diff options
Diffstat (limited to 'contrib/binutils/gas/doc/Makefile.in')
| -rw-r--r-- | contrib/binutils/gas/doc/Makefile.in | 637 |
1 files changed, 637 insertions, 0 deletions
diff --git a/contrib/binutils/gas/doc/Makefile.in b/contrib/binutils/gas/doc/Makefile.in new file mode 100644 index 000000000000..cd9dad2baaf8 --- /dev/null +++ b/contrib/binutils/gas/doc/Makefile.in @@ -0,0 +1,637 @@ +# Makefile.in generated by automake 1.9.6 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +top_builddir = .. +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = @INSTALL@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +target_triplet = @target@ +subdir = doc +DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/../bfd/warning.m4 $(top_srcdir)/../libtool.m4 \ + $(top_srcdir)/../gettext.m4 $(top_srcdir)/configure.in +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +depcomp = +am__depfiles_maybe = +SOURCES = +INFO_DEPS = $(srcdir)/as.info +TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex +am__TEXINFO_TEX_DIR = $(top_srcdir)/../texinfo +DVIS = as.dvi +PDFS = as.pdf +PSS = as.ps +HTMLS = as.html +TEXINFOS = as.texinfo +TEXI2PDF = $(TEXI2DVI) --pdf --batch +MAKEINFOHTML = $(MAKEINFO) --html +AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS) +DVIPS = dvips +man1dir = $(mandir)/man1 +am__installdirs = "$(DESTDIR)$(man1dir)" +NROFF = nroff +MANS = $(man_MANS) +ACLOCAL = @ACLOCAL@ +ALLOCA = @ALLOCA@ +ALL_OBJ_DEPS = @ALL_OBJ_DEPS@ +AMDEP_FALSE = @AMDEP_FALSE@ +AMDEP_TRUE = @AMDEP_TRUE@ +AMTAR = @AMTAR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +BFDLIB = @BFDLIB@ +BFDVER_H = @BFDVER_H@ +CATALOGS = @CATALOGS@ +CATOBJEXT = @CATOBJEXT@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DATADIRNAME = @DATADIRNAME@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +GDBINIT = @GDBINIT@ +GMOFILES = @GMOFILES@ +GMSGFMT = @GMSGFMT@ +GT_NO = @GT_NO@ +GT_YES = @GT_YES@ +INCLUDE_LOCALE_H = @INCLUDE_LOCALE_H@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INSTOBJEXT = @INSTOBJEXT@ +INTLDEPS = @INTLDEPS@ +INTLLIBS = @INTLLIBS@ +INTLOBJS = @INTLOBJS@ +LDFLAGS = @LDFLAGS@ +LEX = @LEX@ +LEXLIB = @LEXLIB@ +LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ +LIBM = @LIBM@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ +MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ +MAKEINFO = @MAKEINFO@ +MKINSTALLDIRS = @MKINSTALLDIRS@ +MSGFMT = @MSGFMT@ +NO_WERROR = @NO_WERROR@ +OBJEXT = @OBJEXT@ +OPCODES_LIB = @OPCODES_LIB@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +POFILES = @POFILES@ +POSUB = @POSUB@ +RANLIB = @RANLIB@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@ +USE_NLS = @USE_NLS@ +VERSION = @VERSION@ +WARN_CFLAGS = @WARN_CFLAGS@ +XGETTEXT = @XGETTEXT@ +YACC = @YACC@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_RANLIB = @ac_ct_RANLIB@ +ac_ct_STRIP = @ac_ct_STRIP@ +am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ +am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +atof = @atof@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +cgen_cpu_prefix = @cgen_cpu_prefix@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +exec_prefix = @exec_prefix@ +extra_objects = @extra_objects@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +install_tooldir = @install_tooldir@ +l = @l@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +obj_format = @obj_format@ +oldincludedir = @oldincludedir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +sysconfdir = @sysconfdir@ +target = @target@ +target_alias = @target_alias@ +target_cpu = @target_cpu@ +target_cpu_type = @target_cpu_type@ +target_os = @target_os@ +target_vendor = @target_vendor@ +te_file = @te_file@ +AUTOMAKE_OPTIONS = 1.8 cygnus + +# What version of the manual you want; "all" includes everything +CONFIG = all + +# Options to extract the man page from as.texinfo +MANCONF = -Dman +TEXI2POD = perl $(BASEDIR)/etc/texi2pod.pl $(AM_MAKEINFOFLAGS) +POD2MAN = pod2man --center="GNU Development Tools" \ + --release="binutils-$(VERSION)" --section=1 + +man_MANS = as.1 +info_TEXINFOS = as.texinfo +AM_MAKEINFOFLAGS = -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" +TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" +CPU_DOCS = \ + c-alpha.texi \ + c-arc.texi \ + c-arm.texi \ + c-bfin.texi \ + c-d10v.texi \ + c-cris.texi \ + c-h8300.texi \ + c-hppa.texi \ + c-i370.texi \ + c-i386.texi \ + c-i860.texi \ + c-i960.texi \ + c-ip2k.texi \ + c-m32c.texi \ + c-m32r.texi \ + c-m68hc11.texi \ + c-m68k.texi \ + c-mips.texi \ + c-mmix.texi \ + c-mt.texi \ + c-msp430.texi \ + c-ns32k.texi \ + c-pdp11.texi \ + c-pj.texi \ + c-ppc.texi \ + c-sh.texi \ + c-sh64.texi \ + c-sparc.texi \ + c-tic54x.texi \ + c-vax.texi \ + c-v850.texi \ + c-xtensa.texi \ + c-z80.texi \ + c-z8k.texi + +html__strip_dir = `echo $$p | sed -e 's|^.*/||'`; + +# This one isn't ready for prime time yet. Not even a little bit. +noinst_TEXINFOS = internals.texi +MAINTAINERCLEANFILES = asconfig.texi gasver.texi +BASEDIR = $(srcdir)/../.. +BFDDIR = $(BASEDIR)/bfd +CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/configure.in +all: all-am + +.SUFFIXES: +.SUFFIXES: .dvi .html .info .pdf .ps .texinfo +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --foreign doc/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool + +.texinfo.info: + restore=: && backupdir="$(am__leading_dot)am$$$$" && \ + am__cwd=`pwd` && cd $(srcdir) && \ + rm -rf $$backupdir && mkdir $$backupdir && \ + if ($(MAKEINFO) --version) >/dev/null 2>&1; then \ + for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \ + if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \ + done; \ + else :; fi && \ + cd "$$am__cwd"; \ + if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ + -o $@ $<; \ + then \ + rc=0; \ + cd $(srcdir); \ + else \ + rc=$$?; \ + cd $(srcdir) && \ + $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \ + fi; \ + rm -rf $$backupdir; exit $$rc + +.texinfo.dvi: + TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ + MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ + $(TEXI2DVI) $< + +.texinfo.pdf: + TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ + MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ + $(TEXI2PDF) $< + +.texinfo.html: + rm -rf $(@:.html=.htp) + if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ + -o $(@:.html=.htp) $<; \ + then \ + rm -rf $@; \ + if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ + mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \ + else \ + if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ + rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \ + exit 1; \ + fi +$(srcdir)/as.info: as.texinfo +as.dvi: as.texinfo +as.pdf: as.texinfo +as.html: as.texinfo +.dvi.ps: + TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ + $(DVIPS) -o $@ $< + +uninstall-info-am: + @$(PRE_UNINSTALL) + @if (install-info --version && \ + install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \ + list='$(INFO_DEPS)'; \ + for file in $$list; do \ + relfile=`echo "$$file" | sed 's|^.*/||'`; \ + echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \ + install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \ + done; \ + else :; fi + @$(NORMAL_UNINSTALL) + @list='$(INFO_DEPS)'; \ + for file in $$list; do \ + relfile=`echo "$$file" | sed 's|^.*/||'`; \ + relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \ + (if cd "$(DESTDIR)$(infodir)"; then \ + echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \ + rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \ + else :; fi); \ + done + +dist-info: $(INFO_DEPS) + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + list='$(INFO_DEPS)'; \ + for base in $$list; do \ + case $$base in \ + $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \ + esac; \ + if test -f $$base; then d=.; else d=$(srcdir); fi; \ + for file in $$d/$$base*; do \ + relfile=`expr "$$file" : "$$d/\(.*\)"`; \ + test -f $(distdir)/$$relfile || \ + cp -p $$file $(distdir)/$$relfile; \ + done; \ + done + +mostlyclean-aminfo: + -rm -rf as.aux as.cp as.cps as.fn as.fns as.ky as.log as.pg as.pgs as.tmp \ + as.toc as.tp as.tps as.vr as.vrs as.dvi as.pdf as.ps as.html + +maintainer-clean-aminfo: + @list='$(INFO_DEPS)'; for i in $$list; do \ + i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \ + echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \ + rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \ + done + +clean-info: mostlyclean-aminfo +install-man1: $(man1_MANS) $(man_MANS) + @$(NORMAL_INSTALL) + test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)" + @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ + l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ + for i in $$l2; do \ + case "$$i" in \ + *.1*) list="$$list $$i" ;; \ + esac; \ + done; \ + for i in $$list; do \ + if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ + else file=$$i; fi; \ + ext=`echo $$i | sed -e 's/^.*\\.//'`; \ + case "$$ext" in \ + 1*) ;; \ + *) ext='1' ;; \ + esac; \ + inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ + inst=`echo $$inst | sed -e 's/^.*\///'`; \ + inst=`echo $$inst | sed '$(transform)'`.$$ext; \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \ + done +uninstall-man1: + @$(NORMAL_UNINSTALL) + @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ + l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ + for i in $$l2; do \ + case "$$i" in \ + *.1*) list="$$list $$i" ;; \ + esac; \ + done; \ + for i in $$list; do \ + ext=`echo $$i | sed -e 's/^.*\\.//'`; \ + case "$$ext" in \ + 1*) ;; \ + *) ext='1' ;; \ + esac; \ + inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ + inst=`echo $$inst | sed -e 's/^.*\///'`; \ + inst=`echo $$inst | sed '$(transform)'`.$$ext; \ + echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \ + rm -f "$(DESTDIR)$(man1dir)/$$inst"; \ + done +tags: TAGS +TAGS: + +ctags: CTAGS +CTAGS: + +check-am: +check: check-am +all-am: Makefile $(MANS) +installdirs: + for dir in "$(DESTDIR)$(man1dir)"; do \ + test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." + -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) +clean: clean-am + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-libtool + +dvi: dvi-am + +dvi-am: $(DVIS) + +html: html-am + +html-am: $(HTMLS) + +info: info-am + +info-am: $(INFO_DEPS) info-local + +install-data-am: install-data-local install-man + +install-exec-am: + +install-info: install-info-am + +install-info-am: $(INFO_DEPS) + @$(NORMAL_INSTALL) + test -z "$(infodir)" || $(mkdir_p) "$(DESTDIR)$(infodir)" + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + list='$(INFO_DEPS)'; \ + for file in $$list; do \ + case $$file in \ + $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ + esac; \ + if test -f $$file; then d=.; else d=$(srcdir); fi; \ + file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \ + for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \ + $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \ + if test -f $$ifile; then \ + relfile=`echo "$$ifile" | sed 's|^.*/||'`; \ + echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \ + $(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \ + else : ; fi; \ + done; \ + done + @$(POST_INSTALL) + @if (install-info --version && \ + install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \ + list='$(INFO_DEPS)'; \ + for file in $$list; do \ + relfile=`echo "$$file" | sed 's|^.*/||'`; \ + echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\ + install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\ + done; \ + else : ; fi +install-man: install-man1 + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-aminfo \ + maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \ + mostlyclean-libtool + +pdf: pdf-am + +pdf-am: $(PDFS) + +ps: ps-am + +ps-am: $(PSS) + +uninstall-am: uninstall-man + +uninstall-man: uninstall-man1 + +.PHONY: all all-am check check-am clean clean-generic clean-info \ + clean-libtool dist-info distclean distclean-generic \ + distclean-libtool dvi dvi-am html html-am info info-am \ + info-local install install-am install-data install-data-am \ + install-data-local install-exec install-exec-am install-info \ + install-info-am install-man install-man1 install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-aminfo maintainer-clean-generic mostlyclean \ + mostlyclean-aminfo mostlyclean-generic mostlyclean-libtool pdf \ + pdf-am ps ps-am uninstall uninstall-am uninstall-info-am \ + uninstall-man uninstall-man1 + + +asconfig.texi: $(CONFIG).texi + rm -f asconfig.texi + cp $(srcdir)/$(CONFIG).texi ./asconfig.texi + chmod u+w ./asconfig.texi + +gasver.texi: $(srcdir)/../../bfd/configure + rm -f $@ + eval `grep '^ *VERSION=' $(srcdir)/../../bfd/configure`; \ + echo "@set VERSION $$VERSION" > $@ + +$(srcdir)/as.info as.dvi as.html: $(srcdir)/as.texinfo asconfig.texi gasver.texi $(CPU_DOCS) + +# We want install to imply install-info as per GNU standards, despite the +# cygnus option. +install-data-local: install-info + +install-html: install-html-am + +install-html-am: $(HTMLS) + @$(NORMAL_INSTALL) + test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)" + @list='$(HTMLS)'; for p in $$list; do \ + if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \ + f=$(html__strip_dir) \ + if test -d "$$d$$p"; then \ + echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \ + $(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \ + echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \ + $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \ + else \ + echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \ + $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \ + fi; \ + done + +# Maintenance + +# We need it for the taz target in ../../Makefile.in. +info-local: $(MANS) + +# Build the man page from the texinfo file +# The sed command removes the no-adjust Nroff command so that +# the man output looks standard. +as.1: $(srcdir)/as.texinfo asconfig.texi gasver.texi $(CPU_DOCS) + touch $@ + -$(TEXI2POD) $(MANCONF) < $(srcdir)/as.texinfo > as.pod + -($(POD2MAN) as.pod | \ + sed -e '/^.if n .na/d' > $@.T$$$$ && \ + mv -f $@.T$$$$ $@) || \ + (rm -f $@.T$$$$ && exit 1) + rm -f as.pod +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: |