aboutsummaryrefslogtreecommitdiff
path: root/Bindings/usb
diff options
context:
space:
mode:
Diffstat (limited to 'Bindings/usb')
-rw-r--r--Bindings/usb/cdns,usb3.yaml15
-rw-r--r--Bindings/usb/dwc2.yaml2
-rw-r--r--Bindings/usb/fsl,usb2.yaml95
-rw-r--r--Bindings/usb/genesys,gl850g.yaml60
-rw-r--r--Bindings/usb/gpio-sbu-mux.yaml8
-rw-r--r--Bindings/usb/microchip,mpfs-musb.yaml7
-rw-r--r--Bindings/usb/microchip,usb2514.yaml10
-rw-r--r--Bindings/usb/qcom,dwc3.yaml29
8 files changed, 215 insertions, 11 deletions
diff --git a/Bindings/usb/cdns,usb3.yaml b/Bindings/usb/cdns,usb3.yaml
index 69a93a0722f0..f454ddd9bbaa 100644
--- a/Bindings/usb/cdns,usb3.yaml
+++ b/Bindings/usb/cdns,usb3.yaml
@@ -42,8 +42,11 @@ properties:
- const: otg
- const: wakeup
- dr_mode:
- enum: [host, otg, peripheral]
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ This port is used with the 'usb-role-switch' property to connect the
+ cdns3 to type C connector.
maximum-speed:
enum: [super-speed, high-speed, full-speed]
@@ -70,6 +73,9 @@ properties:
description: Enable resetting of PHY if Rx fail is detected
type: boolean
+dependencies:
+ port: [ usb-role-switch ]
+
required:
- compatible
- reg
@@ -77,7 +83,10 @@ required:
- interrupts
- interrupt-names
-additionalProperties: false
+allOf:
+ - $ref: usb-drd.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Bindings/usb/dwc2.yaml b/Bindings/usb/dwc2.yaml
index 4f36a22aa6d7..a5f2e3442a0e 100644
--- a/Bindings/usb/dwc2.yaml
+++ b/Bindings/usb/dwc2.yaml
@@ -188,7 +188,7 @@ required:
- clocks
- clock-names
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
diff --git a/Bindings/usb/fsl,usb2.yaml b/Bindings/usb/fsl,usb2.yaml
new file mode 100644
index 000000000000..caedf11db284
--- /dev/null
+++ b/Bindings/usb/fsl,usb2.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/fsl,usb2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale SOC USB controllers
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+description: |
+ The device node for a USB controller that is part of a Freescale
+ SOC is as described in the document "Open Firmware Recommended
+ Practice: Universal Serial Bus" with the following modifications
+ and additions.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - fsl-usb2-mph
+ - fsl-usb2-dr
+ - items:
+ - enum:
+ - fsl-usb2-dr-v2.2
+ - fsl-usb2-dr-v2.5
+ - const: fsl-usb2-dr
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ phy_type:
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ulpi, serial, utmi, utmi_wide]
+
+ port0:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Indicates port0 is connected for fsl-usb2-mph compatible controllers.
+
+ port1:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Indicates port1 is connected for "fsl-usb2-mph" compatible controllers.
+
+ fsl,invert-drvvbus:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ for MPC5121 USB0 only. Indicates the
+ port power polarity of internal PHY signal DRVVBUS is inverted.
+
+ fsl,invert-pwr-fault:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ for MPC5121 USB0 only. Indicates
+ the PWR_FAULT signal polarity is inverted.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - phy_type
+
+allOf:
+ - $ref: usb-drd.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ usb@22000 {
+ compatible = "fsl-usb2-mph";
+ reg = <22000 1000>;
+ interrupts = <27 IRQ_TYPE_EDGE_RISING>;
+ phy_type = "ulpi";
+ port0;
+ port1;
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ usb@23000 {
+ compatible = "fsl-usb2-dr";
+ reg = <23000 1000>;
+ interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+ dr_mode = "otg";
+ phy_type = "ulpi";
+ };
diff --git a/Bindings/usb/genesys,gl850g.yaml b/Bindings/usb/genesys,gl850g.yaml
index 37cf5249e526..fc833363cfb4 100644
--- a/Bindings/usb/genesys,gl850g.yaml
+++ b/Bindings/usb/genesys,gl850g.yaml
@@ -9,9 +9,6 @@ title: Genesys Logic USB hub controller
maintainers:
- Icenowy Zheng <uwu@icenowy.me>
-allOf:
- - $ref: usb-device.yaml#
-
properties:
compatible:
enum:
@@ -27,17 +24,44 @@ properties:
vdd-supply:
description:
- the regulator that provides 3.3V core power to the hub.
+ The regulator that provides 3.3V or 5.0V core power to the hub.
peer-hub:
$ref: /schemas/types.yaml#/definitions/phandle
description:
- phandle to the peer hub on the controller.
+ For onboard hub controllers that support USB 3.x and USB 2.0 hubs
+ with shared resets and power supplies, this property is used to identify
+ the hubs with which these are shared.
required:
- compatible
- reg
+allOf:
+ - $ref: usb-device.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - usb5e3,608
+ then:
+ properties:
+ peer-hub: false
+ vdd-supply: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - usb5e3,610
+ - usb5e3,620
+ then:
+ properties:
+ peer-hub: true
+ vdd-supply: true
+
additionalProperties: false
examples:
@@ -54,3 +78,29 @@ examples:
reset-gpios = <&pio 7 2 GPIO_ACTIVE_LOW>;
};
};
+
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ usb {
+ dr_mode = "host";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 2.0 hub on port 1 */
+ hub_2_0: hub@1 {
+ compatible = "usb5e3,610";
+ reg = <1>;
+ peer-hub = <&hub_3_0>;
+ reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&vcc_5v>;
+ };
+
+ /* 3.1 hub on port 4 */
+ hub_3_0: hub@2 {
+ compatible = "usb5e3,620";
+ reg = <2>;
+ peer-hub = <&hub_2_0>;
+ reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&vcc_5v>;
+ };
+ };
diff --git a/Bindings/usb/gpio-sbu-mux.yaml b/Bindings/usb/gpio-sbu-mux.yaml
index 88e1607cf053..8a5f837eff94 100644
--- a/Bindings/usb/gpio-sbu-mux.yaml
+++ b/Bindings/usb/gpio-sbu-mux.yaml
@@ -22,6 +22,7 @@ properties:
- nxp,cbdtu02043
- onnn,fsusb43l10x
- pericom,pi3usb102
+ - ti,tmuxhs4212
- const: gpio-sbu-mux
enable-gpios:
@@ -44,13 +45,18 @@ properties:
required:
- compatible
- - enable-gpios
- select-gpios
- orientation-switch
- port
allOf:
- $ref: usb-switch.yaml#
+ - if:
+ required:
+ - mode-switch
+ then:
+ required:
+ - enable-gpios
additionalProperties: false
diff --git a/Bindings/usb/microchip,mpfs-musb.yaml b/Bindings/usb/microchip,mpfs-musb.yaml
index c5e9ce2e7bc2..27b909de4992 100644
--- a/Bindings/usb/microchip,mpfs-musb.yaml
+++ b/Bindings/usb/microchip,mpfs-musb.yaml
@@ -34,6 +34,13 @@ properties:
clocks:
maxItems: 1
+ microchip,ext-vbus-drv:
+ description:
+ Some ULPI USB PHYs do not support an internal VBUS supply and driving
+ the CPEN pin requires the configuration of the UPLI_USE__EXTVBUS
+ bit in ULPI_BUSCONTROL.
+ $ref: /schemas/types.yaml#/definitions/flag
+
required:
- compatible
- reg
diff --git a/Bindings/usb/microchip,usb2514.yaml b/Bindings/usb/microchip,usb2514.yaml
index 783c27591e56..b14e6f37b298 100644
--- a/Bindings/usb/microchip,usb2514.yaml
+++ b/Bindings/usb/microchip,usb2514.yaml
@@ -10,7 +10,7 @@ maintainers:
- Fabio Estevam <festevam@gmail.com>
allOf:
- - $ref: usb-hcd.yaml#
+ - $ref: usb-device.yaml#
properties:
compatible:
@@ -18,6 +18,7 @@ properties:
- usb424,2412
- usb424,2417
- usb424,2514
+ - usb424,2517
reg: true
@@ -35,6 +36,13 @@ required:
- compatible
- reg
+patternProperties:
+ "^.*@[0-9a-f]{1,2}$":
+ description: The hard wired USB devices
+ type: object
+ $ref: /schemas/usb/usb-device.yaml
+ additionalProperties: true
+
unevaluatedProperties: false
examples:
diff --git a/Bindings/usb/qcom,dwc3.yaml b/Bindings/usb/qcom,dwc3.yaml
index cf633d488c3f..efde47a5b145 100644
--- a/Bindings/usb/qcom,dwc3.yaml
+++ b/Bindings/usb/qcom,dwc3.yaml
@@ -30,6 +30,8 @@ properties:
- qcom,sa8775p-dwc3
- qcom,sc7180-dwc3
- qcom,sc7280-dwc3
+ - qcom,sc8180x-dwc3
+ - qcom,sc8180x-dwc3-mp
- qcom,sc8280xp-dwc3
- qcom,sc8280xp-dwc3-mp
- qcom,sdm660-dwc3
@@ -334,6 +336,8 @@ allOf:
contains:
enum:
- qcom,qcm2290-dwc3
+ - qcom,sc8180x-dwc3
+ - qcom,sc8180x-dwc3-mp
- qcom,sm6115-dwc3
- qcom,sm6125-dwc3
- qcom,sm8150-dwc3
@@ -448,6 +452,7 @@ allOf:
- qcom,sa8775p-dwc3
- qcom,sc7180-dwc3
- qcom,sc7280-dwc3
+ - qcom,sc8180x-dwc3
- qcom,sc8280xp-dwc3
- qcom,sdm670-dwc3
- qcom,sdm845-dwc3
@@ -480,6 +485,30 @@ allOf:
compatible:
contains:
enum:
+ - qcom,sc8180x-dwc3-mp
+ then:
+ properties:
+ interrupts:
+ minItems: 10
+ maxItems: 10
+ interrupt-names:
+ items:
+ - const: pwr_event_1
+ - const: pwr_event_2
+ - const: hs_phy_1
+ - const: hs_phy_2
+ - const: dp_hs_phy_1
+ - const: dm_hs_phy_1
+ - const: dp_hs_phy_2
+ - const: dm_hs_phy_2
+ - const: ss_phy_1
+ - const: ss_phy_2
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
- qcom,sc8280xp-dwc3-mp
then:
properties:
generated by cgit v1.2.3 (git 2.25.1) at 2025-03-31 22:41:55 +0000