1 files changed, 63 insertions, 0 deletions
diff --git a/Bindings/regulator/rohm,bd96801-regulator.yaml b/Bindings/regulator/rohm,bd96801-regulator.yaml
new file mode 100644
index 000000000000..b3d2d7d583ce
--- /dev/null
+++ b/Bindings/regulator/rohm,bd96801-regulator.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/rohm,bd96801-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD96801 Power Management Integrated Circuit regulators
+
+maintainers:
+  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+description:
+  This module is part of the ROHM BD96801 MFD device. For more details
+  see Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml.
+
+  The regulator controller is represented as a sub-node of the PMIC node
+  on the device tree.
+
+  Regulator nodes should be named to buck_<number> and ldo_<number>.
+  The valid names for BD96801 regulator nodes are
+  buck1, buck2, buck3, buck4, ldo5, ldo6, ldo7
+
+patternProperties:
+  "^ldo[5-7]$":
+    type: object
+    description:
+      Properties for single LDO regulator.
+    $ref: regulator.yaml#
+
+    properties:
+      rohm,initial-voltage-microvolt:
+        description:
+          Initial voltage for regulator. Voltage can be tuned +/-150 mV from
+          this value. NOTE, This can be modified via I2C only when PMIC is in
+          STBY state.
+        minimum: 300000
+        maximum: 3300000
+
+    unevaluatedProperties: false
+
+  "^buck[1-4]$":
+    type: object
+    description:
+      Properties for single BUCK regulator.
+    $ref: regulator.yaml#
+
+    properties:
+      rohm,initial-voltage-microvolt:
+        description:
+          Initial voltage for regulator. Voltage can be tuned +/-150 mV from
+          this value. NOTE, This can be modified via I2C only when PMIC is in
+          STBY state.
+        minimum: 500000
+        maximum: 3300000
+
+      rohm,keep-on-stby:
+        description:
+          Keep the regulator powered when PMIC transitions to STBY state.
+        type: boolean
+
+    unevaluatedProperties: false
+
+additionalProperties: false