1 files changed, 0 insertions, 105 deletions
diff --git a/contrib/ntp/html/hints/parse b/contrib/ntp/html/hints/parse
deleted file mode 100644
index d2523515e839..000000000000
--- a/contrib/ntp/html/hints/parse
+++ /dev/null
@@ -1,105 +0,0 @@
-Compilation:
-	Usual thing: rm -f Config.local ; make for vanilla
-			make refconf for reference clock (e. g. DCF77)
-
-Directory contents:
-
-	hints/PARSE	- this file
-
-	xntpd/refclock_parse.c
-			- reference clock support for DCF77/GPS in xntp
-	parse/parse.c
-			- Reference clock data parser framework
-	parse/parse_conf.c
-			- parser configuration (clock types)
-	parse/clk_meinberg.c
-			- Meinberg clock formats (DCF U/A 31, PZF 535, GPS166)
-	parse/clk_schmid.c
-			- Schmid receiver (DCF77)
-	parse/clk_rawdcf.c
-			- 100/200ms pulses via 50 Baud line (DCF77)
-	parse/clk_dcf7000.c
-			- ELV DCF7000 (DCF77)
-	parse/clk_trimble.c
-			- Trimble SV6 GPS receiver
-
-			  If you want to add new clock types please check
-			  with kardel@informatik.uni-erlangen.de. These files
-			  implement the conversion of RS232 data streams into
-			  timing information used by refclock_parse.c which is
-			  mostly generic except for NTP configuration constants.
-
-	parse/Makefile.kernel
-			- *SIMPLE* makefile to build a loadable STREAMS
-			  module for SunOS 4.x / SunOS 5.x systems
-
-	parse/parsestreams.c
-			- SUN Streams module (loadable) for radio clocks
-			  This streams module is designed for SunOS 4.1.X.
-
-	parse/parsesolaris.c
-			- SUN Streams module (loadable) for radio clocks.
-			  This streams module is designed for SunOS 5.x
-			  Beware this is still new - so it might crash
-			  your machine (we have seen it working, though).
-
-	parse/parsetest.c
-			- simple test program for STREAMS module. Its so simple,
-			  that it doesn't even set TTY-modes, thus they got to
-			  be correct on startup - works for Meinberg receivers
-
-	parse/testdcf.c
-			- test program for raw DCF77 (100/200ms pulses)
-			  receivers
-
-        include/parse.h - interface to "parse" module and more
-        include/parse_conf.h
-			- interface to "parse" configuration
-
-	include/sys/parsestreams.h
-			- STREAMS specific definitions
-
-	scripts/support
-			- scripts (perl & sh) for statistics and rc startup
-			  the startup scripts are used in Erlangen for
-			  starting the daemon on a variety of Suns and HPs
-			  and for Reference Clock startup on Suns
-			  These scripts may or may not be helpful to you.
-
-Supported clocks:
-	Meinberg DCF U/A 31
-	Meinberg PZF535/TCXO	(Software revision PZFUERL 4.6)
-	Meinberg PZF535/OCXO	(Software revision PZFUERL 4.6)
-	Meinberg GPS166		(Software version for Uni-Erlangen)
-	ELV DCF7000		(not recommended - casual/emergency use only)
-	Conrad DCF77 receiver	(email: time@informatik.uni-erlangen.de)
-	  + level converter
-	TimeBrick		(email: time@informatik.uni-erlangen.de)
-	Schmid Receiver Kit
-	Trimble SV6 GPS receiver
-
-Addresses:
-  Meinberg Funkuhren
-  Auf der Landwehr 22
-  31812 Bad Pyrmont
-  Germany
-  Tel.: 05281/20 18
-  FAX:  05281/60 81 80
-
-  ELV Kundenservice
-  Postfach 1000
-  26787 Leer
-  Germany
-  Tel.: 0491/60 08 88
-
-  Walter Schmidt
-  Eichwisrain 14
-  8634 Hombrechtikon
-  Switzerland
-
-If you have problems mail to:
-
-	time@informatik.uni-erlangen.de
-
-We'll help (conditions permitting)
-