diff options
Diffstat (limited to 'Makefile.config.in')
| -rw-r--r-- | Makefile.config.in | 299 |
1 files changed, 299 insertions, 0 deletions
diff --git a/Makefile.config.in b/Makefile.config.in new file mode 100644 index 000000000000..efa8a0b87466 --- /dev/null +++ b/Makefile.config.in @@ -0,0 +1,299 @@ +#===-- Makefile.config - Local configuration for LLVM ------*- Makefile -*--===# +# +# The LLVM Compiler Infrastructure +# +# This file is distributed under the University of Illinois Open Source +# License. See LICENSE.TXT for details. +# +#===------------------------------------------------------------------------===# +# +# This file is included by Makefile.common. It defines paths and other +# values specific to a particular installation of LLVM. +# +#===------------------------------------------------------------------------===# + +# Define LLVM specific info and directories based on the autoconf variables +LLVMPackageName := @PACKAGE_NAME@ +LLVMVersion := @PACKAGE_VERSION@ +LLVM_CONFIGTIME := @LLVM_CONFIGTIME@ + +########################################################################### +# Directory Configuration +# This section of the Makefile determines what is where. To be +# specific, there are several locations that need to be defined: +# +# o LLVM_SRC_ROOT : The root directory of the LLVM source code. +# o LLVM_OBJ_ROOT : The root directory containing the built LLVM code. +# +# o PROJ_SRC_DIR : The directory containing the code to build. +# o PROJ_SRC_ROOT : The root directory of the code to build. +# +# o PROJ_OBJ_DIR : The directory in which compiled code will be placed. +# o PROJ_OBJ_ROOT : The root directory in which compiled code is placed. +# +########################################################################### + +PWD := @BINPWD@ +# Set the project name to LLVM if its not defined +ifndef PROJECT_NAME +PROJECT_NAME := $(LLVMPackageName) +endif + +PROJ_OBJ_DIR := $(shell $(PWD)) +PROJ_OBJ_ROOT := $(shell cd $(PROJ_OBJ_DIR)/$(LEVEL); $(PWD)) + +ifeq ($(PROJECT_NAME),llvm) +LLVM_SRC_ROOT := $(shell cd @abs_top_srcdir@; $(PWD)) +LLVM_OBJ_ROOT := $(shell cd @abs_top_builddir@; $(PWD)) +PROJ_SRC_ROOT := $(shell cd $(LLVM_SRC_ROOT); $(PWD)) +PROJ_SRC_DIR := $(shell cd $(LLVM_SRC_ROOT)/$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR)); $(PWD)) +prefix := @prefix@ +PROJ_prefix := $(prefix) +PROJ_VERSION := $(LLVMVersion) +else +ifndef PROJ_SRC_ROOT +$(error Projects must define PROJ_SRC_ROOT) +endif +ifndef PROJ_OBJ_ROOT +$(error Projects must define PROJ_OBJ_ROOT) +endif +ifndef PROJ_INSTALL_ROOT +$(error Projects must define PROJ_INSTALL_ROOT) +endif +ifndef LLVM_SRC_ROOT +$(error Projects must define LLVM_SRC_ROOT) +endif +ifndef LLVM_OBJ_ROOT +$(error Projects must define LLVM_OBJ_ROOT) +endif +PROJ_SRC_DIR := $(shell cd $(PROJ_SRC_ROOT)/$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR)); $(PWD)) +prefix := $(PROJ_INSTALL_ROOT) +PROJ_prefix := $(prefix) +ifndef PROJ_VERSION +PROJ_VERSION := 1.0 +endif +endif + +LLVMMAKE := $(LLVM_SRC_ROOT)/make + +PROJ_bindir := $(DESTDIR)$(PROJ_prefix)/bin +PROJ_libdir := $(DESTDIR)$(PROJ_prefix)/lib +PROJ_datadir := $(DESTDIR)$(PROJ_prefix)/share +PROJ_docsdir := $(DESTDIR)$(PROJ_prefix)/docs/llvm +PROJ_etcdir := $(DESTDIR)$(PROJ_prefix)/etc/llvm +PROJ_includedir := $(DESTDIR)$(PROJ_prefix)/include +PROJ_infodir := $(DESTDIR)$(PROJ_prefix)/info +PROJ_mandir := $(DESTDIR)$(PROJ_prefix)/share/man + +# Determine if we're on a unix type operating system +LLVM_ON_UNIX:=@LLVM_ON_UNIX@ +LLVM_ON_WIN32:=@LLVM_ON_WIN32@ + +# Target operating system for which LLVM will be compiled. +OS=@OS@ + +# Target hardware architecture +ARCH=@ARCH@ + +# Indicates, whether we're cross-compiling LLVM or not +LLVM_CROSS_COMPILING=@LLVM_CROSS_COMPILING@ + +# Executable file extension for build platform (mainly for +# tablegen call if we're cross-compiling). +BUILD_EXEEXT=@BUILD_EXEEXT@ + +# Compilers for the build platflorm (mainly for tablegen +# call if we're cross-compiling). +BUILD_CC=@BUILD_CC@ +BUILD_CXX=@BUILD_CXX@ + +# Target triple (cpu-vendor-os) for which we should generate code +TARGET_TRIPLE=@target@ + +# Extra options to compile LLVM with +EXTRA_OPTIONS=@EXTRA_OPTIONS@ + +# Endian-ness of the target +ENDIAN=@ENDIAN@ + +# Path to the C++ compiler to use. This is an optional setting, which defaults +# to whatever your gmake defaults to. +CXX = @CXX@ + +# Path to the CC binary, which use used by testcases for native builds. +CC := @CC@ + +# Linker flags. +LDFLAGS+=@LDFLAGS@ + +# Path to the library archiver program. +AR_PATH = @AR@ + +# Path to the nm program +NM_PATH = @NM@ + +# The pathnames of the programs we require to build +CMP := @CMP@ +CP := @CP@ +DATE := @DATE@ +FIND := @FIND@ +GREP := @GREP@ +INSTALL := @INSTALL@ +MKDIR := $(LLVM_SRC_ROOT)/autoconf/mkinstalldirs +MV := @MV@ +RANLIB := @RANLIB@ +RM := @RM@ +SED := @SED@ +TAR := @TAR@ + +# Paths to miscellaneous programs we hope are present but might not be +PERL := @PERL@ +BZIP2 := @BZIP2@ +DOT := @DOT@ +DOXYGEN := @DOXYGEN@ +GROFF := @GROFF@ +GZIP := @GZIP@ +OCAMLC := @OCAMLC@ +OCAMLOPT := @OCAMLOPT@ +OCAMLDEP := @OCAMLDEP@ +OCAMLDOC := @OCAMLDOC@ +GAS := @GAS@ +POD2HTML := @POD2HTML@ +POD2MAN := @POD2MAN@ +RUNTEST := @RUNTEST@ +TCLSH := @TCLSH@ +ZIP := @ZIP@ + +HAVE_PERL := @HAVE_PERL@ +HAVE_PTHREAD := @HAVE_PTHREAD@ + +LIBS := @LIBS@ + +# Targets that we should build +TARGETS_TO_BUILD=@TARGETS_TO_BUILD@ + +# Path to location for LLVM C/C++ front-end. You can modify this if you +# want to override the value set by configure. +LLVMGCCDIR := @LLVMGCCDIR@ + +# Determine the target for which LLVM should generate code. +ifeq (@LLVMGCC_MAJVERS@,3) +LLVMGCCARCH := @target@/3.4-llvm +else +LLVMGCCARCH := @target@/@LLVMGCC_VERSION@ +endif + +# Determine the path where the library executables are +LLVMGCCLIBEXEC := @LLVMGCCLIBEXEC@ + +# Full pathnames of LLVM C/C++ front-end 'cc1' and 'cc1plus' binaries: +LLVMGCC := @LLVMGCC@ +LLVMGXX := @LLVMGXX@ +LLVMCC1 := @LLVMCC1@ +LLVMCC1PLUS := @LLVMCC1PLUS@ +LLVMGCC_VERSION := @LLVMGCC_VERSION@ +LLVMGCC_MAJVERS := @LLVMGCC_MAJVERS@ +LLVMGCC_LANGS := @LLVMGCC_LANGS@ + +# Path to directory where object files should be stored during a build. +# Set OBJ_ROOT to "." if you do not want to use a separate place for +# object files. +OBJ_ROOT := . + +# What to pass as rpath flag to g++ +RPATH := @RPATH@ + +# What to pass as -rdynamic flag to g++ +RDYNAMIC := @RDYNAMIC@ + +# These are options that can either be enabled here, or can be enabled on the +# make command line (ie, make ENABLE_PROFILING=1): + +# When ENABLE_OPTIMIZED is enabled, LLVM code is optimized and output is put +# into the "Release" directories. Otherwise, LLVM code is not optimized and +# output is put in the "Debug" directories. +#ENABLE_OPTIMIZED = 1 +@ENABLE_OPTIMIZED@ + +# When ENABLE_PROFILING is enabled, profile instrumentation is done +# and output is put into the "<Flavor>+Profile" directories, where +# <Flavor> is either Debug or Release depending on how other builkd +# flags are set.. Otherwise, output is put in the <Flavor> +# directories. +#ENABLE_PROFILING = 1 +@ENABLE_PROFILING@ + +# When DISABLE_ASSERTIONS is enabled, builds of all of the LLVM code will +# exclude assertion checks, otherwise they are included. +#DISABLE_ASSERTIONS = 1 +@DISABLE_ASSERTIONS@ + +# When ENABLE_EXPENSIVE_CHECKS is enabled, builds of all of the LLVM +# code will include expensive checks, otherwise they are excluded. +#ENABLE_EXPENSIVE_CHECKS = 0 +@ENABLE_EXPENSIVE_CHECKS@ + +# When DEBUG_RUNTIME is enabled, the runtime libraries will retain debug +# symbols. +#DEBUG_RUNTIME = 1 +@DEBUG_RUNTIME@ + +# When ENABLE_PROFILING is enabled, the llvm source base is built with profile +# information to allow gprof to be used to get execution frequencies. +#ENABLE_PROFILING = 1 + +# When ENABLE_DOXYGEN is enabled, the doxygen documentation will be built +ENABLE_DOXYGEN = @ENABLE_DOXYGEN@ + +# Do we want to enable threads? +ENABLE_THREADS := @ENABLE_THREADS@ + +# Do we want to build with position independent code? +ENABLE_PIC := @ENABLE_PIC@ + +# Use -fvisibility-inlines-hidden? +ENABLE_VISIBILITY_INLINES_HIDDEN := @ENABLE_VISIBILITY_INLINES_HIDDEN@ + +# This option tells the Makefiles to produce verbose output. +# It essentially prints the commands that make is executing +#VERBOSE = 1 + +# Enable JIT for this platform +TARGET_HAS_JIT = @TARGET_HAS_JIT@ + +# Shared library extension for host platform. +SHLIBEXT = @SHLIBEXT@ + +# Executable file extension for host platform. +EXEEXT = @EXEEXT@ + +# Things we just assume are "there" +ECHO := echo + +# Get the options for causing archives to link all their content instead of +# just missing symbols, and the inverse of that. This is used for certain LLVM +# tools that permit loadable modules. It ensures that the LLVM symbols will be +# available to those loadable modules. +LINKALL := @LINKALL@ +NOLINKALL := @NOLINKALL@ + +# Get the value of HUGE_VAL_SANITY which will be either "yes" or "no" depending +# on the check. +HUGE_VAL_SANITY = @HUGE_VAL_SANITY@ + +# Bindings that we should build +BINDINGS_TO_BUILD := @BINDINGS_TO_BUILD@ +ALL_BINDINGS := @ALL_BINDINGS@ +OCAML_LIBDIR := @OCAML_LIBDIR@ + +# When compiling under Mingw/Cygwin, executables such as tblgen +# expect Windows paths, whereas the build system uses Unix paths. +# The function SYSPATH transforms Unix paths into Windows paths. +ifneq (,$(findstring -mno-cygwin, $(CXX))) + SYSPATH = $(shell echo $(1) | cygpath -m -f -) +else + SYSPATH = $(1) +endif + +# Location of the plugin header file for gold. +BINUTILS_INCDIR := @BINUTILS_INCDIR@ |