the start of that line in - the current window; without an arg, move to the center line. - * infomap.c: Put move_to_screen_line () on `M-r'. - - * info/nodes.c (adjust_nodestart): Don't set N_UpdateTags unless the - node came from a tags table. - - * info/nodes.c (info_find_file_internal): If the filename being looked - for doesn't start with a `/', then additionally compare the - filename against the fullpath of the file buffer sans the - directory name. This can happen when selecting nodemenu items. - -Mon Dec 21 10:07:18 1992 Brian Fox (bfox@cubit) - - * info/session.c, info/display.c: Remove all references to - active_window_ch, active_window_cv, cursor_h, and cursor_v. The - single function display_cursor_at_point () is used for all cursor - movement, and to place the terminal's cursor at the right location - on the screen. - -Sat Dec 19 12:01:33 1992 Brian Fox (bfox@cubit) - - * info/nodemenu.c: New file implements a few functions for manipulating - previously visited nodes. `list-visited-nodes' produces a menu of - the nodes that could be reached by info_history_node () in some - window. `select-visited-node' is similar to `list-visited-node' - followed by `info-menu-item', but doesn't display a window with - the visited nodes menu. - - * info/session.c (info_numeric_arg_digit_loop): If redisplay had been - interrupted, then redisplay all of the windows while waiting for - input. - - * info/display.c (display_was_interrupted_p): New variable keeps track - of interrupted display. Used in - info/session.c:info_numeric_arg_digit_loop (). - - * info/session.c (info_global_next, info_global_prev): Use the numeric - argument passed to determine how many nodes to move. - - * info/session.c (info_scroll_forward, info_scroll_backward): If the - invoking key is not SPC or DEL only do Page Only scrolling. - -Thu Dec 17 01:34:22 1992 Brian Fox (bfox@cubit) - - * info/display.c (display_update_one_window): Allow W_NoWrap to affect - window display. - - * info/window.c (calculate_line_starts): Now takes a WINDOW * as an - argument, and simply does the calculation, placing the results - into window->line_starts and window->line_count. It also handles - W_NoWrap in window->flags. - -Mon Dec 14 02:18:55 1992 Brian Fox (bfox@cubit) - - * info/session.c (info_backward_scroll): Don't try to get previous node - if the top of the node isn't currently being displayed. - - * info/window.c (window_adjust_pagetop) Use new variable - "window_scroll_step" to attempt to control the amount which the - window scrolls. - - * info/m-x.c (info_variables) Add "scroll-step" to the list. - -Thu Dec 10 08:52:10 1992 Brian Fox (bfox@cubit) - - * info/m-x.c: New variable entry show-index-matches. When set to - non-zero the matched portion of the search string is indicated - with ` and '. Perhaps I should use `|' inst|ea|d? - - * info/echo_area.c (ea_possible_completions): Always build completions - before checking to see how many there were. - - * info/info-utils.c: (info_concatenate_references): New utility - function concatenates references. - - * info/Makefile.in: Add indices.c and indices.h to SRCS and HDRS. - Add indices.c to CMDFILES. - - * info/indices.c, info/indices.h: New file implements `i' and `,' - commands of info, and provides index searching capabilities. - - * info/echo_area.c (info_read_completing_in_echo_area): Split off into - separate callable function info_read_completing_internal (). - - * info/echo_area.c (info_read_maybe_completing): New function calls - info_read_completing_internal () with non-forcing argument. - - * info/session.c: Rename down_next_upnext_or_error () and - prev_up_or_error () to forward_move_node_structure (), and - backward_move_node_structure (). Implement new commands - info_global_next () and info_global_prev (). - - * info/infomap.c (initialize_info_keymaps): Bind `[' and `]' to - backward_, forward_move_node_structure () respectively. - - * info/session.c (info_menu_digit): Called with "0" as arg, select the - last menu item. - - * info/infomap.c (initialize_info_keymaps): "0" calls - info_menu_digit (). - - * info/session.c (info_move_to_xref): Take dir into account when there - are xrefs and menu items in the node and we are wrapping - backwards. - -Tue Dec 8 09:57:58 1992 Brian Fox (bfox@cubit) - - * info/info.c: Version 2.5 Beta. - - * info/terminal.c (terminal_insert_lines, terminal_delete_lines) Do not - expect tgoto to return a new string; it returns the address of a - static buffer. - - * info/infodoc.c (info_find_or_create_help_window) Correct check for - prior existing help node. - - * info/m-x.c (set_variable): Allow variables to have a list of choices. - Add new variable scroll-behaviour. - - * info/session.c (down_next_upnext_or_error, prev_up_or_error) New - functions implement user-controlled behaviour when attempting to - scroll past the bottom or top of a node. New variable - info_scroll_behaviour is user visible as "scroll-behaviour". - - * info/session.c (info_scroll_forward, info_scroll_backward) Call new - functions for user-controlled scroll behaviour. - - * info/terminal.c (terminal_initialize_terminal) Set PC from BC not - from BUFFER. - -Mon Dec 7 11:26:12 1992 Brian Fox (bfox@cubit) - - * util/texindex.c: Change EXIT_SUCCESS and EXIT_FATAL to TI_NO_ERROR - and TI_FATAL_ERROR respectively. This avoids namespace conflicts - on NeXT 2.0. - -Sat Dec 5 00:07:59 1992 Brian Fox (bfox@cubit) - - * info/info.c: New option "--subnodes" says to recursively dump the - menus of the nodes that you wish to dump. Menu items which point - to external nodes are not dumped, and no node is dumped twice. - -Thu Dec 3 16:11:02 1992 Brian Fox (bfox@cubit) - - * info/session.c (info_error) Don't ring the bell if - info_error_rings_bell_p is zero. (info_abort_key) Ring the bell - if printing "Quit" in the echo area wouldn't do it. - - * info/m-x.c (set_variable) New functions allows setting of - variables in the echo area. Currently, only visilble-bell and - errors-ring-bell are implemented. - -Wed Dec 2 13:11:37 1992 Brian Fox (bfox@cubit) - - * info/nodes.c, info/makedoc.c: If O_RDONLY is not defined by - sys/file.h, include sys/fcntl.h. - - * info/filesys.c (info_file_in_path): Expand leading tildes found - within directory names. - - * info/terminal.c (terminal_initialize_terminal) Set ospeed to 13 if - not settable any other way. It is an index into an array of - output speeds. - - * info/display.c (free_display) Do not free a NULL display. - - * info/display.c (string_width): New functions returns the width of - STRING when printed at HPOS. - -Sun Nov 29 01:24:42 1992 Brian Fox (bfox@cubit) - - * info/info.c: New version 2.4 beta. - - * info/general.h: #define info_toupper and info_tolower which check - their arguments before performing any conversion. - - * info/search.c, info/echo_area.c: Use info_toupper. - -Sat Nov 28 14:23:24 1992 Brian Fox (bfox@cubit) - - * info/session.c (info_scroll_forward, info_scroll_backward) If at - last/first page of the node, and the last command was - forward/backward, do info_next/prev/_node. - - * info/session.c: New function info_select_reference_this_line gets - menu or cross reference immediately. - - * info/infomap.c (initialize_info_keymaps): Add info_keymap[LFD] to - invoke info_select_reference_this_line (). - - * info/session.c (info_last_reference) Rename to - info_history_reference. Wrote info_last_reference, and - info_first_reference which go to the last or first node of an info - file. - -Fri Nov 27 00:59:02 1992 Brian Fox (bfox@cubit) - - * info/info.c: New version 2.3. Completed implementing contents of - TODO file. - - * info/session.c (info_redraw_display): Fix C-l with numeric arg. - -Thu Nov 26 20:14:18 1992 Brian Fox (bfox@cubit) - - * info/m-x.c: New file implements reading named commands in the echo - area, along with a new function "info-set-screen-height". - Compilation of this file and some code in others controlled by the - Makefile variable NAMED_COMMANDS (set to -DNAMED_COMMANDS). - - * info/window.c (window_new_screen_size) Rewrite from scratch, allowing - clean growth and shrinkage of the screen. New variable - window_deletion_notifier is a pointer to a function to call when - the screen changes size, and some windows have to get deleted. - The function is called with the window to be deleted as an - argument, and it should clean up dangling references to that - window. - - * info/session.c (initialize_info_session): Set - window_deletion_function to forget_window_and_nodes. - - * info/display.c (display_update_one_window): If the first row of the - window to display wouldn't appear in the_screen, don't try to - display it. This happens when the screen has been made - unreasonably small, and we attempt to display the echo area. - -Tue Nov 24 00:47:20 1992 Brian Fox (bfox@cubit) - - * Release Info 2.2. - - * info/session.c: New functions implement reading typeahead and - implement C-g flushing typed ahead characters. - (info_search_internal): allows C-g to exit multi-file searches. - -Mon Nov 23 01:53:35 1992 Brian Fox (bfox@cubit) - - * info/nodes.c: Remove calls to sscanf (), replacing them with calls to - atol (), since that is much faster. - (get_nodes_of_tags_table) Only check for "(Indirect)" if we - haven't parsed any nodes out of the tags table. Increase the - amount that file_buffer->nodes grows to 100 from 50. These two - together sufficiently speed up the parsing process. - - * info/nodes.c: info_get_node_of_file_buffer_tags (), - info_get_node_of_file_buffer_nodes (): Search the appropriate list - and return a node. This was simply a cut and paste edit to - functionalize the code. - - * info/TODO: Remove suggestion for partial tag parsing, since tag - parsing is much faster now. - -Sat Nov 21 02:48:23 1992 Brian Fox (bfox@cubit) - - * info/makedoc.c: New File replaces makedoc.sh shell script. - - * info/infomap.c: Install info_isearch (on C-s) and - info_reverse_isearch (on C-r) for Info windows. - - * info/session.c (incremental_search, info_isearch, - info_reverse_isearch) New functions implement incremental - searching. - -Fri Nov 20 00:01:35 1992 Brian Fox (bfox@cubit) - - * info/terminal.c (terminal_initialize_terminal): Declare and set up - `ospeed'. Turn off C-s and C-q processing. - - * info/session.c (info_show_point) When this function is called, the - desired result is to show the point immediately. So now it calls - set_window_pagetop () if the new pagetop is not the same as the - old one. This means that info_prev_line (), info_next_line (), - info_forward_word (), and info_backward_word () can all scroll the - window if they have to. - -Thu Nov 19 12:27:07 1992 Brian Fox (bfox@cubit) - - * info/session.c (set_window_pagetop): Add scrolling to make this - faster. - - * info/echo_area.c (push/pop_echo_area): Remember the list of items to - complete over. - - * info/session.c (info_forward_char): Don't let point get equal to - nodelen, only to nodelen - 1. - - * info/display.c: New function display_scroll_display () scrolls the - rmembered display as well as the text on the actual display. - - * info/terminal.c: New functions terminal_scroll_terminal (), - terminal_scroll_down (), and terminal_scroll_up (). All - implemented using "al" and "dl" termcap capabilities. (i.e., - insert and delete line). - -Wed Nov 18 15:05:14 1992 Brian Fox (bfox@cubit) - - * info/termdep.h: Only define HAVE_FCNTL_H if !aix and !ultrix. - -Tue Nov 17 20:35:08 1992 Brian Fox (bfox@cubit) - - * First Beta Release of Info 2.0. - -Sun Nov 1 02:21:05 1992 Noah Friedman (friedman@prep.ai.mit.edu) - - * util/texi2dvi (--force): Option removed. Always run tex at least - once, don't bother checking if .dvi file is newer than source. - -Fri Oct 30 02:16:28 1992 Noah Friedman (friedman@prep.ai.mit.edu) - - * util/texi2dvi (-D): debugging option renamed from '-d'. - Made check to enable debugging more terse. - When checking if index files have changed, use - variable $this_file instead of $file in for loop. - (file_texi): wherever the variable $file was used to reference - the texinfo file, substituted $file_texi. - -Sat Oct 17 07:30:34 1992 Brian J. Fox (bfox@helios) - - * util/texindex.c: Remove references to USG replacing them with a - define declaring the actual feature required or missing. - -Thu Oct 15 16:17:47 1992 Robert J. Chassell (bob@nutrimat.gnu.ai.mit.edu) - - * emacs/texinfmt.el (texinfo-format-setfilename): Remove date from - Info file header so regression testing is easier. - -Tue Sep 15 16:28:35 1992 Robert J. Chassell (bob at grackle) - - * emacs/texinfmt.el (texinfmt-version): New variable. - (texinfo-format-setfilename): Include date and - version in Info file header. - Better documentation for @definfoenclose - Handle whitespace after @end iftex, etc. - -Thu Sep 3 09:25:37 1992 Robert J. Chassell (bob at grackle) - - * emacs/texnfo-upd.el: Fix typo re `texinfo-sequential-node-update.' - -Tue Aug 18 08:56:24 1992 Robert J. Chassell (bob at grackle) - - * emacs/texinfmt.el (texinfo-value): Revise syntax. - - * emacs/texnfo-upd.el (texinfo-start-menu-description): - New function to insert title as description in a menu. - (texinfo-make-menu-list): Remove automatic title insertion. - - * emacs/texinfo.el (texinfo-mode-map): Add keybinding for - texinfo-start-menu-description. - -Wed Jul 29 11:58:53 1992 Robert J. Chassell (bob at grackle) - - * emacs/texinfmt.el (texinfo-set): Revise to set a string to the flag. - (texinfo-value): @value{flag}: New command which inserts the - string to which the flag is set. - -Tue Jul 7 15:10:52 1992 Robert J. Chassell (bob at grackle) - - * emacs/texnfo-upd.el (texinfo-master-menu): Error message if file - contains too few nodes for a master menu. - (texinfo-insert-master-menu-list): Only attempt to insert detailed - master menu if there is one. - -Wed Jun 10 15:26:18 1992 Robert J. Chassell (bob at grackle) - - * emacs/texinfmt.el (texinfo-append-refill): Refill properly when lines - begin with within-paragraph @-commands. - -Tue Jun 9 12:28:11 1992 Robert J. Chassell (bob at grackle) - - * emacs/texinfmt.el: Add `texinfo-deffn-formatting-property' and - `texinfo-defun-indexing-property' to @deffn commands. - -Mon Jun 8 11:52:01 1992 Robert J. Chassell (bob at grackle) - - * emacs/texnfo-upd.el: Replace `(mark-whole-buffer)' with - `(push-mark (point-max) t) (goto-char (point-min))' - to avoid `Mark set' messages. - -Fri Jun 5 15:15:16 1992 Robert J. Chassell (bob@kropotkin.gnu.ai.mit.edu) - - * emacs/texnfo-upd.el (texinfo-check-for-node-name): Offer section - title as prompt. - (texinfo-copy-next-section-title): Copy title correctly. - -Thu May 28 20:34:17 1992 Robert J. Chassell (bob@hill.gnu.ai.mit.edu) - - * emacs/texinfmt.el: @vtable defined, parallel to @ftable, for - variables. - (texinfo-append-refill): set case-fold-search nil so @TeX is not - confused with @tex. - -Thu Mar 26 21:36:41 1992 Robert J. Chassell (bob@kropotkin.gnu.ai.mit.edu) - - * emacs/makeinfo.el: Rename temp buffer from `*Makeinfo*' back to - `*compilation*' so `next-error' works; unfortunately, - `*compilation*' is written into the code as the name - `next-error' needs. - Rename `makeinfo-recenter-makeinfo-buffer' back to - `makeinfo-recenter-makeinfo-buffer' - -Thu May 14 21:14:25 1992 Noah Friedman (friedman@prep.ai.mit.edu) - - * util/fixfonts: Enclosed most variable references with "" to prevent - potential globbing and other weirdness. Eliminated uses of - ${var-value}, which unfortunately isn't portable. - - * util/texi2dvi: rewritten from scratch. - -Sat Apr 18 23:46:25 1992 Charles Hannum (mycroft@hal.gnu.ai.mit.edu) - - * util/fixfonts: Re-evaluate prefix and libdir if inherited (to resolve - variable references from make). - (texlibdir): Don't add '/tex', since it's already there. - -Fri Apr 10 14:51:23 1992 Noah Friedman (friedman@prep.ai.mit.edu) - - * util/fixfonts: set prefix and libdir only if they are not already - defined (i.e. not inherited from the environment). - Changed default path for libdir to be consistent with Makefile. - -Tue Mar 3 13:17:42 1992 Robert J. Chassell (bob at grackle) - - * emacs/texnfo-upd.el (texinfo-insert-master-menu-list): Insert a - master menu only after `Top' node and before next node. - (texinfo-copy-menu): Error message if menu empty. - -Mon Feb 24 15:47:49 1992 Robert J. Chassell (bob at grackle) - - * emacs/texinfmt.el (texinfo-format-region): Make sure region ends in a - newline. - (texinfo-itemize-item): Recognize all non-whitespace on same line - as @item command. - -Sat Feb 22 02:15:00 1992 Brian Fox (bfox at gnuwest.fsf.org) - - * util/texindex.c: New version 1.45 has cleanups, should compile under - VMS quietly. - -Wed Feb 12 10:50:51 1992 Robert J. Chassell (bob at grackle) - - * emacs/makeinfo.el: Rename temp buffer as *Makeinfo*. - Rename `makeinfo-recenter-compilation-buffer'. - (makeinfo-buffer): Offer to save buffer if it is modified. - (makeinfo-compile): Do not offer to save other buffers. - (makeinfo-compilation-sentinel): Switch to Info file. - -Tue Feb 4 13:07:39 1992 Robert J. Chassell (bob at grackle) - - * emacs/texinfmt.el (texinfo-print-index): Format so that node names in - the index are lined up. - -Mon Feb 3 09:08:14 1992 Robert J. Chassell (bob at grackle) - - * emacs/texinfmt.el (texinfo-itemize-item): Format entry when text - is on the same line as @item command. Also, handle @-commands. - (texinfo-format-region, texinfo-format-buffer-1): Set fill column - to local value of Texinfo buffer. - - * emacs/texnfo-upd.el (texinfo-pointer-name): Find only those - section commands that are accompanied by `@node' lines. - -Tue Jan 14 16:10:16 1992 Robert J. Chassell (bob at grackle) - - * emacs/texnfo-upd.el: Ensure that no commands depend on the value of - case-fold-search. - -Fri Jan 10 15:13:55 1992 Robert J. Chassell (bob at kropotkin) - - * emacs/texinfmt.el (texinfo-append-refill): Replace use of - unsupported function `looking-at-backward' with - `re-search-backward'. - -Mon Dec 23 23:46:42 1991 David J. MacKenzie (djm at wookumz.gnu.ai.mit.edu) - - * util/texindex.c: Change POSIX ifdefs to HAVE_UNISTD_H and - _POSIX_VERSION. - -Mon Dec 16 15:01:36 1991 Robert J. Chassell (bob at grackle) - - * emacs/texinfmt.el (texinfo-append-refill): New function appends - @refill to all appropriate paragraphs so you no longer need to - append @refill command yourself. - (texinfo-format-region, texinfo-format-buffer-1, - texinfo-format-include): Call `texinfo-append-refill'. - -Fri Dec 6 01:25:09 1991 David J. MacKenzie (djm at wookumz.gnu.ai.mit.edu) - - * util/texindex.c: Conditionalize on _AIX (which is predefined) instead - of AIX, just like makeinfo does. - -Tue Nov 26 10:21:04 1991 Robert J. Chassell (bob at grackle) - - * emacs/texnfo-upd.el (texinfo-section-types-regexp): `@subtitle' no - longer treated as subsection. - -Sat Nov 16 08:27:42 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) - - * util/fixfonts: New file, from Karl Berry. - -Tue Nov 12 16:13:24 1991 Robert J. Chassell (bob at grackle) - - * emacs/texinfmt.el: Create @end smalllisp. - -Mon Nov 11 16:50:13 1991 Robert J. Chassell (bob at grackle) - - * emacs/texinfo.el (texinfo-environment-regexp): Add all other block - enclosing Texinfo commands. - -Thu Nov 7 10:23:51 1991 Robert J. Chassell (bob at grackle) - - * emacs/texinfo.el (texinfo-insert-@end): Attempt to insert correct end - command statement, eg, @end table. Fails with nested lists. - (texinfo-insert-*): Accept prefix arg to surround following N - words with braces for command. - -Thu Oct 31 21:31:41 1991 Robert J. Chassell (bob at kropotki) - - * emacs/texinfmt.el (texinfo-clear): Clear flag even if flag not - previously set. - -Wed Oct 23 11:15:58 1991 Robert J. Chassell (bob at grackle) - - * emacs/texinfo.el (texinfo-mode): page-delimiter now finds top node as - well as chapters. - -Tue Oct 22 11:46:12 1991 Robert J. Chassell (bob at grackle) - - * emacs/texinfmt.el (texinfo-do-flushright): Test whether a line is too - long for the flush right command (line length must be less than - the value of fill column). - - * emacs/texnfo-tex.el (texinfo-tex-buffer): Prompt for original file - even if point moved to *texinfo-tex-shell*. - texinfo-tex-original-file: variable to hold file name. - -Wed Oct 16 08:32:05 1991 Robert J. Chassell (bob at grackle) - - * emacs/texinfmt.el (texinfo-format-center): Expand string before - centering so @-commands not included. - -Thu Oct 10 22:01:47 1991 Robert J. Chassell (bob at kropotki) - - * emacs/texnfo-tex.el (texinfo-show-tex-print-queue): Do not kill a - running process; do start a process none exists. - -Thu Sep 26 21:58:47 1991 Robert J. Chassell (bob at kropotki) - - * util/texi2dvi: Misc. bugs fixed. - - * emacs/texinfo.el: Remove extraneous references to TeX. - -Thu Sep 19 20:45:29 1991 Robert J. Chassell (bob at kropotki) - - * emacs/texinfmt.el: add @cartouche as a noop (makes box with rounded - corners in TeX) - -Tue Sep 10 20:44:57 1991 Robert J. Chassell (bob at grackle) - - * emacs/texnfo-upd.el (texinfo-make-one-menu): Copy node-name correctly - for message. - -Thu Aug 29 17:54:07 1991 Robert J. Chassell (bob at kropotki) - - * emacs/texnfo-tex.el (texinfo-quit-tex-job): Do not set mark. - -Wed Aug 21 10:36:21 1991 Robert J. Chassell (bob at grackle) - - * emacs/texnfo-upd.el: (texinfo-copy-menu-title): Copy title as it - should rather than node line. - -Mon Aug 5 15:27:12 1991 Robert J. Chassell (bob at grackle) - - * emacs/texinfmt.el (texinfo-format-convert): Changed regexp that - looks for three hyphens in a row to find those between word - constituent characters, as now, for Oxford Univ. style dashes and - also between spaces, for Cambridge Univ. Press style dashes. - - * emacs/texnfo-tex.el (texinfo-tex-start-shell): Runs "/bin/sh" so - `explicit-shell-file-name' is not set globally. - - * emacs/texnfo-upd.el: Rewrite messages. - (texinfo-find-higher-level-node): Stop search at limit. - (texinfo-copy-menu-title): Rewrite to handle outer include files. - (texinfo-multi-file-update): Update all nodes properly; - rewrite doc string and interactive. - -Sat Aug 3 10:46:13 1991 Robert J. Chassell (bob at grackle) - - * emacs/texnfo-upd.el (texinfo-all-menus-update): Fixed typo that - caused the function to create a master menu when it shouldn't. - - * emacs/texinfo.el (texinfo-mode): Make `indent-tabs-mode' a local - variable and set to nil to prevent TABs troubles with TeX. - -Wed Jul 31 11:07:08 1991 Robert J. Chassell (bob at grackle) - - * emacs/texnfo-tex.el (texinfo-quit-tex-job): New function: quit - currently running TeX job, by sending an `x' to it. - (texinfo-tex-shell-sentinel): New function to - restart texinfo-tex-shell after it is killed. - (texinfo-kill-tex-job): Rewrite to use kill-process rather than - quit-process; uses `texinfo-tex-shell-sentinel' to restart - texinfo-tex-shell after it is killed. - (texinfo-tex-region, texinfo-tex-buffer): Replace - texinfo-kill-tex-job with quit-process. - - * emacs/texinfo.el (texinfo-define-common-keys): Add keybinding for - texinfo-quit-tex-job - -Wed Jul 10 15:15:03 1991 Robert J. Chassell (bob at grackle) - - * emacs/texinfmt.el: New commands @set, @clear, @ifset...@end - ifset, and @ifclear...@end ifclear. - Definition functions rewritten to make them easier to - maintain. - -Wed Jul 3 19:37:04 1991 Robert J. Chassell (bob at kropotki) - - * emacs/texinfmt.el (texinfo-format-deftypefn-index): Remove reference - to data-type to make consistent with texinfo.tex and makeinfo. - texinfo.el: Fix page-delimiter and texinfo-chapter-level-regexp - variables. - -Thu Jun 27 18:35:36 1991 Robert J. Chassell (bob at nutrimat) - - * emacs/texinfmt.el: Add @dmn as `texinfo-format-noop'. - texinfo2.texi: Document @dmn. - texinfmt.el (texinfo{,-end}-{eleterate,ecapitate} renamed - {alphaenumerate, capsenumerate}. - -Fri Jun 14 12:46:32 1991 Robert J. Chassell (bob at churchy.gnu.ai.mit.edu) - - * emacs/texinfmt.el (texinfo-format-defun-1): @defivar prints name - correctly. - -Thu Jun 6 21:38:33 1991 Robert J. Chassell (bob at churchy.gnu.ai.mit.edu) - - * emacs/texinfo.el (texinfo-mode): Set page delimiter to - 'texinfo-chapter-level-regexp' so that page commands work by - chapter or equivalent. - - * emacs/texinfmt.el (texinfo-format-defun-1): @defop prints name - correctly. - (batch-texinfo-format): replace unsupported - 'buffer-disable-undo' with 'buffer-flush-undo' - -Fri Apr 5 15:17:17 1991 Robert J. Chassell (bob at wookumz.gnu.ai.mit.edu) - - * emacs/makeinfo.el (makeinfo-compilation-sentinel): Check for - existance of makeinfo-temp-file to avoid harmless error message. - texinfo2.texi: Minor typos fixed. - -Thu Mar 28 19:13:24 1991 Robert J. Chassell (bob at pogo.gnu.ai.mit.edu) - - * util/texi2dvi: Revised. - -Mon Mar 11 12:35:51 1991 Robert J. Chassell (bob at grackle) - - * emacs/texinfmt.el: (@footnotestyle): New command to set - footnotestyle. - (@paragraphindent): New command to set indentation. - (texinfo-format-refill): Add indentation feature so as to - indent paragraph or leave indentation asis before refilling - according to value set by @paragraphindent command. - (texinfo-format-region): Insert header, if any, into Info buffer. - (texinfo-format-separate-node, texinfo-format-end-node): Run - texinfo-format-scan on footnote text only once. - (texinfo-format-scan): Shorten `---' to `--'. - - * emacs/texinfo.el: Define key for `texinfo-master-menu'; define - start and end of header expressions. - - * emacs/texnfo-upd.el (texinfo-all-menus-update): Update - pre-existing master menu, if there is one. - -Fri May 11 14:36:07 1990 Richard Stallman (rms at sugar-bombs.ai.mit.edu) - - * util/texindex.c: Rename `lines' to `nlines'. - (bzero): Pass arg to lib$movc5 through non-register var. - (perror_with_file, pfatal_with_file): Move extern decls and includes - to top of file. - [VMS]: If not using VMS C, define away `noshare' keyword. - Include perror.h. - -Mon Jul 11 18:02:29 1988 Chris Hanson (cph at kleph) - - * util/texindex.c (indexify): when comparing to initial strings to - decide whether to change the header, must use `strncmp' to avoid - comparing entire strings of which initials are a substring. - -Sun Jun 26 18:46:16 1988 Richard Stallman (rms at sugar-bombs.ai.mit.edu) - - * util/texindex.c (sort_in_core, sort_offline, parsefile): - Give up on input file if any line doesn't start with backslash. |